varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/sawnsprojects/krush/krush65/hotswap
History
Ryan 47966dc2a6
Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303)
2023-04-06 18:00:54 +10:00
..
keymaps
config.h Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
encoder_actions.c [Core] Refactor keyevent_t for 1ms timing resolution (#15847) 2023-04-03 18:33:45 +10:00
encoder_actions.h Add some missing #pragma onces (#19902) 2023-02-21 15:55:23 +00:00
hotswap.c Add core/fallback encoder behaviour (#20320) 2023-04-03 10:18:17 -06:00
hotswap.h
info.json Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Krush65 Hotswap

Krush65

A 65% keyboard PCB made and sold by SawnsProjects with Nuxros in mechkey.store.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available

Make example for this keyboard (after setting up your build environment):

make sawnsprojects/krush/krush65/hotswap:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.