diff --git a/keyboards/ai/readme.md b/keyboards/ai/readme.md
index 670996640fb..f61e4933ac5 100644
--- a/keyboards/ai/readme.md
+++ b/keyboards/ai/readme.md
@@ -31,4 +31,4 @@ Enter the bootloader in 3 ways:
 
 -   **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
 -   **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
--   **Keycode in layout**: Press the key mapped to `RESET` if it is available
+-   **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/aidansmithdotdev/fine40/readme.md b/keyboards/aidansmithdotdev/fine40/readme.md
index ad3eba7c5cc..19d23fb914e 100644
--- a/keyboards/aidansmithdotdev/fine40/readme.md
+++ b/keyboards/aidansmithdotdev/fine40/readme.md
@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key) and plug in the keyboard
 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/at_at/660m/config.h b/keyboards/at_at/660m/config.h
index b3676e97043..cdb9b81967c 100644
--- a/keyboards/at_at/660m/config.h
+++ b/keyboards/at_at/660m/config.h
@@ -17,7 +17,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* LSE clock */
diff --git a/keyboards/boardrun/bizarre/readme.md b/keyboards/boardrun/bizarre/readme.md
index 5c73313d381..3ca84dfac27 100644
--- a/keyboards/boardrun/bizarre/readme.md
+++ b/keyboards/boardrun/bizarre/readme.md
@@ -18,6 +18,6 @@ Flashing example for this keyboard:
 
     make boardrun/bizarre:default:flash
     
-The board may be reset into bootloader mode via either the reset button (on the bottom of the PCB) or a configured RESET shortcut (which may vary depending on when the PCB was flashed).
+The board may be reset into bootloader mode via either the reset button (on the bottom of the PCB) or a configured `QK_BOOT` shortcut (which may vary depending on when the PCB was flashed).
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/boardrun/classic/readme.md b/keyboards/boardrun/classic/readme.md
index 2ed4ff1bd01..eeb2c0d55c8 100644
--- a/keyboards/boardrun/classic/readme.md
+++ b/keyboards/boardrun/classic/readme.md
@@ -18,6 +18,6 @@ Flashing example for this keyboard:
     
     make boardrun/classic:default:flash
 
-The board may be reset into bootloader mode via either the reset button (on the bottom of the PCB) or a configured RESET shortcut (which may vary depending on when the PCB was flashed).
+The board may be reset into bootloader mode via either the reset button (on the bottom of the PCB) or a configured `QK_BOOT` shortcut (which may vary depending on when the PCB was flashed).
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/cannonkeys/malicious_ergo/readme.md b/keyboards/cannonkeys/malicious_ergo/readme.md
index 2103fe04db8..72cb9630701 100644
--- a/keyboards/cannonkeys/malicious_ergo/readme.md
+++ b/keyboards/cannonkeys/malicious_ergo/readme.md
@@ -13,6 +13,6 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
 * **Physical reset button**: Toggle the switch on the back of the pcb to "0" and briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/cannonkeys/nearfield/readme.md b/keyboards/cannonkeys/nearfield/readme.md
index ea63a5f2218..fca9388ce79 100644
--- a/keyboards/cannonkeys/nearfield/readme.md
+++ b/keyboards/cannonkeys/nearfield/readme.md
@@ -26,6 +26,6 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the top left key and plug in the keyboard
 * **Physical reset button**: Briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/cannonkeys/satisfaction75/config.h b/keyboards/cannonkeys/satisfaction75/config.h
index ef4123770d1..615ad1d0564 100644
--- a/keyboards/cannonkeys/satisfaction75/config.h
+++ b/keyboards/cannonkeys/satisfaction75/config.h
@@ -17,7 +17,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* LSE clock */
diff --git a/keyboards/capsunlocked/cu75/cu75.c b/keyboards/capsunlocked/cu75/cu75.c
index e52edd90fab..690d72055ac 100644
--- a/keyboards/capsunlocked/cu75/cu75.c
+++ b/keyboards/capsunlocked/cu75/cu75.c
@@ -91,7 +91,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record)
     if (click_toggle && record->event.pressed){
         click(click_hz, click_time);
     }
-    if (keycode == RESET) {
+    if (keycode == QK_BOOT) {
         reset_keyboard_kb();
     } else {
     }
diff --git a/keyboards/carbo65/config.h b/keyboards/carbo65/config.h
index 2e547604d10..dfbd4db1ac9 100644
--- a/keyboards/carbo65/config.h
+++ b/keyboards/carbo65/config.h
@@ -32,7 +32,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* Indicator LEDs */
diff --git a/keyboards/clueboard/66/rev4/mine/keymap.c b/keyboards/clueboard/66/rev4/mine/keymap.c
deleted file mode 100644
index df145eb4885..00000000000
--- a/keyboards/clueboard/66/rev4/mine/keymap.c
+++ /dev/null
@@ -1,13 +0,0 @@
-#include QMK_KEYBOARD_H
-
-/* THIS FILE WAS GENERATED!
- *
- * This file was generated by qmk json2c. You may or may not want to
- * edit it directly.
- */
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-	[0] = LAYOUT(KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
-	[1] = LAYOUT(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_MUTE, KC_VOLD, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(1), KC_TRNS, KC_HOME, KC_PGDN, KC_END),
-	[2] = LAYOUT(BL_STEP, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, KC_TRNS, KC_TRNS, MO(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, MO(1), KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI)
-};
diff --git a/keyboards/emery65/config.h b/keyboards/emery65/config.h
index 2e547604d10..dfbd4db1ac9 100644
--- a/keyboards/emery65/config.h
+++ b/keyboards/emery65/config.h
@@ -32,7 +32,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* Indicator LEDs */
diff --git a/keyboards/feker/ik75/readme.md b/keyboards/feker/ik75/readme.md
index ed88e6123ef..e533f4a200a 100644
--- a/keyboards/feker/ik75/readme.md
+++ b/keyboards/feker/ik75/readme.md
@@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Esc key) and plug in the keyboard
 * **Physical reset button**: Briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to RESET if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/fjlabs/avalon/readme.md b/keyboards/fjlabs/avalon/readme.md
index 30e2c49044d..154f48ac6c2 100644
--- a/keyboards/fjlabs/avalon/readme.md
+++ b/keyboards/fjlabs/avalon/readme.md
@@ -16,4 +16,4 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
\ No newline at end of file
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
\ No newline at end of file
diff --git a/keyboards/foostan/cornelius/readme.md b/keyboards/foostan/cornelius/readme.md
index ffd6b60a16d..ce0854dd75e 100644
--- a/keyboards/foostan/cornelius/readme.md
+++ b/keyboards/foostan/cornelius/readme.md
@@ -16,6 +16,6 @@ Flashing example for this keyboard:
 
     make foostan/cornelius:default:flash
 
-The board reset into bootloader mode via either the reset button (on the back of the PCB) or a configured RESET shortcut (which may vary depending on when the PCB was flashed).
+The board reset into bootloader mode via either the reset button (on the back of the PCB) or a configured `QK_BOOT` shortcut (which may vary depending on when the PCB was flashed).
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/hand88/config.h b/keyboards/hand88/config.h
index 78e7dadc9b3..cb2c25cb8fd 100755
--- a/keyboards/hand88/config.h
+++ b/keyboards/hand88/config.h
@@ -32,7 +32,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* Indicator LEDs */
diff --git a/keyboards/handwired/cyberstar/config.h b/keyboards/handwired/cyberstar/config.h
index 755fa5b6c03..bedeb157be7 100644
--- a/keyboards/handwired/cyberstar/config.h
+++ b/keyboards/handwired/cyberstar/config.h
@@ -32,7 +32,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* RGB Light */
diff --git a/keyboards/handwired/dactyl/readme.md b/keyboards/handwired/dactyl/readme.md
index 698ef29e013..e99df7f5a23 100644
--- a/keyboards/handwired/dactyl/readme.md
+++ b/keyboards/handwired/dactyl/readme.md
@@ -21,7 +21,7 @@ To flash the firmware:
   - Load the .hex file into it.
 
   - Put the Teensy in firmware-loading mode:
-    * If your current layout has a RESET key, press it.
+    * If your current layout has a `QK_BOOT` key, press it.
     * If you lack a RESET key, press the reset button on the Teensy board itself.
 
   - Click the button in the Teensy app to download the firmware.
@@ -35,5 +35,5 @@ To flash with ´teensy-loader-cli´:
   - If you like, you can do both at once: `make handwired/dactyl:<keymapname>:teensy`
 
   - Put the Teensy in firmware-loading mode:
-    * If your current layout has a RESET key, press it.
+    * If your current layout has a `QK_BOOT` key, press it.
     * If you lack a RESET key, press the reset button on the Teensy board itself.
diff --git a/keyboards/idobao/id80/v1/readme.md b/keyboards/idobao/id80/v1/readme.md
index 9be4dffeaef..c9c446e1b7f 100644
--- a/keyboards/idobao/id80/v1/readme.md
+++ b/keyboards/idobao/id80/v1/readme.md
@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the Escape key and plug in the keyboard
 * **Physical reset button**: Briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/idobao/id80/v2/readme.md b/keyboards/idobao/id80/v2/readme.md
index 11d98569132..333de28523a 100644
--- a/keyboards/idobao/id80/v2/readme.md
+++ b/keyboards/idobao/id80/v2/readme.md
@@ -38,4 +38,4 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the Escape key and plug in the keyboard
 * **Physical reset button**: Briefly press the button on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available *(default is [Fn]+[Esc])*
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available *(default is [Fn]+[Esc])*
diff --git a/keyboards/jacky_studio/s7_elephant/readme.md b/keyboards/jacky_studio/s7_elephant/readme.md
index 1cfeefb2098..7e441ac8ea1 100644
--- a/keyboards/jacky_studio/s7_elephant/readme.md
+++ b/keyboards/jacky_studio/s7_elephant/readme.md
@@ -15,6 +15,6 @@ Make example for this keyboard (after setting up your build environment):
     make jacky_studio/s7_elephant/rev1:default # 2018 run
     make jacky_studio/s7_elephant/rev2:default # 2019 run
 
-To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer.
+To enter the bootloader, either short the pins on the PCB or the `QK_BOOT` key on the FN layer.
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/jacky_studio/s7_elephant/rev1/readme.md b/keyboards/jacky_studio/s7_elephant/rev1/readme.md
index 702be4c3a78..8308f60f627 100644
--- a/keyboards/jacky_studio/s7_elephant/rev1/readme.md
+++ b/keyboards/jacky_studio/s7_elephant/rev1/readme.md
@@ -12,6 +12,6 @@ Make example for this keyboard (after setting up your build environment):
 
     make s7_elephant/rev1:default
 
-To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer.
+To enter the bootloader, either short the pins on the PCB or the `QK_BOOT` key on the FN layer.
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/kegen/gboy/readme.md b/keyboards/kegen/gboy/readme.md
index 942d50d308b..25ca760ff49 100644
--- a/keyboards/kegen/gboy/readme.md
+++ b/keyboards/kegen/gboy/readme.md
@@ -25,4 +25,4 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/lazydesigners/bolt/readme.md b/keyboards/lazydesigners/bolt/readme.md
index d89bca097e8..4d759ea7064 100644
--- a/keyboards/lazydesigners/bolt/readme.md
+++ b/keyboards/lazydesigners/bolt/readme.md
@@ -16,6 +16,6 @@ Flashing example for this keyboard:
 
     make lazydesigners/bolt:default:flash
 
-**Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the RESET button on the FN layer.
+**Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the `QK_BOOT` key on the FN layer.
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/lazydesigners/cassette8/readme.md b/keyboards/lazydesigners/cassette8/readme.md
index 7211bf5e97e..b973c45037d 100755
--- a/keyboards/lazydesigners/cassette8/readme.md
+++ b/keyboards/lazydesigners/cassette8/readme.md
@@ -16,6 +16,6 @@ Flashing example for this keyboard:
 
     make lazydesigners/cassette8:default:flash
 
-**Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the RESET button on the FN layer.
+**Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the `QK_BOOT` key on the FN layer.
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/lazydesigners/dimple/readme.md b/keyboards/lazydesigners/dimple/readme.md
index 2e15cec2b90..b6e59272d67 100644
--- a/keyboards/lazydesigners/dimple/readme.md
+++ b/keyboards/lazydesigners/dimple/readme.md
@@ -21,6 +21,6 @@ Make example for this keyboard (after setting up your build environment):
     make lazydesigners/dimple/staggered/rev2:default
     make lazydesigners/dimple/ortho:default
 
-To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer.
+To enter the bootloader, either short the pins on the PCB or the `QK_BOOT` key on the FN layer.
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/lazydesigners/dimpleplus/readme.md b/keyboards/lazydesigners/dimpleplus/readme.md
index fc5881cdc1c..78db4924277 100644
--- a/keyboards/lazydesigners/dimpleplus/readme.md
+++ b/keyboards/lazydesigners/dimpleplus/readme.md
@@ -14,6 +14,6 @@ Flashing example for this keyboard:
 
     make lazydesigners/dimpleplus:default:flash
 
-**Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the RESET button on the FN layer.
+**Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the `QK_BOOT` key on the FN layer.
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/lazydesigners/the40/readme.md b/keyboards/lazydesigners/the40/readme.md
index e6189675617..2b0a1636281 100644
--- a/keyboards/lazydesigners/the40/readme.md
+++ b/keyboards/lazydesigners/the40/readme.md
@@ -21,6 +21,6 @@ Flashing example for this keyboard:
 
     make lazydesigners/the40:default:flash
 
-**Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the RESET button on the FN layer.
+**Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the `QK_BOOT` key on the FN layer.
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/lazydesigners/the50/readme.md b/keyboards/lazydesigners/the50/readme.md
index d90dc59de6d..5b9e7c7bf77 100644
--- a/keyboards/lazydesigners/the50/readme.md
+++ b/keyboards/lazydesigners/the50/readme.md
@@ -12,6 +12,6 @@ Make example for this keyboard (after setting up your build environment):
 
     make lazydesigners/the50:default:dfu
 
-To enter the bootloader, either short the pins on the PCB or the RESET button on the FN layer.
+To enter the bootloader, either short the pins on the PCB or the `QK_BOOT` key on the FN layer.
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/lazydesigners/the60/rev2/readme.md b/keyboards/lazydesigners/the60/rev2/readme.md
index 2c01cee1d8a..12f51a06af5 100755
--- a/keyboards/lazydesigners/the60/rev2/readme.md
+++ b/keyboards/lazydesigners/the60/rev2/readme.md
@@ -16,6 +16,6 @@
 
      make lazydesigners/the60/rev2:default:flash
 
- **Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the RESET button on the FN layer.
+ **Reset Key:** To enter the bootloader, either push the RESET button on the PCB or the `QK_BOOT` key on the FN layer.
 
  See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file
diff --git a/keyboards/lfkeyboards/lfk65_hs/lfk65_hs.c b/keyboards/lfkeyboards/lfk65_hs/lfk65_hs.c
index 86573ce17f5..7326e812ec5 100644
--- a/keyboards/lfkeyboards/lfk65_hs/lfk65_hs.c
+++ b/keyboards/lfkeyboards/lfk65_hs/lfk65_hs.c
@@ -6,7 +6,7 @@
 
 bool process_record_kb(uint16_t keycode, keyrecord_t* record)
 {
-    if (keycode == RESET) {
+    if (keycode == QK_BOOT) {
         reset_keyboard_kb();
     } else {
     }
diff --git a/keyboards/lfkeyboards/lfk78/lfk78.c b/keyboards/lfkeyboards/lfk78/lfk78.c
index 96fe96f03f7..54a2b45840b 100644
--- a/keyboards/lfkeyboards/lfk78/lfk78.c
+++ b/keyboards/lfkeyboards/lfk78/lfk78.c
@@ -127,7 +127,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
         clicking_notes(click_hz, click_time);
     }
 
-    if (keycode == RESET) {
+    if (keycode == QK_BOOT) {
         reset_keyboard_kb();
     }
 
diff --git a/keyboards/lfkeyboards/lfk87/lfk87.c b/keyboards/lfkeyboards/lfk87/lfk87.c
index 17eeeeffe80..553c66da6d1 100644
--- a/keyboards/lfkeyboards/lfk87/lfk87.c
+++ b/keyboards/lfkeyboards/lfk87/lfk87.c
@@ -109,7 +109,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record)
     if (click_toggle && record->event.pressed){
         click(click_hz, click_time);
     }
-    if (keycode == RESET) {
+    if (keycode == QK_BOOT) {
         reset_keyboard_kb();
     } else {
     }
diff --git a/keyboards/lfkeyboards/mini1800/mini1800.c b/keyboards/lfkeyboards/mini1800/mini1800.c
index 8819d3465aa..ac6b0533b45 100644
--- a/keyboards/lfkeyboards/mini1800/mini1800.c
+++ b/keyboards/lfkeyboards/mini1800/mini1800.c
@@ -115,7 +115,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record)
     if (click_toggle && record->event.pressed){
         click(click_hz, click_time);
     }
-    if (keycode == RESET) {
+    if (keycode == QK_BOOT) {
         reset_keyboard_kb();
     } else {
     }
diff --git a/keyboards/lfkeyboards/smk65/revb/revb.c b/keyboards/lfkeyboards/smk65/revb/revb.c
index 9b34eff1c33..9e78107eca8 100644
--- a/keyboards/lfkeyboards/smk65/revb/revb.c
+++ b/keyboards/lfkeyboards/smk65/revb/revb.c
@@ -74,7 +74,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record)
     if (click_toggle && record->event.pressed){
         click(click_hz, click_time);
     }
-    if (keycode == RESET) {
+    if (keycode == QK_BOOT) {
         reset_keyboard_kb();
     } else {
     }
diff --git a/keyboards/loki65/config.h b/keyboards/loki65/config.h
index aea771f6232..0f4e2c8629a 100644
--- a/keyboards/loki65/config.h
+++ b/keyboards/loki65/config.h
@@ -32,7 +32,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* Indicator LEDs */
diff --git a/keyboards/mechlovin/zed65/readme.md b/keyboards/mechlovin/zed65/readme.md
index 3dc4b4cf676..7da1e7c3658 100644
--- a/keyboards/mechlovin/zed65/readme.md
+++ b/keyboards/mechlovin/zed65/readme.md
@@ -22,4 +22,4 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/mechlovin/zed65/retro66/readme.md b/keyboards/mechlovin/zed65/retro66/readme.md
index 5533020662a..af568441d78 100644
--- a/keyboards/mechlovin/zed65/retro66/readme.md
+++ b/keyboards/mechlovin/zed65/retro66/readme.md
@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/mechlovin/zed65/wearhaus66/readme.md b/keyboards/mechlovin/zed65/wearhaus66/readme.md
index a1ede033dd5..c3f46ae76db 100644
--- a/keyboards/mechlovin/zed65/wearhaus66/readme.md
+++ b/keyboards/mechlovin/zed65/wearhaus66/readme.md
@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Escape) and plug in the keyboard
 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/mnk1800s/config.h b/keyboards/mnk1800s/config.h
index 49cae28b579..e0f17b50a0a 100755
--- a/keyboards/mnk1800s/config.h
+++ b/keyboards/mnk1800s/config.h
@@ -32,7 +32,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
diff --git a/keyboards/mnk50/config.h b/keyboards/mnk50/config.h
index 5458dc44a8c..ef36c3422ee 100755
--- a/keyboards/mnk50/config.h
+++ b/keyboards/mnk50/config.h
@@ -32,7 +32,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
diff --git a/keyboards/mnk75/config.h b/keyboards/mnk75/config.h
index 1e64e8074e2..67d5f857c53 100755
--- a/keyboards/mnk75/config.h
+++ b/keyboards/mnk75/config.h
@@ -32,7 +32,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
diff --git a/keyboards/moonlander/moonlander.c b/keyboards/moonlander/moonlander.c
index e2e163f116a..927c88925ee 100644
--- a/keyboards/moonlander/moonlander.c
+++ b/keyboards/moonlander/moonlander.c
@@ -320,7 +320,7 @@ bool music_mask_kb(uint16_t keycode) {
         case QK_LAYER_TAP_TOGGLE ... QK_LAYER_MOD_MAX:
         case QK_MOD_TAP ... QK_MOD_TAP_MAX:
         case AU_ON ... MUV_DE:
-        case RESET:
+        case QK_BOOT:
         case EEP_RST:
             return false;
         default:
diff --git a/keyboards/nasu/config.h b/keyboards/nasu/config.h
index ec0a22a9a6a..01fe94ceb1b 100644
--- a/keyboards/nasu/config.h
+++ b/keyboards/nasu/config.h
@@ -32,7 +32,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* Indicator LEDs */
diff --git a/keyboards/nullbitsco/tidbit/tidbit.c b/keyboards/nullbitsco/tidbit/tidbit.c
index 6e7ef460e5d..ac297778417 100644
--- a/keyboards/nullbitsco/tidbit/tidbit.c
+++ b/keyboards/nullbitsco/tidbit/tidbit.c
@@ -127,7 +127,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
     }
 
     switch (keycode) {
-        case RESET:
+        case QK_BOOT:
             if (record->event.pressed) {
                 set_bitc_LED(LED_DIM);
                 rgblight_disable_noeeprom();
diff --git a/keyboards/planck/ez/ez.c b/keyboards/planck/ez/ez.c
index 2dcf2f63b38..25dfe9adfb6 100644
--- a/keyboards/planck/ez/ez.c
+++ b/keyboards/planck/ez/ez.c
@@ -322,7 +322,7 @@ bool music_mask_kb(uint16_t keycode) {
     case QK_LAYER_TAP_TOGGLE ... QK_LAYER_MOD_MAX:
     case QK_MOD_TAP ... QK_MOD_TAP_MAX:
     case AU_ON ... MUV_DE:
-    case RESET:
+    case QK_BOOT:
     case EEP_RST:
         return false;
     default:
diff --git a/keyboards/plywrks/lune/keymaps/default/keymap.c b/keyboards/plywrks/lune/keymaps/default/keymap.c
index 8fb0746f434..10471fa35f6 100644
--- a/keyboards/plywrks/lune/keymaps/default/keymap.c
+++ b/keyboards/plywrks/lune/keymaps/default/keymap.c
@@ -24,7 +24,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                  KC_LCTL,          KC_LALT, KC_SPC,  MO(1),            KC_SPC,  KC_RALT,                                              KC_RCTL
     ),
     [1] = LAYOUT_all(
-        RESET,   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,   KC_DEL,
+        QK_BOOT, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,   KC_DEL,
         KC_HOME, _______, _______, KC_UP,   _______, _______, _______, RGB_HUD, RGB_HUI, RGB_SAD, RGB_VAD, RGB_VAI, _______, _______, _______,
         KC_END,  _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,
                  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
diff --git a/keyboards/plywrks/lune/keymaps/via/keymap.c b/keyboards/plywrks/lune/keymaps/via/keymap.c
index b2a7abb603b..f5b11f210a5 100644
--- a/keyboards/plywrks/lune/keymaps/via/keymap.c
+++ b/keyboards/plywrks/lune/keymaps/via/keymap.c
@@ -24,7 +24,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                  KC_LCTL,          KC_LALT, KC_SPC,  MO(1),            KC_SPC,  KC_RALT,                                              KC_RCTL
     ),
     [1] = LAYOUT_all(
-        RESET,   _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,   KC_DEL,
+        QK_BOOT, _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_DEL,   KC_DEL,
         KC_HOME, _______, _______, KC_UP,   _______, _______, _______, RGB_HUD, RGB_HUI, RGB_SAD, RGB_VAD, RGB_VAI, _______, _______, _______,
         KC_END,  _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,
                  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
diff --git a/keyboards/protozoa/cassini/config.h b/keyboards/protozoa/cassini/config.h
index 991a33db400..2c95c7be2ac 100644
--- a/keyboards/protozoa/cassini/config.h
+++ b/keyboards/protozoa/cassini/config.h
@@ -32,7 +32,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* Indicator LEDs */
diff --git a/keyboards/rocketboard_16/keycode_lookup.c b/keyboards/rocketboard_16/keycode_lookup.c
index d967a03c316..0e6e47ba0d1 100644
--- a/keyboards/rocketboard_16/keycode_lookup.c
+++ b/keyboards/rocketboard_16/keycode_lookup.c
@@ -288,7 +288,7 @@ lookup_table_t lookup_table[334] =
  {"KC_LT", KC_LT},
  {"KC_GT", KC_GT},
  {"KC_QUES", KC_QUES},
- {"RESET", RESET},
+ {"RESET", QK_BOOT},
  {"DEBUG", DEBUG},
  {"MAGIC_TOGGLE_NKRO", MAGIC_TOGGLE_NKRO},
  {"KC_GESC", KC_GESC},
diff --git a/keyboards/soda/cherish/readme.md b/keyboards/soda/cherish/readme.md
index d30ea11e4cf..9a22e635b2d 100644
--- a/keyboards/soda/cherish/readme.md
+++ b/keyboards/soda/cherish/readme.md
@@ -25,6 +25,6 @@ qmk compile -kb soda/cherish -km via
 Enter the bootloader in 2 ways:
 
 * **Physical reset button**: Briefly press the button: [boot] first, then press button: [reset]  on the back of the PCB
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/spaceholdings/nebula12/config.h b/keyboards/spaceholdings/nebula12/config.h
index 6a2ac596fbd..97623f0ff0c 100755
--- a/keyboards/spaceholdings/nebula12/config.h
+++ b/keyboards/spaceholdings/nebula12/config.h
@@ -19,7 +19,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "config_common.h"
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* LSE clock */
@@ -39,7 +39,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* Setting up 400KHz I2C Clock for a 48MHz system clock */
diff --git a/keyboards/system76/launch_1/launch_1.c b/keyboards/system76/launch_1/launch_1.c
index 74288edf034..fd780f6fee2 100644
--- a/keyboards/system76/launch_1/launch_1.c
+++ b/keyboards/system76/launch_1/launch_1.c
@@ -182,7 +182,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
     }
 
     switch (keycode) {
-        case RESET:
+        case QK_BOOT:
             if (record->event.pressed) {
                 system76_ec_unlock();
             }
diff --git a/keyboards/w1_at/config.h b/keyboards/w1_at/config.h
index 884b292447e..e04d3b15efd 100644
--- a/keyboards/w1_at/config.h
+++ b/keyboards/w1_at/config.h
@@ -32,7 +32,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* Indicator LEDs */
diff --git a/keyboards/westm/westm68/config.h b/keyboards/westm/westm68/config.h
index 1d4d028e9fd..3909c3e5e28 100644
--- a/keyboards/westm/westm68/config.h
+++ b/keyboards/westm/westm68/config.h
@@ -18,7 +18,7 @@
 
 #include "config_common.h"
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* key matrix size */
diff --git a/keyboards/westm/westm9/config.h b/keyboards/westm/westm9/config.h
index 6d0bf729ac0..51ccf743a06 100644
--- a/keyboards/westm/westm9/config.h
+++ b/keyboards/westm/westm9/config.h
@@ -18,7 +18,7 @@
 
 #include "config_common.h"
 
-/* Ensure we jump to bootloader if the RESET keycode was pressed */
+/* Ensure we jump to bootloader if the QK_BOOT keycode was pressed */
 #define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
 
 /* key matrix size */
diff --git a/keyboards/woodkeys/meira/meira.c b/keyboards/woodkeys/meira/meira.c
index e900fd0dd68..87a6d11b4ee 100644
--- a/keyboards/woodkeys/meira/meira.c
+++ b/keyboards/woodkeys/meira/meira.c
@@ -79,7 +79,7 @@ void matrix_scan_kb(void)
 bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
     // Test code that turns on the switch led for the key that is pressed
     // set_backlight_by_keymap(record->event.key.col, record->event.key.row);
-    if (keycode == RESET) {
+    if (keycode == QK_BOOT) {
         reset_keyboard_kb();
     } else {
     }
diff --git a/keyboards/yoichiro/lunakey_pico/readme.md b/keyboards/yoichiro/lunakey_pico/readme.md
index cb565220af1..9017ad9d36f 100644
--- a/keyboards/yoichiro/lunakey_pico/readme.md
+++ b/keyboards/yoichiro/lunakey_pico/readme.md
@@ -24,4 +24,4 @@ Enter the bootloader in 3 ways:
 
 * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
 * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
-* **Keycode in layout**: Press the key mapped to `RESET` if it is available
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available