varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/ducky/one2sf/1967st
History
Joel Challis a0a6820c1b
Migrate some dip switch config to info.json (#22437)
2023-11-23 08:33:59 +11:00
..
boards/NUC123SD4AN0 [Keyboard] Add Support to Ducky One2 SF (#17260) 2022-07-03 00:04:46 +10:00
chconf.h [Keyboard] Add Support to Ducky One2 SF (#17260) 2022-07-03 00:04:46 +10:00
config.h Migrate some dip switch config to info.json (#22437) 2023-11-23 08:33:59 +11:00
info.json Migrate some dip switch config to info.json (#22437) 2023-11-23 08:33:59 +11:00
matrix_diagram.md Ducky One 2 SF 1967ST Layout Macro Additions (#20600) 2023-04-27 22:45:26 -07:00
mcuconf.h [Keyboard] Add Support to Ducky One2 SF (#17260) 2022-07-03 00:04:46 +10:00
readme.md Ducky One 2 SF 1967ST Layout Macro Additions (#20600) 2023-04-27 22:45:26 -07:00
rules.mk Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353) 2023-06-23 20:31:25 +01:00

readme.md

One 2 SF (DKON1967ST)

A 65% keyboard by Ducky.

This firmware was tested on the Ducky One 2 SF 1967ST version.

  • Keyboard Maintainer: f7urry
  • Hardware Supported: Ducky One 2 SF RGB (DKON1967ST), NUC123SD4AN0 + MBI5043GP
    • Only ANSI layout is supported at this time
    • ISO compiles but is untested
    • VIA still WIP.
    • RGB LEDs are currently disabled until the driver is merged.

Compiling the Firmware:

make ducky/one2sf/1967st:default

Accessing Bootloader Mode

To enter the 1967ST bootloader to flash, boot the keyboard while holding D+L.

Flashing the Firmware:

There are then two ways to flash the keyboard:

pip install --user nuvoton-isp
nuvoisp -f ducky_one2sf_ansi.bin

Alternatively you can use elfmimi's nu-isp-cli which is more complete than nuvoisp and allows flashing .hex files as well.

cargo install nu-isp-cli
nu-isp-cli flash ducky_one2sf_ansi.bin

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.