History

Joel Challis 831deac212 Migrate build target markers to keyboard.json (#23293 )		2024-03-30 11:31:50 +00:00
..
rev1	Migrate build target markers to keyboard.json (#23293 )	2024-03-30 11:31:50 +00:00
readme.md	Late9 keymaps update, added VIA support (#22801 )	2024-02-19 11:23:33 +00:00
rules.mk

readme.md

LATE-9

The LATE-9 is a multi-tap input keyboard based on mobile phones from the late '90s. LATE-9 is intended as a dev board with 18 buttons and an OLED screen, made by through-hole components only. With this, you can experiment QMK OLED capabilities with very little expense.

Keyboard maintainer: rookiebwoy
Hardware supported: ProMicro, Elite-C (not tested)
Hardware Availability: LATE-9 is open source, check the project repository for gerbers.

Make example for this keyboard (after setting up your build environment):

make rookiebwoy/late9/rev1:default

Flashing example for this keyboard:

make rookiebwoy/late9/rev1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

When asked by the terminal, short with a metal wire the pins on the backside of the board highlighted as RST (one is the RESET and the other one is GROUND) to enter the bootloader and let the OS detects the device.
After installing this firmware you can use Bootmagic to enter the bootloader while plugging in your LATE-9. By default it's the button on the upper-left of the keyboard.