From 5d5cbb877da3a7f27f1c96948d240317e6263388 Mon Sep 17 00:00:00 2001 From: Ryan Date: Mon, 8 Feb 2021 07:45:59 +1100 Subject: [PATCH 1/2] Rework I2C driver docs (#11658) --- docs/i2c_driver.md | 322 ++++++++++++++++++++++++++++++--------------- docs/spi_driver.md | 42 +++--- 2 files changed, 240 insertions(+), 124 deletions(-) diff --git a/docs/i2c_driver.md b/docs/i2c_driver.md index 0103e1b4ccc..3ec34a0f87f 100644 --- a/docs/i2c_driver.md +++ b/docs/i2c_driver.md @@ -2,132 +2,236 @@ The I2C Master drivers used in QMK have a set of common functions to allow portability between MCUs. -## An important note on I2C Addresses :id=note-on-i2c-addresses +## I2C Addressing :id=note-on-i2c-addresses -All of the addresses expected by this driver should be pushed to the upper 7 bits of the address byte. Setting -the lower bit (indicating read/write) will be done by the respective functions. Almost all I2C addresses listed +All of the addresses expected by this driver should be pushed to the upper 7 bits of the address byte. Setting +the lower bit (indicating read/write) will be done by the respective functions. Almost all I2C addresses listed on datasheets and the internet will be represented as 7 bits occupying the lower 7 bits and will need to be -shifted to the left (more significant) by one bit. This is easy to do via the bitwise shift operator `<< 1`. +shifted to the left (more significant) by one bit. This is easy to do via the bitwise shift operator `<< 1`. -You can either do this on each call to the functions below, or once in your definition of the address. For example if your device has an address of `0x18`: +You can either do this on each call to the functions below, or once in your definition of the address. For example, if your device has an address of `0x18`: -`#define MY_I2C_ADDRESS (0x18 << 1)` +```c +#define MY_I2C_ADDRESS (0x18 << 1) +``` See https://www.robot-electronics.co.uk/i2c-tutorial for more information about I2C addressing and other technical details. -## Available functions :id=available-functions +## AVR Configuration :id=avr-configuration -|Function |Description | -|------------------------------------------------------------------------------------------------------------------|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------| -|`void i2c_init(void);` |Initializes the I2C driver. This function should be called once before any transaction is initiated. | -|`i2c_status_t i2c_start(uint8_t address, uint16_t timeout);` |Starts an I2C transaction. Address is the 7-bit slave address without the direction bit. | -|`i2c_status_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);` |Transmit data over I2C. Address is the 7-bit slave address without the direction. Returns status of transaction. | -|`i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout);` |Receive data over I2C. Address is the 7-bit slave address without the direction. Saves number of bytes specified by `length` in `data` array. Returns status of transaction. | -|`i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);` |Same as the `i2c_transmit` function but `regaddr` sets where in the slave the data will be written. | -|`i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout);` |Same as the `i2c_receive` function but `regaddr` sets from where in the slave the data will be read. | -|`i2c_status_t i2c_stop(void);` |Ends an I2C transaction. | +The following defines can be used to configure the I2C master driver: -### Function Return :id=function-return +|`config.h` Override|Description |Default | +|-------------------|---------------------|--------| +|`F_SCL` |Clock frequency in Hz|`400000`| -All the above functions, except `void i2c_init(void);` return the following truth table: +No further setup is required - just connect the `SDA` and `SCL` pins of your I2C devices to the matching pins on the MCU: -|Return Constant |Value|Description | -|--------------------|-----|--------------------------------| -|`I2C_STATUS_SUCCESS`|0 |Operation executed successfully.| -|`I2C_STATUS_ERROR` |-1 |Operation failed. | -|`I2C_STATUS_TIMEOUT`|-2 |Operation timed out. | +|MCU |`SCL`|`SDA`| +|------------------|-----|-----| +|ATmega16/32U4 |`D0` |`D1` | +|AT90USB64/128 |`D0` |`D1` | +|ATmega32A |`C0` |`C1` | +|ATmega328/P |`C5` |`C4` | +?> The ATmega16/32U2 does not possess I2C functionality, and so cannot use this driver. -## AVR :id=avr +## ChibiOS/ARM Configuration :id=arm-configuration -### Configuration :id=avr-configuration +You'll need to determine which pins can be used for I2C -- a an example, STM32 parts generally have multiple I2C peripherals, labeled I2C1, I2C2, I2C3 etc. -The following defines can be used to configure the I2C master driver. - -|Variable |Description |Default| -|------------------|---------------------------------------------------|-------| -|`F_SCL` |Clock frequency in Hz |400KHz | - -AVRs usually have set GPIO which turn into I2C pins, therefore no further configuration is required. - -## ARM :id=arm - -For ARM the Chibios I2C HAL driver is under the hood. -This section assumes an STM32 MCU. - -### Configuration :id=arm-configuration - -The configuration for ARM MCUs can be quite complex as often there are multiple I2C drivers which can be assigned to a variety of ports. - -Firstly the `mcuconf.h` file must be setup to enable the necessary hardware drivers. - -|Variable |Description |Default| -|------------------------------|------------------------------------------------------------------------------------|-------| -|`#STM32_I2C_USE_XXX` |Enable/Disable the hardware driver XXX (each driver should be explicitly listed) |FALSE | -|`#STM32_I2C_BUSY_TIMEOUT` |Time in ms until the I2C command is aborted if no response is received |50 | -|`#STM32_I2C_XXX_IRQ_PRIORITY` |Interrupt priority for hardware driver XXX (THIS IS AN EXPERT SETTING) |10 | -|`#STM32_I2C_USE_DMA` |Enable/Disable the ability of the MCU to offload the data transfer to the DMA unit |TRUE | -|`#STM32_I2C_XXX_DMA_PRIORITY` |Priority of DMA unit for hardware driver XXX (THIS IS AN EXPERT SETTING) |1 | - -Secondly, in the `halconf.h` file, `#define HAL_USE_I2C` must be set to `TRUE`. This allows ChibiOS to load its I2C driver. - -Lastly, we need to assign the correct GPIO pins depending on the I2C hardware driver we want to use. - -By default the I2C1 hardware driver is assumed to be used. If another hardware driver is used, `#define I2C_DRIVER I2CDX` should be added to the `config.h` file with X being the number of hardware driver used. For example is I2C3 is enabled, the `config.h` file should contain `#define I2C_DRIVER I2CD3`. This aligns the QMK I2C driver with the Chibios I2C driver. - -STM32 MCUs allows a variety of pins to be configured as I2C pins depending on the hardware driver used. By default B6 and B7 are set to I2C. You can use these defines to set your i2c pins: - -| Variable | Description | Default | -|--------------------------|----------------------------------------------------------------------------------------------|---------| -| `I2C1_SCL_BANK` | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) to use for SCL | `GPIOB` | -| `I2C1_SDA_BANK` | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) to use for SDA | `GPIOB` | -| `I2C1_SCL` | The pin number for the SCL pin (0-15) | `6` | -| `I2C1_SDA` | The pin number for the SDA pin (0-15) | `7` | -| `I2C1_BANK` (deprecated) | The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`), superceded by `I2C1_SCL_BANK`, `I2C1_SDA_BANK` | `GPIOB` | - -The ChibiOS I2C driver configuration depends on STM32 MCU: - - STM32F1xx, STM32F2xx, STM32F4xx, STM32L0xx and STM32L1xx use I2Cv1; - STM32F0xx, STM32F3xx, STM32F7xx and STM32L4xx use I2Cv2; - -#### I2Cv1 :id=i2cv1 -STM32 MCUs allow for different clock and duty parameters when configuring I2Cv1. These can be modified using the following parameters, using as a reference: - -| Variable | Default | -|--------------------|------------------| -| `I2C1_OPMODE` | `OPMODE_I2C` | -| `I2C1_CLOCK_SPEED` | `100000` | -| `I2C1_DUTY_CYCLE` | `STD_DUTY_CYCLE` | - -#### I2Cv2 :id=i2cv2 -STM32 MCUs allow for different timing parameters when configuring I2Cv2. These can be modified using the following parameters, using as a reference: - -| Variable | Default | -|-----------------------|---------| -| `I2C1_TIMINGR_PRESC` | `15U` | -| `I2C1_TIMINGR_SCLDEL` | `4U` | -| `I2C1_TIMINGR_SDADEL` | `2U` | -| `I2C1_TIMINGR_SCLH` | `15U` | -| `I2C1_TIMINGR_SCLL` | `21U` | - -STM32 MCUs allow for different "alternate function" modes when configuring GPIO pins. These are required to switch the pins used to I2Cv2 mode. See the respective datasheet for the appropriate values for your MCU. - -| Variable | Default | -|---------------------|---------| -| `I2C1_SCL_PAL_MODE` | `4` | -| `I2C1_SDA_PAL_MODE` | `4` | - -#### Other :id=other -You can also overload the `void i2c_init(void)` function, which has a weak attribute. If you do this the configuration variables above will not be used. Please consult the datasheet of your MCU for the available GPIO configurations. The following is an example initialization function: +To enable I2C, modify your board's `halconf.h` to enable I2C: ```c -void i2c_init(void) -{ - setPinInput(B6); // Try releasing special pins for a short time - setPinInput(B7); - wait_ms(10); // Wait for the release to happen +#define HAL_USE_I2C TRUE +``` - palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B6 to I2C function - palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B7 to I2C function +Then, modify your board's `mcuconf.h` to enable the peripheral you've chosen, for example: + +```c +#undef STM32_I2C_USE_I2C2 +#define STM32_I2C_USE_I2C2 TRUE +``` + +|`mcuconf.h` Setting |Description |Default| +|----------------------------|----------------------------------------------------------------------------------|-------| +|`STM32_I2C_BUSY_TIMEOUT` |Time in milliseconds until the I2C command is aborted if no response is received |`50` | +|`STM32_I2C_XXX_IRQ_PRIORITY`|Interrupt priority for hardware driver XXX (THIS IS AN EXPERT SETTING) |`10` | +|`STM32_I2C_USE_DMA` |Enable/Disable the ability of the MCU to offload the data transfer to the DMA unit|`TRUE` | +|`STM32_I2C_XXX_DMA_PRIORITY`|Priority of DMA unit for hardware driver XXX (THIS IS AN EXPERT SETTING) |`1` | + +Configuration-wise, you'll need to set up the peripheral as per your MCU's datasheet -- the defaults match the pins for a Proton-C, i.e. STM32F303. + +|`config.h` Overrride |Description |Default| +|------------------------|-------------------------------------------------------------------------------------------|-------| +|`I2C_DRIVER` |I2C peripheral to use - I2C1 -> `I2CD1`, I2C2 -> `I2CD2` etc. |`I2CD1`| +|`I2C1_BANK` (deprecated)|The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`), superseded by `I2C1_SCL_BANK`/`I2C1_SDA_BANK`|`GPIOB`| +|`I2C1_SCL_BANK` |The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) to use for SCL |`GPIOB`| +|`I2C1_SCL` |The pin number for SCL (0-15) |`6` | +|`I2C1_SCL_PAL_MODE` |The alternate function mode for SCL |`4` | +|`I2C1_SDA_BANK` |The bank of pins (`GPIOA`, `GPIOB`, `GPIOC`) to use for SDA |`GPIOB`| +|`I2C1_SDA` |The pin number for SDA (0-15) |`7` | +|`I2C1_SDA_PAL_MODE` |The alternate function mode for SDA |`4` | + +The following configuration values depend on the specific MCU in use. + +### I2Cv1 :id=i2cv1 + +* STM32F1xx +* STM32F2xx +* STM32F4xx +* STM32L0xx +* STM32L1xx + +See [this page](https://www.playembedded.org/blog/stm32-i2c-chibios/#7_I2Cv1_configuration_structure) for the I2Cv1 configuration structure. + +|`config.h` Override|Default | +|-------------------|----------------| +|`I2C1_OPMODE` |`OPMODE_I2C` | +|`I2C1_CLOCK_SPEED` |`100000` | +|`I2C1_DUTY_CYCLE` |`STD_DUTY_CYCLE`| + +### I2Cv2 :id=i2cv2 + +* STM32F0xx +* STM32F3xx +* STM32F7xx +* STM32L4xx + +See [this page](https://www.playembedded.org/blog/stm32-i2c-chibios/#8_I2Cv2_I2Cv3_configuration_structure) for the I2Cv2 configuration structure. + +|`config.h` Override |Default| +|---------------------|-------| +|`I2C1_TIMINGR_PRESC` |`0U` | +|`I2C1_TIMINGR_SCLDEL`|`7U` | +|`I2C1_TIMINGR_SDADEL`|`0U` | +|`I2C1_TIMINGR_SCLH` |`38U` | +|`I2C1_TIMINGR_SCLL` |`129U` | + +## Functions :id=functions + +### `void i2c_init(void)` + +Initialize the I2C driver. This function must be called only once, before any of the below functions can be called. + +This function is weakly defined, meaning it can be overridden if necessary for your particular use case: + +```c +void i2c_init(void) { + setPinInput(B6); // Try releasing special pins for a short time + setPinInput(B7); + wait_ms(10); // Wait for the release to happen + + palSetPadMode(GPIOB, 6, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B6 to I2C function + palSetPadMode(GPIOB, 7, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); // Set B7 to I2C function } ``` + +--- + +### `i2c_status_t i2c_start(uint8_t address, uint16_t timeout)` + +Start an I2C transaction. + +#### Arguments + + - `uint8_t address` + The 7-bit I2C address of the device (ie. without the read/write bit - this will be set automatically). + - `uint16_t timeout` + The time in milliseconds to wait for a response from the target device. + +#### Return Value + +`I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. + +--- + +### `i2c_status_t i2c_transmit(uint8_t address, uint8_t *data, uint16_t length, uint16_t timeout)` + +Send multiple bytes to the selected I2C device. + +#### Arguments + + - `uint8_t address` + The 7-bit I2C address of the device. + - `uint8_t *data` + A pointer to the data to transmit. + - `uint16_t length` + The number of bytes to write. Take care not to overrun the length of `data`. + - `uint16_t timeout` + The time in milliseconds to wait for a response from the target device. + +#### Return Value + +`I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. + +--- + +### `i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)` + +Receive multiple bytes from the selected SPI device. + +#### Arguments + + - `uint8_t address` + The 7-bit I2C address of the device. + - `uint8_t *data` + A pointer to the buffer to read into. + - `uint16_t length` + The number of bytes to read. Take care not to overrun the length of `data`. + - `uint16_t timeout` + The time in milliseconds to wait for a response from the target device. + +#### Return Value + +`I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. + +--- + +### `i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` + +Writes to a register on the I2C device. + +#### Arguments + + - `uint8_t devaddr` + The 7-bit I2C address of the device. + - `uint8_t regaddr` + The register address to write to. + - `uint8_t *data` + A pointer to the data to transmit. + - `uint16_t length` + The number of bytes to write. Take care not to overrun the length of `data`. + - `uint16_t timeout` + The time in milliseconds to wait for a response from the target device. + +#### Return Value + +`I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. + +--- + +### `i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` + +Reads from a register on the I2C device. + +#### Arguments + + - `uint8_t devaddr` + The 7-bit I2C address of the device. + - `uint8_t regaddr` + The register address to read from. + - `uint16_t length` + The number of bytes to read. Take care not to overrun the length of `data`. + - `uint16_t timeout` + The time in milliseconds to wait for a response from the target device. + +#### Return Value + +`I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. + +--- + +### `i2c_status_t i2c_stop(void)` + +Stop the current I2C transaction. diff --git a/docs/spi_driver.md b/docs/spi_driver.md index 1d432432ad1..16fe1d803fd 100644 --- a/docs/spi_driver.md +++ b/docs/spi_driver.md @@ -8,7 +8,7 @@ No special setup is required - just connect the `SS`, `SCK`, `MOSI` and `MISO` p |MCU |`SS`|`SCK`|`MOSI`|`MISO`| |---------------|----|-----|------|------| -|ATMega16/32U2/4|`B0`|`B1` |`B2` |`B3` | +|ATmega16/32U2/4|`B0`|`B1` |`B2` |`B3` | |AT90USB64/128 |`B0`|`B1` |`B2` |`B3` | |ATmega32A |`B4`|`B7` |`B5` |`B6` | |ATmega328/P |`B2`|`B5` |`B3` |`B4` | @@ -20,22 +20,34 @@ You may use more than one slave select pin, not just the `SS` pin. This is usefu You'll need to determine which pins can be used for SPI -- as an example, STM32 parts generally have multiple SPI peripherals, labeled SPI1, SPI2, SPI3 etc. -To enable SPI, modify your board's `halconf.h` to enable SPI - both `HAL_USE_SPI` and `SPI_USE_WAIT` should be `TRUE`, and `SPI_SELECT_MODE` should be `SPI_SELECT_MODE_PAD`. -Then, modify your board's `mcuconf.h` to enable the SPI peripheral you've chosen -- in the case of using SPI2, modify `STM32_SPI_USE_SPI2` to be `TRUE`. +To enable SPI, modify your board's `halconf.h` to enable SPI: -As per the AVR configuration, you may select any other standard GPIO as a slave select pin, and can be supplied to `spi_start()`. +```c +#define HAL_USE_SPI TRUE +#define SPI_USE_WAIT TRUE +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +``` + +Then, modify your board's `mcuconf.h` to enable the peripheral you've chosen, for example: + +```c +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE +``` Configuration-wise, you'll need to set up the peripheral as per your MCU's datasheet -- the defaults match the pins for a Proton-C, i.e. STM32F303. -`config.h` override | Description | Default Value -----------------------------|---------------------------------------------------------------|-------------- -`#define SPI_DRIVER` | SPI peripheral to use - SPI1 => `SPID1`, SPI2 => `SPID2` etc. | `SPID2` -`#define SPI_SCK_PIN` | The pin to use for the SCK | `B13` -`#define SPI_SCK_PAL_MODE` | The alternate function mode for the SCK pin | `5` -`#define SPI_MOSI_PIN` | The pin to use for the MOSI | `B15` -`#define SPI_MOSI_PAL_MODE` | The alternate function mode for the MOSI pin | `5` -`#define SPI_MISO_PIN` | The pin to use for the MISO | `B14` -`#define SPI_MISO_PAL_MODE` | The alternate function mode for the MISO pin | `5` +|`config.h` Override|Description |Default| +|-------------------|-------------------------------------------------------------|-------| +|`SPI_DRIVER` |SPI peripheral to use - SPI1 -> `SPID1`, SPI2 -> `SPID2` etc.|`SPID2`| +|`SPI_SCK_PIN` |The pin to use for SCK |`B13` | +|`SPI_SCK_PAL_MODE` |The alternate function mode for SCK |`5` | +|`SPI_MOSI_PIN` |The pin to use for MOSI |`B15` | +|`SPI_MOSI_PAL_MODE`|The alternate function mode for MOSI |`5` | +|`SPI_MISO_PIN` |The pin to use for MISO |`B14` | +|`SPI_MISO_PAL_MODE`|The alternate function mode for MISO |`5` | + +As per the AVR configuration, you may choose any other standard GPIO as a slave select pin, which should be supplied to `spi_start()`. ## Functions @@ -112,7 +124,7 @@ Send multiple bytes to the selected SPI device. #### Return Value -`SPI_STATUS_TIMEOUT` if the timeout period elapses, `SPI_STATUS_SUCCESS` on success, or `SPI_STATUS_ERROR` otherwise. +`SPI_STATUS_TIMEOUT` if the timeout period elapses, `SPI_STATUS_ERROR` if some other error occurs, otherwise `SPI_STATUS_SUCCESS`. --- @@ -129,7 +141,7 @@ Receive multiple bytes from the selected SPI device. #### Return Value -`SPI_STATUS_TIMEOUT` if the internal transmission timeout period elapses, `SPI_STATUS_SUCCESS` on success, or `SPI_STATUS_ERROR` otherwise. +`SPI_STATUS_TIMEOUT` if the timeout period elapses, `SPI_STATUS_ERROR` if some other error occurs, otherwise `SPI_STATUS_SUCCESS`. --- From fc29c7a589837c2d1e4173d59d2849f89d3cb72b Mon Sep 17 00:00:00 2001 From: Danny Date: Sun, 7 Feb 2021 15:49:16 -0500 Subject: [PATCH 2/2] Add DSP40 (#11579) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/keebio/dsp40/config.h | 19 + keyboards/keebio/dsp40/dsp40.c | 17 + keyboards/keebio/dsp40/dsp40.h | 21 + keyboards/keebio/dsp40/info.json | 107 +++ .../keebio/dsp40/keymaps/bakingpy/config.h | 19 + .../keebio/dsp40/keymaps/bakingpy/keymap.c | 214 ++++++ .../keebio/dsp40/keymaps/default/keymap.c | 116 +++ keyboards/keebio/dsp40/keymaps/via/keymap.c | 75 ++ keyboards/keebio/dsp40/keymaps/via/rules.mk | 5 + keyboards/keebio/dsp40/readme.md | 13 + keyboards/keebio/dsp40/rev1/chconf.h | 714 ++++++++++++++++++ keyboards/keebio/dsp40/rev1/config.h | 65 ++ keyboards/keebio/dsp40/rev1/halconf.h | 525 +++++++++++++ keyboards/keebio/dsp40/rev1/mcuconf.h | 176 +++++ keyboards/keebio/dsp40/rev1/readme.md | 13 + keyboards/keebio/dsp40/rev1/rev1.c | 26 + keyboards/keebio/dsp40/rev1/rev1.h | 47 ++ keyboards/keebio/dsp40/rev1/rules.mk | 20 + keyboards/keebio/dsp40/rules.mk | 1 + 19 files changed, 2193 insertions(+) create mode 100644 keyboards/keebio/dsp40/config.h create mode 100644 keyboards/keebio/dsp40/dsp40.c create mode 100644 keyboards/keebio/dsp40/dsp40.h create mode 100644 keyboards/keebio/dsp40/info.json create mode 100644 keyboards/keebio/dsp40/keymaps/bakingpy/config.h create mode 100644 keyboards/keebio/dsp40/keymaps/bakingpy/keymap.c create mode 100755 keyboards/keebio/dsp40/keymaps/default/keymap.c create mode 100755 keyboards/keebio/dsp40/keymaps/via/keymap.c create mode 100644 keyboards/keebio/dsp40/keymaps/via/rules.mk create mode 100644 keyboards/keebio/dsp40/readme.md create mode 100644 keyboards/keebio/dsp40/rev1/chconf.h create mode 100644 keyboards/keebio/dsp40/rev1/config.h create mode 100644 keyboards/keebio/dsp40/rev1/halconf.h create mode 100644 keyboards/keebio/dsp40/rev1/mcuconf.h create mode 100644 keyboards/keebio/dsp40/rev1/readme.md create mode 100644 keyboards/keebio/dsp40/rev1/rev1.c create mode 100644 keyboards/keebio/dsp40/rev1/rev1.h create mode 100644 keyboards/keebio/dsp40/rev1/rules.mk create mode 100644 keyboards/keebio/dsp40/rules.mk diff --git a/keyboards/keebio/dsp40/config.h b/keyboards/keebio/dsp40/config.h new file mode 100644 index 00000000000..d4a20c4bcf4 --- /dev/null +++ b/keyboards/keebio/dsp40/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" diff --git a/keyboards/keebio/dsp40/dsp40.c b/keyboards/keebio/dsp40/dsp40.c new file mode 100644 index 00000000000..745cd386d45 --- /dev/null +++ b/keyboards/keebio/dsp40/dsp40.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "dsp40.h" diff --git a/keyboards/keebio/dsp40/dsp40.h b/keyboards/keebio/dsp40/dsp40.h new file mode 100644 index 00000000000..ec5e5fbbcb9 --- /dev/null +++ b/keyboards/keebio/dsp40/dsp40.h @@ -0,0 +1,21 @@ +/* Copyright 2021 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#ifdef KEYBOARD_keebio_dsp40_rev1 + #include "rev1.h" +#endif diff --git a/keyboards/keebio/dsp40/info.json b/keyboards/keebio/dsp40/info.json new file mode 100644 index 00000000000..e00f4f21a60 --- /dev/null +++ b/keyboards/keebio/dsp40/info.json @@ -0,0 +1,107 @@ +{ + "keyboard_name": "DSP40", + "url": "https://keeb.io", + "maintainer": "nooges", + "width": 12, + "height": 4, + "layouts": { + "LAYOUT": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "Q", "x": 1, "y": 0 }, + { "label": "W", "x": 2, "y": 0 }, + { "label": "E", "x": 3, "y": 0 }, + { "label": "R", "x": 4, "y": 0 }, + { "label": "T", "x": 5, "y": 0 }, + { "label": "Y", "x": 6, "y": 0 }, + { "label": "U", "x": 7, "y": 0 }, + { "label": "I", "x": 8, "y": 0 }, + { "label": "O", "x": 9, "y": 0 }, + { "label": "P", "x": 10, "y": 0 }, + { "label": "Back
Space", "x": 11, "y": 0 }, + { "label": "Tab", "x": 0, "y": 1, "w": 1.25 }, + { "label": "A", "x": 1.25, "y": 1 }, + { "label": "S", "x": 2.25, "y": 1 }, + { "label": "D", "x": 3.25, "y": 1 }, + { "label": "F", "x": 4.25, "y": 1 }, + { "label": "G", "x": 5.25, "y": 1 }, + { "label": "H", "x": 6.25, "y": 1 }, + { "label": "J", "x": 7.25, "y": 1 }, + { "label": "K", "x": 8.25, "y": 1 }, + { "label": "L", "x": 9.25, "y": 1 }, + { "label": "Enter", "x": 10.25, "y": 1, "w": 1.75 }, + { "label": "Shift", "x": 0, "y": 2, "w": 1.75 }, + { "label": "Z", "x": 1.75, "y": 2 }, + { "label": "X", "x": 2.75, "y": 2 }, + { "label": "C", "x": 3.75, "y": 2 }, + { "label": "V", "x": 4.75, "y": 2 }, + { "label": "B", "x": 5.75, "y": 2 }, + { "label": "N", "x": 6.75, "y": 2 }, + { "label": "M", "x": 7.75, "y": 2 }, + { "label": "<", "x": 8.75, "y": 2 }, + { "label": "Shift", "x": 9.75, "y": 2, "w": 1.25 }, + { "label": "Fn", "x": 11, "y": 2 }, + { "label": "Hyper", "x": 0, "y": 3, "w": 1.25 }, + { "label": "Super", "x": 1.25, "y": 3 }, + { "label": "Meta", "x": 2.25, "y": 3, "w": 1.25 }, + { "x": 3.5, "y": 3, "w": 2.25 }, + { "x": 5.75, "y": 3, "w": 2.75 }, + { "label": "Super", "x": 8.5, "y": 3, "w": 1.25 }, + { "label": "Meta", "x": 9.75, "y": 3 }, + { "label": "Super", "x": 10.75, "y": 3, "w": 1.25 } + ] + }, + "LAYOUT_ortho_4x12": { + "layout": [ + { "label": "Tab", "x": 0, "y": 0 }, + { "label": "Q", "x": 1, "y": 0 }, + { "label": "W", "x": 2, "y": 0 }, + { "label": "E", "x": 3, "y": 0 }, + { "label": "R", "x": 4, "y": 0 }, + { "label": "T", "x": 5, "y": 0 }, + { "label": "Y", "x": 6, "y": 0 }, + { "label": "U", "x": 7, "y": 0 }, + { "label": "I", "x": 8, "y": 0 }, + { "label": "O", "x": 9, "y": 0 }, + { "label": "P", "x": 10, "y": 0 }, + { "label": "Back Space", "x": 11, "y": 0 }, + { "label": "Esc", "x": 0, "y": 1 }, + { "label": "A", "x": 1, "y": 1 }, + { "label": "S", "x": 2, "y": 1 }, + { "label": "D", "x": 3, "y": 1 }, + { "label": "F", "x": 4, "y": 1 }, + { "label": "G", "x": 5, "y": 1 }, + { "label": "H", "x": 6, "y": 1 }, + { "label": "J", "x": 7, "y": 1 }, + { "label": "K", "x": 8, "y": 1 }, + { "label": "L", "x": 9, "y": 1 }, + { "label": ";", "x": 10, "y": 1 }, + { "label": "'", "x": 11, "y": 1 }, + { "label": "Shift", "x": 0, "y": 2 }, + { "label": "Z", "x": 1, "y": 2 }, + { "label": "X", "x": 2, "y": 2 }, + { "label": "C", "x": 3, "y": 2 }, + { "label": "V", "x": 4, "y": 2 }, + { "label": "B", "x": 5, "y": 2 }, + { "label": "N", "x": 6, "y": 2 }, + { "label": "M", "x": 7, "y": 2 }, + { "label": ",", "x": 8, "y": 2 }, + { "label": ".", "x": 9, "y": 2 }, + { "label": "/", "x": 10, "y": 2 }, + { "label": "Enter", "x": 11, "y": 2 }, + { "x": 0, "y": 3 }, + { "label": "Ctrl", "x": 1, "y": 3 }, + { "label": "Alt", "x": 2, "y": 3 }, + { "label": "Super", "x": 3, "y": 3 }, + { "label": "Lower", "x": 4, "y": 3 }, + { "label": "Space", "x": 5, "y": 3 }, + { "label": "Space", "x": 6, "y": 3 }, + { "label": "Raise", "x": 7, "y": 3 }, + { "label": "Left", "x": 8, "y": 3 }, + { "label": "Down", "x": 9, "y": 3 }, + { "label": "Up", "x": 10, "y": 3 }, + { "label": "Right", "x": 11, "y": 3 } + ] + } + } +} diff --git a/keyboards/keebio/dsp40/keymaps/bakingpy/config.h b/keyboards/keebio/dsp40/keymaps/bakingpy/config.h new file mode 100644 index 00000000000..21bdbf97e3b --- /dev/null +++ b/keyboards/keebio/dsp40/keymaps/bakingpy/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define TAPPING_TERM 150 diff --git a/keyboards/keebio/dsp40/keymaps/bakingpy/keymap.c b/keyboards/keebio/dsp40/keymaps/bakingpy/keymap.c new file mode 100644 index 00000000000..7081eedbdda --- /dev/null +++ b/keyboards/keebio/dsp40/keymaps/bakingpy/keymap.c @@ -0,0 +1,214 @@ +/* Copyright 2021 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layer_names { + _MAC, + _WINDOWS, + _TESTMODE, + _LOWER, + _RAISE, + _FKEYS, + _ADJUST, +}; + +enum custom_keycodes { + MAC = SAFE_RANGE, + WINDOWS, + TESTMODE, + LOWER, + RAISE, + ADJUST, +}; + +#define KC_ KC_TRNS + +#define KC_CAPW LGUI(LSFT(KC_3)) // Capture whole screen +#define KC_CPYW LGUI(LSFT(LCTL(KC_3))) // Copy whole screen +#define KC_CAPP LGUI(LSFT(KC_4)) // Capture portion of screen +#define KC_CPYP LGUI(LSFT(LCTL(KC_4))) // Copy portion of screen +#define KC_ESCC MT(MOD_LCTL, KC_ESC) +#define KC_LOWR LOWER +#define KC_RASE RAISE +#define KC_GRVF LT(_FKEYS, KC_GRV) +#define KC_ENTS MT(MOD_LSFT, KC_ENT) +#define KC_BL_S BL_STEP +#define KC_BL_T BL_TOGG +#define KC_RMOD RGB_MOD + +#ifndef LAYOUT_kc_ortho_4x12 +#define LAYOUT_kc_ortho_4x12( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \ + ) \ + LAYOUT_ortho_4x12( \ + KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \ + KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \ + KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \ + KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \ + ) + +#endif + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_MAC] = LAYOUT_kc_ortho_4x12( + //┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS, + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + ESCC, A , S , D , F , G , H , J , K , L ,SCLN,QUOT, + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,ENTS, + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + GRVF,LCTL,LALT,LGUI,LOWR,SPC , BSPC,RASE,LEFT,DOWN, UP ,RGHT + //└────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ + ), + + [_WINDOWS] = LAYOUT_kc_ortho_4x12( + //┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS, + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + ESCC, A , S , D , F , G , H , J , K , L ,SCLN,QUOT, + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,ENTS, + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + GRVF,LALT,LGUI,LCTL,LOWR,SPC , BSPC,RASE,LEFT,DOWN, UP ,RGHT + //└────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ + ), + + [_TESTMODE] = LAYOUT_kc_ortho_4x12( + //┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + TAB , Q , W , E , R , T , Y , U , I , O , P ,MINS, + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + RMOD,BL_S, S , D , F , G , RMOD,BL_S, K , L ,SCLN,QUOT, + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,ENTS, + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + GRVF,LALT,LGUI,LCTL,LOWR,SPC , BSPC,RASE,LEFT,DOWN, UP ,RGHT + //└────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ + ), + + [_LOWER] = LAYOUT_kc_ortho_4x12( + //┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 , , + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + DEL ,CAPP,LEFT,RGHT, UP ,LBRC, RBRC, P4 , P5 , P6 ,PLUS,PIPE, + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + ,CPYP, , ,DOWN,LCBR, RCBR, P1 , P2 , P3 ,MINS, , + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + BL_S,BL_T, , , ,DEL , DEL , , P0 ,PDOT, , + //└────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ + ), + + [_RAISE] = LAYOUT_kc_ortho_4x12( + //┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + ,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN, , + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + DEL ,MPRV,MNXT,VOLU,PGUP,UNDS, EQL ,HOME, , , ,BSLS, + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + MUTE,MSTP,MPLY,VOLD,PGDN,MINS, PLUS,END , , , , , + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + , , , , , , , , , , , + //└────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ + ), + + [_FKEYS] = LAYOUT_kc_ortho_4x12( + //┌────┬────┬────┬────┬────┬────┐ ┌────┬────┬────┬────┬────┬────┐ + F12 , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 , + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + , , , , , , , , , , , , + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + , , , , , , , , , , , , + //├────┼────┼────┼────┼────┼────┤ ├────┼────┼────┼────┼────┼────┤ + , , , , , , , , , , , + //└────┴────┴────┴────┴────┴────┘ └────┴────┴────┴────┴────┴────┘ + ), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset|RGB Tg|RGB Md|Hue Up|Hue Dn|Sat Up|Sat Dn|Val Up|Val Dn| | | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ + [_ADJUST] = LAYOUT_ortho_4x12( + _______, RESET , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, MAC, WINDOWS, TESTMODE,_______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) + + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case MAC: + if (record->event.pressed) { + set_single_persistent_default_layer(_MAC); + } + return false; + break; + case WINDOWS: + if (record->event.pressed) { + set_single_persistent_default_layer(_WINDOWS); + } + return false; + break; + case TESTMODE: + if (record->event.pressed) { + set_single_persistent_default_layer(_TESTMODE); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} diff --git a/keyboards/keebio/dsp40/keymaps/default/keymap.c b/keyboards/keebio/dsp40/keymaps/default/keymap.c new file mode 100755 index 00000000000..e4162d3b48a --- /dev/null +++ b/keyboards/keebio/dsp40/keymaps/default/keymap.c @@ -0,0 +1,116 @@ +/* Copyright 2021 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum custom_layer { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST, +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Default Layer + * ,-----------------------------------------------------------. + * | Esc| Q | W | E | R | T | Y | U | I | O | P | BS | + * |-----------------------------------------------------------| + * | Tab | A | S | D | F | G | H | J | K | L | Ent | + * |-----------------------------------------------------------| + * | LSft | Z | X | C | V | B | N | M | , | . | /? | + * |-----------------------------------------------------------| + * | LCtl | LGui| LAlt| spc fn0 | spc fn1 |fn2|RAlt|RCtl | + * `-----------------------------------------------------------' + */ + [_QWERTY] = LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, LT(_LOWER, KC_SPC), LT(_RAISE, KC_SPC), LT(_ADJUST, KC_LGUI), KC_RALT, KC_RCTL + ), + + [_LOWER] = LAYOUT( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),BL_TOGG, BL_INC, BL_DEC, + _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + + [_RAISE] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, KC_DEL, + _______, KC_TRNS, _______, KC_TRNS, KC_TRNS, _______, _______, RGB_TOG + ), + + [_ADJUST] = LAYOUT( + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } +} diff --git a/keyboards/keebio/dsp40/keymaps/via/keymap.c b/keyboards/keebio/dsp40/keymaps/via/keymap.c new file mode 100755 index 00000000000..dfa7a18323e --- /dev/null +++ b/keyboards/keebio/dsp40/keymaps/via/keymap.c @@ -0,0 +1,75 @@ +/* Copyright 2021 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum via_layers { + _MAIN, + _FN1, + _FN2, + _FN3, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Default Layer + * ,-----------------------------------------------------------. + * | Esc| Q | W | E | R | T | Y | U | I | O | P | BS | + * |-----------------------------------------------------------| + * | Tab | A | S | D | F | G | H | J | K | L | Ent | + * |-----------------------------------------------------------| + * | LSft | Z | X | C | V | B | N | M | , | . | /? | + * |-----------------------------------------------------------| + * | LCtl | LGui| LAlt| spc fn1 | spc fn2 |fn3|RAlt|RCtl | + * `-----------------------------------------------------------' + */ + [_MAIN] = LAYOUT_ortho_4x12( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, LT(_FN1, KC_SPC), KC_SPC, KC_SPC, LT(_FN2, KC_SPC), MO(_FN3), LT(_FN3, KC_LGUI), KC_RALT, KC_RCTL + ), + + [_FN1] = LAYOUT_ortho_4x12( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),BL_TOGG,BL_INC, BL_DEC, + _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + + [_FN2] = LAYOUT_ortho_4x12( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, KC_BSLS, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, KC_DEL, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_FN3] = LAYOUT_ortho_4x12( + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + +void encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } +} diff --git a/keyboards/keebio/dsp40/keymaps/via/rules.mk b/keyboards/keebio/dsp40/keymaps/via/rules.mk new file mode 100644 index 00000000000..d96967a6085 --- /dev/null +++ b/keyboards/keebio/dsp40/keymaps/via/rules.mk @@ -0,0 +1,5 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes +MOUSEKEY_ENABLE = yes +CONSOLE_ENABLE = yes +COMMAND_ENABLE = no diff --git a/keyboards/keebio/dsp40/readme.md b/keyboards/keebio/dsp40/readme.md new file mode 100644 index 00000000000..c6b195c4040 --- /dev/null +++ b/keyboards/keebio/dsp40/readme.md @@ -0,0 +1,13 @@ +# DSP40 + +A 40% keyboard with ortho and staggered layout options. + +* Keyboard Maintainer: [Bakingpy/nooges](https://github.com/nooges) +* Hardware Supported: STM32F072CBT6 +* Hardware Availability: [Keebio](https://keeb.io/) + +Make example for this keyboard (after setting up your build environment): + + make keebio/dsp40/rev1:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/keebio/dsp40/rev1/chconf.h b/keyboards/keebio/dsp40/rev1/chconf.h new file mode 100644 index 00000000000..03f63da36a8 --- /dev/null +++ b/keyboards/keebio/dsp40/rev1/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM FALSE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP FALSE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS FALSE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS FALSE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES FALSE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY FALSE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES FALSE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES FALSE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS FALSE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/keebio/dsp40/rev1/config.h b/keyboards/keebio/dsp40/rev1/config.h new file mode 100644 index 00000000000..753af5ce2f8 --- /dev/null +++ b/keyboards/keebio/dsp40/rev1/config.h @@ -0,0 +1,65 @@ +/* Copyright 2021 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xCB10 +#define PRODUCT_ID 0x144C +#define DEVICE_VER 0x0100 +#define MANUFACTURER Keebio +#define PRODUCT DSP40 Rev. 1 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* Keyboard Matrix Assignments */ +#define MATRIX_ROW_PINS { B9, A9, A8, B15 } +#define MATRIX_COL_PINS { B10, B2, A3, A4, B7, B6, A10, C13, C14, C15, F0, F1 } +#define ENCODERS_PAD_A { A1 } +#define ENCODERS_PAD_B { A2 } +#define TAP_CODE_DELAY 10 +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN A6 +#define BACKLIGHT_PWM_DRIVER PWMD3 +#define BACKLIGHT_PWM_CHANNEL 1 +#define BACKLIGHT_PAL_MODE 1 +// #define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 7 + +#define RGB_DI_PIN D3 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 4 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ + /*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/keebio/dsp40/rev1/halconf.h b/keyboards/keebio/dsp40/rev1/halconf.h new file mode 100644 index 00000000000..ff5ae7e8a5f --- /dev/null +++ b/keyboards/keebio/dsp40/rev1/halconf.h @@ -0,0 +1,525 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/keebio/dsp40/rev1/mcuconf.h b/keyboards/keebio/dsp40/rev1/mcuconf.h new file mode 100644 index 00000000000..0e49478c8b0 --- /dev/null +++ b/keyboards/keebio/dsp40/rev1/mcuconf.h @@ -0,0 +1,176 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF +// #define STM32F070xB + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_HSI48_ENABLED FALSE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_USBSW STM32_USBSW_HSI48 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 +#define STM32_GPT_TIM14_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 3 +#define STM32_I2C_I2C2_IRQ_PRIORITY 3 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 + +#endif /* _MCUCONF_H_ */ diff --git a/keyboards/keebio/dsp40/rev1/readme.md b/keyboards/keebio/dsp40/rev1/readme.md new file mode 100644 index 00000000000..ee62ba78869 --- /dev/null +++ b/keyboards/keebio/dsp40/rev1/readme.md @@ -0,0 +1,13 @@ +# DSP40 Rev. 1 + +A 40% keyboard with ortho and staggered layout options. + +* Keyboard Maintainer: [Bakingpy/nooges](https://github.com/nooges) +* Hardware Supported: STM32F072CBT6 +* Hardware Availability: [Keebio](https://keeb.io/) + +Make example for this keyboard (after setting up your build environment): + + make keebio/dsp40/rev1:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/keebio/dsp40/rev1/rev1.c b/keyboards/keebio/dsp40/rev1/rev1.c new file mode 100644 index 00000000000..04c85b08d18 --- /dev/null +++ b/keyboards/keebio/dsp40/rev1/rev1.c @@ -0,0 +1,26 @@ +/* Copyright 2021 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "rev1.h" + +void eeconfig_init_kb(void) { +#ifdef BACKLIGHT_ENABLE + backlight_enable(); + backlight_level(5); +#endif + eeconfig_update_kb(0); + eeconfig_init_user(); +} diff --git a/keyboards/keebio/dsp40/rev1/rev1.h b/keyboards/keebio/dsp40/rev1/rev1.h new file mode 100644 index 00000000000..f03792175e6 --- /dev/null +++ b/keyboards/keebio/dsp40/rev1/rev1.h @@ -0,0 +1,47 @@ +/* Copyright 2021 Danny Nguyen + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "dsp40.h" +#include "quantum.h" + +#define LAYOUT_ortho_4x12( \ + KA1, KA2, KA3, KA4, KA5, KA6, KA7, KA8, KA9, KA10, KA11, KA12, \ + KB1, KB2, KB3, KB4, KB5, KB6, KB7, KB8, KB9, KB10, KB11, KB12, \ + KC1, KC2, KC3, KC4, KC5, KC6, KC7, KC8, KC9, KC10, KC11, KC12, \ + KD1, KD2, KD3, KD4, KD5, KD6, KD7, KD8, KD9, KD10, KD11, KD12 \ +) \ +{ \ + { KA1, KA2, KA3, KA4, KA5, KA6, KA7, KA8, KA9, KA10, KA11, KA12 }, \ + { KB1, KB2, KB3, KB4, KB5, KB6, KB7, KB8, KB9, KB10, KB11, KB12 }, \ + { KC1, KC2, KC3, KC4, KC5, KC6, KC7, KC8, KC9, KC10, KC11, KC12 }, \ + { KD1, KD2, KD3, KD4, KD5, KD6, KD7, KD8, KD9, KD10, KD11, KD12 } \ +} + +#define LAYOUT( \ + KA1, KA2, KA3, KA4, KA5, KA6, KA7, KA8, KA9, KA10, KA11, KA12, \ + KB1, KB2, KB3, KB4, KB5, KB6, KB7, KB8, KB9, KB10, KB12, \ + KC2, KC3, KC4, KC5, KC6, KC7, KC8, KC9, KC10, KC11, KC12, \ + KD1, KD2, KD3, KD5, KD8, KD10, KD11, KD12 \ +) \ +{ \ + { KA1, KA2, KA3, KA4, KA5, KA6, KA7, KA8, KA9, KA10, KA11, KA12 }, \ + { KB1, KB2, KB3, KB4, KB5, KB6, KB7, KB8, KB9, KB10, KC_NO, KB12 }, \ + { KC_NO, KC2, KC3, KC4, KC5, KC6, KC7, KC8, KC9, KC10, KC11, KC12 }, \ + { KD1, KD2, KD3, KC_NO, KD5, KC_NO, KC_NO, KD8, KC_NO, KD10, KD11, KD12 } \ +} + +#define LAYOUT_40_staggered LAYOUT diff --git a/keyboards/keebio/dsp40/rev1/rules.mk b/keyboards/keebio/dsp40/rev1/rules.mk new file mode 100644 index 00000000000..5f781fb5d07 --- /dev/null +++ b/keyboards/keebio/dsp40/rev1/rules.mk @@ -0,0 +1,20 @@ +# MCU name +MCU = STM32F072 + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes diff --git a/keyboards/keebio/dsp40/rules.mk b/keyboards/keebio/dsp40/rules.mk new file mode 100644 index 00000000000..3e8e9be18c3 --- /dev/null +++ b/keyboards/keebio/dsp40/rules.mk @@ -0,0 +1 @@ +DEFAULT_FOLDER = keebio/dsp40/rev1