varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/ymdk/ym68
History
James Young 6edcbdca19
[Keyboard] YMDK YM68 (#12352) 
* [Keyboard] YMDK YM68

Converted from a KBFirmware JSON file provided via the vendor's product listing.

PCB supports Backlight on B6 and RGB Underglow on E2, but the LEDs are not pre-soldered according to the PCB photos.

* update VENDOR_ID and PRODUCT_ID
2021-03-24 02:07:12 -07:00
..
keymaps/default [Keyboard] YMDK YM68 (#12352) 2021-03-24 02:07:12 -07:00
config.h [Keyboard] YMDK YM68 (#12352) 2021-03-24 02:07:12 -07:00
info.json [Keyboard] YMDK YM68 (#12352) 2021-03-24 02:07:12 -07:00
readme.md [Keyboard] YMDK YM68 (#12352) 2021-03-24 02:07:12 -07:00
rules.mk [Keyboard] YMDK YM68 (#12352) 2021-03-24 02:07:12 -07:00
ym68.c [Keyboard] YMDK YM68 (#12352) 2021-03-24 02:07:12 -07:00
ym68.h [Keyboard] YMDK YM68 (#12352) 2021-03-24 02:07:12 -07:00

readme.md

YM68

YM68

A 65% keyboard kit with support for in-switch LEDs and RGB Underglow.

Make example for this keyboard (after setting up your build environment):

make ymdk/ym68:default

Flashing example for this keyboard:

make ymdk/ym68:default:flash

To reset the board into bootloader mode, do one of the following:

  • Tap the Reset switch mounted on the bottom side of the PCB
  • Hold the key at the top left of the keyboard while connecting the USB cable (also erases persistent settings)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.