forked from forks/qmk_firmware
31 lines
1.3 KiB
Markdown
31 lines
1.3 KiB
Markdown
# Ploopyco Trackball
|
|
|
|
|
|
|
|
It's a DIY, QMK Powered Trackball!!!!
|
|
|
|
* Keyboard Maintainer: [PloopyCo](https://github.com/ploopyco), [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/)
|
|
* Hardware Supported: ATMega32u4 8MHz(3.3v)
|
|
* Hardware Availability: [Store](https://ploopy.co), [GitHub](https://github.com/ploopyco)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make ploopyco/trackball/rev1:default:flash
|
|
make ploopyco/trackball/rev1_005:default:flash
|
|
|
|
To jump to the bootloader, hold down "Button 4" (immediate right of the trackball)
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Revisions
|
|
|
|
There are two main revisions for the PloopyCo Trackball, everything up to 1.004, and 1.005-1.006.
|
|
|
|
In the 1.005 revision, button for was changed from pin B5 to B6, and the debug LED pin was changed from F7 to B5.
|
|
|
|
The PCB should indicate which revision this is.
|
|
|
|
# Customizing your PloopyCo Trackball
|
|
|
|
You can find customziation options [here](../readme.md).
|