forked from forks/qmk_firmware
27 lines
1.2 KiB
Markdown
27 lines
1.2 KiB
Markdown
# ScottoSplit
|
|
|
|
|
|
|
|
A 36-key split column-staggered ortholinear keyboard that uses a single MCU and VGA cable to connect the halves. Case files available [here](https://github.com/joe-scotto/scottokeebs).
|
|
|
|
* Keyboard Maintainer: [Joe Scotto](https://github.com/joe-scotto)
|
|
* Hardware Supported: ATmega32U4
|
|
* Hardware Availability: [Amazon](https://amazon.com)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make handwired/jscotto/scottosplit:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make handwired/jscotto/scottosplit:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |