varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/rgbkb/sol3
History
XScorpion2 034e266998
Rgbkb/keeb fixes (#17932) 
* Disable console by default for better bios & reboot behavior

* Remove custom matrix

* Disable console by default for better bios & reboot behavior

* PR feedback
2022-08-07 14:01:10 +01:00
..
keymaps RESET -> QK_BOOT default keymaps (#17037) 2022-05-15 20:26:27 +01:00
rev1 Sol3 fix rgb map (#17019) 2022-05-07 01:01:16 +01:00
.noci
config.h Remove 1k USB_POLLING_INTERVAL_MS config from keyboards and default-ish keymaps (#16448) 2022-02-26 03:20:57 +00:00
halconf.h
mcuconf.h
readme.md RGBKB Sol 3 rev1: Configurator Data and Readme (#16798) 2022-04-05 12:13:45 -07:00
rules.mk Rgbkb/keeb fixes (#17932) 2022-08-07 14:01:10 +01:00
sol3.c
sol3.h

readme.md

Sol 3

Sol 3

An extensible split keyboard with hotswap sockets and per-key RGB lighting.

  • Keyboard Maintainer: XScorpion2, RGBKB
  • Hardware Supported: RGBKB Sol 3 rev1 (STM32F303)
  • Hardware Availability: RGBKB.net

Make example for this keyboard (after setting up your build environment):

make rgbkb/sol3/rev1:default

Flashing example for this keyboard:

make rgbkb/sol3/rev1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

To reset the board into bootloader mode, do one of the following:

  • Keycode in layout: Press the key mapped to RESET if it is available (Adjust + R by default)
  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard (also erases persistent settings)