qmk_firmware/keyboards/sawnsprojects/krush/krush65/readme.md

# Krush65

A 65% keyboard sold in several variants. 

1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush65" with krush keyboard case. Compatible with some KBD67 case.

 **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.

* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)
* Hardware Supported: Krush65 
* Hardware Availability: [Mechkey.store](https://mechkey.store/)

Make examples for this keyboard (after setting up your build environment):

    make sawnsprojects/krush/krush65/solder:default

## Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
[Keyboard] Added Krush Solder (60% & 65%) (#15074) 2021-11-11 05:30:27 +01:00			`# Krush65`

			`A 65% keyboard sold in several variants.`

			`1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush65" with krush keyboard case. Compatible with some KBD67 case.`

			Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other. Please use the `.hex` or `.bin` appropriate for your board.

			`* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)`
			`* Hardware Supported: Krush65`
			`* Hardware Availability: [Mechkey.store](https://mechkey.store/)`

			`Make examples for this keyboard (after setting up your build environment):`

			`make sawnsprojects/krush/krush65/solder:default`

			`## Bootloader`

			`Enter the bootloader in 3 ways:`

			`* Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard`
			`* Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead`
RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 12:34:17 +02:00			* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available
[Keyboard] Added Krush Solder (60% & 65%) (#15074) 2021-11-11 05:30:27 +01:00
			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`