forked from forks/qmk_firmware
299 lines
12 KiB
C
299 lines
12 KiB
C
// Copyright 2021 Nick Brassel (@tzarc)
|
|
// Copyright 2023 Pablo Martinez (@elpekenin) <elpekenin@elpekenin.dev>
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#include "qp_internal.h"
|
|
#include "qp_comms.h"
|
|
#include "qp_ili9486.h"
|
|
#include "qp_ili9xxx_opcodes.h"
|
|
#include "qp_tft_panel.h"
|
|
|
|
#ifdef QUANTUM_PAINTER_ILI9486_SPI_ENABLE
|
|
# include "spi_master.h"
|
|
# include <qp_comms_spi.h>
|
|
#endif // QUANTUM_PAINTER_ILI9486_SPI_ENABLE
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Common
|
|
|
|
// Driver storage
|
|
tft_panel_dc_reset_painter_device_t ili9486_drivers[ILI9486_NUM_DEVICES] = {0};
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Initialization
|
|
|
|
bool qp_ili9486_init(painter_device_t device, painter_rotation_t rotation) {
|
|
// clang-format off
|
|
const uint8_t ili9486_init_sequence[] = {
|
|
// Command, Delay, N, Data[N]
|
|
ILI9XXX_CMD_RESET, 120, 0,
|
|
ILI9XXX_SET_PIX_FMT, 0, 1, 0x55,
|
|
ILI9XXX_SET_PGAMMA, 0, 15, 0x0F, 0x1F, 0x1C, 0x0C, 0x0F, 0x08, 0x48, 0x98, 0x37, 0x0A, 0x13, 0x04, 0x11, 0x0D, 0x00,
|
|
ILI9XXX_SET_NGAMMA, 0, 15, 0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75, 0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00,
|
|
ILI9XXX_SET_POWER_CTL_1, 0, 2, 0x0D, 0x0D,
|
|
ILI9XXX_SET_POWER_CTL_2, 0, 2, 0x43, 0x00,
|
|
ILI9XXX_SET_POWER_CTL_3, 0, 1, 0x00,
|
|
ILI9XXX_SET_VCOM_CTL_1, 0, 4, 0x00, 0x48, 0x00, 0x48,
|
|
ILI9XXX_SET_INVERSION_CTL, 0, 1, 0x02,
|
|
};
|
|
// clang-format on
|
|
qp_comms_bulk_command_sequence(device, ili9486_init_sequence, sizeof(ili9486_init_sequence));
|
|
|
|
// Configure the rotation (i.e. the ordering and direction of memory writes in GRAM)
|
|
const uint8_t madctl[] = {
|
|
[QP_ROTATION_0] = ILI9XXX_MADCTL_BGR,
|
|
[QP_ROTATION_90] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MV,
|
|
[QP_ROTATION_180] = ILI9XXX_MADCTL_BGR,
|
|
[QP_ROTATION_270] = ILI9XXX_MADCTL_BGR | ILI9XXX_MADCTL_MV,
|
|
};
|
|
const uint8_t functl[] = {
|
|
[QP_ROTATION_0] = 0x42,
|
|
[QP_ROTATION_90] = 0x62,
|
|
[QP_ROTATION_180] = 0x22,
|
|
[QP_ROTATION_270] = 0x02,
|
|
};
|
|
|
|
// clang-format off
|
|
uint8_t rotation_sequence[] = {
|
|
// Command, Delay, N, Data[N]
|
|
ILI9XXX_SET_MEM_ACS_CTL, 0, 1, madctl[rotation],
|
|
ILI9XXX_SET_FUNCTION_CTL, 0, 2, 0x00, functl[rotation],
|
|
ILI9XXX_CMD_SLEEP_OFF, 5, 0,
|
|
ILI9XXX_CMD_DISPLAY_ON, 5, 0,
|
|
};
|
|
// clang-format on
|
|
qp_comms_bulk_command_sequence(device, rotation_sequence, sizeof(rotation_sequence));
|
|
|
|
return true;
|
|
}
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// Driver vtable
|
|
|
|
// waveshare variant needs some tweaks due to shift registers
|
|
static void qp_comms_spi_dc_reset_send_command_odd_cs_pulse(painter_device_t device, uint8_t cmd) {
|
|
painter_driver_t * driver = (painter_driver_t *)device;
|
|
qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config;
|
|
|
|
writePinLow(comms_config->spi_config.chip_select_pin);
|
|
qp_comms_spi_dc_reset_send_command(device, cmd);
|
|
writePinHigh(comms_config->spi_config.chip_select_pin);
|
|
}
|
|
|
|
static uint32_t qp_comms_spi_send_data_odd_cs_pulse(painter_device_t device, const void *data, uint32_t byte_count) {
|
|
painter_driver_t * driver = (painter_driver_t *)device;
|
|
qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config;
|
|
|
|
uint32_t bytes_remaining = byte_count;
|
|
const uint8_t *p = (const uint8_t *)data;
|
|
uint32_t max_msg_length = 1024;
|
|
|
|
writePinHigh(comms_config->dc_pin);
|
|
while (bytes_remaining > 0) {
|
|
uint32_t bytes_this_loop = QP_MIN(bytes_remaining, max_msg_length);
|
|
bool odd_bytes = bytes_this_loop & 1;
|
|
|
|
// send data
|
|
writePinLow(comms_config->spi_config.chip_select_pin);
|
|
spi_transmit(p, bytes_this_loop);
|
|
p += bytes_this_loop;
|
|
|
|
// extra CS toggle, for alignment
|
|
if (odd_bytes) {
|
|
writePinHigh(comms_config->spi_config.chip_select_pin);
|
|
writePinLow(comms_config->spi_config.chip_select_pin);
|
|
}
|
|
|
|
bytes_remaining -= bytes_this_loop;
|
|
}
|
|
|
|
return byte_count - bytes_remaining;
|
|
}
|
|
|
|
static uint32_t qp_ili9486_send_data_toggling(painter_device_t device, const uint8_t *data, uint32_t byte_count) {
|
|
painter_driver_t * driver = (painter_driver_t *)device;
|
|
qp_comms_spi_dc_reset_config_t *comms_config = (qp_comms_spi_dc_reset_config_t *)driver->comms_config;
|
|
|
|
uint32_t ret;
|
|
for (uint8_t j = 0; j < byte_count; ++j) {
|
|
writePinLow(comms_config->spi_config.chip_select_pin);
|
|
ret = qp_comms_spi_dc_reset_send_data(device, &data[j], 1);
|
|
writePinHigh(comms_config->spi_config.chip_select_pin);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void qp_comms_spi_send_command_sequence_odd_cs_pulse(painter_device_t device, const uint8_t *sequence, size_t sequence_len) {
|
|
for (size_t i = 0; i < sequence_len;) {
|
|
uint8_t command = sequence[i];
|
|
uint8_t delay = sequence[i + 1];
|
|
uint8_t num_bytes = sequence[i + 2];
|
|
|
|
qp_comms_spi_dc_reset_send_command_odd_cs_pulse(device, command);
|
|
if (num_bytes > 0) {
|
|
qp_ili9486_send_data_toggling(device, &sequence[i + 3], num_bytes);
|
|
}
|
|
|
|
if (delay > 0) {
|
|
wait_ms(delay);
|
|
}
|
|
i += (3 + num_bytes);
|
|
}
|
|
}
|
|
|
|
static bool qp_ili9486_viewport(painter_device_t device, uint16_t left, uint16_t top, uint16_t right, uint16_t bottom) {
|
|
painter_driver_t * driver = (painter_driver_t *)device;
|
|
tft_panel_dc_reset_painter_driver_vtable_t *vtable = (tft_panel_dc_reset_painter_driver_vtable_t *)driver->driver_vtable;
|
|
|
|
// Fix up the drawing location if required
|
|
left += driver->offset_x;
|
|
right += driver->offset_x;
|
|
top += driver->offset_y;
|
|
bottom += driver->offset_y;
|
|
|
|
// Check if we need to manually swap the window coordinates based on whether or not we're in a sideways rotation
|
|
if (vtable->swap_window_coords && (driver->rotation == QP_ROTATION_90 || driver->rotation == QP_ROTATION_270)) {
|
|
uint16_t temp;
|
|
|
|
temp = left;
|
|
left = top;
|
|
top = temp;
|
|
|
|
temp = right;
|
|
right = bottom;
|
|
bottom = temp;
|
|
}
|
|
|
|
// Set up the x-window
|
|
uint8_t xbuf[4] = {left >> 8, left & 0xFF, right >> 8, right & 0xFF};
|
|
qp_comms_spi_dc_reset_send_command_odd_cs_pulse(device, vtable->opcodes.set_column_address);
|
|
qp_ili9486_send_data_toggling(device, xbuf, 4);
|
|
|
|
// Set up the y-window
|
|
uint8_t ybuf[4] = {top >> 8, top & 0xFF, bottom >> 8, bottom & 0xFF};
|
|
qp_comms_spi_dc_reset_send_command_odd_cs_pulse(device, vtable->opcodes.set_row_address);
|
|
qp_ili9486_send_data_toggling(device, ybuf, 4);
|
|
|
|
// Lock in the window
|
|
qp_comms_spi_dc_reset_send_command_odd_cs_pulse(device, vtable->opcodes.enable_writes);
|
|
return true;
|
|
}
|
|
|
|
// Regular
|
|
const tft_panel_dc_reset_painter_driver_vtable_t ili9486_driver_vtable = {
|
|
.base =
|
|
{
|
|
.init = qp_ili9486_init,
|
|
.power = qp_tft_panel_power,
|
|
.clear = qp_tft_panel_clear,
|
|
.flush = qp_tft_panel_flush,
|
|
.pixdata = qp_tft_panel_pixdata,
|
|
.viewport = qp_tft_panel_viewport,
|
|
.palette_convert = qp_tft_panel_palette_convert_rgb565_swapped,
|
|
.append_pixels = qp_tft_panel_append_pixels_rgb565,
|
|
.append_pixdata = qp_tft_panel_append_pixdata,
|
|
},
|
|
.num_window_bytes = 2,
|
|
.swap_window_coords = false,
|
|
.opcodes =
|
|
{
|
|
.display_on = ILI9XXX_CMD_DISPLAY_ON,
|
|
.display_off = ILI9XXX_CMD_DISPLAY_OFF,
|
|
.set_column_address = ILI9XXX_SET_COL_ADDR,
|
|
.set_row_address = ILI9XXX_SET_PAGE_ADDR,
|
|
.enable_writes = ILI9XXX_SET_MEM,
|
|
},
|
|
};
|
|
|
|
// Waveshare tweaks
|
|
const tft_panel_dc_reset_painter_driver_vtable_t ili9486_waveshare_driver_vtable = {
|
|
.base =
|
|
{
|
|
.init = qp_ili9486_init,
|
|
.power = qp_tft_panel_power,
|
|
.clear = qp_tft_panel_clear,
|
|
.flush = qp_tft_panel_flush,
|
|
.pixdata = qp_tft_panel_pixdata,
|
|
.viewport = qp_ili9486_viewport,
|
|
.palette_convert = qp_tft_panel_palette_convert_rgb565_swapped,
|
|
.append_pixels = qp_tft_panel_append_pixels_rgb565,
|
|
.append_pixdata = qp_tft_panel_append_pixdata,
|
|
},
|
|
.num_window_bytes = 2,
|
|
.swap_window_coords = false,
|
|
.opcodes =
|
|
{
|
|
.display_on = ILI9XXX_CMD_DISPLAY_ON,
|
|
.display_off = ILI9XXX_CMD_DISPLAY_OFF,
|
|
.set_column_address = ILI9XXX_SET_COL_ADDR,
|
|
.set_row_address = ILI9XXX_SET_PAGE_ADDR,
|
|
.enable_writes = ILI9XXX_SET_MEM,
|
|
},
|
|
};
|
|
|
|
static const painter_comms_with_command_vtable_t spi_comms_odd_cs_pulse_vtable = {
|
|
.base =
|
|
{
|
|
.comms_init = qp_comms_spi_dc_reset_init,
|
|
.comms_start = qp_comms_spi_start,
|
|
.comms_send = qp_comms_spi_send_data_odd_cs_pulse,
|
|
.comms_stop = qp_comms_spi_stop,
|
|
},
|
|
.send_command = qp_comms_spi_dc_reset_send_command_odd_cs_pulse,
|
|
.bulk_command_sequence = qp_comms_spi_send_command_sequence_odd_cs_pulse,
|
|
};
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|
|
// SPI
|
|
|
|
#ifdef QUANTUM_PAINTER_ILI9486_SPI_ENABLE
|
|
|
|
// Factory function for creating a handle to the ILI9486 device
|
|
painter_device_t qp_ili9486_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode) {
|
|
for (uint32_t i = 0; i < ILI9486_NUM_DEVICES; ++i) {
|
|
tft_panel_dc_reset_painter_device_t *driver = &ili9486_drivers[i];
|
|
if (!driver->base.driver_vtable) {
|
|
driver->base.driver_vtable = (const painter_driver_vtable_t *)&ili9486_driver_vtable;
|
|
driver->base.comms_vtable = (const painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
|
|
driver->base.native_bits_per_pixel = 16; // RGB565
|
|
driver->base.panel_width = panel_width;
|
|
driver->base.panel_height = panel_height;
|
|
driver->base.rotation = QP_ROTATION_0;
|
|
driver->base.offset_x = 0;
|
|
driver->base.offset_y = 0;
|
|
|
|
// SPI and other pin configuration
|
|
driver->base.comms_config = &driver->spi_dc_reset_config;
|
|
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
|
|
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
|
|
driver->spi_dc_reset_config.spi_config.lsb_first = false;
|
|
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
|
|
driver->spi_dc_reset_config.dc_pin = dc_pin;
|
|
driver->spi_dc_reset_config.reset_pin = reset_pin;
|
|
|
|
if (!qp_internal_register_device((painter_device_t)driver)) {
|
|
memset(driver, 0, sizeof(tft_panel_dc_reset_painter_device_t));
|
|
return NULL;
|
|
}
|
|
|
|
return (painter_device_t)driver;
|
|
}
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
painter_device_t qp_ili9486_make_spi_waveshare_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode) {
|
|
painter_device_t device = qp_ili9486_make_spi_device(panel_width, panel_height, chip_select_pin, dc_pin, reset_pin, spi_divisor, spi_mode);
|
|
if (device) {
|
|
tft_panel_dc_reset_painter_device_t *driver = (tft_panel_dc_reset_painter_device_t *)device;
|
|
driver->base.driver_vtable = (const painter_driver_vtable_t *)&ili9486_waveshare_driver_vtable;
|
|
driver->base.comms_vtable = (const painter_comms_vtable_t *)&spi_comms_odd_cs_pulse_vtable;
|
|
}
|
|
return device;
|
|
}
|
|
|
|
#endif // QUANTUM_PAINTER_ILI9486_SPI_ENABLE
|
|
|
|
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
|