* Better handle LTO_ENABLE
Especially when calling from command line
* Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE
* Remove long for LTO from show_options.mk
* add support for hid gamepad interface
add documentation for HID joystick
Add joystick_task to read analog axes values even when no key is pressed or release. update doc
Update docs/feature_joystick.md
Manage pin setup and read to maintain matrix scan after analog read
* Incorporates patches and changes to HID reporting
There are some patches provided by @a-chol incorporated on this commit,
and also some changes I made to the HID Report structure.
The most interesting is the one dealing with number of buttons: Linux
doesn't seem to care, but Windows requires the HID structure to be byte
aligned (that's in the spec). So if one declares 8/16/32... buttons they
should not have any issues, but this is what happens when you have 9
buttons:
```
bits |0|1|2|3|4|5|6|7|
|*|*|*|*|*|*|*|*| axis 0 (report size 8)
|*|*|*|*|*|*|*|*| ...
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*|
|*|*|*|*|*|*|*|*| axis 6
|*|*|*|*|*|*|*|*| first 8 buttons (report size 1)
|*| | | | | | | | last of 9 buttons, not aligned
```
So for that I added a conditonal that will add a number of reports with
size 1 to make sure it aligns to the next multiple of 8. Those reports
send dummy inputs that don't do anything aside from aligning the data.
Tested on Linux, Windows 10 and Street Fighter (where the joystick is
recognized as direct-input)
* Add save and restore of each pin used in reading joystick (AVR).
Allow output pin to be JS_VIRTUAL_AXIS if the axis is connected to Vcc
instead of an output pin from the MCU.
Fix joystick report id
Fix broken v-usb hid joystick interface. Make it more resilient to unusual settings (none multiple of eight button count, 0 buttons or 0 axes)
Correct adc reading for multiple axes. Piecewise range conversion for uncentered raw value range. Input, output and ground pin configuration per axis.
Documentation fixes
* Fix port addressing for joystick analog read
* The other required set of changes
As per the PR, the changes still holding it up.
Add onekey for testing.
Fix ARM builds.
Fix device descriptor when either axes or buttons is zero.
Add compile-time check for at least one axis or button.
Move definition to try to fix conflict.
PR review comments.
qmk cformat
* avoid float functions to compute range mapping for axis adc reading
* Remove V-USB support for now. Updated docs accordingly.
* Update tmk_core/protocol/lufa/lufa.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add support for joystick adc reading for stm32 MCUs. Fix joystick hid report sending for chibios
* Fix HID joystick report sending for ChibiOS.
Add one analog axis to the onekey:joystick keymap.
Fix pin state save and restore during joystick analog read for STM32
MCUs.
* Update tmk_core/protocol/chibios/usb_main.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/lufa/lufa.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add missing mcuconf.h and halconf.h to onekey:joystick keymap.
Add suggested fixes from PR.
* Switch saveState and restoreState signature to use pin_t type.
onekey:joystick : add a second axis, virtual and programmatically animated.
* Update docs/feature_joystick.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update docs/feature_joystick.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Add PR corrections
* Remove halconf.h and mcuconf.h from onekey keymaps
* Change ADC_PIN to A0
Co-authored-by: achol <allecooll@hotmail.com>
Co-authored-by: José Júnior <jose.junior@gmail.com>
Co-authored-by: a-chol <achol@notamail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Initial work for consolidation of board files and default ChibiOS configs.
* Migrate F401/F411 black pills for testing.
* Add early init bootloader jump flag.
* Add support for I2C in order to use i2c_scanner keymap.
* Add F401/F411 HSE bypass to get things booting.
* Exempt "hooked" ChibiOS conf files from updater script.
* Fix up ordering for bootloader_defs file check.
* Match previous $(KEYBOARD_PATHS) value for Proton-C, updated for all board configs.
* setup handwired pteron38
* Clean up readme
* readme follow template
* c formatting conventions
* remove file size comments from rules.mk
* use direct link to imgur image
* Apply suggestions from code review
* add license
* cleaning up
* got some working bones
* working pretty well
* really livin' now
* all done
* copyright adjustments
* default keymap
* readme
* no descrip
* remove trailing slashes
* remove blank line
* remove trailing slashes
* clean up readme
* clean up rules spacing
* bootloader spacing
* made quick json from KLE converter
* remove postageboard mini references
* add actual manu and product values
* add make example
* rework
* remove double bootload define
* smoller image
* liscensed
* correct dimensions
* dimensions
* Added handwired/selene based on handwired/106_with_trackpoint
* now at least parially working
* Selene Firmware 1, ready
* Updated Readme to align more with Template
* Added URL to info.json
* Fix status Lights being wired incorrectly
* Update keyboards/handwired/selene/config.h
* Update keyboards/handwired/selene/keymaps/Bpendragon/keymap.c
* Update keyboards/handwired/selene/selene.c
* Update keyboards/handwired/selene/selene.h
* Changes for PR requested by fauxpark
* Adds `default` keymap
* Renames `Bpendragon` to `bpendragon`
* Removes uneeded descriptors and options
* Simplifies return statement in `keymap.c`
* Removes trailing slashes from layout in `keymap.c`
* Updates `readme.mk` to reflect default keymap
* Aligns comments in `rules.mk`
* Forced folder name update to lowercase
* Apply suggestions from code review
* Added a new handwired 2x3,2x4,2x5 keyboard called the Stream_cheap
stream cheap is a diy version of the El Gato Stream deck minus the LCD keys
but you can always get relegendable keycaps to change the icon if you want
* added missing commas in info.json files
* update config to change pin definition
* changed keymap.c for 2x4
was trying to add macros and multi key commands to the keymap,
i added 2 ctrl commands that have more than one key i.e. ctrl-k-c (visual studio comment hot key)
and i added a test string to see how type out a string with the press of a button
* testing more changes to the keymap to the 2x5
* Update keyboards/handwired/stream_cheap/2x3/2x3.c
* Update keyboards/handwired/stream_cheap/2x3/config.h
* Update keyboards/handwired/stream_cheap/2x3/rules.mk
* Update keyboards/handwired/stream_cheap/2x5/config.h
* Update keyboards/handwired/stream_cheap/2x5/info.json
* Update keyboards/handwired/stream_cheap/2x3/config.h
* Update keyboards/handwired/stream_cheap/2x3/info.json
* Update keyboards/handwired/stream_cheap/2x4/config.h
* Update keyboards/handwired/stream_cheap/2x4/info.json
* Update keyboards/handwired/stream_cheap/2x4/keymaps/default/keymap.c
* Update keyboards/handwired/stream_cheap/2x5/info.json
* Update keyboards/handwired/stream_cheap/2x5/config.h
* Update keyboards/handwired/stream_cheap/2x5/rules.mk
* Update keyboards/handwired/stream_cheap/2x4/2x4.c
* Update keyboards/handwired/stream_cheap/2x4/config.h
* Update keyboards/handwired/stream_cheap/2x4/info.json
* Update keyboards/handwired/stream_cheap/2x5/2x5.c
* Update keyboards/handwired/stream_cheap/2x4/rules.mk
* removed file as per request of user zvecr
* removed line in rules.mk for 2x5
* Update keyboards/handwired/stream_cheap/2x5/keymaps/default/keymap.c
* Apply suggestions from code review
changes suggested in code review
* I2C_TIMEOUT is not defined on arm teensy
* Work round teensy having different ChibiOS config options
* Stash OLED conf files
* update comment
* update comment
* Remove stm32 alias to allow teensy alt mode
* adding via support for Dactyl Manuform 5x7
* Changing Vendor ID from FEED to 444D (DM)
* Update keyboards/handwired/dactyl_manuform/4x6/config.h
Fixing typo in Dactyl Manuform 4x6 Product Id
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/dactyl_manuform/4x5/config.h
Fixing typo in Dactyl Manuform 4x5 Product Id
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Roland Bernau <roland@bernau.dev>
Co-authored-by: Joel Challis <git@zvecr.com>
* Write firmware for the Ferris keyboard
Took inspiration from the gergoplex and the ergodox_ez firmware for the
split matrix with io_expander on the right hand.
Cleaned up a lot of bit fiddling on the mcu side by taking inspiration
from the `split_custom` in quantum.
Still bit fiddling on the mcp side as it is particularly natural to do
so with the abstractions provided by the i2c protocol. Would be good to
clean that up and abstract away the wiring from the generic i2c code in
a similar fashion as quantum and the mcp side behave.
One improvement over the ergodox_ez and the gergoplex firmwares is that
the wiring is straight forward as opposed to swapping rows and columns
in two different places that end up cancelling out for some reason.
At this stage, I have flashed this firmware to a board and have verified
that all keys are behaving as intended by shorting pins.
I still have to solder in some switches and test that everything works
correctly at normal typing speeds, but I don't expect any major issues
given I'm building up on previous effort, including the debouncing code
from the ergodox_ez.
* Remove rotation from info.json and label the keys as per default keymap
* Comply with minor review feedback points
* Use CUSTOM_MATRIX=lite to remove boilerplate
* Update keyboards/handwired/ferris/info.json
Didn't play nicely in the configurator
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove MIDI_ENABLE from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove FAUXCLICKY_ENABLE from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Prefer wait_ms over _delay_ms
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused includeh
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use dprint over print and remove include for print.h
* Remove all unused includes
* Remove unused code
* Cleanups thanks to code review
* Move more personal settings from the ferris config to the default keymap config
These setting happen to be unused in the default keymap at the moment,
as it has only one layer with no homerow modifiers and no mouse key; but
I would like to keep it there for two reasons:
* It can serve as an example to people creating their own keymap
* I plan to design a more usable default keymap that uses these features
once this PR which adds the Ferris keyboard is merged.
* Consolidate mcp logic inside matrix.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added Handwired Redragon Keyboard as well as default and via keymaps
* Update keyboards/handwired/boss566y/redragon_vara/info.json
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/redragon_vara.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/redragon_vara.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/handwired/boss566y/redragon_vara/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keymap.c
Removed defined keycodes from via keymap
* Update keymap.c
replaced defined keycodes in default keymap
* Update readme.md
Changed image to one that matches the physical keyboard
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Branch point for 2020 May 30 Breaking Change
* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)
* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)
* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)
* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)
* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)
* Convert V-USB usbdrv to a submodule (#8321)
* Unify Tap Hold functions and documentation (#8348)
* Changing board names to prevent confusion (#8412)
* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)
* Move spaceman keyboards (#8830)
* Migrate miscellaneous `fn_actions` entries (#8977)
* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)
* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)
* Refactor Lily58 to use split_common (#6260)
* Refactor zinc to use split_common (#7114)
* Add a message if bin/qmk doesn't work (#9000)
* Fix conflicting types for 'tfp_printf' (#8269)
* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)
* Refactor and updates to TKC1800 code (#8472)
* Switch to qmk forks for everything (#9019)
* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)
* Audio enable corrections (2/3) (#8903)
* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)
* Audio enable corrections (Part 4) (#8974)
* Fix typo from PR7114 (#9171)
* Augment future branch Changelogs (#8978)
* Revert "Branch point for 2020 May 30 Breaking Change"
* [Keyboard] Added D48 keyboard.
* Updated README.
* Cleanups.
* Moved d48 to handwired/
* Added link to build process album.
* Coding conventions cleanups.
* Added DS1307 RTC!
* Minor cleanups.
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Minor refactoring.
* Readme fix.
* Moved leftover keymap-specific code from keyboard space into keymap.
* Added encoder button pins to extra matrix row.
* Updated README, updated pinout & cleaned up the glcdfont
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update config.h
* Apply suggestions from code review
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Added default keymap. Refactored existing keymap.
* Update keyboards/handwired/d48/README.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
Co-Authored-By: Joel Challis <git@zvecr.com>
* Minor alignment fix.
* Update keyboards/handwired/d48/glcdfont_d48.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Changes as per PR.
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update to xealousbrown.
5-13ms Latency decrease, 4x scan rate improvement.
(CUSTOM_MATRIX = lite) is a really great feature!
* Updated Readme.md, added an extra speedhack.
* More optimizations
* Update keyboards/handwired/xealousbrown/rules.mk
* Update keyboards/handwired/xealousbrown/rules.mk
* Adding Novem keyboard (macropad) and demo layout
* Making changes suggested during pull request
* Removing keyboards/novem/keymaps/default/config.h as suggested during the pull request
* Moving keyboard to the handwired folder and changing the build line from readme in order to reflect this new location
* Add handwired BDN9-BLE
* Apply suggestions from code review
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/handwired/bdn9_ble/rules.mk
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/handwired/bdn9_ble/rules.mk
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update keyboards/handwired/bdn9_ble/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Set backlight and RGB pins for AVR onekeys
* Set pin for ADC as well
* Define ADC_PIN for F4 blackpills
* Use A0 for F4 ADCs
* Set ADC pins for F0 and F1
* Update switch to array to allow custom values
* Add adc keymap
* update docs to reflect alignment of default 10 bit
* start conversion to USE_ADCVn
* samplerate is hella wrong...stub out for now
* basic f1 and f4 functionality
* Tidy up current changes
* Restore old pinToMux function
* Add back sample rate for supported platforms
* F0 compile fixes
* wordsmithery
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Remove reference to avr only function
Co-authored-by: Ryan <fauxpark@gmail.com>
* adding Handwired Skeeb Keyboard
* Apply suggestions from fauxpark
* Apply more suggestions from fauxpark and small change to layout
* Apply more suggestions from noroadsleft and last tap dance
* to ease the maintenance for some boards ibnuda has.
* followed ridingqwerty's suggestion on 8821.
* folloing drashna's suggestion on qmk's 8221.
* following drashn's suggestion on qmk's 8211
* Add VIA support for Prime_L
* Update keyboards/primekb/prime_l/v1/config.h
* Add prime_exl_plus keyboard
* Temporary removal of prime_exl_plus
* Add Prime_EXL Plus, including VIA support
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/rules.mk
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keymap.c
* correct spacing of keymaps and layout macro. move indicator logic from user space to keyboard space
* further corrections to keymaps and layout macro.
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update prime_exl_plus.c
* small edit to prime_exl_plus.c
Clean up checks and logics that are unnecessary due to MILC updates.
Use pathlib instead of os.path for readability.
Use the 'pytest' keyboard for the tests.
Add community layout for 'handwired/onekey/pytest' so we can test
community layouts.
* correct indicator light states.
function of indicator lights was inverted. these changes correct that.
* flesh out keymaps pre production
* Enable extrakey in rules
* Prime_BLE initial commit
* Initial commit for Prime_L V2
* Update info.json
correct key spacing.
* update copyright
* Update readme.md
* Inital commit
* updates before PR into QMK master
* Drop Prime_EXL Plus from PR. Make requested changes to Prime_L V2
* Rename keyboards/primekb/Prime_l_v2/config.h to keyboards/primekb/prime_l_v2/config.h
* Rename keyboards/primekb/prime_l_v2/config.h to keyboards/primekb/Prime_l_v2/config.h
* remove directory Prime_l_v2
* re-submit with proper folder name.
* Ensure setPinInput actually sets input high-z
* Fixed _PIN_ADDRESS Macro arguments
as recommended by vomindoraan
* Fixed instances of setInput to use new behavour
* Changed kmac matrix to use input with pullups
* Update keyboards/gh60/revc/revc.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Fixed input state for unselect_rows
* fixed merge conflict
* Updated all instances of older uses of setPinInput()
* Fixed naming mistake
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Enforce definition of `DIODE_DIRECTION` for non-custom matrix boards
* Define diode direction for failing boards
* Matching parentheses
* Put onekey diode directions in top level config
* Add: RGB underglow support using SPI to SteamVan and CO60
* Update: Switch to QMK's baclight implementation for CO60 and SteamVan
* Fix: Remove now unnecessary backlighting code from keyboard files
* refactor keyboards using ST_STM32F072B_DISCOVERY to use 'MCU = STM32F072'
* refactor keyboards using GENERIC_STM32_F042X6 to use 'MCU = STM32F042'
* refactor keyboards using GENERIC_STM32_F103 to use 'MCU = STM32F103'
* VIA Refactor
* Remove old code
* review changes
* review changes
* Fix cannonkeys/satisfaction75/prototype:via build
* Add via.h to quantum.h
* Move backlight init to after backlight config load
* Merge branch 'master' into via_refactor_pr
* Update user's rules.mk to new way of enabling VIA
* Added id_switch_matrix_state
* Review changes
* Aranck now supports community MIT layouts, also minor optimisations done
* Update keyboards/handwired/aranck/keymaps/turkishish/readme.md
* Update keyboards/handwired/aranck/readme.md
* Initial commit for K-Nunmpad
* Changed layoutname
Corrected the files according to drashnas suggestions.
* Some names have been changed
* Some code thats not been used has been removed
* Fixed rules.mk
When adding the commnity layout, tapdancing broke. This was fixed with
rules.mk was changed in the k-numpad and karlssn keymap.
* Cleanup according fauxpark
Cleaned up the readme.md and the rules.mk according to feedback from
fauxpark.
* Set proper AVR part for USBasp avrdude flashing
* Remove `PROGRAM_CMD` stuff from rules.mk as they should not be needed anymore
* Missed the Plaid readme
* Remove PROGRAM_CMD from Mysterium
* Added my Dactyl Manuform layout
* Added my Dactyl Manuform layout
* finalized key layout, added reset code, no LED yet
* finalized key layout, added reset code, no LED yet
* enabled RGB backlight
* enabled RGB backlight
* enabled RGB backlight
* supporting split rgb
* supporting split rgb
* supporting split rgb
* added media controls
* allowing ctrl/command to fallthrough from mouse layer so we can ctrl scroll to zoom in/out
* addressed PR comments, and make a couple last minute adjustments to the layout, to add in the Forwards Delete keycode
* decreased brightness even more
* added cans12er keyboard
* updated readme
Updated the readme to conform with the provided template from the qmk_firmware githubpage
* Update keyboards/cans12er/README.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Changed configuration
Changed the configuration based on the Change Request from PR #7455 made by github user noroadsleft
* Remove keymap_config extern from default keymaps
* Revert unicode
Apparently VSCode does not like unicode, I didn't actually edit these lines, so it must have been automatic... :(
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Added new 2x5 Keypad with 3 LEDs to indicate the selected layer. By Jonathan Cameron.
* Minor refactor from suggestions from qmk team
* Added
* Moved to 'handwired' directory
* Update readme.md
* Update readme.md
* Update readme.md
* Update keyboards/handwired/2x5keypad/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Switch to image offsite
* Moved image offsite
* Update keyboards/handwired/2x5keypad/keymaps/default/keymap.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/handwired/2x5keypad/2x5keypad.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Moved functions into .c file per suggestions
* Cosmetic
* Fixed function called, per suggestions.
* Update keyboards/handwired/2x5keypad/2x5keypad.h
Ok
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Moved LED functions to the top level since they can be used it various flavors
* Declare those moved LED functions!
* Update keyboards/handwired/2x5keypad/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* First cut at French support
* Added French layer (green) for accented and special French characters
* Added french layer
* Fixed typo
* Updated to get more reasonable tap function
* Initial ARM bitbang ws2812 driver
* Unify chibios platform to run rgblight_task
* Remove 'avr only' comments from ws2812 docs
* Remove 'avr only' comments from ws2812 docs
* Unify chibios platform to run rgblight_task - review comments
* Remove debug flags from keymap
* Add comments from review
* Add defines for STM32L0XX
* Attempt to get arm ws2812 working on multiple gcc versions
* feat(slash): added slash keyboard
* fix(slash): fixed typo in readme
* Improvements after review
* disabled debug and print to reduce firmware size
* Fixes after review
* fixed hardware list in readme.md
* initial commit
* README
* Unique id
* info.json
* layotus
* br
* Move to handwired
* cleanup
* Disable command for fruity out of flash space
* Old compiler
turn off command
* Setup keymaps and userspace for Rishka
* Creates a keymap for Ergodox Ez, bdn9 and Dactyl Manuform 5x6
* Update bdn9 config with suggested change
* Add pragma to other header files
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Updates from review from fauxpark
* Updates from review
Swap to keyboard_post_init, layer_state_t and use layer state for encoder
* Updates from review
Swap to keyboard_post_init, layer_state_t and use layer state for encoder
* Add missing change from review
* Avoid NO_USB_STARTUP_CHECK - Disable USB as checks seem to enable it somehow
* Update quantum/split_common/split_util.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Also remove NO_USB_STARTUP_CHECK from vitamins_included/rev1
* [keymap] dactyl_left
Special layout for the left side of the ergodox dactyl.
* [keymap] dactyl_left
Special layout for the left side of the ergodox dactyl.
* Updated readme.md
* Update keyboards/handwired/dactyl_left/readme.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/handwired/dactyl_left/readme.md
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/handwired/dactyl_left/info.json
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/handwired/dactyl_left/info.json
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/handwired/dactyl_left/info.json
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Addressing changes for PR
removed layers.json and 15-24 from rules.mk
* Updating keymap for better a default
Hopefully this works as a starting point
* first commit, skeleton code, not sure if working
* Owlet 60 working firmware, json not sure
* use json from kle to qmk converter
* deleted temporary text from owlet60.h
* owlet60 working oled and led firmware
* moved owlet60 to handwired
* updated readme.md
* Revert "owlet60 working oled and led firmware"
This reverts commit 27f9465aab.
* Revert "moved owlet60 to handwired"
This reverts commit 9b8e8344fc.
* revert changes, moved owlet60 to handwired, updated copyright blurb
* fixed readme.md
* removed duplicate items
* resolve merge artifact
* Update keyboards/handwired/owlet60/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* check out merge artifacts with qmk master
* Update keyboards/handwired/owlet60/matrix.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/handwired/owlet60/matrix.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/handwired/owlet60/matrix.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/handwired/owlet60/matrix.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* removed redundant rule on oled_testing/rules.mk, refactored mux switching code on matrix.c
* Added new 2x5 Keypad with 3 LEDs to indicate the selected layer. By Jonathan Cameron.
* Minor refactor from suggestions from qmk team
* Added
* Moved to 'handwired' directory
* Update readme.md
* Update readme.md
* Update readme.md
* Update keyboards/handwired/2x5keypad/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Switch to image offsite
* Moved image offsite
* Update keyboards/handwired/2x5keypad/keymaps/default/keymap.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/handwired/2x5keypad/2x5keypad.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Moved functions into .c file per suggestions
* Cosmetic
* Fixed function called, per suggestions.
* Update keyboards/handwired/2x5keypad/2x5keypad.h
Ok
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Moved LED functions to the top level since they can be used it various flavors
* Declare those moved LED functions!
* Update keyboards/handwired/2x5keypad/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Remove superfluous JTAG disable code
* 32A has differently named register
* Accidentally some operators
* 32A also has different JTAG pins
* Wrap disable_jtag() in an ifndef
* Document this new define
* Rename the define, it conflicts with a LUFA thing
Also, move the ifndef wrapping to the call in keyboard_setup()
* Refactor splittest to support multiple dev boards
* Refactor splittest to support multiple dev boards - revert change to number of RGB led
* Refactor splittest to support multiple dev boards - update docs
* Refactor splittest to support multiple dev boards - correct docs
* Refactor splittest to support multiple dev boards - update teensy master logic
* Remove the need to set NUM_OF_ENCODERS
Instead, calculate the size of the array, and use that instead
* Add hack for split common support
* Remove NUM_OF_ENCODERS from keyboard config
Can be reverted, if needed
* added handwired keyboard wulkan
* added info.json for qmk configurator
* fixed spelling
* enum dont need to be assigned to zero
* removed cflag from readme
* updated rules.mk
* removed unneeded rows from config
* moved unicode to keymap conf
* fix adjust layer and comments for keymap
* Initial refactor of onekey to support multiple development boards
* Fixes to get teensy lc && 3.2 working
* Add pin tables
* Add caveats to Teensy boards
* Correct bootloader for Elite-C
* added keyboard_layout_jopr
* making it compile
* #pragma once instead of #ifndef and #define
* renamed and added keymap
renamed old "default" to "modded_white", added new "default" that resembles an ISO 105-key layout
* reordered keyboards/jopr/info.json to match order o layout array
* implemented most suggestions
* fixed missing ;
* fixed bootloader setting for rules.mk
* adopted standard layout matrix naming convention
* "fixed" commented-out code in keymaps
* changes to keymap layers and LEDs
Turns out adding a layer for ROYA-modified keycodes is more trouble than it's worth and works better by just defining a ROYA key.
Also, LEDs were set up incorrectly.
Lastly, implemented SysReq-Warning LED.
* moved forced NumLock code
just in case either it or the CapsLock & ScrlLock update code wouldn't both work otherwise
* rearranged media keycodes
* replaced Shifted keycodes with basic ones
* Apply suggestions from code review
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* implemented suggestions by noroadsleft
* Apply suggestions from code review
Make ISO-Enter QMK Configurator-friendly
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Update readme.md
* Update keyboards/jopr/info.json
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* moved keyboard to handwired folder
It was said that personal passion projects belong in there, even if they're not actually handwired
* Update readme.md
* Update code for compatibility with latest QMK
* Added compatibility with Planck rev6
* use wait_ms instead of _delay_ms
* removed unnecessary rules
* disable audio on rev4 only
* Start to standardize macro timer
* Update Fractal layout
Specifically, limit the RGB Lighting, since it's too many for the power, and only have the KITT annimation on the front
* Update Iris keymap to use I2C for transport
* Remove TAP_CODE_DELAY from keyboard in favor of global setting
* Remove Woodpad
Since it\'s no longer in my possession
* Only enable LTO on AVR boards
* Run matrix_scans while doing startup light
* Run matrix_scan to get split keyboard code synced properly
* Fix rgb mode
* Remove custom debouncing settings
* Make RGB Light Startup Animation optional
* Fix opt def
* Remove extra tap code delay value
* Fix references to keebio boards
* Add support for LP Iris keyboard
* Add backlight code
* Make startup animation optional
* Update gitlab ci script
* Remove port declaration
* Revert avrgcc changes to gitlab ci file
* Don't re-set mods
* Remove MACRO_TIMER define
* Add custom name for crkbd
* Add name for Prime M pad
* Add names for ortho 4x12 boards
* Add some additional handling for rgb init
* Change thumb clusters on ergodox
* Switch Orthodox to I2C
* Fix Space in ergodox keymap
* Use OSL for ergodox layout
* Ugh, can't find a good layout
* Fix typo
* Fix up animation startup
* Cries in AVR
* Fix makefiles for ergodox ez boards
* Add support for "secret songs" in my userspace
* Reset debounce to 5ms for Ergodox EZ
* Fix gitlab CI yaml file
* More crying in AVR
* Cannot use rgb light and rgb matrix at the same time due to the WS2812 rgb matrix PR until the "Coexistance" PR is merged
* Update ODox for split common and i2c
* Add split config
* Impement Split code
* Add support for xscorpion OLED code
* Add OLED display config
* Fix OLED screen font
* Get OLED set up in vertical mode
* Remove old OLED code
* add per key support for crkbd
* Fix split changes
* RGB Tweeaks
* More OLED tweaks
* Fix rotation stuff
* Fix more OLED stuff
* Remove custom Debounce from Ergodox layout since it's no longer needed
* Added first configuration for handwired hacked motosped keyboard
* Added first keymap
* Fixed h file key layout
* Swapped Y and Z in default keymap
* Added name, email and description
* Moved hacked motospeed keyboard to handwired
* Changed make command in readme
* Formatted readme to be displayed properly with markdown
* Formatted keymap and layout to better reflect the physical keyboard
* Fixed info.json
* Update keyboards/handwired/hacked_motospeed/info.json
Co-Authored-By: Deckweiss <Deckweiss75@gmail.com>
* Removed .directory from .gitignore
Co-Authored-By: Deckweiss <Deckweiss75@gmail.com>
* Minor changes and cleanup
* Update keyboards/handwired/hacked_motospeed/hacked_motospeed.h
Added back newline needed for properly parsing
Co-Authored-By: Deckweiss <Deckweiss75@gmail.com>
* Add tennie
* Jacobs Functions
* Switch back to normal layout
* Remove define from old template
* Fix broken keymaps
* Correct style errors, add bootlite
* Update readmes. Rename test keymap
* Missed comma
* Switch rgb from init to post init
* Fixed typo of 'confid.h' to 'config.h'
* Fixed broken links in docs
* Fixed a lot of dead links
* Removed all dead links that I could not find a replacement for
* Placed knops links back in
* Fixed plank keymaps so that they will compile for planck light
* Https doesn't work on knops.io
* tv44:budi now compiles
* s60_x:amnesia0287 now compiles
* Fixed allocation of key_combos so that narze keymap for planck can compile correctly
* Disabled rgb on ergodone and infinity
* Enabled tap dance so it compiles
* Added return statement so it compiles
* If compiling on light disable extra functionality
* Properly redefined variable so it compiles
* Remove remaining dead links
* handwired/magicforce61: refactor
Renamed layout macro KEYMAP to LAYOUT.
Keymap now uses #include QMK_KEYBOARD_H.
Refactored the default keymap to use non-auto-prepended keycodes per QMK standard.
Deleted deprecated action_get_macro block (was unused).
* handwired/magicforce61: Configurator support
* handwired/magicforce61: readme cleanup
Restructured the readme to be more similar to current QMK template.
* handwired/magicforce61: replace missing image in readme
Replaced the missing wiring image (error 404) with a table.
* handwired/magicforce61: rename readme to lowercase
* Convert config.h to #pragma once include guard
* 412_64 move to handwired
412_64 and its second printing, Mark Zero Stand Aside, are now obsolesced by new hardware. As only two units exist in the wild not owned by me, I'm moving the definition to handwired.
* Mark 3 Stand Aside ready for production.
Uploading firmware, compiled and tested, for Mark 3 Stand Aside. The hardware's ready, now the software is too.
* Whoops.
Should've branched before pushing Stand Aside. Sorry 'bout that.
* Revert "Whoops."
This reverts commit d222046cfe.
* Revert "Mark 3 Stand Aside ready for production."
This reverts commit c790899af7.
* Tidy up 5x6.h
- replaced tabs with spaces (QMK convention)
- aligned layout macro visually
* Fix Configurator support for Dactyl Manuform 5x6
- layout macro had the wrong name in info.json
* Tidy up 5x7.h
- replaced tabs with spaces (QMK convention)
- aligned layout macro visually
* Fix Configurator support for Dactyl Manuform 5x7
- corrected keyboard height
- layout macro had the wrong name in info.json
* Tidy up 6x6.h
- replaced tabs with spaces (QMK convention)
- aligned layout macro visually
* Fix Configurator support for Dactyl Manuform 6x6
- layout macro had the wrong name in info.json
* Added xeal60 via clone of lets split
* Delete removed other keymaps
* Basic keymap (no FN). Compiles.
* Removed NP_STAR and NP_SLSH.
* Removed "debounce_algo = manual" in all keyboards with CUSTOM_MATRIX = yes.
* Changed order of rules in TMK. Documented feature.
* Fixed missing whitespace in debounce documentation
Table wasn't working due to missing newline.
* Added bold in a few areas.
* DO NOT USE - Removed debounce from TMK.
* Remove accidental xeal60 commit
* DO NOT USE - debounce successfully compiled.
* DO NOT USE Revert back to original API to support split_keyboards.
* Working eager_pk
* Whitespace cleanup.
* Restored debounce.h since there wasnt any real change.
* Moved debouncing_time variable to inside #if debounce
* Removed check for custom_matrix. We can safely include the debounce file for compilation when custom_matrix is used.
* Removed #include "matrix.h" from debounce.h
* Bug fix - was using MATRIX_ROWS instead of num_rows
* Fixed compilation error with debounce_sym_g
* Renamed DEBOUNCE_ALGO to DEBOUNCE_TYPE
* Malloc array in debounce_eager_pk, since split keyboards only use MATRIX_ROWS/2.
* Fix compile error in debounce_eager_pk
* Stricter, leaner DEBOUNCE_TYPE section in common_features.mk. Cleanup debounce_type.mk
* Migrate fn_actions for default keymaps
* Rename the Grave/Escape Shift masks
* No need for shift_esc_shift_mask
* Change breaks to return false
* Right align pointers
* Add default case
* Separate cases with empty lines
* Add stm32f072 base ck4x4 to handwired
* add prints
* Save these tries
* Save changes again
* Working hadron oled
* OLEd working but ws2812b still iffy:
* save another try
* Encoder feature + OLED
* RTC code
* Implement clock setting mode
* Whitespace
* Encoder hooked up to working LED PWM code
* Add missing files
* eeprom changes
* Save changes
* Move i2c master
* Move satisfaction75 under cannonkeys
* Set proper default folder
* Revert some core changes
* Undo paved iris changes
* Reorganize code for maintainability and prep for new features
* Add starting code for clock OLED mode
* Clock set mode finished
* Add custom encoder modes
* Actually add VIA keymap
* Gate to only 072
* fix gate for only 072
* Update header guards and includes
* Update i2c selection strategy
* Update board.c to handle software reset to DFU
* Move boards to cannonkeys and share resources
* Share common files between cannonkey boards
* Fix ortho60 keymap
* update LED numbers
* Add RGB keys to Ortho60 and Ortho48
* Add Backlight control to default layout Ortho60 and 48
* Remove unnecessary ws2812.c SRC from rules.mk
* handwired/space_oddity: refactor
- config.h: updated to use #pragma once include guard
- rules.mk: replace `?=` with `=`
- space_oddity.h:
- updated to use #pragma once include guard
- layout macro KEYMAP renamed to LAYOUT
- default keymap:
- updated to use #include QMK_KEYBOARD_H
- replace references to Planck keycodes
- replace fn_actions-powered layer switch keycode
- rebuild keymap block comments
- keymap layers now use short-form keycodes
- refactor action_get_macro keycodes into process_record_user
* handwired/space_oddity: Configurator support
* handwired/space_oddity: readme cleanup
- update readme to better conform with QMK template
- fixed the make command.
* Added xealousbrown keyboard.
* Changed to pragma once in config.h
* Update keyboards/handwired/xealousbrown/rules.mk
Added bootloader.
Co-Authored-By: alex-ong <the.onga@gmail.com>
* Update keyboards/handwired/xealousbrown/config.h
Commented out IS_COMMAND() since it is already default value.
Co-Authored-By: alex-ong <the.onga@gmail.com>
* Remove unnecessary IS_COMMAND definition in clueboard/66/rev4
* Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions
* Update docs to use get_mods() instead of keyboard_report->mods
* Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test
For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist
* Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt)
* Add default value for IS_COMMAND for COMMAND feature
* Cleanup and consistency
* Update Templates to reflect change
* Fix IS_COMMAND in template
* Fix IS_COMMAND define
* Use consistent IS_COMMAND block in templates
* Remove unnecessary `#undef IS_COMMAND` directives
* Fix compile issue on orthodox
* Reomve IS_COMMAND option for newer boards
* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting
* Remove a couple of additional IS_COMMAND defines
* Remove remaining redundant IS_COMMAND definitions
* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin
* Remove multiple empty lines in modified config.h files
* Update additional boards
* Reomve IS_COMMAND from newer boards
* Update Alice keyboard
* Remove IS_COMMAND from additional boards
Jan 24th edition
I worked on those keymap to simplify the use of 60% keyboards for
coders. Instead of trying to mimic planck, this keymap remove
raise/lower layer complexity and keep some important sign keys for coder
in the upper right side pretty much the same way as they are on a full
keyboard.
A karabiner configuration is also provided to mimic most of the keymap
features on the macbook internal keyboard for when you are forced to use
it.
* handwired/retro_refit: refactor
- retro_refit.h
- updated to use #pragma once include guard
- refactored layout macro to not auto-prepend KC_ to keycodes
- renamed to LAYOUT (from KEYMAP)
- aligned for readability
- default keymap.c
- now uses #include QMK_KEYBOARD_H
- removed unused fn_actions and action_get_macro blocks
* handwired/retro_refit: Configurator support
* handwired/retro_refit: readme update
Updated readme to format of current QMK template.
* handwired/reddot: refactor
- reddot.h
- updated to use #pragma once include guard
- renamed layout macro KEYMAP to LAYOUT
- refactored arguments to more closely resemble physical layout
- aligned for readability
- keymaps/default/keymap.c
- now uses #include QMK_KEYBOARD_H
- updated include path for keymap_french.h
- refactored to use short keycodes
- aligned for readability
* handwired/reddot: Configurator support
* handwired/reddot: readme update
- update readme to current QMK template
- add KLE permalink to my best guess at the layout
* handwired/qc60: refactor and Configurator update
- correct layout macro name (LAYOUT_ANSI_DEFAULT to LAYOUT_ansi_default)
- add layout data for remaining layout macros
- correct ISO layout macros (neither had a split left Shift)
- refactor LAYOUT_iso_alt (place KC_NUHS key on home row; consistent with LAYOUT_iso_default)
- proto.h refactored to use #pragma once include guard
* handwired/qc60: keymap refactor
- delete redundant KC_TRNS and KC_NO aliases
* handwired/qc60: readme update
- update header (made consistent with QMK template)
- update Docs links (Newbs Guide; grammar)
* handwired/ortho60: Configurator update
- correct labels for Up and Right keys
- add layout data for LAYOUT_1x2uC
* handwired/ortho60: readme update
- update readme file to use QMK template
* handwired/ortho60: deleted DEFAULT_FOLDER rule
Not needed as the keyboard currently has no revisions.
Discovered the LAYOUT_compact macro didn't compile in QMK Configurator. Realized the reason for that was that it automatically prepends `KC_` to every keycode received.
Renamed the macro to LAYOUT_kc so Configurator will ignore it.
Also changed the file to use the #pragma once include guard because I was in here anyway.
* Eliminate separate slave loop
Both master and slave run the standard keyboard_task main loop now.
* Refactor i2c/serial specific code
Simplify some of the preprocessor mess by using common function names.
* Fix missing #endif
* Move direct pin mapping support from miniaxe to split_common
For boards with more pins than sense--sorry, switches.
* Reordering and reformatting only
* Don't run matrix_scan_quantum on slave side
* Clean up the offset/slaveOffset calculations
* Cut undebounced matrix size in half
* Refactor debouncing
* Minor fixups
* Split split_common transport and debounce code into their own files
Can now be replaced with custom versions per keyboard using
CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes
* Refactor debounce for non-split keyboards too
* Update handwired/xealous to build using new split_common
* Fix debounce breaking basic test
* Dodgy method to allow a split kb to only include one of i2c/serial
SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only
that driver code in the binary.
SPLIT_TRANSPORT = custom (or anything else) will include neither, the
keyboard must supply it's own code
if SPLIT_TRANSPORT is not defined then the original behaviour (include
both avr i2c and serial code) is maintained.
This could be better but it would require explicitly updating all the
existing split keyboards.
* Enable LTO to get lets_split/sockets under the line
* Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE
* Remove avr-specific sei() from split matrix_setup
Not needed now that slave doesn't have a separate main loop.
Both sides (on avr) call sei() in lufa's main() after exiting
keyboard_setup().
* Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT.
* Add comments and fix formatting.
* Downbubble: Configurator fix
Fix the visual key alignment and some typos.
* Downbubble: refactor
Rename layout macros:
- LAYOUT_downbubble_standard to LAYOUT_standard
- LAYOUT_downbubble_splitbackspace to LAYOUT_split_bs
- LAYOUT_downbubble_splitrightshift to LAYOUT_split_rshift
- LAYOUT_downbubble_splitnumpad to LAYOUT_split_numpad
- LAYOUT_downbubble_spliteverything to LAYOUT_all
* Numbrero: fix Configurator mismatch
Key object order in info.json didn't match the layout macro, leading to keys being assigned out-of-sequence.
* Numbrero: tidy
- white space changes in numbrero.h (alignment/readability/QMK conventions)
- minor changes to readme.md (grammar, mostly)
* Tradestation: tidy code
- correct JSON syntax on info.json
- visual key alignment on info.json
- white space changes on rules.mk and tradestation.h (readability/QMK conventions)
* Tradestation: readme refactor
Modify readme.md to more closely match QMK template.
* Tradestation: readme update
Update The Board podcast link for libsyn.
* Remove QUANTUM_DIR code blocks from keyboard rules
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect entire keyboards.
* remove QUANTUM_DIR code blocks from rules for default keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect default keymaps.
* remove QUANTUM_DIR code blocks from rules for user keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect "user" keymaps. (It's actually any keymap
that isn't named `default`.)
* remove QUANTUM_DIR code blocks from rules for community layouts
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for community layouts.
* remove QUANTUM_DIR code blocks from rules for userspaces
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for userspaces.
* Use standard KC_ALGR, remove language-specific redefinitions
* Use ALGR instead of ALTGR in BÉPO and Canadian multilingual keymaps
* Remove BE_LALT, BE_LGUI aliases
* Adding ortho60 to handwired
* update to use LAYOUT_ortho_5x12
* Address PR comments about layout macros
* Add default layout to info.json for configurator
* Hack to xyverz layout until RGB branch is merged
* Fix undef RGBDIPIN in xyverz 12x5 layout
* Revert change to xvyerz's layout
* Fix typo
* Fix order
* Revert xyverz rules.mk
* handwired/CMD60: refactor
- renamed layout macro KEYMAP to LAYOUT
- removed K2C, K3B and K3C locations (indications are these locations were unused in hardware)
- keymap
- now uses #include QMK_KEYBOARD_H
- converted keycodes to short format
- deleted TMK fn_actions and action_get_macro blocks
- white space changes (readability/alignment)
* handwired/CMD60: Configurator support
* handwired/CMD60: readme update
- updated to conform to current QMK template
- added image and build gallery links
* handwired/cmd60: rename all files and folders to lowercase
* handwired/maartenwut: readme cleanup
- Fixed typo (Maarten's last name was misspelled)
- Updated Docs links
* handwired/maartenwut: Configurator support
* Add standard ALGR defition, remove (re)definitions from language files
* Use ALGR(kc) consistently in ALTGR(kc) aliases
* Non-Nordic keymaps should not use NO_ALGR
* Add standard KC_ALGR definition
* Update docs with ALGR and KC_ALGR
* Update SS_ALGR and ALGR_T aliases
* handwired/numpad20: refactor
- layout macro no longer auto-prepends keycodes with KC_
- keymaps for this keyboard will now compile in QMK Configurator
- keymap now uses #include QMK_KEYBOARD_H
- deleted unused fn_actions code block
* handwired/numpad20: Configurator support
* handwired/practice60: Configurator Support
* handwired/practice60: refactor
- layout macro rows did not have an equal number of arguments in all rows of the matrix
- white space changes for readability/alignment
* handwired/pilcrow: refactor
- layout macro renamed from KEYMAP to LAYOUT
- keymap now uses #include QMK_KEYBOARD_H
- layers reformatted for readability
- removed unused and deprecated fn_actions and action_get_macro blocks
- keymap config.h
- updated to use #pragma once
- removed redundant config.h include
* handwired/pilcrow: Configurator support
* handwired/pilcrow: readme update
Updated readme.md file to use modern template formatting.
* handwired/minorca: refactor
- Refactored keymaps to use a layout macro, which was added to minorca.h.
- keymaps now use QMK_KEYBOARD_H include
- removed redundant KC_TRNS and KC_NO definitions
- rgb keymap refactor to use QMK core layer switching and Mod-Tap keycodes
* handwired/minorca: Configurator support
* handwired/minorca: readme cleanup
Restructure readme file to current QMK template.
* handwired/gamenum: refactor
- layout macro KEYMAP renamed to LAYOUT
- white space changes for alignment
- default keymap
- now uses #include QMK_KEYBOARD_H
- updated layout macro names
- white space changes (for readability)
* handwired/gamenum: Configurator support
* handwired/gamenum: readme cleanup
- renamed file to lowercase
- updated to match current QMK template more closely
- edits to reflect the other changes in this PR
* handwired/fivethirteen: refactor
- Layout macro KEYMAP renamed to LAYOUT
- Default keymap
- now uses #include QMK_KEYBOARD_H
- Removed redundant KC_TRNS definition
- Removed deprecated fn_actions and action_get_macro functions.
* handwired/fivethirteen: Configurator support
* handwired/fivethirteen: readme cleanup
Restructured readme file to be closer to current QMK template.
Couldn't find a photo of an assembled fivethirteen, so deleted the
reference to the photograph.
Renamed to readme.md
* handwired/dactyl_manuform/4x5: Configurator support
* handwired/dactyl_manuform/4x6: Configurator support
* handwired/dactyl_manuform/5x6: Configurator support
* handwired/dactyl_manuform/5x7: Configurator support
* handwired/dactyl_manuform/6x6: Configurator support
* handwired/atreus50: refactor
- layout macro renames:
- KEYMAP is now LAYOUT
- COMPACT_KEYMAP is now LAYOUT_kc
- keymap updates:
- both keymaps now use #include QMK_KEYBOARD_H
- removed redundant KC_TRNS and KC_NO definitions
- default keymap now uses LAYOUT macro instead of LAYOUT_kc
* handwired/atreus50: readme cleanup
Reformatted the readme to be more closely aligned to current QMK
template, and fixed some typos/grammar.
* handwired/atreus50: Configurator support
* handwired/promethium: refactor
- config.h files
- updated to use #pragma once
- removed redundant config.h includes
- layout macro moved from config.h to promethium.h
- layout macro renamed from KEYMAP_CUSTOM to LAYOUT
* handwired/promethium: Configurator support
* handwired/arrow_pad: layout macro and keymap refactor
- Layout macros moved from the keymaps to arrow_pad.h.
- LAYOUT_pad21 refactored to only accept keys that are physical present (no KC_NO entries required in keymap)
- Keymaps now use #include QMK_KEYBOARD_H
- Keymaps refactored to use process_record_user function (from action_get_macro)
* handwired/arrow_pad: Readme cleanup
Fixed the make commands and updated the layout macro.
* handwired/arrow_pad: Configurator support
* Include both base keyboards
* Merge the keymap
* Merge the configs
* Add wiring diagram for clarity of documentation
* Merge rules
* Merge keyboard sources
* Change names to compile
* Update documentation to suit
* Add qwerty layout to 108keyTrackpoint
* Separate the dvorak standard layout from a media focused one
* Update documentation to reflect new keymaps
* [style] Add empty lines at ends of files
* [style] Meet current QMK style guide
* Bring READEME closer to the QMK template
* [style] Change all "108keyTrackpoint" to "108key_trackpoint"
* [style] Use "LAYOUT" instead of "KEYMAP"
QMK terminology has changed
Co-Authored-By: mkem114 <20897849+mkem114@users.noreply.github.com>
* Add two spaces after maintainer in README
This is required to render properly
Co-Authored-By: mkem114 <20897849+mkem114@users.noreply.github.com>
* Remove redundant line
"PREVENT_STUCK_MODIFIERS" is default on for QMK
Co-Authored-By: mkem114 <20897849+mkem114@users.noreply.github.com>
* Change include of keymaps to use QMK_KEYBOARD_H
This includes automatically
* Update make rules to match template
* Change from KC_MENU to KC_APP
The button functionality actually wanted is the context menu key
* [style] Change "dvorakMedia" to "dvorak_media"
* Update README to reflect minor changes
* Starting point for blue pill based practice60
* Changes
* add
* try raw bin no botloader
* swap back to bootloader version
* edit
* Remove debug LED flash
* Disable JTAG to open up B3 and B4
* Add led backlight support (no breathing yet)
* Update matrix for correctness
* RGB Underglow working in a very simple state
* not as bright
* Move to handwired
* revert ChibiOS_Test changes
* Changes based on PR comments
* Address PR comments v2
* Move files
* Main folder
Main folder with some changes like the base layout and matrix for uploading in a future to the qmk repositorie
* First Commit
Firsts non previously commited changes:
-Changed to keyboards/handwired
-Basic credit to Xydane
-70% Layout
* Modified file structure for several keyboards
As I don't want to create several folders and overcrowd the main folders I made a few modifications to being able of configure several keyboards as revisions of the main keyboard.
Added a second variant.
Compiling tests went right but I haven't tried it on the controller.
* Starting leds
* Started dual color leds PWM functions and configs
I started to create the PWM functions and configs based on internet examples, it doesn't compile yet
* Backtraced a bit to establish and try debug before continuing the pwm
Just this, algo some doc as a new pinout image, space cadet modification to try if it works and little more
* Deleted unuseful stuff
After trying the reestructure to being compatible with several keyboards and that it worked I deleted the other keyboard.
Added space cadet shift to ISO.
Finally I couldn't debug everything and I'm getting quite frustrated to continue much more than just adding pwm leds
* Changed again Iso fix for Space Cadet
* Renamed keyboard, future pull
I just renamed the keyboard and made some simplifying changes in order to make a pull request sometime soon.
I'm too frustrated, tired and knowledge limited to achive using the PWM for leds, I didn't even get to use the debug mode...
I intend to end basic led color change using layers (if I can), document everything properly and make a pull request so other users can continue/use this project.
* Writed Readme.md file
I also corrected a previous compilation problem and ordered a bit the keymaps
* Corrected readme
* Try to add layer activated light
* Revert "Try to add layer activated light"
This reverts commit 205af820d8.
* Progress to fork
Coming back to work, upcoming pull
* Linked image
Corrected readme
* Some cleanning
Added images to readme, som cleaning, burning after commit.
* Almost finished (working)
Finally
* Finished bluepill firmware
Just finished and tried layer dependant led colors. Going for merge
* Deleted innecesary stuff and trailing spaces
Just as commit title said.
* Coding conventions
Just modified some files to respect coding conventions
* Deleted XXXXXX define
Checking some other PR seen this improvement
* Changes suggested on PR
Firs doing the easy changes
* More changes for the PR
-I also deleted one unused function for led toggling on matrix.c (Now it uses layer dependent baklight, algo on of on start)
-Deleted commented function on keymaps.
Right now only needs testing and all pragma replaces.
* Almost every pragma change on PR
That's almost finished, only waiting for reply due to compiling errors
* Revert "Almost every pragma change on PR"
This reverts commit 07f23aa862.
* Revert last commit
I moddified by mistake a file from another keyboard
* Solved last pragma
Compiles fine.
Now I only need to test it, I say you if it works to include it in the main repository.
* Added pteron files made via from kbfirmware.com.
* Added readme.
* Made some progress on Pteron keymap.
* More keymap.
* Updated bootloader, added some keymap illustrations.
* Moved default keymap to FSund, made default keymap from default preonic keymap.
* Fixed typo in default pteron keymap.
* Made changes recommended by drashna.
* handwired/ibm122m: refactor
Refactored layout macro and keymaps to more closely resemble the keyboard's physical layout.
* handwired/ibm122m: add Configurator support
* initial commit
* Update readme.md
* Update keymap.c
added comment for description of function to control LED as layer indicator
* corrected formatting as requested.
* format for configurator
* corrected info.json to propertly reflect layout in Configurator
* updated layouts to reflect physical keyboard
* Remove chording as it is not documented, not used, and needs work.
* Make Leader Key an optional feature.
* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`
* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* Add keyboard information and separated my custom layout from the default
* Add readme to Lukaus' Ergodox EZ keymap
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* Add keyboard information and separated my custom layout from the default
* Add readme to Lukaus' Ergodox EZ keymap
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* Fix merge conflict again?
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* Add keyboard information and separated my custom layout from the default
* Add readme to Lukaus' Ergodox EZ keymap
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* added my lukaus keymap (programmers dvorak with QWERTY, function, and mouse/keypad layers)
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* updated ergodox_ez keymap and initial commit for IBM Model M 122 key
* Add keyboard information and separated my custom layout from the default
* update keymap
* Update rules.mk to remove redundant commented line
* Fix missing key on default layout for IBM Model M 122 key
* Fix issues identified by drashna and noroadsleft
* Update readme for IBM 122 key
* Keyboard: HandWired/XeaL60
* Updated rules.mk
* Mapping for layout was flipped
* Figured out how to re-map bad pins.
* Updated Keymap
* Enabled audio, Forced NKRO
* Added QMK_KEYS_PER_SCAN
* Removed more unnecessary files, since split_keyboards are in main QMK branch already.
* Simplified rules.mk in rev1
* Removed i2c from matrix.c
* Re-formatted to 4 spaces per tab,
* Changed note for NUMPAD
* Added I2C support back!
* Fixed keyboard mappings. Both sides work
* Moved i2c configuration from keymaps/default/config.h to config.h
* Changed SCL_CLOCK to 400000L
* Added DEBUG_MATRIX_SCAN_RATE for future optimization efforts
* Removed row2col code to clean up matrix.c
* Scan rate from 2100 -> 4200 by using Nop instead of waiting 30us between columns.
* Further optimized column reading via optimized_col_reader.
* Immediate key-recognition
* Switched back to own implementation of SPLIT_KEYBOARD. Will optimize so that slave interrupts master.
* Moved scanrate debug messages to another file.
* Made matrix_scanrate.c compile if CONSOLE_ENABLE is off. Updated to latest i2c.c
* Latest i2c uses a few bytes for lighting information
* Optimizations in i2c.h to determine buffer size.
* Disabled a whole bunch of features. TODO: Test that keyboard still works fine.
* Minimum #define NO_ACTION's with still working keyboard
* Fixed matrix not working due to offsets not being respected
* Added numlock button for keymap.
* Use I2C_KEYMAP_START offset
* Removed serial, Backlight and RGB support
* Removed need for split_flags.
* Added audio on and off for numlock.
* Renamed from xeal60 to xealous, simplified build system.
* Used more shared split_common code.
* Updated audio code.
* moved tone_qwerty and tone_numpad to config.h. Removed keymaps/default/config.h
* Added more shortcut keys in _FN layer. Increased debounce to 6ms due to fencepost error.
* DF used with incorrect argument. Custom_keycodes no longer required.
* Fixed bug in update_debounce_counters which was resulting in no debouncing!
* Removed unnecessary #include
This small change prevents an unused variable from being initialized, throwing a warning during compilation, thus ending fatally.
[07:47:10] [Daniels-MacBook-Pro-3] [dburkhol] [ /Users/dburkhol/git/qmk_firmware ] [develop ]
: make handwired/dactyl:default
QMK Firmware 0.6.97
Making handwired/dactyl with keymap default
avr-gcc (GCC) 7.3.0
Copyright (C) 2017 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Size before:
text data bss dec hex filename
0 19972 0 19972 4e04 .build/handwired_dactyl_default.hex
Compiling: keyboards/handwired/dactyl/twimaster.c [OK]
Compiling: keyboards/handwired/dactyl/matrix.c keyboards/handwired/dactyl/matrix.c:52:22: error: 'expander_col_pins' defined but not used [-Werror=unused-const-variable=]
static const uint8_t expander_col_pins[MATRIX_COLS] = MATRIX_EXPANDER_COL_PINS;
^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
[ERRORS]
|
|
|
make[1]: *** [.build/obj_handwired_dactyl_default/matrix.o] Error 1
make: *** [handwired/dactyl:default] Error 1
Make finished with errors
* Added initial files for QC60 prototype
* renamed all 'keymap' to 'layout'
* renamed layout macros to suggested naming convention of LAYOUT_macro_description
* replaced boilerplate
* removed rules.mk from keymap folders
* replaced 'qc60/rev1' with 'qc60/proto'
* replaced more boilerplate
* renamed DEFAULT_FOLDER to point at the correct folder
* updated readme
* slight tweaks to xd75 keymap
* update to config.h to remove undef of solenoid active
* code organization for userspace
* updates to userspace and keymaps
* add rgb to userspace and lets split
* add conditional around rgb functions in userpsace
* move rgb layer changes into layer_state_set_user
* DactylManuform: Updating dvorak keymap
* Changed NAV and NUM layers to LOWER and RAISE
* Removed Mod+Key form RAISE and LOWER keys to be used as layer togglers exclusively
* Added missing keys to LOWER layers
* DactylManuform: fixed bugs in keyboard config file
* DactylManuform: Change default mouse config
The default mouse config parameters are slow and not very user friendly, this commit overrides the default
values.
wq
Signed-off-by: Sameeh Jubran <sameeh.j@gmail.com>
* Dactylmanuform: Update default keymap (qwerty) to match dvorak's
Recently devorak's layout went through some changes for changing layer toggles behavior,
adding missing keys, and fix minor bugs, this commit introduces these changes to the default keymap.
Signed-off-by: Sameeh Jubran <sameeh.j@gmail.com>
* Dactylmanuform: Add permissive hold support
Signed-off-by: Sameeh Jubran <sameeh.j@gmail.com>
* DactylManuform: Updating documentation
* Adding a picture of the keyboard
* Adding keymaps pictures
* Adding missing EEPROM files for EE_HANDS
flashing these before firmware will let the
user use either hand as master without reflashing
Signed-off-by: 20lives <lior@dotcore.co.il>
* add not-so-minidox handwire keyboard
* corrected keymap
* multiple adjustments to not_so_minidox keyboard
* remove I2C master left define
* update default layer set function
* move solenoid code into userspace
* minor adjustments to config.h
* update keymaps to utilize userspace
* move features and config to userspace, correct build issue
* correct solenoid pin
* adjust defaults for solenoid pin and enable
* default solenoid to on for not_so_minidox
* disable RGBLIGHT_SLEEP for xd75
* tweaking solenoid enable/disable in userspace and keymaps
* Update default Nyquist revision
* LED slave fix
* Sync changes from lets_split
* Add needed check for debouncing
* Remove line that was setting PD2 pin and interfering with use of that pin
* Add backlight key to keymap
* Use the new debounce algorithm in dactyl/matrix.c [#2065]
This incorporates the fixed/optimized debounce code added to
quantum/matrix.c in:
* 508eddf8ba
* 4c6960835c
* 32f88c0717
* f403028974
* a06115df19
* Fix the row/column swap in dactyl [#2065]
With a column-driven keyboard, reading from the mcp23081 returns a
column-state, which takes some extra work to translate into the
row-state used in the actual matrix. The ergodox_ez code sidestepped
that problem by calling rows "columns" and columns "rows." With this
change, the dactyl now calls rows "rows" and columns "columns."
* Cleanup: variable names, documentation [#2065]
* Support MATRIX_MASKED in dactyl/matrix.c [#2065]
* Only unselect one col in unselect_col [#2065]
Bonus: saves one i2c transaction per matrix_scan!
* Implement COL2ROW in dactyl/matrix.c [#2065]
* Fix a typo in dactyl/matrix.c
This entirely doesn't matter. The PORT values are set during
init_keyboard and never change. They're repeatedly set to the same
thing. These PORT lines shouldn't even exist, but since they do, they
should at least look right.
* Implement COL_PINS/ROW_PINS for dactyl [#2065]
* Rename "mcp23018" to "expander" [#2065]
I honestly don't know whether/how well this code works with other I/O
expanders, but at least in theory, it should be generic enough to work
with others. Given that, the variable names shouldn't refer to a
specific model of expander.
* Remove matrix_power_up from dactyl/matrix.c [#2065]
It's commented out in quantum/matrix.c, and the dactyl has no power
up/down behavior beyond being unplugged (which goes to matrix_init), so
there's no sense keeping it around.
* Only initialize expander_input_mask once [#2065]
...and rename input_mask to expander_input_mask, since now that it isn't
scoped to init_expander it isn't clear that it's only for the expander.
* change diverge 3 KC_KEYMAP to LAYOUT
* Change KEYMAP to LAYOUT for handwired arrow pad
* change M10A to LAYOUT for m10-a
* Change KC_KEYMAP to LAYOUT_kc and KEYMAP to LAYOUT for mf68
* change KC_KEYMAP to LAYOUT for nano
* Refactor to LAYOUT
* refactor to LAYOUT-ansi and LAYOUT_iso for s65
* LAYOUT conversions for lfkkeyboards
* missed a few renames
* mini1800 for lfkeyobards support of LAYOUT
* grep -> $(GREP)
Some UNIXy systems (FreeBSD for example) don't use GNU grep by default.
Allow the user to specify which grep implementation to use so that
GNU grep can be specified.
* Allow using versioned avr-gcc command
Don't hardcode "avr-gcc", and allow strings such as "avr-gcc8", or
"avr-gcc-7.3.0" to match checks for "avr-gcc".
* Add Colemak Mod-DH vars
* Add Norman Layot vars
* Set Shift Indicator to include CAPS Lock as well
* Change MEH to GUI
* Add Enter to Macro layer
* Switch raise and lower layers to make more sense (to me)
* Replace unused quote on Ergodox
* Add One Shot defines
* Dim indicator LEDs
* Add short codes for KC_SECRET
* Fix typos
* Update OLKB code in userspace
* Add global userspace config.h
* add compile fix
* Automatically include from userspace
* update readme
* Re-add QMK Scan loop
* Add EEPROM reset code to all keymaps
* Shorten fauxclick sound
* Use layouts instead of keymap, when possible
* Add OSM detection to ergodox
* Convert Viterbi to LAYOUT macro
* Clean up game macros
* Because I accidently removed the C6 AUDIO define from my viterbi... Whoops
* Minor formatting
* Fix Woodpad because it's still there
* Move Ergodox keymap into layouts folder
* Add build date to version macro
* Remove PREVENT_STUCK_MODIFIERS from config
