forked from forks/qmk_firmware
78 lines
2.4 KiB
C
78 lines
2.4 KiB
C
/*
|
|
Copyright 2020 Matthew Tso (zoo)
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
|
|
/*
|
|
* Keyboard Matrix Assignments
|
|
*
|
|
* Change this to how you wired your keyboard
|
|
* COLS: AVR pins used for columns, left to right
|
|
* ROWS: AVR pins used for rows, top to bottom
|
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
|
*
|
|
*/
|
|
#define MATRIX_ROW_PINS { C13, C14, A5, A4, A3 }
|
|
#define MATRIX_COL_PINS { A10, A9, A8, B12, A15, A13, A7, A2, A1, A0, F1, F0, B3, B4, B5 }
|
|
|
|
/* COL2ROW, ROW2COL */
|
|
#define DIODE_DIRECTION COL2ROW
|
|
|
|
// In-switch LED defines
|
|
#define BACKLIGHT_PIN A6
|
|
#define BACKLIGHT_BREATHING
|
|
|
|
#define BACKLIGHT_PWM_DRIVER PWMD3
|
|
#define BACKLIGHT_PWM_CHANNEL 1
|
|
#define BACKLIGHT_PAL_MODE 1
|
|
|
|
// RGB Underglow WS2812 Matrix defines
|
|
#define RGBLIGHT_EFFECT_BREATHING
|
|
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
|
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
|
#define RGBLIGHT_EFFECT_SNAKE
|
|
#define RGBLIGHT_EFFECT_KNIGHT
|
|
#define RGBLIGHT_EFFECT_CHRISTMAS
|
|
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
|
#define RGBLIGHT_EFFECT_RGB_TEST
|
|
#define RGBLIGHT_EFFECT_ALTERNATING
|
|
#define RGBLIGHT_EFFECT_TWINKLE
|
|
#define RGB_DI_PIN B15
|
|
#define RGBLED_NUM 20
|
|
// SPI RGB Driver
|
|
#define WS2812_SPI SPID2
|
|
#define WS2812_SPI_MOSI_PAL_MODE 0
|
|
#define WS2812_SPI_SCK_PAL_MODE 0
|
|
#define WS2812_SPI_SCK_PIN B13
|
|
|
|
// OLED defines
|
|
#define OLED_TIMEOUT 60000
|
|
#define I2C1_SCL_PAL_MODE 1
|
|
#define I2C1_SDA_PAL_MODE 1
|
|
/* This configures the I2C clock to 400khz assuming a 48Mhz clock */
|
|
#define I2C1_TIMINGR_SCLDEL 3U
|
|
#define I2C1_TIMINGR_SDADEL 1U
|
|
#define I2C1_TIMINGR_SCLH 3U
|
|
#define I2C1_TIMINGR_SCLL 9U
|
|
|
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
#define LOCKING_SUPPORT_ENABLE
|
|
/* Locking resynchronize hack */
|
|
#define LOCKING_RESYNC_ENABLE
|