forked from forks/qmk_firmware
bdd1f318c3
Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: mtei <2170248+mtei@users.noreply.github.com> Co-authored-by: Nick Brassel <nick@tzarc.org>
48 lines
1.6 KiB
Markdown
48 lines
1.6 KiB
Markdown
# 1k
|
||
|
||
|
||
|
||
1% Custom mechanical keyboard. ATtiny85 powered, with 1*WS2812 LED, and the micronucleus bootloader.
|
||
|
||
**Note**: Due to limited firmware space, a _**lot**_ of features have to be disabled to get a functioning QMK based keyboard.
|
||
|
||
* Keyboard Maintainer: [MakotoKurauchi](https://github.com/MakotoKurauchi)
|
||
* Hardware Supported: 1k
|
||
* Hardware Availability: [booth](https://ninep.booth.pm/items/3504781)
|
||
|
||
Make example for this keyboard (after setting up your build environment):
|
||
|
||
make 1k:default
|
||
|
||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
||
## Flashing
|
||
### Prerequisites
|
||
|
||
```bash
|
||
git clone https://github.com/micronucleus/micronucleus.git
|
||
cd micronucleus/commandline/
|
||
sudo make install
|
||
```
|
||
|
||
On Linux, you’ll need proper privileges to access the MCU. You can either use sudo when flashing firmware, or place [these files](https://github.com/micronucleus/micronucleus/blob/master/commandline/49-micronucleus.rules) in /etc/udev/rules.d/. Once added run the following:
|
||
|
||
```bash
|
||
sudo udevadm control --reload-rules
|
||
sudo udevadm trigger
|
||
```
|
||
|
||
### Instructions
|
||
|
||
```bash
|
||
make 1k:default:flash
|
||
|
||
# or directly with...
|
||
micronucleus --run <firmware.hex>
|
||
```
|
||
|
||
### Recovery
|
||
|
||
* [Original Firmware](https://github.com/xiudi/Attiny85_vusb_pad_test)
|
||
* [Bootloader Repair](https://digistump.com/wiki/digispark/tutorials/proisp)
|