diff --git a/keyboards/mlego/m48/config.h b/keyboards/mlego/m48/config.h index d1c4da93972..879108d2387 100644 --- a/keyboards/mlego/m48/config.h +++ b/keyboards/mlego/m48/config.h @@ -27,6 +27,9 @@ #define DEBOUNCE 5 +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ diff --git a/keyboards/mlego/m48/keymaps/via/keymap.c b/keyboards/mlego/m48/keymaps/via/keymap.c index 4e19343847a..5eb40a332ab 100644 --- a/keyboards/mlego/m48/keymaps/via/keymap.c +++ b/keyboards/mlego/m48/keymaps/via/keymap.c @@ -39,32 +39,77 @@ const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST(m // clang-format off const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ [_QW] = LAYOUT_ortho_4x12( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + KC_TRNS,KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT ), +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ [_LWR] = LAYOUT_ortho_4x12( - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, - KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY ), +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ [_RSE] = LAYOUT_ortho_4x12( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY ), +/* Adjust (Lower + Raise) + * v------------------------RGB CONTROL--------------------v + * ,-----------------------------------------------------------------------------------. + * | | Reset|Debug | RGB |RGBMOD| HUE+ | HUE- | SAT+ | SAT- |BRGTH+|BRGTH-| Del | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | |MUSmod|Aud on|Audoff|AGnorm|AGswap| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|TermOn|TermOf| | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ [_ADJ] = LAYOUT_ortho_4x12( - _______, QK_BOOT, _______, _______, _______, _______, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_M_G, QK_BOOT, _______, - _______, _______, _______, _______, _______, _______, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, - _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, QK_BOOT, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; diff --git a/keyboards/mlego/m48/m48.c b/keyboards/mlego/m48/m48.c index 79ba408cd90..887521075bc 100644 --- a/keyboards/mlego/m48/m48.c +++ b/keyboards/mlego/m48/m48.c @@ -15,16 +15,3 @@ */ #include "m48.h" -/* -void keyboard_pre_init_kb(void){ - - // Workaround for reversible pcb/mcu - palSetLineMode(C13, PAL_MODE_INPUT_PULLUP); - palSetLineMode(C15, PAL_MODE_INPUT_PULLUP); - palSetLineMode(B7, PAL_MODE_OUTPUT_OPENDRAIN); - palSetLineMode(A0, PAL_MODE_OUTPUT_OPENDRAIN); - palSetLineMode(A1, PAL_MODE_OUTPUT_OPENDRAIN); - - keyboard_pre_init_user(); - } -*/ diff --git a/keyboards/mlego/m48/rev1/config.h b/keyboards/mlego/m48/rev1/config.h index 85da34f17a7..dcca34c95e4 100644 --- a/keyboards/mlego/m48/rev1/config.h +++ b/keyboards/mlego/m48/rev1/config.h @@ -18,7 +18,7 @@ #include "config_common.h" /* USB Device descriptor parameter */ -#define PRODUCT_ID 0x0001 +#define PRODUCT_ID 0x6261 #define DEVICE_VER 0x0001 #define MATRIX_ROW_PINS \ @@ -26,24 +26,21 @@ #define MATRIX_COL_PINS \ { A10, A15, B3, B4, B5, B7, B6, A1, A2, A3, A4, A5 } +#ifdef ENCODER_ENABLE #define ENCODERS_PAD_A \ { A0 } #define ENCODERS_PAD_B \ { B8 } +#define ENCODER_RESOLUTION 4 +#endif #define LED_NUM_LOCK_PIN B12 #define LED_SCROLL_LOCK_PIN B13 #define LED_CAPS_LOCK_PIN C13 -#define RGB_DI_PIN B15 - -#define UNUSED_PINS +#ifdef RGBLIGHT_ENABLE #define RGBLIGHT_LAYERS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -#define MATRIX_IO_DELAY 5 +#define RGB_DI_PIN B15 #define RGBLED_NUM 20 #define RGBLIGHT_EFFECT_BREATHING @@ -56,3 +53,9 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE + +#endif + +#define UNUSED_PINS +// you want to comment this if using stm32-dfu as bootloader +#define FEE_PAGE_BASE_ADDRESS 0x08008000 diff --git a/keyboards/mlego/m48/rev1/ld/STM32F401xE.ld b/keyboards/mlego/m48/rev1/ld/STM32F401xE.ld new file mode 100644 index 00000000000..daec7d85834 --- /dev/null +++ b/keyboards/mlego/m48/rev1/ld/STM32F401xE.ld @@ -0,0 +1,88 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F401xE memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */ + flash1 (rx) : org = 0x08004000, len = 16k + flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */ + flash3 (rx) : org = 0x0800C000, len = 16k + flash4 (rx) : org = 0x08010000, len = 512k - 64k + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 96k + ram1 (wx) : org = 0x00000000, len = 0 + ram2 (wx) : org = 0x00000000, len = 0 + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x00000000, len = 0 + ram5 (wx) : org = 0x00000000, len = 0 + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash4); +REGION_ALIAS("VECTORS_FLASH_LMA", flash4); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash4); +REGION_ALIAS("XTORS_FLASH_LMA", flash4); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash4); +REGION_ALIAS("TEXT_FLASH_LMA", flash4); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash4); +REGION_ALIAS("RODATA_FLASH_LMA", flash4); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash4); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash4); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash4); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld + +/* TinyUF2 bootloader reset support */ +_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */ diff --git a/keyboards/mlego/m48/rev1/rules.mk b/keyboards/mlego/m48/rev1/rules.mk index 066cfd4f8e7..da2734ff63c 100644 --- a/keyboards/mlego/m48/rev1/rules.mk +++ b/keyboards/mlego/m48/rev1/rules.mk @@ -2,7 +2,10 @@ MCU = STM32F401 # Bootloader selection -BOOTLOADER = stm32-dfu +BOOTLOADER = tinyuf2 +MCU_LDSCRIPT = STM32F401xE +EEPROM_DRIVER = vendor +#BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable diff --git a/keyboards/mlego/m60/config.h b/keyboards/mlego/m60/config.h index 18c36671a98..abce0cb5f86 100644 --- a/keyboards/mlego/m60/config.h +++ b/keyboards/mlego/m60/config.h @@ -25,6 +25,9 @@ #define MATRIX_ROWS 5 #define MATRIX_COLS 12 +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + #define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ diff --git a/keyboards/mlego/m60/keymaps/default/keymap.c b/keyboards/mlego/m60/keymaps/default/keymap.c index 8d0cddae80f..dbfcad31525 100644 --- a/keyboards/mlego/m60/keymaps/default/keymap.c +++ b/keyboards/mlego/m60/keymaps/default/keymap.c @@ -64,7 +64,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [_ADJ] = LAYOUT_ortho_5x12( - _______, QK_BOOT, _______, _______, _______, _______, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_M_G, QK_BOOT, _______, + _______, QK_BOOT, _______, _______, _______, _______, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_M_G, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, diff --git a/keyboards/mlego/m60/m60.c b/keyboards/mlego/m60/m60.c index cce37837c62..e5dba32cdf4 100644 --- a/keyboards/mlego/m60/m60.c +++ b/keyboards/mlego/m60/m60.c @@ -15,16 +15,3 @@ */ #include "m60.h" -/* -void keyboard_pre_init_kb(void){ - - // Workaround for reversible pcb/mcu - palSetLineMode(C13, PAL_MODE_INPUT_PULLUP); - palSetLineMode(C15, PAL_MODE_INPUT_PULLUP); - palSetLineMode(B7, PAL_MODE_OUTPUT_OPENDRAIN); - palSetLineMode(A0, PAL_MODE_OUTPUT_OPENDRAIN); - palSetLineMode(A1, PAL_MODE_OUTPUT_OPENDRAIN); - - keyboard_pre_init_user(); - } -*/ diff --git a/keyboards/mlego/m60/m60.h b/keyboards/mlego/m60/m60.h index 732b8d2e41a..70cdbef69a0 100644 --- a/keyboards/mlego/m60/m60.h +++ b/keyboards/mlego/m60/m60.h @@ -46,12 +46,7 @@ static inline void led_rse(const bool on) { } static inline void led_caps(const bool on) { #ifdef LED_CAPS_LOCK_PIN - if ((DEVICE_VER == 0x0001) || (DEVICE_VER == 0x0003)) { writePin(LED_CAPS_LOCK_PIN, !on); - } - if (DEVICE_VER == 0x0002) { - writePin(LED_CAPS_LOCK_PIN, on); - } #endif } diff --git a/keyboards/mlego/m60/rev1/config.h b/keyboards/mlego/m60/rev1/config.h index c05f30813a9..437e6051491 100644 --- a/keyboards/mlego/m60/rev1/config.h +++ b/keyboards/mlego/m60/rev1/config.h @@ -18,9 +18,14 @@ #include "config_common.h" /* USB Device descriptor parameter */ -#define PRODUCT_ID 0x0001 +#define PRODUCT_ID 0x6161 #define DEVICE_VER 0x0001 +#define LED_NUM_LOCK_PIN B12 +#define LED_SCROLL_LOCK_PIN B13 +#define LED_CAPS_LOCK_PIN C13 + +#ifdef ENCODER_ENABLE #define MATRIX_ROW_PINS \ { A6, A7, B0, B1, B10 } #define MATRIX_COL_PINS \ @@ -31,20 +36,13 @@ #define ENCODERS_PAD_B \ { B8 } -#define LED_NUM_LOCK_PIN B12 -#define LED_SCROLL_LOCK_PIN B13 -#define LED_CAPS_LOCK_PIN C13 +#endif + +#ifdef RGBLIGHT_ENABLE #define RGB_DI_PIN B15 - -#define UNUSED_PINS #define RGBLIGHT_LAYERS -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -#define MATRIX_IO_DELAY 5 - #define RGBLED_NUM 20 #define RGBLIGHT_EFFECT_BREATHING #define RGBLIGHT_EFFECT_RAINBOW_MOOD @@ -56,3 +54,8 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE +#endif + +#define UNUSED_PINS +// you want to comment this if using stm32-dfu as bootloader +#define FEE_PAGE_BASE_ADDRESS 0x08008000 diff --git a/keyboards/mlego/m60/rev1/ld/STM32F401xE.ld b/keyboards/mlego/m60/rev1/ld/STM32F401xE.ld new file mode 100644 index 00000000000..daec7d85834 --- /dev/null +++ b/keyboards/mlego/m60/rev1/ld/STM32F401xE.ld @@ -0,0 +1,88 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F401xE memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */ + flash1 (rx) : org = 0x08004000, len = 16k + flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */ + flash3 (rx) : org = 0x0800C000, len = 16k + flash4 (rx) : org = 0x08010000, len = 512k - 64k + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 96k + ram1 (wx) : org = 0x00000000, len = 0 + ram2 (wx) : org = 0x00000000, len = 0 + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x00000000, len = 0 + ram5 (wx) : org = 0x00000000, len = 0 + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash4); +REGION_ALIAS("VECTORS_FLASH_LMA", flash4); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash4); +REGION_ALIAS("XTORS_FLASH_LMA", flash4); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash4); +REGION_ALIAS("TEXT_FLASH_LMA", flash4); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash4); +REGION_ALIAS("RODATA_FLASH_LMA", flash4); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash4); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash4); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash4); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld + +/* TinyUF2 bootloader reset support */ +_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */ diff --git a/keyboards/mlego/m60/rev1/rules.mk b/keyboards/mlego/m60/rev1/rules.mk index a3ccf0102de..6b119a1f377 100644 --- a/keyboards/mlego/m60/rev1/rules.mk +++ b/keyboards/mlego/m60/rev1/rules.mk @@ -2,7 +2,10 @@ MCU = STM32F401 # Bootloader selection -BOOTLOADER = stm32-dfu +BOOTLOADER = tinyuf2 +#BOOTLOADER = stm32-dfu +MCU_LDSCRIPT = STM32F401xE +EEPROM_DRIVER = vendor # Build Options # change yes to no to disable diff --git a/keyboards/mlego/m60_split/config.h b/keyboards/mlego/m60_split/config.h index 7c19f9171d7..7282886b0ba 100644 --- a/keyboards/mlego/m60_split/config.h +++ b/keyboards/mlego/m60_split/config.h @@ -26,6 +26,8 @@ #define MATRIX_COLS 6 #define DEBOUNCE 5 +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/mlego/m60_split/keymaps/via/keymap.c b/keyboards/mlego/m60_split/keymaps/via/keymap.c index dc0263c287f..756639bfd9c 100644 --- a/keyboards/mlego/m60_split/keymaps/via/keymap.c +++ b/keyboards/mlego/m60_split/keymaps/via/keymap.c @@ -64,7 +64,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [_ADJ] = LAYOUT_ortho_5x12( - _______, QK_BOOT, _______, _______, _______, _______, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_M_G, QK_BOOT, _______, + _______, QK_BOOT, _______, _______, _______, _______, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_M_G, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, diff --git a/keyboards/mlego/m60_split/rev1/config.h b/keyboards/mlego/m60_split/rev1/config.h index 6b7923ac120..0bbb56aee09 100644 --- a/keyboards/mlego/m60_split/rev1/config.h +++ b/keyboards/mlego/m60_split/rev1/config.h @@ -18,7 +18,7 @@ #include "config_common.h" /* USB Device descriptor parameter */ -#define PRODUCT_ID 0x0001 +#define PRODUCT_ID 0x6361 #define DEVICE_VER 0x0001 #define MATRIX_ROW_PINS \ @@ -32,12 +32,14 @@ #define MATRIX_COL_PINS_RIGHT \ { B0, A3, A2, A1, B7, B5 } // cols are from right to left to match the layout +#ifdef ENCODER_ENABLE #define ENCODERS_PAD_A \ { A0 } #define ENCODERS_PAD_B \ { B8 } #define ENCODER_RESOLUTIONS \ { 4 } +#endif #define LED_NUM_LOCK_PIN B12 #define LED_SCROLL_LOCK_PIN B13 @@ -46,20 +48,15 @@ #define SPLIT_LAYER_STATE_ENABLE #define SPLIT_LED_STATE_ENABLE -#define RGB_DI_PIN B15 #define SPLIT_HAND_PIN B9 #define SERIAL_USART_TX_PIN B6 -#define RGBLIGHT_SPLIT -#define RGBLIGHT_LAYERS - -#define UNUSED_PINS #define SERIAL_USART_SPEED 921600 -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -#define MATRIX_IO_DELAY 5 +#ifdef RGBLIGHT_ENABLE +#define RGB_DI_PIN B15 +#define RGBLIGHT_SPLIT +#define RGBLIGHT_LAYERS #define RGBLIGHT_LIMIT_VAL 128 #define RGBLIGHT_DEFAULT_HUE 213 @@ -84,3 +81,8 @@ #define BOOTMAGIC_LITE_COLUMN 0 #define BOOTMAGIC_LITE_ROW_RIGHT 5 #define BOOTMAGIC_LITE_COLUMN_RIGHT 0 +#endif + +#define UNUSED_PINS +// you want to comment this if using stm32-dfu as bootloader +#define FEE_PAGE_BASE_ADDRESS 0x08008000 diff --git a/keyboards/mlego/m60_split/rev1/ld/STM32F401xE.ld b/keyboards/mlego/m60_split/rev1/ld/STM32F401xE.ld new file mode 100644 index 00000000000..daec7d85834 --- /dev/null +++ b/keyboards/mlego/m60_split/rev1/ld/STM32F401xE.ld @@ -0,0 +1,88 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F401xE memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */ + flash1 (rx) : org = 0x08004000, len = 16k + flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */ + flash3 (rx) : org = 0x0800C000, len = 16k + flash4 (rx) : org = 0x08010000, len = 512k - 64k + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 96k + ram1 (wx) : org = 0x00000000, len = 0 + ram2 (wx) : org = 0x00000000, len = 0 + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x00000000, len = 0 + ram5 (wx) : org = 0x00000000, len = 0 + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash4); +REGION_ALIAS("VECTORS_FLASH_LMA", flash4); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash4); +REGION_ALIAS("XTORS_FLASH_LMA", flash4); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash4); +REGION_ALIAS("TEXT_FLASH_LMA", flash4); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash4); +REGION_ALIAS("RODATA_FLASH_LMA", flash4); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash4); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash4); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash4); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld + +/* TinyUF2 bootloader reset support */ +_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */ diff --git a/keyboards/mlego/m60_split/rev1/rules.mk b/keyboards/mlego/m60_split/rev1/rules.mk index 9e2c8d6570a..14022f20865 100644 --- a/keyboards/mlego/m60_split/rev1/rules.mk +++ b/keyboards/mlego/m60_split/rev1/rules.mk @@ -2,7 +2,10 @@ MCU = STM32F401 # Bootloader selection -BOOTLOADER = stm32-dfu +BOOTLOADER = tinyuf2 +#BOOTLOADER = stm32-dfu +MCU_LDSCRIPT = STM32F401xE +EEPROM_DRIVER = vendor # Build Options # change yes to no to disable diff --git a/keyboards/mlego/m60_split/rev2/config.h b/keyboards/mlego/m60_split/rev2/config.h index 1e45e86d06b..c5b011c4379 100644 --- a/keyboards/mlego/m60_split/rev2/config.h +++ b/keyboards/mlego/m60_split/rev2/config.h @@ -18,7 +18,7 @@ #include "config_common.h" /* USB Device descriptor parameter */ -#define PRODUCT_ID 0x0001 +#define PRODUCT_ID 0x6362 #define DEVICE_VER 0x0001 #define MATRIX_ROW_PINS \ @@ -32,6 +32,8 @@ #define MATRIX_COL_PINS_RIGHT \ { B0, A3, A2, A1, B7, B5 } // cols are from right to left to match the layout + +#ifdef ENCODER_ENABLE #define ENCODERS_PAD_A \ { A0 } #define ENCODERS_PAD_B \ @@ -39,28 +41,25 @@ #define ENCODER_RESOLUTIONS \ { 4 } +#endif + #define LED_NUM_LOCK_PIN B12 #define LED_SCROLL_LOCK_PIN B13 #define LED_CAPS_LOCK_PIN C13 #define SPLIT_LAYER_STATE_ENABLE #define SPLIT_LED_STATE_ENABLE -#define RGB_DI_PIN B15 #define SPLIT_HAND_PIN B9 #define SERIAL_USART_TX_PIN B6 -#define RGBLIGHT_SPLIT -#define UNUSED_PINS #define SERIAL_USART_SPEED 921600 -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -#define MATRIX_IO_DELAY 5 +#ifdef RGBLIGHT_ENABLE +#define RGB_DI_PIN B15 +#define RGBLIGHT_SPLIT #define RGBLIGHT_LAYERS - #define RGBLED_NUM 16 #define RGBLED_SPLIT \ { 8, 8 } @@ -74,9 +73,12 @@ #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #define RGBLIGHT_EFFECT_TWINKLE +#endif /* Bootmagic Lite key configuration */ #define BOOTMAGIC_LITE_ROW 0 #define BOOTMAGIC_LITE_COLUMN 0 #define BOOTMAGIC_LITE_ROW_RIGHT 5 #define BOOTMAGIC_LITE_COLUMN_RIGHT 0 + +#define UNUSED_PINS diff --git a/keyboards/mlego/m65/keymaps/default/keymap.c b/keyboards/mlego/m65/keymaps/default/keymap.c index c8a6cfce2e1..4b4b23ca6ef 100644 --- a/keyboards/mlego/m65/keymaps/default/keymap.c +++ b/keyboards/mlego/m65/keymaps/default/keymap.c @@ -17,23 +17,6 @@ along with this program. If not, see . #include QMK_KEYBOARD_H -enum layer_names { - _QW = 0, - _LWR, - _RSE, - _ADJ -}; - -#ifdef RGBLIGHT_ENABLE - -const rgblight_segment_t PROGMEM my_qwerty_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_PURPLE}); -const rgblight_segment_t PROGMEM my_lwr_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_CYAN}); -const rgblight_segment_t PROGMEM my_rse_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_RED}); -const rgblight_segment_t PROGMEM my_adj_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_GREEN}); - -const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST(my_qwerty_layer, my_lwr_layer, my_rse_layer, my_adj_layer); -#endif - // clang-format off const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -68,24 +51,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; // clang-format on -// let us assume we start with both layers off -static bool toggle_lwr = false; -static bool toggle_rse = false; - bool led_update_user(led_t led_state) { // Disable the default LED update code, so that lock LEDs could be reused to show layer status. return false; } void matrix_scan_user(void) { - led_lwr(toggle_lwr); - led_rse(toggle_rse); - led_t led_state = host_keyboard_led_state(); - led_caps(led_state.caps_lock); - if (layer_state_is(_ADJ)) { - led_lwr(true); - led_rse(true); - } + + toggle_leds(); + } bool process_record_user(uint16_t keycode, keyrecord_t* record) { @@ -93,13 +67,13 @@ bool process_record_user(uint16_t keycode, keyrecord_t* record) { case (TT(_LWR)): if (!record->event.pressed && record->tap.count == TAPPING_TOGGLE) { // This runs before the TT() handler toggles the layer state, so the current layer state is the opposite of the final one after toggle. - toggle_lwr = !layer_state_is(_LWR); + set_led_toggle(_LWR, !layer_state_is(_LWR)); } return true; break; case (TT(_RSE)): if (record->event.pressed && record->tap.count == TAPPING_TOGGLE) { - toggle_rse = !layer_state_is(_RSE); + set_led_toggle(_RSE, !layer_state_is(_RSE)); } return true; break; @@ -109,61 +83,37 @@ bool process_record_user(uint16_t keycode, keyrecord_t* record) { } layer_state_t layer_state_set_user(layer_state_t state) { + #ifdef RGBLIGHT_ENABLE - rgblight_set_layer_state(0, layer_state_cmp(state, _QW)); - rgblight_set_layer_state(1, layer_state_cmp(state, _LWR)); - rgblight_set_layer_state(2, layer_state_cmp(state, _RSE)); - rgblight_set_layer_state(3, layer_state_cmp(state, _ADJ)); + set_rgb_layers(state); #endif + return update_tri_layer_state(state, _LWR, _RSE, _ADJ); } #ifdef RGBLIGHT_ENABLE layer_state_t default_layer_state_set_user(layer_state_t state) { - rgblight_set_layer_state(0, layer_state_cmp(state, _QW)); + set_default_rgb_layers(state); return state; } +#endif + void keyboard_post_init_user(void) { + +#ifdef RGBLIGHT_ENABLE + // Enable the LED layers - rgblight_layers = my_rgb_layers; -} + rgblight_layers = my_rgb(); + #endif -#ifdef ENCODER_ENABLE +#ifdef OLED_ENABLE -# define MEDIA_KEY_DELAY 10 + init_timer(); -static inline void my_encoders(const uint8_t index, const bool clockwise) { - if (index == 0) { /* First encoder */ - if (IS_LAYER_ON(_LWR)) { - if (clockwise) { - rgblight_decrease_val_noeeprom(); - } else { - rgblight_increase_val_noeeprom(); - } - } else if (IS_LAYER_ON(_RSE)) { - if (clockwise) { - rgblight_decrease_hue_noeeprom(); - } else { - rgblight_increase_hue_noeeprom(); - } - - } else { - if (clockwise) { - tap_code_delay(KC_VOLD, MEDIA_KEY_DELAY); - } else { - tap_code_delay(KC_VOLU, MEDIA_KEY_DELAY); - } - } - } -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - my_encoders(index, clockwise); - return true; -} #endif +} diff --git a/keyboards/mlego/m65/keymaps/dk/keymap.c b/keyboards/mlego/m65/keymaps/dk/keymap.c index 5461a354ba1..e44bf2adf25 100644 --- a/keyboards/mlego/m65/keymaps/dk/keymap.c +++ b/keyboards/mlego/m65/keymaps/dk/keymap.c @@ -18,23 +18,6 @@ along with this program. If not, see . #include QMK_KEYBOARD_H #include "keymap_danish.h" -enum layer_names { - _QW = 0, - _LWR, - _RSE, - _ADJ -}; - -#ifdef RGBLIGHT_ENABLE - -const rgblight_segment_t PROGMEM my_qwerty_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_PURPLE}); -const rgblight_segment_t PROGMEM my_lwr_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_CYAN}); -const rgblight_segment_t PROGMEM my_rse_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_RED}); -const rgblight_segment_t PROGMEM my_adj_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_GREEN}); - -const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST(my_qwerty_layer, my_lwr_layer, my_rse_layer, my_adj_layer); -#endif - // clang-format off const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -61,7 +44,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_ADJ] = LAYOUT_ortho_5x13( RGB_MOD,RGB_RMOD, A(KC_F2), _______, _______, _______, _______, _______, _______, _______, _______, RGB_M_T, RGB_M_SW , - RGB_HUI, RGB_HUD, RGB_M_P , _______, RESET , _______, _______, _______, _______, _______, _______, _______, RGB_M_SN , + RGB_HUI, RGB_HUD, RGB_M_P , _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______, RGB_M_SN , RGB_SAI, RGB_SAD, RGB_M_B , _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_M_K , RGB_VAI, RGB_VAD, RGB_M_R , _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_M_X , RGB_TOG, _______, _______ , _______, _______, _______, _______, _______, _______, _______, _______, RGB_M_TW, RGB_M_G), @@ -69,24 +52,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; // clang-format on -// let us assume we start with both layers off -static bool toggle_lwr = false; -static bool toggle_rse = false; - bool led_update_user(led_t led_state) { // Disable the default LED update code, so that lock LEDs could be reused to show layer status. return false; } void matrix_scan_user(void) { - led_lwr(toggle_lwr); - led_rse(toggle_rse); - led_t led_state = host_keyboard_led_state(); - led_caps(led_state.caps_lock); - if (layer_state_is(_ADJ)) { - led_lwr(true); - led_rse(true); - } + + toggle_leds(); + } bool process_record_user(uint16_t keycode, keyrecord_t* record) { @@ -94,13 +68,13 @@ bool process_record_user(uint16_t keycode, keyrecord_t* record) { case (TT(_LWR)): if (!record->event.pressed && record->tap.count == TAPPING_TOGGLE) { // This runs before the TT() handler toggles the layer state, so the current layer state is the opposite of the final one after toggle. - toggle_lwr = !layer_state_is(_LWR); + set_led_toggle(_LWR, !layer_state_is(_LWR)); } return true; break; case (TT(_RSE)): if (record->event.pressed && record->tap.count == TAPPING_TOGGLE) { - toggle_rse = !layer_state_is(_RSE); + set_led_toggle(_RSE, !layer_state_is(_RSE)); } return true; break; @@ -110,61 +84,38 @@ bool process_record_user(uint16_t keycode, keyrecord_t* record) { } layer_state_t layer_state_set_user(layer_state_t state) { + #ifdef RGBLIGHT_ENABLE - rgblight_set_layer_state(0, layer_state_cmp(state, _QW)); - rgblight_set_layer_state(1, layer_state_cmp(state, _LWR)); - rgblight_set_layer_state(2, layer_state_cmp(state, _RSE)); - rgblight_set_layer_state(3, layer_state_cmp(state, _ADJ)); + set_rgb_layers(state); #endif + return update_tri_layer_state(state, _LWR, _RSE, _ADJ); } #ifdef RGBLIGHT_ENABLE layer_state_t default_layer_state_set_user(layer_state_t state) { - rgblight_set_layer_state(0, layer_state_cmp(state, _QW)); + set_default_rgb_layers(state); return state; } +#endif + void keyboard_post_init_user(void) { + +#ifdef RGBLIGHT_ENABLE + // Enable the LED layers - rgblight_layers = my_rgb_layers; -} + rgblight_layers = my_rgb(); + #endif -#ifdef ENCODER_ENABLE +#ifdef OLED_ENABLE -# define MEDIA_KEY_DELAY 10 + init_timer(); -static inline void my_encoders(const uint8_t index, const bool clockwise) { - if (index == 0) { /* First encoder */ - if (IS_LAYER_ON(_LWR)) { - if (clockwise) { - rgblight_decrease_val_noeeprom(); - } else { - rgblight_increase_val_noeeprom(); - } - } else if (IS_LAYER_ON(_RSE)) { - if (clockwise) { - rgblight_decrease_hue_noeeprom(); - } else { - rgblight_increase_hue_noeeprom(); - } - - } else { - if (clockwise) { - tap_code_delay(KC_VOLD, MEDIA_KEY_DELAY); - } else { - tap_code_delay(KC_VOLU, MEDIA_KEY_DELAY); - } - } - } -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - my_encoders(index, clockwise); - return true; -} #endif + +} diff --git a/keyboards/mlego/m65/keymaps/uk/keymap.c b/keyboards/mlego/m65/keymaps/uk/keymap.c index b140ca08c67..3a4c6a4bc34 100644 --- a/keyboards/mlego/m65/keymaps/uk/keymap.c +++ b/keyboards/mlego/m65/keymaps/uk/keymap.c @@ -18,40 +18,12 @@ along with this program. If not, see . #include QMK_KEYBOARD_H #include "keymap_uk.h" -enum layer_names { - _QW = 0, - _LWR, - _RSE, - _ADJ -}; - #ifdef CONSOLE_ENABLE #include "print.h" #endif -#ifdef OLED_ENABLE -static uint32_t oled_logo_timer = 0; -static bool clear_logo = true; -static const char PROGMEM m65_logo[] = { - 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa5, 0xa5, 0xa5, 0xa5, 0xa5, 0xa5, - 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, - 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, - 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, - 0}; -#endif - -#ifdef RGBLIGHT_ENABLE - -const rgblight_segment_t PROGMEM my_qwerty_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_PURPLE}); -const rgblight_segment_t PROGMEM my_lwr_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_CYAN}); -const rgblight_segment_t PROGMEM my_rse_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_RED}); -const rgblight_segment_t PROGMEM my_adj_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_GREEN}); - -const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST(my_qwerty_layer, my_lwr_layer, my_rse_layer, my_adj_layer); -#endif - const uint32_t PROGMEM unicode_map[] = { [la] = 0x03B1 , // α [lA] = 0x0391 , // Α @@ -254,7 +226,7 @@ raise layer shifted KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______,XP(ra1,rA1), _______, _______, _______,XP(rt,rT), _______, _______,XP(ri,rI), _______, _______, _______, _______ , KC_CAPS, XP(ra,rA), XP(rs,rS), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ , - _______, _______, _______, _______,XP(rc,rC), _______, _______, _______, _______, _______, _______, KC_WH_U, _______ , + _______, KC_F20 , _______, _______,XP(rc,rC), _______, _______, _______, _______, _______, _______, KC_WH_U, _______ , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_WH_L, KC_WH_D, KC_WH_R), /* adj layer @@ -272,49 +244,43 @@ adj layer */ [_ADJ] = LAYOUT_ortho_5x13( RGB_MOD, RGB_RMOD, A(KC_F2), _______, _______, _______, _______, _______, _______, _______, _______, RGB_M_T , RGB_M_SW, - RGB_HUI, RGB_HUD , RGB_M_P , _______, RESET , _______, _______, _______, _______, _______, _______, _______ , RGB_M_SN, + RGB_HUI, RGB_HUD , RGB_M_P , _______, QK_BOOT, _______, _______, _______, _______, _______, _______, _______ , RGB_M_SN, RGB_SAI, RGB_SAD , RGB_M_B , _______, _______, _______, _______, _______, _______, _______, _______, _______ , RGB_M_K , RGB_VAI, RGB_VAD , RGB_M_R , _______, _______, _______, _______, _______, _______, _______, _______, _______ , RGB_M_X , RGB_TOG, _______ , _______ , _______, _______, _______, _______, _______, _______, _______, _______, RGB_M_TW, RGB_M_G), }; // clang-format on -// let us assume we start with both layers off -static bool toggle_lwr = false; -static bool toggle_rse = false; - bool led_update_user(led_t led_state) { // Disable the default LED update code, so that lock LEDs could be reused to show layer status. return false; } void matrix_scan_user(void) { - led_lwr(toggle_lwr); - led_rse(toggle_rse); - led_t led_state = host_keyboard_led_state(); - led_caps(led_state.caps_lock); - if (layer_state_is(_ADJ)) { - led_lwr(true); - led_rse(true); - } + + toggle_leds(); + } bool process_record_user(uint16_t keycode, keyrecord_t* record) { + #ifdef CONSOLE_ENABLE + uprintf("KL: kc: 0x%04X, col: %u, row: %u, pressed: %b, time: %u, interrupt: %b, count: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed, record->event.time, record->tap.interrupted, record->tap.count); + #endif switch (keycode) { case (TT(_LWR)): if (!record->event.pressed && record->tap.count == TAPPING_TOGGLE) { // This runs before the TT() handler toggles the layer state, so the current layer state is the opposite of the final one after toggle. - toggle_lwr = !layer_state_is(_LWR); + set_led_toggle(_LWR, !layer_state_is(_LWR)); } return true; break; case (TT(_RSE)): if (record->event.pressed && record->tap.count == TAPPING_TOGGLE) { - toggle_rse = !layer_state_is(_RSE); + set_led_toggle(_RSE, !layer_state_is(_RSE)); } return true; break; @@ -324,29 +290,38 @@ bool process_record_user(uint16_t keycode, keyrecord_t* record) { } layer_state_t layer_state_set_user(layer_state_t state) { + #ifdef RGBLIGHT_ENABLE - rgblight_set_layer_state(0, layer_state_cmp(state, _QW)); - rgblight_set_layer_state(1, layer_state_cmp(state, _LWR)); - rgblight_set_layer_state(2, layer_state_cmp(state, _RSE)); - rgblight_set_layer_state(3, layer_state_cmp(state, _ADJ)); + set_rgb_layers(state); #endif + return update_tri_layer_state(state, _LWR, _RSE, _ADJ); } #ifdef RGBLIGHT_ENABLE layer_state_t default_layer_state_set_user(layer_state_t state) { - rgblight_set_layer_state(0, layer_state_cmp(state, _QW)); + + set_default_rgb_layers(state); return state; } +#endif + void keyboard_post_init_user(void) { - // Enable the LED layers - rgblight_layers = my_rgb_layers; +#ifdef RGBLIGHT_ENABLE + + // Enable the LED layers + rgblight_layers = my_rgb(); + +#endif + #ifdef OLED_ENABLE - oled_logo_timer = timer_read32(); + + init_timer(); + #endif #ifdef CONSOLE_ENABLE @@ -354,109 +329,6 @@ void keyboard_post_init_user(void) { debug_enable = true; debug_matrix = true; debug_keyboard = true; -#endif -} -#endif - -#ifdef ENCODER_ENABLE - -# define MEDIA_KEY_DELAY 10 - -static inline void my_encoders(const uint8_t index, const bool clockwise) { - if (index == 0) { /* First encoder */ - if (IS_LAYER_ON(_LWR)) { - if (clockwise) { - rgblight_decrease_val_noeeprom(); - } else { - rgblight_increase_val_noeeprom(); - } - } else if (IS_LAYER_ON(_RSE)) { - if (clockwise) { - rgblight_decrease_hue_noeeprom(); - } else { - rgblight_increase_hue_noeeprom(); - } - - } else { - if (clockwise) { - tap_code_delay(KC_VOLD, MEDIA_KEY_DELAY); - } else { - tap_code_delay(KC_VOLU, MEDIA_KEY_DELAY); - } - } - } -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - my_encoders(index, clockwise); - return true; -} -#endif - -#ifdef OLED_ENABLE - -static void render_logo(void) { - oled_write_P(m65_logo, false); -} - -void user_oled_magic(void) { - // Host Keyboard Layer Status - oled_write_P(PSTR("Layer: "), false); - - switch (get_highest_layer(layer_state)) { - case _QW: - oled_write_P(PSTR("Default\n"), false); - break; - case _LWR: - oled_write_P(PSTR("Lower\n"), false); - break; - case _RSE: - oled_write_P(PSTR("Raise\n"), false); - break; - case _ADJ: - oled_write_P(PSTR("ADJ\n"), false); - break; - default: - // Or use the write_ln shortcut over adding '\n' to the end of your string - oled_write_ln_P(PSTR("Undefined"), false); - } - - // Host Keyboard LED Status - led_t led_state = host_keyboard_led_state(); - oled_write_P(led_state.num_lock ? PSTR("Lower ") : PSTR(" "), false); - oled_write_P(led_state.scroll_lock ? PSTR("Raise ") : PSTR(" "), false); - oled_write_P(led_state.caps_lock ? PSTR("CapsLock ") : PSTR(" "), false); -#ifdef WPM_ENABLE - oled_write_P(PSTR("\nwpm: "), false); - uint8_t wpm = get_current_wpm(); - oled_write_P(wpm != 0 ? get_u8_str(wpm,' ') : PSTR(" "), false); -#endif -} - -oled_rotation_t oled_init_user(oled_rotation_t rotation) { - return OLED_ROTATION_180; -} - -void clear_screen(void) { - if (clear_logo){ - for (uint8_t i = 0; i < OLED_DISPLAY_HEIGHT; ++i) { - for (uint8_t j = 0; j < OLED_DISPLAY_WIDTH; ++j) { - oled_write_raw_byte(0x0, i*OLED_DISPLAY_WIDTH + j); - } - } - clear_logo = false; - } -} - -# define SHOW_LOGO 5000 -bool oled_task_user(void) { - if ((timer_elapsed32(oled_logo_timer) < SHOW_LOGO)){ - render_logo(); - }else{ - clear_screen(); - user_oled_magic(); - } - return false; -} #endif +} diff --git a/keyboards/mlego/m65/keymaps/via/keymap.c b/keyboards/mlego/m65/keymaps/via/keymap.c index 831a2a72e44..e88c9207e42 100644 --- a/keyboards/mlego/m65/keymaps/via/keymap.c +++ b/keyboards/mlego/m65/keymaps/via/keymap.c @@ -17,23 +17,6 @@ along with this program. If not, see . #include QMK_KEYBOARD_H -enum layer_names { - _QW = 0, - _LWR, - _RSE, - _ADJ -}; - -#ifdef RGBLIGHT_ENABLE - -const rgblight_segment_t PROGMEM my_qwerty_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_PURPLE}); -const rgblight_segment_t PROGMEM my_lwr_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_CYAN}); -const rgblight_segment_t PROGMEM my_rse_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_RED}); -const rgblight_segment_t PROGMEM my_adj_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_GREEN}); - -const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST(my_qwerty_layer, my_lwr_layer, my_rse_layer, my_adj_layer); -#endif - // clang-format off const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -67,24 +50,15 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; // clang-format on -// let us assume we start with both layers off -static bool toggle_lwr = false; -static bool toggle_rse = false; - bool led_update_user(led_t led_state) { // Disable the default LED update code, so that lock LEDs could be reused to show layer status. return false; } void matrix_scan_user(void) { - led_lwr(toggle_lwr); - led_rse(toggle_rse); - led_t led_state = host_keyboard_led_state(); - led_caps(led_state.caps_lock); - if (layer_state_is(_ADJ)) { - led_lwr(true); - led_rse(true); - } + + toggle_leds(); + } bool process_record_user(uint16_t keycode, keyrecord_t* record) { @@ -92,13 +66,13 @@ bool process_record_user(uint16_t keycode, keyrecord_t* record) { case (TT(_LWR)): if (!record->event.pressed && record->tap.count == TAPPING_TOGGLE) { // This runs before the TT() handler toggles the layer state, so the current layer state is the opposite of the final one after toggle. - toggle_lwr = !layer_state_is(_LWR); + set_led_toggle(_LWR, !layer_state_is(_LWR)); } return true; break; case (TT(_RSE)): if (record->event.pressed && record->tap.count == TAPPING_TOGGLE) { - toggle_rse = !layer_state_is(_RSE); + set_led_toggle(_RSE, !layer_state_is(_RSE)); } return true; break; @@ -108,118 +82,37 @@ bool process_record_user(uint16_t keycode, keyrecord_t* record) { } layer_state_t layer_state_set_user(layer_state_t state) { + #ifdef RGBLIGHT_ENABLE - rgblight_set_layer_state(0, layer_state_cmp(state, _QW)); - rgblight_set_layer_state(1, layer_state_cmp(state, _LWR)); - rgblight_set_layer_state(2, layer_state_cmp(state, _RSE)); - rgblight_set_layer_state(3, layer_state_cmp(state, _ADJ)); + set_rgb_layers(state); #endif + return update_tri_layer_state(state, _LWR, _RSE, _ADJ); } #ifdef RGBLIGHT_ENABLE layer_state_t default_layer_state_set_user(layer_state_t state) { - rgblight_set_layer_state(0, layer_state_cmp(state, _QW)); + set_default_rgb_layers(state); return state; } -void keyboard_post_init_user(void) { - // Enable the LED layers - rgblight_layers = my_rgb_layers; -} #endif -#ifdef ENCODER_ENABLE +void keyboard_post_init_user(void) { -# define MEDIA_KEY_DELAY 10 +#ifdef RGBLIGHT_ENABLE -static inline void my_encoders(const uint8_t index, const bool clockwise) { - if (index == 0) { /* First encoder */ - if (IS_LAYER_ON(_LWR)) { - if (clockwise) { - rgblight_decrease_val_noeeprom(); - } else { - rgblight_increase_val_noeeprom(); - } - } else if (IS_LAYER_ON(_RSE)) { - if (clockwise) { - rgblight_decrease_hue_noeeprom(); - } else { - rgblight_increase_hue_noeeprom(); - } + // Enable the LED layers + rgblight_layers = my_rgb(); - } else { - if (clockwise) { - tap_code_delay(KC_VOLD, MEDIA_KEY_DELAY); - } else { - tap_code_delay(KC_VOLU, MEDIA_KEY_DELAY); - } - } - } -} - -bool encoder_update_user(uint8_t index, bool clockwise) { - my_encoders(index, clockwise); - return true; -} #endif #ifdef OLED_ENABLE -static void render_logo(void) { - static const char PROGMEM m65_logo[] = { -// 'slon', 128x32px -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x40, 0xc0, 0xa0, 0xa0, -0xa0, 0xd0, 0xf0, 0xe0, 0xe0, 0xe0, 0xe0, 0xc0, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x0c, 0xc3, 0x3c, 0x0f, 0x05, 0x14, 0x14, -0x04, 0xfc, 0x9f, 0x88, 0x80, 0x81, 0xe7, 0xfc, 0x03, 0x03, 0x07, 0x05, 0x06, 0x06, 0x08, 0x0c, -0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x04, 0x10, 0x18, 0x30, 0x40, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0xe0, 0xde, 0xc1, 0xf0, 0x89, 0x0b, 0x18, 0x08, 0x04, 0x04, -0x01, 0x1a, 0x0f, 0x00, 0x00, 0x80, 0xc0, 0x20, 0x20, 0x20, 0x60, 0x40, 0x40, 0x42, 0x40, 0x40, -0x40, 0x40, 0x40, 0xe0, 0x60, 0x00, 0x00, 0x00, 0x00, 0x08, 0x13, 0x7c, 0xe0, 0xc0, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x06, 0x06, 0x07, 0x07, 0x07, 0x05, -0x05, 0x05, 0x07, 0x05, 0x07, 0x07, 0x07, 0x07, 0x01, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x01, -0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, -0x02, 0x02, 0x02, 0x03, 0x03, 0x03, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x03, 0x03, 0x07, -0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, -0x04, 0x05, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00 - }; - - oled_write_raw_P(m65_logo, sizeof(m65_logo)); - -} - - -oled_rotation_t oled_init_user(oled_rotation_t rotation) { - return rotation; -} - -bool oled_task_user(void) { - //user_oled_magic(); - render_logo(); - return false; -} + init_timer(); #endif +} diff --git a/keyboards/mlego/m65/m65.c b/keyboards/mlego/m65/m65.c index 153359f3377..3f71a27790b 100644 --- a/keyboards/mlego/m65/m65.c +++ b/keyboards/mlego/m65/m65.c @@ -16,3 +16,189 @@ along with this program. If not, see . */ #include "m65.h" + +// let us assume we start with both layers off +static bool toggle_lwr = false; +static bool toggle_rse = false; + +#ifdef RGBLIGHT_ENABLE + +const rgblight_segment_t PROGMEM my_qwerty_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_PURPLE}); +const rgblight_segment_t PROGMEM my_lwr_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_CYAN}); +const rgblight_segment_t PROGMEM my_rse_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_RED}); +const rgblight_segment_t PROGMEM my_adj_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, RGBLED_NUM, HSV_GREEN}); + +const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST(my_qwerty_layer, my_lwr_layer, my_rse_layer, my_adj_layer); + +#endif + +#ifdef OLED_ENABLE + +static uint32_t oled_logo_timer = 0; +static bool clear_logo = true; +static const char PROGMEM m65_logo[] = { + 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99, 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa5, 0xa5, 0xa5, 0xa5, 0xa5, 0xa5, + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, + 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, + 0}; + +#endif + +#ifdef RGBLIGHT_ENABLE + +void set_rgb_layers(layer_state_t state){ + + rgblight_set_layer_state(0, layer_state_cmp(state, _QW)); + rgblight_set_layer_state(1, layer_state_cmp(state, _LWR)); + rgblight_set_layer_state(2, layer_state_cmp(state, _RSE)); + rgblight_set_layer_state(3, layer_state_cmp(state, _ADJ)); + +} + +void set_default_rgb_layers(layer_state_t state){ + rgblight_set_layer_state(0, layer_state_cmp(state, _QW)); +} + +const rgblight_segment_t * const* my_rgb(void){ + return my_rgb_layers; +} + +#endif + +void set_led_toggle(const uint8_t layer, const bool state){ + + switch (layer) { + case _LWR: + toggle_lwr = state; + break; + case _RSE: + toggle_rse = state; + break; + default: + break; + } +} + +void toggle_leds(void){ + + led_lwr(toggle_lwr); + led_rse(toggle_rse); + led_t led_state = host_keyboard_led_state(); + led_caps(led_state.caps_lock); + if (layer_state_is(_ADJ)) { + led_lwr(true); + led_rse(true); + } + +} + +#ifdef ENCODER_ENABLE + +# define MEDIA_KEY_DELAY 10 + +void my_encoders(const uint8_t index, const bool clockwise) { + if (index == 0) { /* First encoder */ + if (IS_LAYER_ON(_LWR)) { + if (clockwise) { + rgblight_decrease_val_noeeprom(); + } else { + rgblight_increase_val_noeeprom(); + } + } else if (IS_LAYER_ON(_RSE)) { + if (clockwise) { + rgblight_decrease_hue_noeeprom(); + } else { + rgblight_increase_hue_noeeprom(); + } + + } else { + if (clockwise) { + tap_code_delay(KC_VOLD, MEDIA_KEY_DELAY); + } else { + tap_code_delay(KC_VOLU, MEDIA_KEY_DELAY); + } + } + } +} + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + my_encoders(index, clockwise); + return false; +} + +#endif + +#ifdef OLED_ENABLE + +void init_timer(void){ + oled_logo_timer = timer_read32(); +}; + +void user_oled_magic(void) { + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + + switch (get_highest_layer(layer_state)) { + case _QW: + oled_write_P(PSTR("Default\n"), false); + break; + case _LWR: + oled_write_P(PSTR("Lower\n"), false); + break; + case _RSE: + oled_write_P(PSTR("Raise\n"), false); + break; + case _ADJ: + oled_write_P(PSTR("ADJ\n"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR("Undefined"), false); + } + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("Lower ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("Raise ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CapsLock ") : PSTR(" "), false); +#ifdef WPM_ENABLE + oled_write_P(PSTR("\nwpm: "), false); + uint8_t wpm = get_current_wpm(); + oled_write_P(wpm != 0 ? get_u8_str(wpm,' ') : PSTR(" "), false); +#endif +} + +void render_logo(void) { + oled_write_P(m65_logo, false); +} + +void clear_screen(void) { + if (clear_logo){ + for (uint8_t i = 0; i < OLED_DISPLAY_HEIGHT; ++i) { + for (uint8_t j = 0; j < OLED_DISPLAY_WIDTH; ++j) { + oled_write_raw_byte(0x0, i*OLED_DISPLAY_WIDTH + j); + } + } + clear_logo = false; + } +} + +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + return OLED_ROTATION_180; +} + +# define SHOW_LOGO 5000 +bool oled_task_kb(void) { + if (!oled_task_user()) { return false; } + if ((timer_elapsed32(oled_logo_timer) < SHOW_LOGO)){ + render_logo(); + }else{ + clear_screen(); + user_oled_magic(); + } + return false; +} + +#endif diff --git a/keyboards/mlego/m65/m65.h b/keyboards/mlego/m65/m65.h index f5ffd519fa4..9564b3d5290 100644 --- a/keyboards/mlego/m65/m65.h +++ b/keyboards/mlego/m65/m65.h @@ -108,8 +108,44 @@ enum unicode_names { rS, rt, rT, + ro, + rO, + ra2, + rA2, + ra3, + rA3 }; + +enum layer_names { + _QW = 0, + _LWR, + _RSE, + _ADJ +}; + +#ifdef OLED_ENABLE +void user_oled_magic(void); +void render_logo(void); +void clear_screen(void); +void init_timer(void); +#endif + +#ifdef ENCODER_ENABLE +void my_encoders(const uint8_t, const bool); +bool encoder_update_user(uint8_t, bool); +#endif + +#ifdef RGBLIGHT_ENABLE +void set_rgb_layers(layer_state_t); +const rgblight_segment_t * const* my_rgb(void); +void set_default_rgb_layers(layer_state_t); +#endif + + +void toggle_leds(void); +void set_led_toggle(const uint8_t, const bool); + static inline void led_lwr(const bool on) { #ifdef LED_NUM_LOCK_PIN writePin(LED_NUM_LOCK_PIN, on); @@ -123,11 +159,10 @@ static inline void led_rse(const bool on) { } static inline void led_caps(const bool on) { #ifdef LED_CAPS_LOCK_PIN - if ((DEVICE_VER == 0x0001) || (DEVICE_VER == 0x0003) || (DEVICE_VER == 0x0004)) { - writePin(LED_CAPS_LOCK_PIN, !on); - } - if (DEVICE_VER == 0x0002) { + if ((PRODUCT_ID == 0x6061) && (DEVICE_VER == 0x0002)) { writePin(LED_CAPS_LOCK_PIN, on); + } else { + writePin(LED_CAPS_LOCK_PIN, !on); } #endif } diff --git a/keyboards/mlego/m65/rev1/config.h b/keyboards/mlego/m65/rev1/config.h index e0a703c978c..0e40ae2e3da 100644 --- a/keyboards/mlego/m65/rev1/config.h +++ b/keyboards/mlego/m65/rev1/config.h @@ -18,7 +18,7 @@ along with this program. If not, see . #pragma once #define DEVICE_VER 0x0001 -#define PRODUCT_ID 0x6060 +#define PRODUCT_ID 0x6061 #define LED_NUM_LOCK_PIN B12 #define LED_SCROLL_LOCK_PIN B13 diff --git a/keyboards/mlego/m65/rev2/config.h b/keyboards/mlego/m65/rev2/config.h index a548b018270..db13bbb2ad1 100644 --- a/keyboards/mlego/m65/rev2/config.h +++ b/keyboards/mlego/m65/rev2/config.h @@ -18,7 +18,7 @@ along with this program. If not, see . #pragma once #define DEVICE_VER 0x0002 -#define PRODUCT_ID 0x6060 +#define PRODUCT_ID 0x6061 #define LED_NUM_LOCK_PIN B12 #define LED_SCROLL_LOCK_PIN B13 diff --git a/keyboards/mlego/m65/rev3/config.h b/keyboards/mlego/m65/rev3/config.h index 97992ee8443..a4b1ba33433 100644 --- a/keyboards/mlego/m65/rev3/config.h +++ b/keyboards/mlego/m65/rev3/config.h @@ -17,8 +17,8 @@ along with this program. If not, see . #pragma once -#define DEVICE_VER 0x0003 -#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define PRODUCT_ID 0x6062 #define LED_NUM_LOCK_PIN B12 #define LED_SCROLL_LOCK_PIN B13 @@ -31,18 +31,18 @@ along with this program. If not, see . #define MATRIX_COL_PINS \ { A10, A15, B3, B4, B5, B9, B8, B7, A1, A2, A3, A4, B1 } +#ifdef ENCODER_ENABLE #define ENCODERS_PAD_A \ { A0 } #define ENCODERS_PAD_B \ { B6 } +#define ENCODER_RESOLUTION 4 +#endif + +#ifdef RGBLIGHT_ENABLE #define RGB_DI_PIN B15 - -#define UNUSED_PINS #define RGBLIGHT_LAYERS - -#define ENCODER_RESOLUTION 4 - #undef RGBLED_NUM #define RGBLED_NUM 20 #define RGBLIGHT_EFFECT_BREATHING @@ -57,3 +57,8 @@ along with this program. If not, see . #define RGBLIGHT_EFFECT_TWINKLE #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 +#endif + +#define UNUSED_PINS +// you want to comment this if using stm32-dfu as bootloader +#define FEE_PAGE_BASE_ADDRESS 0x08008000 diff --git a/keyboards/mlego/m65/rev3/ld/STM32F401xE.ld b/keyboards/mlego/m65/rev3/ld/STM32F401xE.ld new file mode 100644 index 00000000000..daec7d85834 --- /dev/null +++ b/keyboards/mlego/m65/rev3/ld/STM32F401xE.ld @@ -0,0 +1,88 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F401xE memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */ + flash1 (rx) : org = 0x08004000, len = 16k + flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */ + flash3 (rx) : org = 0x0800C000, len = 16k + flash4 (rx) : org = 0x08010000, len = 512k - 64k + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 96k + ram1 (wx) : org = 0x00000000, len = 0 + ram2 (wx) : org = 0x00000000, len = 0 + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x00000000, len = 0 + ram5 (wx) : org = 0x00000000, len = 0 + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash4); +REGION_ALIAS("VECTORS_FLASH_LMA", flash4); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash4); +REGION_ALIAS("XTORS_FLASH_LMA", flash4); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash4); +REGION_ALIAS("TEXT_FLASH_LMA", flash4); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash4); +REGION_ALIAS("RODATA_FLASH_LMA", flash4); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash4); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash4); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash4); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld + +/* TinyUF2 bootloader reset support */ +_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */ diff --git a/keyboards/mlego/m65/rev3/rules.mk b/keyboards/mlego/m65/rev3/rules.mk index 25df19c15fa..558accd5b15 100644 --- a/keyboards/mlego/m65/rev3/rules.mk +++ b/keyboards/mlego/m65/rev3/rules.mk @@ -2,7 +2,10 @@ MCU = STM32F401 # Bootloader selection -BOOTLOADER = stm32-dfu +BOOTLOADER = tinyuf2 +#BOOTLOADER = stm32-dfu +MCU_LDSCRIPT = STM32F401xE +EEPROM_DRIVER = vendor # Build Options # change yes to no to disable diff --git a/keyboards/mlego/m65/rev4/config.h b/keyboards/mlego/m65/rev4/config.h index ee47061a91f..07dd0fefaab 100644 --- a/keyboards/mlego/m65/rev4/config.h +++ b/keyboards/mlego/m65/rev4/config.h @@ -17,8 +17,8 @@ along with this program. If not, see . #pragma once -#define DEVICE_VER 0x0004 -#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0002 +#define PRODUCT_ID 0x6062 #define LED_NUM_LOCK_PIN B12 #define LED_SCROLL_LOCK_PIN B13 @@ -31,18 +31,18 @@ along with this program. If not, see . #define MATRIX_COL_PINS \ { B14, A8, A10, A15, B3, B4, B5, B7, A1, A2, A3, A4, B1 } +#ifdef ENCODER_ENABLE #define ENCODERS_PAD_A \ { A0 } #define ENCODERS_PAD_B \ { B6 } +#define ENCODER_RESOLUTION 4 +#endif + +#ifdef RGBLIGHT_ENABLE #define RGB_DI_PIN B15 - -#define UNUSED_PINS #define RGBLIGHT_LAYERS - -#define ENCODER_RESOLUTION 4 - #undef RGBLED_NUM #define RGBLED_NUM 20 #define RGBLIGHT_EFFECT_BREATHING @@ -58,6 +58,8 @@ along with this program. If not, see . #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 +#endif + #ifdef OLED_ENABLE # define OLED_DISPLAY_128X32 #define I2C1_SCL_PIN B9 @@ -65,3 +67,7 @@ along with this program. If not, see . #define OLED_BRIGHTNESS 128 #define OLED_FONT_H "keyboards/mlego/m65/lib/glcdfont.c" #endif + +#define UNUSED_PINS +// you want to comment this if using stm32-dfu as bootloader +#define FEE_PAGE_BASE_ADDRESS 0x08008000 diff --git a/keyboards/mlego/m65/rev4/ld/STM32F401xE.ld b/keyboards/mlego/m65/rev4/ld/STM32F401xE.ld new file mode 100644 index 00000000000..daec7d85834 --- /dev/null +++ b/keyboards/mlego/m65/rev4/ld/STM32F401xE.ld @@ -0,0 +1,88 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F401xE memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */ + flash1 (rx) : org = 0x08004000, len = 16k + flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */ + flash3 (rx) : org = 0x0800C000, len = 16k + flash4 (rx) : org = 0x08010000, len = 512k - 64k + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 96k + ram1 (wx) : org = 0x00000000, len = 0 + ram2 (wx) : org = 0x00000000, len = 0 + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x00000000, len = 0 + ram5 (wx) : org = 0x00000000, len = 0 + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash4); +REGION_ALIAS("VECTORS_FLASH_LMA", flash4); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash4); +REGION_ALIAS("XTORS_FLASH_LMA", flash4); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash4); +REGION_ALIAS("TEXT_FLASH_LMA", flash4); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash4); +REGION_ALIAS("RODATA_FLASH_LMA", flash4); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash4); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash4); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash4); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld + +/* TinyUF2 bootloader reset support */ +_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */ diff --git a/keyboards/mlego/m65/rev4/rules.mk b/keyboards/mlego/m65/rev4/rules.mk index 9e1e0ab23bc..bf4285383a0 100644 --- a/keyboards/mlego/m65/rev4/rules.mk +++ b/keyboards/mlego/m65/rev4/rules.mk @@ -2,7 +2,10 @@ MCU = STM32F401 # Bootloader selection -BOOTLOADER = stm32-dfu +BOOTLOADER = tinyuf2 +#BOOTLOADER = stm32-dfu +MCU_LDSCRIPT = STM32F401xE +EEPROM_DRIVER = vendor # Build Options # change yes to no to disable