varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/ekow/akira
History
Ryan f9aeea64c1
Migrate MCU and BOOTLOADER to data-driven (#19529)
2023-02-08 18:41:46 +11:00
..
keymaps Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
akira.c Adding akira (#16982) 2022-05-10 17:00:30 +01:00
akira.h Adding akira (#16982) 2022-05-10 17:00:30 +01:00
config.h Debounce defines cleanup (#19742) 2023-02-03 19:19:58 +00:00
info.json Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

AKIRA

  • Keyboard Maintainer: eugenepy
  • Hardware Supported: AKIRA pcb, both Hotswap and solderable.
  • Hardware Availability: Not yet on groupbuy

Build

Make example for this keyboard (after setting up your build environment):

make ekow/akira:default

Flashing example for this keyboard:

make ekow/akira:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the Buttom on the back of the PCB, the board will enter the dfu-mode, no extra pads need to short.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available