qmk_firmware/keyboards/ergodox_ez/ergodox_ez.c

#include "ergodox_ez.h"

extern inline void ergodox_board_led_on(void);
extern inline void ergodox_right_led_1_on(void);
extern inline void ergodox_right_led_2_on(void);
extern inline void ergodox_right_led_3_on(void);
extern inline void ergodox_right_led_on(uint8_t led);

extern inline void ergodox_board_led_off(void);
extern inline void ergodox_right_led_1_off(void);
extern inline void ergodox_right_led_2_off(void);
extern inline void ergodox_right_led_3_off(void);
extern inline void ergodox_right_led_off(uint8_t led);

extern inline void ergodox_led_all_on(void);
extern inline void ergodox_led_all_off(void);

extern inline void ergodox_right_led_1_set(uint8_t n);
extern inline void ergodox_right_led_2_set(uint8_t n);
extern inline void ergodox_right_led_3_set(uint8_t n);
extern inline void ergodox_right_led_set(uint8_t led, uint8_t n);

extern inline void ergodox_led_all_set(uint8_t n);

keyboard_config_t keyboard_config;

bool i2c_initialized = 0;
i2c_status_t mcp23018_status = 0x20;

void matrix_init_kb(void) {
   // keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md")
    TCCR1A = 0b10101001;  // set and configure fast PWM
    TCCR1B = 0b00001001;  // set and configure fast PWM

    // (tied to Vcc for hardware convenience)
    DDRB  &= ~(1<<4);  // set B(4) as input
    PORTB &= ~(1<<4);  // set B(4) internal pull-up disabled

    // unused pins - C7, D4, D5, D7, E6
    // set as input with internal pull-up enabled
    DDRC  &= ~(1<<7);
    DDRD  &= ~(1<<5 | 1<<4);
    DDRE  &= ~(1<<6);
    PORTC |=  (1<<7);
    PORTD |=  (1<<5 | 1<<4);
    PORTE |=  (1<<6);

    keyboard_config.raw = eeconfig_read_kb();
    ergodox_led_all_set((uint8_t)keyboard_config.led_level * 255 / 4 );
#ifdef RGB_MATRIX_ENABLE
    if (keyboard_config.rgb_matrix_enable) {
        rgb_matrix_set_flags(LED_FLAG_ALL);
    } else {
        rgb_matrix_set_flags(LED_FLAG_NONE);
    }
#endif

    ergodox_blink_all_leds();

    matrix_init_user();
}

void ergodox_blink_all_leds(void)
{
    ergodox_led_all_off();
    ergodox_led_all_set(LED_BRIGHTNESS_DEFAULT);
    ergodox_right_led_1_on();
    _delay_ms(50);
    ergodox_right_led_2_on();
    _delay_ms(50);
    ergodox_right_led_3_on();
    _delay_ms(50);
#ifdef LEFT_LEDS
    ergodox_left_led_1_on();
    _delay_ms(50);
    if (!mcp23018_status) {
      mcp23018_status = ergodox_left_leds_update();
    }
    ergodox_left_led_2_on();
    _delay_ms(50);
    if (!mcp23018_status) {
      mcp23018_status = ergodox_left_leds_update();
    }
    ergodox_left_led_3_on();
    _delay_ms(50);
    if (!mcp23018_status) {
      mcp23018_status = ergodox_left_leds_update();
    }
#endif
    ergodox_right_led_1_off();
    _delay_ms(50);
    ergodox_right_led_2_off();
    _delay_ms(50);
    ergodox_right_led_3_off();
#ifdef LEFT_LEDS
    _delay_ms(50);
    ergodox_left_led_1_off();
    if (!mcp23018_status) {
      mcp23018_status = ergodox_left_leds_update();
    }
    _delay_ms(50);
    ergodox_left_led_2_off();
    if (!mcp23018_status) {
      mcp23018_status = ergodox_left_leds_update();
    }
    _delay_ms(50);
    ergodox_left_led_3_off();
    if (!mcp23018_status) {
      mcp23018_status = ergodox_left_leds_update();
    }
#endif

    //ergodox_led_all_on();
    //_delay_ms(333);
    ergodox_led_all_off();
}

uint8_t init_mcp23018(void) {
    mcp23018_status = 0x20;

    // I2C subsystem

    // uint8_t sreg_prev;
    // sreg_prev=SREG;
    // cli();

    if (i2c_initialized == 0) {
        i2c_init();  // on pins D(1,0)
        i2c_initialized = true;
        _delay_ms(1000);
    }
    // i2c_init(); // on pins D(1,0)
    // _delay_ms(1000);

    // set pin direction
    // - unused  : input  : 1
    // - input   : input  : 1
    // - driving : output : 0
    mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);    if (mcp23018_status) goto out;
    mcp23018_status = i2c_write(IODIRA, ERGODOX_EZ_I2C_TIMEOUT);            if (mcp23018_status) goto out;
    mcp23018_status = i2c_write(0b00000000, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
    mcp23018_status = i2c_write(0b00111111, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
    i2c_stop();

    // set pull-up
    // - unused  : on  : 1
    // - input   : on  : 1
    // - driving : off : 0
    mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);    if (mcp23018_status) goto out;
    mcp23018_status = i2c_write(GPPUA, ERGODOX_EZ_I2C_TIMEOUT);             if (mcp23018_status) goto out;
    mcp23018_status = i2c_write(0b00000000, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;
    mcp23018_status = i2c_write(0b00111111, ERGODOX_EZ_I2C_TIMEOUT);        if (mcp23018_status) goto out;

out:
    i2c_stop();

#ifdef LEFT_LEDS
    if (!mcp23018_status) mcp23018_status = ergodox_left_leds_update();
#endif // LEFT_LEDS

    // SREG=sreg_prev;

    return mcp23018_status;
}

#ifdef LEFT_LEDS
uint8_t ergodox_left_leds_update(void) {
    if (mcp23018_status) { // if there was an error
        return mcp23018_status;
    }
#define LEFT_LED_1_SHIFT        7       // in MCP23018 port B
#define LEFT_LED_2_SHIFT        6       // in MCP23018 port B
#define LEFT_LED_3_SHIFT        7       // in MCP23018 port A

    // set logical value (doesn't matter on inputs)
    // - unused  : hi-Z : 1
    // - input   : hi-Z : 1
    // - driving : hi-Z : 1
    mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);
    if (mcp23018_status) goto out;
    mcp23018_status = i2c_write(OLATA, ERGODOX_EZ_I2C_TIMEOUT);
    if (mcp23018_status) goto out;
    mcp23018_status = i2c_write(0b11111111
                                & ~(ergodox_left_led_3<<LEFT_LED_3_SHIFT),
                                ERGODOX_EZ_I2C_TIMEOUT);
    if (mcp23018_status) goto out;
    mcp23018_status = i2c_write(0b11111111
                                & ~(ergodox_left_led_2<<LEFT_LED_2_SHIFT)
                                & ~(ergodox_left_led_1<<LEFT_LED_1_SHIFT),
                                ERGODOX_EZ_I2C_TIMEOUT);
    if (mcp23018_status) goto out;

 out:
    i2c_stop();
    return mcp23018_status;
}
#endif


#ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak))
// swap-hands action needs a matrix to define the swap
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
    /* Left hand, matrix positions */
    {{0,13}, {1,13}, {2,13}, {3,13}, {4,13}, {5,13}},
    {{0,12}, {1,12}, {2,12}, {3,12}, {4,12}, {5,12}},
    {{0,11}, {1,11}, {2,11}, {3,11}, {4,11}, {5,11}},
    {{0,10}, {1,10}, {2,10}, {3,10}, {4,10}, {5,10}},
    {{0,9}, {1,9}, {2,9}, {3,9}, {4,9}, {5,9}},
    {{0,8}, {1,8}, {2,8}, {3,8}, {4,8}, {5,8}},
    {{0,7}, {1,7}, {2,7}, {3,7}, {4,7}, {5,7}},
    /* Right hand, matrix positions */
    {{0,6}, {1,6}, {2,6}, {3,6}, {4,6}, {5,6}},
    {{0,5}, {1,5}, {2,5}, {3,5}, {4,5}, {5,5}},
    {{0,4}, {1,4}, {2,4}, {3,4}, {4,4}, {5,4}},
    {{0,3}, {1,3}, {2,3}, {3,3}, {4,3}, {5,3}},
    {{0,2}, {1,2}, {2,2}, {3,2}, {4,2}, {5,2}},
    {{0,1}, {1,1}, {2,1}, {3,1}, {4,1}, {5,1}},
    {{0,0}, {1,0}, {2,0}, {3,0}, {4,0}, {5,0}},
};
#endif

#ifdef RGB_MATRIX_ENABLE
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
/*   driver
 *   |  R location
 *   |  |      G location
 *   |  |      |      B location
 *   |  |      |      | */
    {0, C3_1,  C2_1,  C4_1}, // LED1 on right
    {0, C6_1,  C5_1,  C7_1}, // LED2
    {0, C4_2,  C3_2,  C5_2}, // LED3
    {0, C7_2,  C6_2,  C8_2}, // LED4
    {0, C2_3,  C1_3,  C3_3}, // LED5
    {0, C5_3,  C4_3,  C6_3}, // LED6
    {0, C8_3,  C7_3,  C9_3}, // LED7
    {0, C2_4,  C1_4,  C3_4}, // LED8
    {0, C6_4,  C5_4,  C7_4}, // LED9
    {0, C2_5,  C1_5,  C3_5}, // LED10
    {0, C7_5,  C6_5,  C8_5}, // LED11
    {0, C2_6,  C1_6,  C3_6}, // LED12
    {0, C5_6,  C4_6,  C6_6}, // LED13
    {0, C8_6,  C7_6,  C9_6}, // LED14
    {0, C2_7,  C1_7,  C3_7}, // LED15
    {0, C5_7,  C4_7,  C6_7}, // LED16
    {0, C2_8,  C1_8,  C3_8}, // LED17
    {0, C5_8,  C4_8,  C6_8}, // LED18

    {0, C3_9,  C2_9,  C4_9}, // LED19
    {0, C6_9,  C5_9,  C7_9}, // LED20
    {0, C4_10, C3_10, C5_10}, // LED21
    {0, C7_10, C6_10, C8_10}, // LED22
    {0, C2_11, C1_11, C3_11}, // LED23
    {0, C5_11, C4_11, C6_11}, // LED24

    {1, C3_1,  C2_1,  C4_1}, // LED1 on left
    {1, C6_1,  C5_1,  C7_1}, // LED2
    {1, C4_2,  C3_2,  C5_2}, // LED3
    {1, C7_2,  C6_2,  C8_2}, // LED4
    {1, C2_3,  C1_3,  C3_3}, // LED5
    {1, C5_3,  C4_3,  C6_3}, // LED6
    {1, C8_3,  C7_3,  C9_3}, // LED7
    {1, C2_4,  C1_4,  C3_4}, // LED8
    {1, C6_4,  C5_4,  C7_4}, // LED9
    {1, C2_5,  C1_5,  C3_5}, // LED10
    {1, C7_5,  C6_5,  C8_5}, // LED11
    {1, C2_6,  C1_6,  C3_6}, // LED12
    {1, C5_6,  C4_6,  C6_6}, // LED13
    {1, C8_6,  C7_6,  C9_6}, // LED14
    {1, C2_7,  C1_7,  C3_7}, // LED15
    {1, C5_7,  C4_7,  C6_7}, // LED16
    {1, C2_8,  C1_8,  C3_8}, // LED17
    {1, C5_8,  C4_8,  C6_8}, // LED18

    {1, C3_9,  C2_9,  C4_9}, // LED19
    {1, C6_9,  C5_9,  C7_9}, // LED20
    {1, C4_10, C3_10, C5_10}, // LED21
    {1, C7_10, C6_10, C8_10}, // LED22
    {1, C2_11, C1_11, C3_11}, // LED23
    {1, C5_11, C4_11, C6_11} // LED24
};


led_config_t g_led_config = { {
    { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
    {  28,  33,  38,  43,  47, NO_LED },
    {  27,  32,  37,  42,  46, NO_LED },
    {  26,  31,  36,  41,  45, NO_LED },
    {  25,  30,  35,  40,  44, NO_LED },
    {  24,  29,  34,  39, NO_LED, NO_LED },
    { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
    { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED },
    {   0,   5,  10,  15, NO_LED, NO_LED },
    {   1,   6,  11,  16,  20, NO_LED },
    {   2,   7,  12,  17,  21, NO_LED },
    {   3,   8,  13,  18,  22, NO_LED },
    {   4,   9,  14,  19,  23, NO_LED },
    { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }
}, {
    { 137,   0 }, { 154,   0 }, { 172,   0 }, { 189,   0 }, { 206,   0 }, { 137,  12 },
    { 154,  12 }, { 172,  12 }, { 189,  12 }, { 206,  12 }, { 137,  25 }, { 154,  25 },
    { 172,  25 }, { 189,  25 }, { 206,  25 }, { 137,  38 }, { 154,  38 }, { 172,  38 },
    { 189,  38 }, { 206,  38 }, { 154,  51 }, { 172,  51 }, { 189,  51 }, { 206,  51 },
    {  86,   0 }, {  68,   0 }, {  51,   0 }, {  34,   0 }, {  17,   0 }, {  86,  12 },
    {  68,  12 }, {  51,  12 }, {  34,  12 }, {  17,  12 }, {  86,  25 }, {  68,  25 },
    {  51,  25 }, {  34,  25 }, {  17,  25 }, {  86,  38 }, {  68,  38 }, {  51,  38 },
    {  34,  38 }, {  17,  38 }, {  68,  51 }, {  51,  51 }, {  34,  51 }, {  17,  51 }
}, {
    4, 4, 4, 4, 4, 4,
    4, 4, 4, 4, 4, 4,
    4, 4, 4, 4, 4, 4,
    4, 4, 1, 1, 1, 1,
    4, 4, 4, 4, 4, 4,
    4, 4, 4, 4, 4, 4,
    4, 4, 4, 4, 4, 4,
    4, 4, 1, 1, 1, 1
} };

void suspend_power_down_kb(void) {
    rgb_matrix_set_color_all(0, 0, 0);
    rgb_matrix_set_suspend_state(true);
    suspend_power_down_user();
}

 void suspend_wakeup_init_kb(void) {
    rgb_matrix_set_suspend_state(false);
    suspend_wakeup_init_user();
}

#ifdef ORYX_CONFIGURATOR
void keyboard_post_init_kb(void) {
    rgb_matrix_enable_noeeprom();
    keyboard_post_init_user();
}
#endif
#endif

#ifdef ORYX_CONFIGURATOR
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
    switch (keycode) {
        case LED_LEVEL:
            if (record->event.pressed) {
                 keyboard_config.led_level++;
                 if (keyboard_config.led_level > 4) {
                    keyboard_config.led_level = 0;
                 }
                 ergodox_led_all_set((uint8_t)keyboard_config.led_level * 255 / 4 );
                 eeconfig_update_kb(keyboard_config.raw);
                 layer_state_set_kb(layer_state);
            }
            break;
#ifdef RGB_MATRIX_ENABLE
        case TOGGLE_LAYER_COLOR:
            if (record->event.pressed) {
                keyboard_config.disable_layer_led ^= 1;
                if (keyboard_config.disable_layer_led)
                    rgb_matrix_set_color_all(0, 0, 0);
                eeconfig_update_kb(keyboard_config.raw);
            }
            break;
        case RGB_TOG:
            if (record->event.pressed) {
              switch (rgb_matrix_get_flags()) {
                case LED_FLAG_ALL: {
                    rgb_matrix_set_flags(LED_FLAG_NONE);
                    keyboard_config.rgb_matrix_enable = false;
                    rgb_matrix_set_color_all(0, 0, 0);
                  }
                  break;
                default: {
                    rgb_matrix_set_flags(LED_FLAG_ALL);
                    keyboard_config.rgb_matrix_enable = true;
                  }
                  break;
              }
              eeconfig_update_kb(keyboard_config.raw);
            }
            return false;
#endif
    }
    return process_record_user(keycode, record);
}
#endif

void eeconfig_init_kb(void) {  // EEPROM is getting reset!
    keyboard_config.raw = 0;
    keyboard_config.led_level = 4;
    keyboard_config.rgb_matrix_enable = true;
    eeconfig_update_kb(keyboard_config.raw);
    eeconfig_init_user();
}