* add the ability to exclude keyboards from travis builds
* add filtering to make all:
* only skip keyboards during make all:
* working implementation
* forego a CI_KEYBOARDS variable
* optimize the startup by only listing keyboards once
* add sort -u to all list_keyboard invocations
* move the if else if tree back to 1 level
- Set all other ChibiOS defaults to 'off', when not targeting Proton-C
- Modified all existing F303 boards to point at the QMK_PROTON_C to ensure repeatable binary output
- Modified version.h generation so that SKIP_VERSION=yes generates the same output
* Branch point for 2020 November 28 Breaking Change
* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)
* Add support for soft serial to ATmega32U2 (#10204)
* Change MIDI velocity implementation to allow direct control of velocity value (#9940)
* Add ability to build a subset of all keyboards based on platform.
* Actually use eeprom_driver_init().
* Make bootloader_jump weak for ChibiOS. (#10417)
* Joystick 16-bit support (#10439)
* Per-encoder resolutions (#10259)
* Share button state from mousekey to pointing_device (#10179)
* Add hotfix for chibios keyboards not wake (#10088)
* Add advanced/efficient RGB Matrix Indicators (#8564)
* Naming change.
* Support for STM32 GPIOF,G,H,I,J,K (#10206)
* Add milc as a dependency and remove the installed milc (#10563)
* ChibiOS upgrade: early init conversions (#10214)
* ChibiOS upgrade: configuration file migrator (#9952)
* Haptic and solenoid cleanup (#9700)
* XD75 cleanup (#10524)
* OLED display update interval support (#10388)
* Add definition based on currently-selected serial driver. (#10716)
* New feature: Retro Tapping per key (#10622)
* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)
* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)
* Rescale both ChibiOS and AVR backlighting.
* Reduce Helix keyboard build variation (#8669)
* Minor change to behavior allowing display updates to continue between task ticks (#10750)
* Some GPIO manipulations in matrix.c change to atomic. (#10491)
* qmk cformat (#10767)
* [Keyboard] Update the Speedo firmware for v3.0 (#10657)
* Maartenwut/Maarten namechange to evyd13/Evy (#10274)
* [quantum] combine repeated lines of code (#10837)
* Add step sequencer feature (#9703)
* aeboards/ext65 refactor (#10820)
* Refactor xelus/dawn60 for Rev2 later (#10584)
* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)
* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)
* update chibios os usb for the otg driver (#8893)
* Remove HD44780 References, Part 4 (#10735)
* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)
* Fix cursor position bug in oled_write_raw functions (#10800)
* Fixup version.h writing when using SKIP_VERSION=yes (#10972)
* Allow for certain code in the codebase assuming length of string. (#10974)
* Add AT90USB support for serial.c (#10706)
* Auto shift: support repeats and early registration (#9826)
* Rename ledmatrix.h to match .c file (#7949)
* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)
* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)
* Merge point for 2020 Nov 28 Breaking Change
* Better handle LTO_ENABLE
Especially when calling from command line
* Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE
* Remove long for LTO from show_options.mk
* Added Via config for Clueboard 66
* Update keyboards/clueboard/66/keymaps/via/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Enabled MouseKeys
This required enabling LINK_TIME_OPTIMIZATION_ENABLE
* Added 4th layer as per tzarc's recommendation on another PR
Co-authored-by: Ryan <fauxpark@gmail.com>
* Branch point for 2020 May 30 Breaking Change
* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)
* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)
* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)
* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)
* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)
* Convert V-USB usbdrv to a submodule (#8321)
* Unify Tap Hold functions and documentation (#8348)
* Changing board names to prevent confusion (#8412)
* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)
* Move spaceman keyboards (#8830)
* Migrate miscellaneous `fn_actions` entries (#8977)
* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)
* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)
* Refactor Lily58 to use split_common (#6260)
* Refactor zinc to use split_common (#7114)
* Add a message if bin/qmk doesn't work (#9000)
* Fix conflicting types for 'tfp_printf' (#8269)
* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)
* Refactor and updates to TKC1800 code (#8472)
* Switch to qmk forks for everything (#9019)
* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)
* Audio enable corrections (2/3) (#8903)
* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)
* Audio enable corrections (Part 4) (#8974)
* Fix typo from PR7114 (#9171)
* Augment future branch Changelogs (#8978)
* Revert "Branch point for 2020 May 30 Breaking Change"
* Add backlight custom driver to all boards not declaring it but overriding backlight
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Remove old tmk references from show_options.mk
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Removed reference to firmware size in 0-9,a-f board-level and default keymap 'rules.mk' files
* Correct some 'rules.mk' in boards buried under vendor folders
* PR8027 patch
Co-authored-by: GeorgeKoenig <35542036+GeorgeKoenig@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* fix audio enable repetition
* remove RGB LED support as this board has no RGB LB LEDs
* use pragma once
* this board has no backlight support
* enable COMMAND_ENABLE
* comment cleanups
* setting bootmagic to lite as the first board thathat has this PCB has a solid bottom. If someone forgets to put in a RESET key on their keymap, they are not going to have fun resetting the board
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* convert the palset and palclear routines to setpinoutput and writepinlow
* remove scankb
* restore original guards instead of pragma once
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Fix reversed col 11 and 12
- the two columns are reversed in the matrix
* Fix gui
* Fix reversed col 11 and 12
- the two columns are reversed in the matrix
* Added WOW layer
* Initial commit for this branch. Still a work in progress.
* Added Rorschach keyboard layout.
* Simplified keymap
Removed the media layer to help simplify things. Also corrected some
keymap mistakes in the Qwerty and Colemak layers.
* Added ErgoTravel keymap.
* reverted to previous layout.
* Added Sol keyboard layout.
* Minor changes to keymap.
* more changes
* Added sol graphic by Kagerufu and Cardiactuna
* Added colemak layer because I can.
* more changes to sol layout
* Streamlined Sol layout
* minor tweaks to sol layout
* further revisions to sol keymap.
* Removing deprecated #include statements from my keymaps
* Standardizing keymap `include` lines.
* Minor change to keymap.
Swapped ESC with GRV on all alpha layers.
* Tweaks to Atreus62 Keymap
Added a layer for FPS RPG Loot Shooters.
* Fixed readme.md for Atreus keymap.
Replaced "Keymap" with "Layer" in illustrations for continuity's sake
* More readme.md clean-up
More clarification in the Atreus readme file.
* Next verse, same as the first.
* Changes to Sol layout
Bringing my Sol layout more in line with my other Orthos.
* Fixed keymap GUI.
Replaced left-hand "RGUI" with "LGUI" on all layers as it should be.
* Added ALPS64 keymap
* Formatting corrections
* fixes to config.h and keymap.c
* Fixed errors
This commit fixes a pathing issue in keyboards/orthodox/keymaps/xyverz/config.h
and removes an stupid comma at the end of each LAYOUT stanza in
keyboards/rgbkb/sol/keymaps/xyverz/keymap.c left there by me.
* Fixed orthodox keymap config.h file
I hope this one fixes the problem. *sigh*
* Making suggested changes for PR#6192
Thanks to noroadsleft, fauxpark, and drashna. Still have
more work to do, but at least these suggestions have been applied.
* Fixing build errors
Travis has shown me the error of my ways...
* More fixes and corrections
Those pesky semicolons...
* More Fixes.
* Removing unneeded code snippet.
* fixed omitted semicolons
* Code updates to my keymaps
Updating the code for my Iris, Atreus62, and Atreus keymaps.
* Fixed Atreus62 Keymap
I forgot to add in the aliases for LOWER, RAISE, and ADJUST.
* Added userspace
Also made changes to Atreus62 Keymap to turn the red LEDs off on the ProMicro
* Fixing code that disables LEDs on ProMicros
Also tidied up my ErgoTravel keymap.
* Moving userspace to new branch
Moving my userspace to a new branch for the sake of keeping things
clean on the master branch.
* Added F13-F15 to Atreus62 Layout.
* Update readme.md.
* Updated Phantom keymap to current keymap standards
* Phantom keymap updates
Further updates - tidying and removing cruft.
Thank you zvecr on Discord for the help!
* Standards Updates
Bringing my Kinesis keymap up to current code standards
* Adding a readme
* Bring GH60 code to standard
* Utilizing layouts for 60_ansi and tkl_ansi
Moving my GH60 and Phantom keymaps into layouts/community/
* Alps64 layout removal
Removing my Alps64 keymap now that I've setup my 60_ansi layout.
* Moved Clueboard layout to community/66_ansi.
* Additions to 66_ansi config.h
* Bringing keymaps up to standard.
* More updates to keymaps.
* Syntax updates
* Revert "Syntax updates"
This reverts commit a892b2d9fc.
* Moved WIP keymaps
Moved my WIP keymaps to my wip_keymaps branch to keep my master clean
* Updates requested by noroadsleft
* more changes per noroadsleft
More fixes as requested by noroadsleft. Further tidy-up and
standardization of my keymap code.
* Support for the Clueboard California macropad
* Update keyboards/clueboard/california/config.h
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Move tmk_core/common/backlight to quantum/backlight
* Add guards to backlight inclusion
* Add guards to backlight inclusion
* Update backlight guards on clueboard/60
* Use full paths to avoid vpath issues
* Port personal keymap to 60_tsangan_hhkb
- add 60_tsangan_hhkb layout to plain60
- Fix bug in split rs in plain60
- use community and user based layout for 60_tsangan_hhkb
- set up audio for plain60 only
* Add LAYOUT_60_ansi_split_bs_rshift
* Remove superfluous JTAG disable code
* 32A has differently named register
* Accidentally some operators
* 32A also has different JTAG pins
* Wrap disable_jtag() in an ifndef
* Document this new define
* Rename the define, it conflicts with a LUFA thing
Also, move the ifndef wrapping to the call in keyboard_setup()
* Fix Clueboard hotswap gen1 not compiling when LED Matrix is disabled
* Move keymap.json to default keymap folder
* Revert "Move keymap.json to default keymap folder"
This reverts commit 7f28df909d.
* Script to generate keymap.c from JSON file.
* Support for keymap.json
* Add a warning about the keymap.c getting overwritten.
* Fix keymap generating
* Install the python deps
* Flesh out more of the python environment
* Remove defunct json2keymap
* Style everything with yapf
* Polish up python support
* Hide json keymap.c into the .build dir
* Polish up qmk-compile-json
* Make milc work with positional arguments
* Fix a couple small things
* Fix some errors and make the CLI more understandable
* Make the qmk wrapper more robust
* Add basic QMK Doctor
* Clean up docstrings and flesh them out as needed
* remove unused compile_firmware() function
* Add DFU Suffix for ARM boards
* Blindly flash DFU SUFFIX ARGS for now
* Fix commented out check
* Fix DFU Suffix Argument check
Thank you jack!
* Update Travis CI Scripts to include dfu-util
So we can get dfu-suffix as well
* Manually add dfu-suffix package
* Use external repo for newer version of dfu-util
One that includes dfu-suffix
* Update .travis.yml
* Silence unnecessary output from dfu-suffix
* Remove unnecessary IS_COMMAND definition from clueboard/66_hotswap/gen1
* Remove old-style IS_COMMAND definition comment from dozen0
* Use get_mods() instead of keyboard_report->mods in georgi
* Initial Clueboard 66% arm support
* Fix LAYOUT_66_ansi
* wip
* Bring this branch up to date with led_matrix
* Get Clueboard 66% hotswap working with led_matrix
* stm32 cleanup
* Fix compiling for clueboard 66% hotswap prototype
* Reduce the size of the prototype firmware
* Migrate fn_actions for default keymaps
* Rename the Grave/Escape Shift masks
* No need for shift_esc_shift_mask
* Change breaks to return false
* Right align pointers
* Add default case
* Separate cases with empty lines
* Remove unnecessary IS_COMMAND definition in clueboard/66/rev4
* Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions
* Update docs to use get_mods() instead of keyboard_report->mods
* Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test
For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist
* Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt)
* Add default value for IS_COMMAND for COMMAND feature
* Cleanup and consistency
* Update Templates to reflect change
* Fix IS_COMMAND in template
* Fix IS_COMMAND define
* Use consistent IS_COMMAND block in templates
* Remove unnecessary `#undef IS_COMMAND` directives
* Fix compile issue on orthodox
* Reomve IS_COMMAND option for newer boards
* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting
* Remove a couple of additional IS_COMMAND defines
* Remove remaining redundant IS_COMMAND definitions
* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin
* Remove multiple empty lines in modified config.h files
* Update additional boards
* Reomve IS_COMMAND from newer boards
* Update Alice keyboard
* Remove IS_COMMAND from additional boards
Jan 24th edition
* Cluecard: refactor
- renamed layout macro KEYMAP to LAYOUT
- reformatted layout macro to more closely resemble physical device layout
- keymaps now use #include QMK_KEYBOARD_H
- config.h files updated to use #pragma once method
- deleted outdated QUANTUM_DIR code blocks from rules.mk files
- white space changes on rules.mk files (alignment/readability)
* Cluecard: Configurator support
* Cluecard: readme update
- added image
- updated Docs links
* Clueboard 66% HotSwap: corrected matrix and Configurator data
- removed k31 and k84 from LAYOUT
- both appear to be unsupported for this PCB according to images on clueboard.co
- updated block comment mock-ups to match changes
- rebuilt info.json file
- delete removed keys from default keymap.c
* Clueboard 66% HotSwap: readme update
- fix make example
- updated Docs links
* Clueboard 66% HotSwap: 66_ansi keymap update
Updated to use #include QMK_KEYBOARD_H
* Clueboard 60% refactor
- renamed layout macro KEYMAP to LAYOUT_all
- renamed layout macro KEYMAP_AEK to LAYOUT_aek
- removed redundant KC_TRNS definitions from keymaps
- all keymaps now use #include QMK_KEYBOARD_H
* Clueboard 17%: refactor
* Clueboard 17%: Configurator support
* Clueboard 17%: update Docs links in readme
* Cleanup the 2x1800 files
* Update Clueboard 60% to standard matrix
* Update the clueboard default keymaps
* Refresh and update clueboard 17
* Add the 66% hotswap to Clueboard's readme
* Clarify the 66% hotswap's readme
* change the image to imgur
* Update the clueboard 66 to follow modern standards
* update clueboard 66_hotswap to follow modern practices
* Move the logo to imgur
* update clueboard/card to follow modern practices
* remove clueboard/66 as a valid make target
* Address comments in #4902
* fix user keymaps after the changes
* Remove QUANTUM_DIR code blocks from keyboard rules
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect entire keyboards.
* remove QUANTUM_DIR code blocks from rules for default keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect default keymaps.
* remove QUANTUM_DIR code blocks from rules for user keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect "user" keymaps. (It's actually any keymap
that isn't named `default`.)
* remove QUANTUM_DIR code blocks from rules for community layouts
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for community layouts.
* remove QUANTUM_DIR code blocks from rules for userspaces
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for userspaces.
* Remove chording as it is not documented, not used, and needs work.
* Make Leader Key an optional feature.
* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`
* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
* Temporary work around for CB60 sound issues
Discussed this with @fredizzimo, upping the system ticks to 100K fixes
the sound issues I was having with the CB60; speaker would fail to shut
off after playing music, sometimes at startup. This changes the matrix
scan time from it's default of every 2ms to once ever 200us.
Fred has a more extensive change to the way matrices are scanned which
will require less clock cycles and we can then revert this change at
that time.
* Remove keymap dir from clueboard root
* Adding Rama M10-A Macropad
* ch-ch-ch changes...
* Major overhaul based on SMT's keymap.
* more changes.
* Moved the FKeys to the ADJUST layer.
* More rearranging.
* Alias in Atreus62 keymap to make it more legible
Added config.h to fix tapping_term issue for Caps Lock key in OSX
* Added OrthoDox layout.
* More layout changes.
* Fixing things with the keyboard.
* Finishing touches.
Set left-hand master in config.h
Embedded the arrow keys in keymap.c
* Revised keymap making this easier to use.
* additions and changes.
* changes to various keymaps.
* Minor adjustments to OrthoDox layout.
* Added Eco keymap. Updated Let's Split keymap.
* Added gherkin
* Removed my M10A keymap
* Planck Keymap Updates
Updated my Planck keymap and created a simple keymap for Seph's Preonic.
* Added readme
* readme fixes
* Update readme.md
more clarification
* Keymap Tweaks
Removed the Power button setting from the keymap. It was in a
horrible location. I'll work on getting it setup somewhere else
sometime later.
* Added Readme
I finally got around to adding a readme to this keymap. I've also added minor changes to the layout.
* Fixed Keymap Error
* Fixed Readme
* adding iris and levinson keymaps
* Tweaks to keymap
* added youngJZ keymap
* Changes to keymap
Added a readme.md
* Levinson changes
Added the readme.md and rules.mk files.
Configured RGB underglow and backlighting.
* fixed readme
* changes to keymaps
* Updated keymap
* Updated readme.md
* Updated Readme (again)
* Updated Readme
Fixed formatting. Again.
* Updated readme
This is the last readme update for this keyboard update. I hope.
* Added Contra keymap
* Kinesis Keymap Update
* Updated Keymaps
I've updated my Kinesis (Stapelberg) layout and my Clueboard 66 layout.
I've also updated my Kinesis Readme.
* Clueboard Keymap update
Added media keys to my Clueboard 66 Rev2 layout.
* Added keymap
Added Minidox keymap & rules.
Added user function to Let's Split keymap that turns off the red
LEDs on the Pro Micros.
* New Zen keymap
Added Zen keyboard to my list of keyboards, so had to generate a new
keymap for it.
Also adding some changes to my MiniDox keymap and config.h, as well
as my Levinson's config.h.
The config.h file changes enable ee_hands.
* A few changes for useability
I made a few changes to the Minidox keymap to see if I can't make it more useable.
I'm also working on streamlining the Zen keyboard keymap to reduce layers.
* Re-vamped Iris keymap.
* changes
* minor keymap change
This was a minor keymap change to use mod_tap for the backspace key:
ALT when held, BSPC when tapped.
* Added Fourier keymap
* Keymap Cleanup
Moved KC_ESC to KC_CAPS, and changed KC_ESC to KC_GRV
This is because of muscle memory, I kept hitting ESC when trying to hit TAB.
* Keymap Adjustments
Swapped Caps/Esc, put Caps in Raise/Lower layers, put Grv in normal
Esc position. Adjusted the readme.md to reflect these changes.
* minor tweaks
Added code to disable red ProMicro LEDs after flashing.
* Clean-up
* Corrections to keymap.
Fixed a foul-up in the Zen keymap where the lctrl was where the LOWER
should have been.
* Changes to make this fall in line with the new Layout features
* Moving to LAYOUTs for 4x12 boards
* fixed config.h file
* standardization changes
* Reverted Atreus62 keymap to LAYOUT format
* Switch Preonic and Nyquist to ortho_5x12
* Corrections to config.h
* config.h file tweaks
* config.h file tweaks
* Added missing integers.
* Updated Seph's keymap to LAYOUT standard.
* Keymap tweaks & changes
* Bringing keymap up to LAYOUT standard
* Trying to get LEDs working
* Fixes for Stapelberg
Updated my keymap to confirm to the new LAYOUT standard.
Updated the stapelberg.h to reflect this LAYOUT standard.
Updated the stapelberg.c files to hopefully get the LEDs working.
* Getting closer to Kinesis LED functionality.
* NKRO Fix
Disabled NKRO for VUSB ortho_5x12 boards
* Adding Rama M10-A Macropad
* ch-ch-ch changes...
* Major overhaul based on SMT's keymap.
* more changes.
* Moved the FKeys to the ADJUST layer.
* More rearranging.
* Alias in Atreus62 keymap to make it more legible
Added config.h to fix tapping_term issue for Caps Lock key in OSX
* Added OrthoDox layout.
* More layout changes.
* Fixing things with the keyboard.
* Finishing touches.
Set left-hand master in config.h
Embedded the arrow keys in keymap.c
* Revised keymap making this easier to use.
* additions and changes.
* changes to various keymaps.
* Minor adjustments to OrthoDox layout.
* Added Eco keymap. Updated Let's Split keymap.
* Added gherkin
* Removed my M10A keymap
* Planck Keymap Updates
Updated my Planck keymap and created a simple keymap for Seph's Preonic.
* Added readme
* readme fixes
* Update readme.md
more clarification
* Keymap Tweaks
Removed the Power button setting from the keymap. It was in a
horrible location. I'll work on getting it setup somewhere else
sometime later.
* Added Readme
I finally got around to adding a readme to this keymap. I've also added minor changes to the layout.
* Fixed Keymap Error
* Fixed Readme
* adding iris and levinson keymaps
* Tweaks to keymap
* added youngJZ keymap
* Changes to keymap
Added a readme.md
* Levinson changes
Added the readme.md and rules.mk files.
Configured RGB underglow and backlighting.
* fixed readme
* changes to keymaps
* Updated keymap
* Updated readme.md
* Updated Readme (again)
* Updated Readme
Fixed formatting. Again.
* Updated readme
This is the last readme update for this keyboard update. I hope.
* Added Contra keymap
* Kinesis Keymap Update
* Updated Keymaps
I've updated my Kinesis (Stapelberg) layout and my Clueboard 66 layout.
I've also updated my Kinesis Readme.
* Clueboard Keymap update
Added media keys to my Clueboard 66 Rev2 layout.
* Added keymap
Added Minidox keymap & rules.
Added user function to Let's Split keymap that turns off the red
LEDs on the Pro Micros.
* New Zen keymap
Added Zen keyboard to my list of keyboards, so had to generate a new
keymap for it.
Also adding some changes to my MiniDox keymap and config.h, as well
as my Levinson's config.h.
The config.h file changes enable ee_hands.
* A few changes for useability
I made a few changes to the Minidox keymap to see if I can't make it more useable.
I'm also working on streamlining the Zen keyboard keymap to reduce layers.
* Re-vamped Iris keymap.
* changes
* minor keymap change
This was a minor keymap change to use mod_tap for the backspace key:
ALT when held, BSPC when tapped.
* Added Fourier keymap
* Keymap Cleanup
Moved KC_ESC to KC_CAPS, and changed KC_ESC to KC_GRV
This is because of muscle memory, I kept hitting ESC when trying to hit TAB.
* Keymap Adjustments
Swapped Caps/Esc, put Caps in Raise/Lower layers, put Grv in normal
Esc position. Adjusted the readme.md to reflect these changes.
* minor tweaks
Added code to disable red ProMicro LEDs after flashing.
* Clean-up
* Corrections to keymap.
Fixed a foul-up in the Zen keymap where the lctrl was where the LOWER
should have been.
* Changes to make this fall in line with the new Layout features
* Moving to LAYOUTs for 4x12 boards
* fixed config.h file
* standardization changes
* Reverted Atreus62 keymap to LAYOUT format
* Switch Preonic and Nyquist to ortho_5x12
* Corrections to config.h
* config.h file tweaks
* config.h file tweaks
* Copy Chibios serial_usb_driver into the chibios/protocol
It's renamed to usb_driver to avoid name conflicts
* Make the usb driver compile
* Disable ChibiOS serial usb driver for all keyboards
* Change usb_main to use QMKUSBDriver
* Initialize the usb driver buffers
* Add support for fixed size queues
* Fix USB driver initialization
* Don't transfer an empty packet for fixed size streams
* Move lufa descriptor to protocol/usb_descriptor
* Try to compile usb_descriptor on ChibiOS
* Add lufa_utils for ChibiOS
Lufa USB descriptors for ChibiOS
* More lufa_util compatibility fixes
* First compiling version of shared USB descriptor
* Send the usb descriptors
* Fix the CONSOLE output on ChibiOS
* Add errors for unsupported interfaces
* Enable support for vitual serial port USB descriptors
* Implement virtual serial port for ChibiOS
* Cleanup the lufa_utils
Use the default lufa header files
* Add raw hid support for ChibiOS
This is completely untested
* Enable midi compilation on ChibiOS
* Move midi functionality out of lufa.c
* Don't register sysex callback when not needed
* ChibiOS compilation fixes
* Update ChibiOS submodule
* Fix the Midi USB descriptor
It didn't work properly when both Midi and Virtual serial port was enabled.
* Add MIDI support for ChibiOS
* Fix USB descriptor strings on ChibiOS
* Use serial usb driver for raw hid
* Generalize the ChibiOS stream like drivers
This makes the initialization much more simple and eliminates a lot of
the code duplication.
* Convert console output to chibios stream driver
* Fixes for ChibiOS update
* Update the ChibiOS contrib submodule
To include the usb data toggle synchronization fixes
* Fix duplicate reset enumeration on ChibiOS
* Add missing include
* Add number of endpoints check for ChibiOS
* Enable serial USB driver on all keyboards
* Add missing includes when API is enabled withot midi
* Add another missing inlcude
* Get audio working on clueboard/60
* add keys for music mode
* Change doubles to floats
* add keys for all the songs
* revert to the default startup sound
* Remove music mode until we can figure out why it crashes
* initial clueboard_60 support
* LED lighting support
* fix the clueboard->clueboard_66 rename
* Add layout support to clueboard_60
* Fix the 60_iso layout so it's actually iso
* add a default keymap for AEK layout
* fix clueboard_17
* Fixup the ISO layouts
* Fix the `wait_ms()/wait_us()` definitions for chibios
* Fix up the wait_ms/wait_us hack. Reduce stack size.
* Add a missing #include "wait.h"
* commit files that should have already been comitted
* Remove all Makefiles from the keyboards directory.
* update keymaps added in the last 8 days
* Ignore keyboard/keymap makefiles
* update hand_wire to reflect our new Makefile-less reality
* Update the make guide to reflect the new reality
* move planck keymap options to rules.mk
* update planck keymaps 4real
* trigger travis
* add back build_keyboard.mk
* restore changes to build_keyboard
* Allow the knight animation to be restricted to a portion of the LED strip
* Add keys for jumping directly to particular animation modes
* Remove orphaned break statements
* Tweak the `RGB_MODE` buttons so they cycle through the same mode.
* small indentation fix
* Add a new revision of the clueboard with 18 underlight LEDs
* Allow the knight animation to be restricted to a portion of the LED strip
* Add keys for jumping directly to particular animation modes
* Remove orphaned break statements
* Tweak the `RGB_MODE` buttons so they cycle through the same mode.
* small indentation fix
* include variables and .h files as pp directives
* start layout compilation
* split ergodoxes up
* don't compile all layouts for everything
* might seg fault
* reset layouts variable
* actually reset layouts
* include rules.mk instead
* remove includes from rules.mk
* update variable setting
* load visualizer from path
* adds some more examples
* adds more layouts
* more boards added
* more boards added
* adds documentation for layouts
* use lowercase names for LAYOUT_
* add layout.json files for each layout
* add community folder, default keymaps for layouts
* touch-up default layouts
* touch-up layouts, some keyboard rules.mk
* update documentation for layouts
* fix up serial/i2c switches
* Move Space Caded Parentheses to own layer
The space cadet parentheses where too much distracting. Therefore they are now on the function layer. I also added two more layers for also having angle brackets and curly braces on the shift keys forr better access.
Also updated the README
* Fixed SHIFT+Function key conflict
* Removed Angle Bracket and Curly Bracket layers, as they don't work corrrectly
* Add MIDI layer
* Respect brightness level on layer signalling
* Add hotkey in control layer for signalling state
* Update layout.png
* Remove image and replace it with imgur link
* Fix layer LED signalling in magicmonty keymap
* Include the breathing modes in layer signalling
* Reverts mode to 1 as the other modes flicker
* Add Cursor keys on VIM positions and PAUSE to function layer
* Add 80ms delay for KC_CAPS when used as a tap key
Workaround for the macOS caps lock delay
* Revert "Increase TAPPING_TERM for the Clueboard"
This reverts commit a74e69e9fa.
* Add keymap for smt Clueboard (HHKB layout)
* Add readme for smt Clueboard (HHKB) keymap
* Flesh out the keymap a bit more to support Colemak & Dvorak
* Update README with layout image
This only applies to keymaps that has combined esc/grave. Here we call it theKEY.
Think about the motion when we do shift + theKEY (typing ~), or CMD + theKEY (switching window on MAC). Based on the original code, we must do following sequence: press shift -> press theKEY -> release theKEY -> release shift. However, it is very possible and natural that we do this stroke sequence instead: press shift -> press theKEY -> release shift -> release theKEY.
If we do the 2nd stroke sequence, the code will del_key(ESC) instead of (GRV) when we release theKEY. This caused some inconvenient issues and ghost typing.
By adding a flag, this issue is eliminated and will not affect any other functions.
Moves RGB controls out of the macro function and assigns them their own
keycodes:
RGB_TOG (toggle on/off)
RGB_MOD (mode step)
RGB_HUI (increase hue)
RGB_HUD (decrease hue)
RGB_SAI (increase saturation)
RGB_SAD (decrease saturation)
RGB_VAI (increase brightness)
RGB_VAD (decrease brightness)
* non-working commit
* working
* subprojects implemented for planck
* pass a subproject variable through to c
* consolidates clueboard revisions
* thanks for letting me know about conflicts..
* turn off audio for yang's
* corrects starting paths for subprojects
* messing around with travis
* semicolon
* travis script
* travis script
* script for travis
* correct directory (probably), amend files to commit
* remove origin before adding
* git pull, correct syntax
* git checkout
* git pull origin branch
* where are we?
* where are we?
* merging
* force things to happen
* adds commit message, adds add
* rebase, no commit message
* rebase branch
* idk!
* try just pull
* fetch - merge
* specify repo branch
* checkout
* goddammit
* merge? idk
* pls
* after all
* don't split up keyboards
* syntax
* adds quick for all-keyboards
* trying out new script
* script update
* lowercase
* all keyboards
* stop replacing compiled.hex automatically
* adds if statement
* skip automated build branches
* forces push to automated build branch
* throw an add in there
* upstream?
* adds AUTOGEN
* ignore all .hex files again
* testing out new repo
* global ident
* generate script, keyboard_keymap.hex
* skip generation for now, print pandoc info, submodule update
* try trusty
* and sudo
* try generate
* updates subprojects to keyboards
* no idea
* updates to keyboards
* cleans up clueboard stuff
* setup to use local readme
* updates cluepad, planck experimental
* remove extra led.c [ci skip]
* audio and midi moved over to separate files
* chording, leader, unicode separated
* consolidate each [skip ci]
* correct include
* quantum: Add a tap dance feature (#451)
* quantum: Add a tap dance feature
With this feature one can specify keys that behave differently, based on
the amount of times they have been tapped, and when interrupted, they
get handled before the interrupter.
To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets
explore a certain setup! We want one key to send `Space` on single tap,
but `Enter` on double-tap.
With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and
has the problem that when the sequence is interrupted, the interrupting
key will be send first. Thus, `SPC a` will result in `a SPC` being sent,
if they are typed within `TAPPING_TERM`. With the tap dance feature,
that'll come out as `SPC a`, correctly.
The implementation hooks into two parts of the system, to achieve this:
into `process_record_quantum()`, and the matrix scan. We need the latter
to be able to time out a tap sequence even when a key is not being
pressed, so `SPC` alone will time out and register after `TAPPING_TERM`
time.
But lets start with how to use it, first!
First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because
the feature is disabled by default. This adds a little less than 1k to
the firmware size. Next, you will want to define some tap-dance keys,
which is easiest to do with the `TD()` macro, that - similar to `F()`,
takes a number, which will later be used as an index into the
`tap_dance_actions` array.
This array specifies what actions shall be taken when a tap-dance key is
in action. Currently, there are two possible options:
* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when
tapped once, `kc2` otherwise.
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in
the user keymap - with the current state of the tap-dance action.
The first option is enough for a lot of cases, that just want dual
roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in
`Space` being sent on single-tap, `Enter` otherwise.
And that's the bulk of it!
Do note, however, that this implementation does have some consequences:
keys do not register until either they reach the tapping ceiling, or
they time out. This means that if you hold the key, nothing happens, no
repeat, no nothing. It is possible to detect held state, and register an
action then too, but that's not implemented yet. Keys also unregister
immediately after being registered, so you can't even hold the second
tap. This is intentional, to be consistent.
And now, on to the explanation of how it works!
The main entry point is `process_tap_dance()`, called from
`process_record_quantum()`, which is run for every keypress, and our
handler gets to run early. This function checks whether the key pressed
is a tap-dance key. If it is not, and a tap-dance was in action, we
handle that first, and enqueue the newly pressed key. If it is a
tap-dance key, then we check if it is the same as the already active
one (if there's one active, that is). If it is not, we fire off the old
one first, then register the new one. If it was the same, we increment
the counter and the timer.
This means that you have `TAPPING_TERM` time to tap the key again, you
do not have to input all the taps within that timeframe. This allows for
longer tap counts, with minimal impact on responsiveness.
Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of
tap-dance keys.
For the sake of flexibility, tap-dance actions can be either a pair of
keycodes, or a user function. The latter allows one to handle higher tap
counts, or do extra things, like blink the LEDs, fiddle with the
backlighting, and so on. This is accomplished by using an union, and
some clever macros.
In the end, lets see a full example!
```c
enum {
CT_SE = 0,
CT_CLN,
CT_EGG
};
/* Have the above three on the keymap, TD(CT_SE), etc... */
void dance_cln (qk_tap_dance_state_t *state) {
if (state->count == 1) {
register_code (KC_RSFT);
register_code (KC_SCLN);
unregister_code (KC_SCLN);
unregister_code (KC_RSFT);
} else {
register_code (KC_SCLN);
unregister_code (KC_SCLN);
reset_tap_dance (state);
}
}
void dance_egg (qk_tap_dance_state_t *state) {
if (state->count >= 100) {
SEND_STRING ("Safety dance!");
reset_tap_dance (state);
}
}
const qk_tap_dance_action_t tap_dance_actions[] = {
[CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln)
,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
};
```
This addresses #426.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* hhkb: Fix the build with the new tap-dance feature
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Move process_tap_dance further down
Process the tap dance stuff after midi and audio, because those don't
process keycodes, but row/col positions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Use conditionals instead of dummy functions
To be consistent with how the rest of the quantum features are
implemented, use ifdefs instead of dummy functions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Merge branch 'master' into quantum-keypress-process
# Conflicts:
# Makefile
# keyboards/planck/rev3/config.h
# keyboards/planck/rev4/config.h
* update build script
* non-working commit
* working
* subprojects implemented for planck
* pass a subproject variable through to c
* consolidates clueboard revisions
* thanks for letting me know about conflicts..
* turn off audio for yang's
* corrects starting paths for subprojects
* messing around with travis
* semicolon
* travis script
* travis script
* script for travis
* correct directory (probably), amend files to commit
* remove origin before adding
* git pull, correct syntax
* git checkout
* git pull origin branch
* where are we?
* where are we?
* merging
* force things to happen
* adds commit message, adds add
* rebase, no commit message
* rebase branch
* idk!
* try just pull
* fetch - merge
* specify repo branch
* checkout
* goddammit
* merge? idk
* pls
* after all
* don't split up keyboards
* syntax
* adds quick for all-keyboards
* trying out new script
* script update
* lowercase
* all keyboards
* stop replacing compiled.hex automatically
* adds if statement
* skip automated build branches
* forces push to automated build branch
* throw an add in there
* upstream?
* adds AUTOGEN
* ignore all .hex files again
* testing out new repo
* global ident
* generate script, keyboard_keymap.hex
* skip generation for now, print pandoc info, submodule update
* try trusty
* and sudo
* try generate
* updates subprojects to keyboards
* no idea
* updates to keyboards
* cleans up clueboard stuff
* setup to use local readme
* updates cluepad, planck experimental
* remove extra led.c [ci skip]
* disable power up for now
* config files updates
* makefile updates
* .h file updates, config tuning
* disable audio for yang
