varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/yandrstudio/nz67v2
History
Stefan Kerkmann fcf8b804ed
[Core] Refactor keyevent_t for 1ms timing resolution (#15847)
2023-04-03 18:33:45 +10:00
..
keymaps [Core] Refactor keyevent_t for 1ms timing resolution (#15847) 2023-04-03 18:33:45 +10:00
board.h Fixup ChibiOS header inclusion search ordering. (#19623) 2023-01-19 01:05:29 +00:00
config.h Move matrix config to info.json, part 1 (#19985) 2023-03-05 22:53:52 +00:00
halconf.h
info.json Move WS2812_DRIVER to data driven (#20248) 2023-03-26 18:22:12 +11:00
mcuconf.h
nz67v2.c Remove magic bodges from via keymaps (#19890) 2023-02-22 01:15:18 +00:00
nz67v2.h Remove magic bodges from via keymaps (#19890) 2023-02-22 01:15:18 +00:00
readme.md
rules.mk Move WS2812_DRIVER to data driven (#20248) 2023-03-26 18:22:12 +11:00

readme.md

nz67v2

nz67v2

A 67 keys keyboard with rgb (key and underground). This keyboard use 16mhz HSE and APM32F103 as MCU.

Make example for this keyboard (after setting up your build environment):

make yandrstudio/nz67v2:default

See build environment setup then the make instructions for more information.

Bootloader

Enter the bootloader in 2 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key which is Escape in this keyboard) and plug in the keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available.