# 1k ![1k](https://booth.pximg.net/aaeb2dda-e169-44c0-ba5a-5b42cc5c2627/i/3504781/c1708a8a-061b-4a6c-907d-72d0eab47d4a.png) 1% Custom mechanical keyboard. ATtiny85 powered, with 1*WS2812 LED, and the micronucleus bootloader. **Note**: Due to limited firmware space, a _**lot**_ of features have to be disabled to get a functioning QMK based keyboard. * Keyboard Maintainer: [MakotoKurauchi](https://github.com/MakotoKurauchi) * Hardware Supported: 1k * Hardware Availability: [booth](https://ninep.booth.pm/items/3504781) Make example for this keyboard (after setting up your build environment): make 1k:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). ## Flashing ### Prerequisites ```bash git clone https://github.com/micronucleus/micronucleus.git cd micronucleus/commandline/ sudo make install ``` On Linux, you’ll need proper privileges to access the MCU. You can either use sudo when flashing firmware, or place [these files](https://github.com/micronucleus/micronucleus/blob/master/commandline/49-micronucleus.rules) in /etc/udev/rules.d/. Once added run the following: ```bash sudo udevadm control --reload-rules sudo udevadm trigger ``` ### Instructions ```bash make 1k:default:flash # or directly with... micronucleus --run <firmware.hex> ``` ### Recovery * [Original Firmware](https://github.com/xiudi/Attiny85_vusb_pad_test) * [Bootloader Repair](https://digistump.com/wiki/digispark/tutorials/proisp)