forked from forks/qmk_firmware
256 lines
6.9 KiB
C++
256 lines
6.9 KiB
C++
/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
|
|
|
|
This software may be distributed and modified under the terms of the GNU
|
|
General Public License version 2 (GPL2) as published by the Free Software
|
|
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
|
this file. Please note that GPL2 Section 2[b] requires that all works based
|
|
on this software must also be made publicly available under the terms of
|
|
the GPL2 ("Copyleft").
|
|
|
|
Contact information
|
|
-------------------
|
|
|
|
Circuits At Home, LTD
|
|
Web : http://www.circuitsathome.com
|
|
e-mail : support@circuitsathome.com
|
|
*/
|
|
#include "max_LCD.h"
|
|
#include <string.h>
|
|
|
|
// pin definition and set/clear
|
|
|
|
#define RS 0x04 // RS pin
|
|
#define E 0x08 // E pin
|
|
|
|
#define SET_RS lcdPins |= RS
|
|
#define CLR_RS lcdPins &= ~RS
|
|
#define SET_E lcdPins |= E
|
|
#define CLR_E lcdPins &= ~E
|
|
|
|
#define SENDlcdPins() pUsb->gpioWr( lcdPins )
|
|
|
|
#define LCD_sendcmd(a) { CLR_RS; \
|
|
sendbyte(a); \
|
|
}
|
|
|
|
#define LCD_sendchar(a) { SET_RS; \
|
|
sendbyte(a); \
|
|
}
|
|
|
|
static byte lcdPins; //copy of LCD pins
|
|
|
|
Max_LCD::Max_LCD(USB *pusb) : pUsb(pusb) {
|
|
lcdPins = 0;
|
|
}
|
|
|
|
void Max_LCD::init() {
|
|
_displayfunction = LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS;
|
|
|
|
// MAX3421E::gpioWr(0x55);
|
|
|
|
begin(16, 1);
|
|
}
|
|
|
|
void Max_LCD::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) {
|
|
if(lines > 1) {
|
|
_displayfunction |= LCD_2LINE;
|
|
}
|
|
_numlines = lines;
|
|
_currline = 0;
|
|
|
|
// for some 1 line displays you can select a 10 pixel high font
|
|
if((dotsize != 0) && (lines == 1)) {
|
|
_displayfunction |= LCD_5x10DOTS;
|
|
}
|
|
|
|
// SEE PAGE 45/46 FOR INITIALIZATION SPECIFICATION!
|
|
// according to datasheet, we need at least 40ms after power rises above 2.7V
|
|
// before sending commands. Arduino can turn on way befer 4.5V so we'll wait 50
|
|
delayMicroseconds(50000);
|
|
lcdPins = 0x30;
|
|
SET_E;
|
|
SENDlcdPins();
|
|
CLR_E;
|
|
SENDlcdPins();
|
|
delayMicroseconds(10000); // wait min 4.1ms
|
|
//second try
|
|
SET_E;
|
|
SENDlcdPins();
|
|
CLR_E;
|
|
SENDlcdPins();
|
|
delayMicroseconds(10000); // wait min 4.1ms
|
|
// third go!
|
|
SET_E;
|
|
SENDlcdPins();
|
|
CLR_E;
|
|
SENDlcdPins();
|
|
delayMicroseconds(10000);
|
|
// finally, set to 4-bit interface
|
|
lcdPins = 0x20;
|
|
//SET_RS;
|
|
SET_E;
|
|
SENDlcdPins();
|
|
//CLR_RS;
|
|
CLR_E;
|
|
SENDlcdPins();
|
|
delayMicroseconds(10000);
|
|
// finally, set # lines, font size, etc.
|
|
command(LCD_FUNCTIONSET | _displayfunction);
|
|
|
|
// turn the display on with no cursor or blinking default
|
|
_displaycontrol = LCD_DISPLAYON | LCD_CURSOROFF | LCD_BLINKOFF;
|
|
display();
|
|
|
|
// clear it off
|
|
clear();
|
|
|
|
// Initialize to default text direction (for romance languages)
|
|
_displaymode = LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT;
|
|
// set the entry mode
|
|
command(LCD_ENTRYMODESET | _displaymode);
|
|
}
|
|
|
|
/********** high level commands, for the user! */
|
|
void Max_LCD::clear() {
|
|
command(LCD_CLEARDISPLAY); // clear display, set cursor position to zero
|
|
delayMicroseconds(2000); // this command takes a long time!
|
|
}
|
|
|
|
void Max_LCD::home() {
|
|
command(LCD_RETURNHOME); // set cursor position to zero
|
|
delayMicroseconds(2000); // this command takes a long time!
|
|
}
|
|
|
|
void Max_LCD::setCursor(uint8_t col, uint8_t row) {
|
|
int row_offsets[] = {0x00, 0x40, 0x14, 0x54};
|
|
if(row > _numlines) {
|
|
row = _numlines - 1; // we count rows starting w/0
|
|
}
|
|
|
|
command(LCD_SETDDRAMADDR | (col + row_offsets[row]));
|
|
}
|
|
|
|
// Turn the display on/off (quickly)
|
|
|
|
void Max_LCD::noDisplay() {
|
|
_displaycontrol &= ~LCD_DISPLAYON;
|
|
command(LCD_DISPLAYCONTROL | _displaycontrol);
|
|
}
|
|
|
|
void Max_LCD::display() {
|
|
_displaycontrol |= LCD_DISPLAYON;
|
|
command(LCD_DISPLAYCONTROL | _displaycontrol);
|
|
}
|
|
|
|
// Turns the underline cursor on/off
|
|
|
|
void Max_LCD::noCursor() {
|
|
_displaycontrol &= ~LCD_CURSORON;
|
|
command(LCD_DISPLAYCONTROL | _displaycontrol);
|
|
}
|
|
|
|
void Max_LCD::cursor() {
|
|
_displaycontrol |= LCD_CURSORON;
|
|
command(LCD_DISPLAYCONTROL | _displaycontrol);
|
|
}
|
|
|
|
|
|
// Turn on and off the blinking cursor
|
|
|
|
void Max_LCD::noBlink() {
|
|
_displaycontrol &= ~LCD_BLINKON;
|
|
command(LCD_DISPLAYCONTROL | _displaycontrol);
|
|
}
|
|
|
|
void Max_LCD::blink() {
|
|
_displaycontrol |= LCD_BLINKON;
|
|
command(LCD_DISPLAYCONTROL | _displaycontrol);
|
|
}
|
|
|
|
// These commands scroll the display without changing the RAM
|
|
|
|
void Max_LCD::scrollDisplayLeft(void) {
|
|
command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVELEFT);
|
|
}
|
|
|
|
void Max_LCD::scrollDisplayRight(void) {
|
|
command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVERIGHT);
|
|
}
|
|
|
|
// This is for text that flows Left to Right
|
|
|
|
void Max_LCD::leftToRight(void) {
|
|
_displaymode |= LCD_ENTRYLEFT;
|
|
command(LCD_ENTRYMODESET | _displaymode);
|
|
}
|
|
|
|
// This is for text that flows Right to Left
|
|
|
|
void Max_LCD::rightToLeft(void) {
|
|
_displaymode &= ~LCD_ENTRYLEFT;
|
|
command(LCD_ENTRYMODESET | _displaymode);
|
|
}
|
|
|
|
// This will 'right justify' text from the cursor
|
|
|
|
void Max_LCD::autoscroll(void) {
|
|
_displaymode |= LCD_ENTRYSHIFTINCREMENT;
|
|
command(LCD_ENTRYMODESET | _displaymode);
|
|
}
|
|
|
|
// This will 'left justify' text from the cursor
|
|
|
|
void Max_LCD::noAutoscroll(void) {
|
|
_displaymode &= ~LCD_ENTRYSHIFTINCREMENT;
|
|
command(LCD_ENTRYMODESET | _displaymode);
|
|
}
|
|
|
|
// Allows us to fill the first 8 CGRAM locations
|
|
// with custom characters
|
|
|
|
void Max_LCD::createChar(uint8_t location, uint8_t charmap[]) {
|
|
location &= 0x7; // we only have 8 locations 0-7
|
|
command(LCD_SETCGRAMADDR | (location << 3));
|
|
for(int i = 0; i < 8; i++) {
|
|
write(charmap[i]);
|
|
}
|
|
}
|
|
|
|
/*********** mid level commands, for sending data/cmds */
|
|
|
|
inline void Max_LCD::command(uint8_t value) {
|
|
LCD_sendcmd(value);
|
|
delayMicroseconds(100);
|
|
}
|
|
|
|
#if defined(ARDUINO) && ARDUINO >=100
|
|
|
|
inline size_t Max_LCD::write(uint8_t value) {
|
|
LCD_sendchar(value);
|
|
return 1; // Assume success
|
|
}
|
|
#else
|
|
|
|
inline void Max_LCD::write(uint8_t value) {
|
|
LCD_sendchar(value);
|
|
}
|
|
#endif
|
|
|
|
void Max_LCD::sendbyte(uint8_t val) {
|
|
lcdPins &= 0x0f; //prepare place for the upper nibble
|
|
lcdPins |= (val & 0xf0); //copy upper nibble to LCD variable
|
|
SET_E; //send
|
|
SENDlcdPins();
|
|
delayMicroseconds(2);
|
|
CLR_E;
|
|
delayMicroseconds(2);
|
|
SENDlcdPins();
|
|
lcdPins &= 0x0f; //prepare place for the lower nibble
|
|
lcdPins |= (val << 4) & 0xf0; //copy lower nibble to LCD variable
|
|
SET_E; //send
|
|
SENDlcdPins();
|
|
CLR_E;
|
|
SENDlcdPins();
|
|
delayMicroseconds(100);
|
|
}
|