forked from forks/qmk_firmware
9632360caa
* Add ARRAY_SIZE and CEILING utility macros * Apply a coccinelle patch to use ARRAY_SIZE * fix up some straggling items * Fix 'make test:secure' * Enhance ARRAY_SIZE macro to reject acting on pointers The previous definition would not produce a diagnostic for ``` int *p; size_t num_elem = ARRAY_SIZE(p) ``` but the new one will. * explicitly get definition of ARRAY_SIZE * Convert to ARRAY_SIZE when const is involved The following spatch finds additional instances where the array is const and the division is by the size of the type, not the size of the first element: ``` @ rule5a using "empty.iso" @ type T; const T[] E; @@ - (sizeof(E)/sizeof(T)) + ARRAY_SIZE(E) @ rule6a using "empty.iso" @ type T; const T[] E; @@ - sizeof(E)/sizeof(T) + ARRAY_SIZE(E) ``` * New instances of ARRAY_SIZE added since initial spatch run * Use `ARRAY_SIZE` in docs (found by grep) * Manually use ARRAY_SIZE hs_set is expected to be the same size as uint16_t, though it's made of two 8-bit integers * Just like char, sizeof(uint8_t) is guaranteed to be 1 This is at least true on any plausible system where qmk is actually used. Per my understanding it's universally true, assuming that uint8_t exists: https://stackoverflow.com/questions/48655310/can-i-assume-that-sizeofuint8-t-1 * Run qmk-format on core C files touched in this branch Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
830 lines
46 KiB
C++
830 lines
46 KiB
C++
/* Copyright (C) 2012 Kristian Lauszus, TKJ Electronics. All rights reserved.
|
|
|
|
This software may be distributed and modified under the terms of the GNU
|
|
General Public License version 2 (GPL2) as published by the Free Software
|
|
Foundation and appearing in the file GPL2.TXT included in the packaging of
|
|
this file. Please note that GPL2 Section 2[b] requires that all works based
|
|
on this software must also be made publicly available under the terms of
|
|
the GPL2 ("Copyleft").
|
|
|
|
Contact information
|
|
-------------------
|
|
|
|
Kristian Lauszus, TKJ Electronics
|
|
Web : http://www.tkjelectronics.com
|
|
e-mail : kristianl@tkjelectronics.com
|
|
*/
|
|
|
|
#include "SPP.h"
|
|
// To enable serial debugging see "settings.h"
|
|
//#define EXTRADEBUG // Uncomment to get even more debugging data
|
|
//#define PRINTREPORT // Uncomment to print the report sent to the Arduino
|
|
|
|
/*
|
|
* CRC (reversed crc) lookup table as calculated by the table generator in ETSI TS 101 369 V6.3.0.
|
|
*/
|
|
const uint8_t rfcomm_crc_table[256] PROGMEM = {/* reversed, 8-bit, poly=0x07 */
|
|
0x00, 0x91, 0xE3, 0x72, 0x07, 0x96, 0xE4, 0x75, 0x0E, 0x9F, 0xED, 0x7C, 0x09, 0x98, 0xEA, 0x7B,
|
|
0x1C, 0x8D, 0xFF, 0x6E, 0x1B, 0x8A, 0xF8, 0x69, 0x12, 0x83, 0xF1, 0x60, 0x15, 0x84, 0xF6, 0x67,
|
|
0x38, 0xA9, 0xDB, 0x4A, 0x3F, 0xAE, 0xDC, 0x4D, 0x36, 0xA7, 0xD5, 0x44, 0x31, 0xA0, 0xD2, 0x43,
|
|
0x24, 0xB5, 0xC7, 0x56, 0x23, 0xB2, 0xC0, 0x51, 0x2A, 0xBB, 0xC9, 0x58, 0x2D, 0xBC, 0xCE, 0x5F,
|
|
0x70, 0xE1, 0x93, 0x02, 0x77, 0xE6, 0x94, 0x05, 0x7E, 0xEF, 0x9D, 0x0C, 0x79, 0xE8, 0x9A, 0x0B,
|
|
0x6C, 0xFD, 0x8F, 0x1E, 0x6B, 0xFA, 0x88, 0x19, 0x62, 0xF3, 0x81, 0x10, 0x65, 0xF4, 0x86, 0x17,
|
|
0x48, 0xD9, 0xAB, 0x3A, 0x4F, 0xDE, 0xAC, 0x3D, 0x46, 0xD7, 0xA5, 0x34, 0x41, 0xD0, 0xA2, 0x33,
|
|
0x54, 0xC5, 0xB7, 0x26, 0x53, 0xC2, 0xB0, 0x21, 0x5A, 0xCB, 0xB9, 0x28, 0x5D, 0xCC, 0xBE, 0x2F,
|
|
0xE0, 0x71, 0x03, 0x92, 0xE7, 0x76, 0x04, 0x95, 0xEE, 0x7F, 0x0D, 0x9C, 0xE9, 0x78, 0x0A, 0x9B,
|
|
0xFC, 0x6D, 0x1F, 0x8E, 0xFB, 0x6A, 0x18, 0x89, 0xF2, 0x63, 0x11, 0x80, 0xF5, 0x64, 0x16, 0x87,
|
|
0xD8, 0x49, 0x3B, 0xAA, 0xDF, 0x4E, 0x3C, 0xAD, 0xD6, 0x47, 0x35, 0xA4, 0xD1, 0x40, 0x32, 0xA3,
|
|
0xC4, 0x55, 0x27, 0xB6, 0xC3, 0x52, 0x20, 0xB1, 0xCA, 0x5B, 0x29, 0xB8, 0xCD, 0x5C, 0x2E, 0xBF,
|
|
0x90, 0x01, 0x73, 0xE2, 0x97, 0x06, 0x74, 0xE5, 0x9E, 0x0F, 0x7D, 0xEC, 0x99, 0x08, 0x7A, 0xEB,
|
|
0x8C, 0x1D, 0x6F, 0xFE, 0x8B, 0x1A, 0x68, 0xF9, 0x82, 0x13, 0x61, 0xF0, 0x85, 0x14, 0x66, 0xF7,
|
|
0xA8, 0x39, 0x4B, 0xDA, 0xAF, 0x3E, 0x4C, 0xDD, 0xA6, 0x37, 0x45, 0xD4, 0xA1, 0x30, 0x42, 0xD3,
|
|
0xB4, 0x25, 0x57, 0xC6, 0xB3, 0x22, 0x50, 0xC1, 0xBA, 0x2B, 0x59, 0xC8, 0xBD, 0x2C, 0x5E, 0xCF
|
|
};
|
|
|
|
SPP::SPP(BTD *p, const char* name, const char* pin) :
|
|
BluetoothService(p) // Pointer to BTD class instance - mandatory
|
|
{
|
|
pBtd->btdName = name;
|
|
pBtd->btdPin = pin;
|
|
|
|
/* Set device cid for the SDP and RFCOMM channelse */
|
|
sdp_dcid[0] = 0x50; // 0x0050
|
|
sdp_dcid[1] = 0x00;
|
|
rfcomm_dcid[0] = 0x51; // 0x0051
|
|
rfcomm_dcid[1] = 0x00;
|
|
|
|
Reset();
|
|
}
|
|
|
|
void SPP::Reset() {
|
|
connected = false;
|
|
RFCOMMConnected = false;
|
|
SDPConnected = false;
|
|
waitForLastCommand = false;
|
|
l2cap_sdp_state = L2CAP_SDP_WAIT;
|
|
l2cap_rfcomm_state = L2CAP_RFCOMM_WAIT;
|
|
l2cap_event_flag = 0;
|
|
sppIndex = 0;
|
|
creditSent = false;
|
|
}
|
|
|
|
void SPP::disconnect() {
|
|
connected = false;
|
|
// First the two L2CAP channels has to be disconnected and then the HCI connection
|
|
if(RFCOMMConnected)
|
|
pBtd->l2cap_disconnection_request(hci_handle, ++identifier, rfcomm_scid, rfcomm_dcid);
|
|
if(RFCOMMConnected && SDPConnected)
|
|
delay(1); // Add delay between commands
|
|
if(SDPConnected)
|
|
pBtd->l2cap_disconnection_request(hci_handle, ++identifier, sdp_scid, sdp_dcid);
|
|
l2cap_sdp_state = L2CAP_DISCONNECT_RESPONSE;
|
|
}
|
|
|
|
void SPP::ACLData(uint8_t* l2capinbuf) {
|
|
if(!connected) {
|
|
if(l2capinbuf[8] == L2CAP_CMD_CONNECTION_REQUEST) {
|
|
if((l2capinbuf[12] | (l2capinbuf[13] << 8)) == SDP_PSM && !pBtd->sdpConnectionClaimed) {
|
|
pBtd->sdpConnectionClaimed = true;
|
|
hci_handle = pBtd->hci_handle; // Store the HCI Handle for the connection
|
|
l2cap_sdp_state = L2CAP_SDP_WAIT; // Reset state
|
|
} else if((l2capinbuf[12] | (l2capinbuf[13] << 8)) == RFCOMM_PSM && !pBtd->rfcommConnectionClaimed) {
|
|
pBtd->rfcommConnectionClaimed = true;
|
|
hci_handle = pBtd->hci_handle; // Store the HCI Handle for the connection
|
|
l2cap_rfcomm_state = L2CAP_RFCOMM_WAIT; // Reset state
|
|
}
|
|
}
|
|
}
|
|
|
|
if(checkHciHandle(l2capinbuf, hci_handle)) { // acl_handle_ok
|
|
if((l2capinbuf[6] | (l2capinbuf[7] << 8)) == 0x0001U) { // l2cap_control - Channel ID for ACL-U
|
|
if(l2capinbuf[8] == L2CAP_CMD_COMMAND_REJECT) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nL2CAP Command Rejected - Reason: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[13], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[12], 0x80);
|
|
Notify(PSTR(" Data: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[17], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[16], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[15], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[14], 0x80);
|
|
#endif
|
|
} else if(l2capinbuf[8] == L2CAP_CMD_CONNECTION_REQUEST) {
|
|
#ifdef EXTRADEBUG
|
|
Notify(PSTR("\r\nL2CAP Connection Request - PSM: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[13], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[12], 0x80);
|
|
Notify(PSTR(" SCID: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[15], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[14], 0x80);
|
|
Notify(PSTR(" Identifier: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[9], 0x80);
|
|
#endif
|
|
if((l2capinbuf[12] | (l2capinbuf[13] << 8)) == SDP_PSM) { // It doesn't matter if it receives another reqeust, since it waits for the channel to disconnect in the L2CAP_SDP_DONE state, and the l2cap_event_flag will be cleared if so
|
|
identifier = l2capinbuf[9];
|
|
sdp_scid[0] = l2capinbuf[14];
|
|
sdp_scid[1] = l2capinbuf[15];
|
|
l2cap_set_flag(L2CAP_FLAG_CONNECTION_SDP_REQUEST);
|
|
} else if((l2capinbuf[12] | (l2capinbuf[13] << 8)) == RFCOMM_PSM) { // ----- || -----
|
|
identifier = l2capinbuf[9];
|
|
rfcomm_scid[0] = l2capinbuf[14];
|
|
rfcomm_scid[1] = l2capinbuf[15];
|
|
l2cap_set_flag(L2CAP_FLAG_CONNECTION_RFCOMM_REQUEST);
|
|
}
|
|
} else if(l2capinbuf[8] == L2CAP_CMD_CONFIG_RESPONSE) {
|
|
if((l2capinbuf[16] | (l2capinbuf[17] << 8)) == 0x0000) { // Success
|
|
if(l2capinbuf[12] == sdp_dcid[0] && l2capinbuf[13] == sdp_dcid[1]) {
|
|
//Notify(PSTR("\r\nSDP Configuration Complete"), 0x80);
|
|
l2cap_set_flag(L2CAP_FLAG_CONFIG_SDP_SUCCESS);
|
|
} else if(l2capinbuf[12] == rfcomm_dcid[0] && l2capinbuf[13] == rfcomm_dcid[1]) {
|
|
//Notify(PSTR("\r\nRFCOMM Configuration Complete"), 0x80);
|
|
l2cap_set_flag(L2CAP_FLAG_CONFIG_RFCOMM_SUCCESS);
|
|
}
|
|
}
|
|
} else if(l2capinbuf[8] == L2CAP_CMD_CONFIG_REQUEST) {
|
|
if(l2capinbuf[12] == sdp_dcid[0] && l2capinbuf[13] == sdp_dcid[1]) {
|
|
//Notify(PSTR("\r\nSDP Configuration Request"), 0x80);
|
|
pBtd->l2cap_config_response(hci_handle, l2capinbuf[9], sdp_scid);
|
|
} else if(l2capinbuf[12] == rfcomm_dcid[0] && l2capinbuf[13] == rfcomm_dcid[1]) {
|
|
//Notify(PSTR("\r\nRFCOMM Configuration Request"), 0x80);
|
|
pBtd->l2cap_config_response(hci_handle, l2capinbuf[9], rfcomm_scid);
|
|
}
|
|
} else if(l2capinbuf[8] == L2CAP_CMD_DISCONNECT_REQUEST) {
|
|
if(l2capinbuf[12] == sdp_dcid[0] && l2capinbuf[13] == sdp_dcid[1]) {
|
|
//Notify(PSTR("\r\nDisconnect Request: SDP Channel"), 0x80);
|
|
identifier = l2capinbuf[9];
|
|
l2cap_set_flag(L2CAP_FLAG_DISCONNECT_SDP_REQUEST);
|
|
} else if(l2capinbuf[12] == rfcomm_dcid[0] && l2capinbuf[13] == rfcomm_dcid[1]) {
|
|
//Notify(PSTR("\r\nDisconnect Request: RFCOMM Channel"), 0x80);
|
|
identifier = l2capinbuf[9];
|
|
l2cap_set_flag(L2CAP_FLAG_DISCONNECT_RFCOMM_REQUEST);
|
|
}
|
|
} else if(l2capinbuf[8] == L2CAP_CMD_DISCONNECT_RESPONSE) {
|
|
if(l2capinbuf[12] == sdp_scid[0] && l2capinbuf[13] == sdp_scid[1]) {
|
|
//Notify(PSTR("\r\nDisconnect Response: SDP Channel"), 0x80);
|
|
identifier = l2capinbuf[9];
|
|
l2cap_set_flag(L2CAP_FLAG_DISCONNECT_RESPONSE);
|
|
} else if(l2capinbuf[12] == rfcomm_scid[0] && l2capinbuf[13] == rfcomm_scid[1]) {
|
|
//Notify(PSTR("\r\nDisconnect Response: RFCOMM Channel"), 0x80);
|
|
identifier = l2capinbuf[9];
|
|
l2cap_set_flag(L2CAP_FLAG_DISCONNECT_RESPONSE);
|
|
}
|
|
} else if(l2capinbuf[8] == L2CAP_CMD_INFORMATION_REQUEST) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nInformation request"), 0x80);
|
|
#endif
|
|
identifier = l2capinbuf[9];
|
|
pBtd->l2cap_information_response(hci_handle, identifier, l2capinbuf[12], l2capinbuf[13]);
|
|
}
|
|
#ifdef EXTRADEBUG
|
|
else {
|
|
Notify(PSTR("\r\nL2CAP Unknown Signaling Command: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[8], 0x80);
|
|
}
|
|
#endif
|
|
} else if(l2capinbuf[6] == sdp_dcid[0] && l2capinbuf[7] == sdp_dcid[1]) { // SDP
|
|
if(l2capinbuf[8] == SDP_SERVICE_SEARCH_ATTRIBUTE_REQUEST_PDU) {
|
|
if(((l2capinbuf[16] << 8 | l2capinbuf[17]) == SERIALPORT_UUID) || ((l2capinbuf[16] << 8 | l2capinbuf[17]) == 0x0000 && (l2capinbuf[18] << 8 | l2capinbuf[19]) == SERIALPORT_UUID)) { // Check if it's sending the full UUID, see: https://www.bluetooth.org/Technical/AssignedNumbers/service_discovery.htm, we will just check the first four bytes
|
|
if(firstMessage) {
|
|
serialPortResponse1(l2capinbuf[9], l2capinbuf[10]);
|
|
firstMessage = false;
|
|
} else {
|
|
serialPortResponse2(l2capinbuf[9], l2capinbuf[10]); // Serialport continuation state
|
|
firstMessage = true;
|
|
}
|
|
} else if(((l2capinbuf[16] << 8 | l2capinbuf[17]) == L2CAP_UUID) || ((l2capinbuf[16] << 8 | l2capinbuf[17]) == 0x0000 && (l2capinbuf[18] << 8 | l2capinbuf[19]) == L2CAP_UUID)) {
|
|
if(firstMessage) {
|
|
l2capResponse1(l2capinbuf[9], l2capinbuf[10]);
|
|
firstMessage = false;
|
|
} else {
|
|
l2capResponse2(l2capinbuf[9], l2capinbuf[10]); // L2CAP continuation state
|
|
firstMessage = true;
|
|
}
|
|
} else
|
|
serviceNotSupported(l2capinbuf[9], l2capinbuf[10]); // The service is not supported
|
|
#ifdef EXTRADEBUG
|
|
Notify(PSTR("\r\nUUID: "), 0x80);
|
|
uint16_t uuid;
|
|
if((l2capinbuf[16] << 8 | l2capinbuf[17]) == 0x0000) // Check if it's sending the UUID as a 128-bit UUID
|
|
uuid = (l2capinbuf[18] << 8 | l2capinbuf[19]);
|
|
else // Short UUID
|
|
uuid = (l2capinbuf[16] << 8 | l2capinbuf[17]);
|
|
D_PrintHex<uint16_t > (uuid, 0x80);
|
|
|
|
Notify(PSTR("\r\nLength: "), 0x80);
|
|
uint16_t length = l2capinbuf[11] << 8 | l2capinbuf[12];
|
|
D_PrintHex<uint16_t > (length, 0x80);
|
|
Notify(PSTR("\r\nData: "), 0x80);
|
|
for(uint8_t i = 0; i < length; i++) {
|
|
D_PrintHex<uint8_t > (l2capinbuf[13 + i], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
}
|
|
#endif
|
|
}
|
|
#ifdef EXTRADEBUG
|
|
else {
|
|
Notify(PSTR("\r\nUnknown PDU: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[8], 0x80);
|
|
}
|
|
#endif
|
|
} else if(l2capinbuf[6] == rfcomm_dcid[0] && l2capinbuf[7] == rfcomm_dcid[1]) { // RFCOMM
|
|
rfcommChannel = l2capinbuf[8] & 0xF8;
|
|
rfcommDirection = l2capinbuf[8] & 0x04;
|
|
rfcommCommandResponse = l2capinbuf[8] & 0x02;
|
|
rfcommChannelType = l2capinbuf[9] & 0xEF;
|
|
rfcommPfBit = l2capinbuf[9] & 0x10;
|
|
|
|
if(rfcommChannel >> 3 != 0x00)
|
|
rfcommChannelConnection = rfcommChannel;
|
|
|
|
#ifdef EXTRADEBUG
|
|
Notify(PSTR("\r\nRFCOMM Channel: "), 0x80);
|
|
D_PrintHex<uint8_t > (rfcommChannel >> 3, 0x80);
|
|
Notify(PSTR(" Direction: "), 0x80);
|
|
D_PrintHex<uint8_t > (rfcommDirection >> 2, 0x80);
|
|
Notify(PSTR(" CommandResponse: "), 0x80);
|
|
D_PrintHex<uint8_t > (rfcommCommandResponse >> 1, 0x80);
|
|
Notify(PSTR(" ChannelType: "), 0x80);
|
|
D_PrintHex<uint8_t > (rfcommChannelType, 0x80);
|
|
Notify(PSTR(" PF_BIT: "), 0x80);
|
|
D_PrintHex<uint8_t > (rfcommPfBit, 0x80);
|
|
#endif
|
|
if(rfcommChannelType == RFCOMM_DISC) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nReceived Disconnect RFCOMM Command on channel: "), 0x80);
|
|
D_PrintHex<uint8_t > (rfcommChannel >> 3, 0x80);
|
|
#endif
|
|
connected = false;
|
|
sendRfcomm(rfcommChannel, rfcommDirection, rfcommCommandResponse, RFCOMM_UA, rfcommPfBit, rfcommbuf, 0x00); // UA Command
|
|
}
|
|
if(connected) {
|
|
/* Read the incoming message */
|
|
if(rfcommChannelType == RFCOMM_UIH && rfcommChannel == rfcommChannelConnection) {
|
|
uint8_t length = l2capinbuf[10] >> 1; // Get length
|
|
uint8_t offset = l2capinbuf[4] - length - 4; // Check if there is credit
|
|
if(checkFcs(&l2capinbuf[8], l2capinbuf[11 + length + offset])) {
|
|
uint8_t i = 0;
|
|
for(; i < length; i++) {
|
|
if(rfcommAvailable + i >= sizeof (rfcommDataBuffer)) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nWarning: Buffer is full!"), 0x80);
|
|
#endif
|
|
break;
|
|
}
|
|
rfcommDataBuffer[rfcommAvailable + i] = l2capinbuf[11 + i + offset];
|
|
}
|
|
rfcommAvailable += i;
|
|
#ifdef EXTRADEBUG
|
|
Notify(PSTR("\r\nRFCOMM Data Available: "), 0x80);
|
|
Notify(rfcommAvailable, 0x80);
|
|
if(offset) {
|
|
Notify(PSTR(" - Credit: 0x"), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[11], 0x80);
|
|
}
|
|
#endif
|
|
}
|
|
#ifdef DEBUG_USB_HOST
|
|
else
|
|
Notify(PSTR("\r\nError in FCS checksum!"), 0x80);
|
|
#endif
|
|
#ifdef PRINTREPORT // Uncomment "#define PRINTREPORT" to print the report send to the Arduino via Bluetooth
|
|
for(uint8_t i = 0; i < length; i++)
|
|
Notifyc(l2capinbuf[i + 11 + offset], 0x80);
|
|
#endif
|
|
} else if(rfcommChannelType == RFCOMM_UIH && l2capinbuf[11] == BT_RFCOMM_RPN_CMD) { // UIH Remote Port Negotiation Command
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nReceived UIH Remote Port Negotiation Command"), 0x80);
|
|
#endif
|
|
rfcommbuf[0] = BT_RFCOMM_RPN_RSP; // Command
|
|
rfcommbuf[1] = l2capinbuf[12]; // Length and shiftet like so: length << 1 | 1
|
|
rfcommbuf[2] = l2capinbuf[13]; // Channel: channel << 1 | 1
|
|
rfcommbuf[3] = l2capinbuf[14]; // Pre difined for Bluetooth, see 5.5.3 of TS 07.10 Adaption for RFCOMM
|
|
rfcommbuf[4] = l2capinbuf[15]; // Priority
|
|
rfcommbuf[5] = l2capinbuf[16]; // Timer
|
|
rfcommbuf[6] = l2capinbuf[17]; // Max Fram Size LSB
|
|
rfcommbuf[7] = l2capinbuf[18]; // Max Fram Size MSB
|
|
rfcommbuf[8] = l2capinbuf[19]; // MaxRatransm.
|
|
rfcommbuf[9] = l2capinbuf[20]; // Number of Frames
|
|
sendRfcomm(rfcommChannel, rfcommDirection, 0, RFCOMM_UIH, rfcommPfBit, rfcommbuf, 0x0A); // UIH Remote Port Negotiation Response
|
|
} else if(rfcommChannelType == RFCOMM_UIH && l2capinbuf[11] == BT_RFCOMM_MSC_CMD) { // UIH Modem Status Command
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nSend UIH Modem Status Response"), 0x80);
|
|
#endif
|
|
rfcommbuf[0] = BT_RFCOMM_MSC_RSP; // UIH Modem Status Response
|
|
rfcommbuf[1] = 2 << 1 | 1; // Length and shiftet like so: length << 1 | 1
|
|
rfcommbuf[2] = l2capinbuf[13]; // Channel: (1 << 0) | (1 << 1) | (0 << 2) | (channel << 3)
|
|
rfcommbuf[3] = l2capinbuf[14];
|
|
sendRfcomm(rfcommChannel, rfcommDirection, 0, RFCOMM_UIH, rfcommPfBit, rfcommbuf, 0x04);
|
|
}
|
|
} else {
|
|
if(rfcommChannelType == RFCOMM_SABM) { // SABM Command - this is sent twice: once for channel 0 and then for the channel to establish
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nReceived SABM Command"), 0x80);
|
|
#endif
|
|
sendRfcomm(rfcommChannel, rfcommDirection, rfcommCommandResponse, RFCOMM_UA, rfcommPfBit, rfcommbuf, 0x00); // UA Command
|
|
} else if(rfcommChannelType == RFCOMM_UIH && l2capinbuf[11] == BT_RFCOMM_PN_CMD) { // UIH Parameter Negotiation Command
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nReceived UIH Parameter Negotiation Command"), 0x80);
|
|
#endif
|
|
rfcommbuf[0] = BT_RFCOMM_PN_RSP; // UIH Parameter Negotiation Response
|
|
rfcommbuf[1] = l2capinbuf[12]; // Length and shiftet like so: length << 1 | 1
|
|
rfcommbuf[2] = l2capinbuf[13]; // Channel: channel << 1 | 1
|
|
rfcommbuf[3] = 0xE0; // Pre difined for Bluetooth, see 5.5.3 of TS 07.10 Adaption for RFCOMM
|
|
rfcommbuf[4] = 0x00; // Priority
|
|
rfcommbuf[5] = 0x00; // Timer
|
|
rfcommbuf[6] = BULK_MAXPKTSIZE - 14; // Max Fram Size LSB - set to the size of received data (50)
|
|
rfcommbuf[7] = 0x00; // Max Fram Size MSB
|
|
rfcommbuf[8] = 0x00; // MaxRatransm.
|
|
rfcommbuf[9] = 0x00; // Number of Frames
|
|
sendRfcomm(rfcommChannel, rfcommDirection, 0, RFCOMM_UIH, rfcommPfBit, rfcommbuf, 0x0A);
|
|
} else if(rfcommChannelType == RFCOMM_UIH && l2capinbuf[11] == BT_RFCOMM_MSC_CMD) { // UIH Modem Status Command
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nSend UIH Modem Status Response"), 0x80);
|
|
#endif
|
|
rfcommbuf[0] = BT_RFCOMM_MSC_RSP; // UIH Modem Status Response
|
|
rfcommbuf[1] = 2 << 1 | 1; // Length and shiftet like so: length << 1 | 1
|
|
rfcommbuf[2] = l2capinbuf[13]; // Channel: (1 << 0) | (1 << 1) | (0 << 2) | (channel << 3)
|
|
rfcommbuf[3] = l2capinbuf[14];
|
|
sendRfcomm(rfcommChannel, rfcommDirection, 0, RFCOMM_UIH, rfcommPfBit, rfcommbuf, 0x04);
|
|
|
|
delay(1);
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nSend UIH Modem Status Command"), 0x80);
|
|
#endif
|
|
rfcommbuf[0] = BT_RFCOMM_MSC_CMD; // UIH Modem Status Command
|
|
rfcommbuf[1] = 2 << 1 | 1; // Length and shiftet like so: length << 1 | 1
|
|
rfcommbuf[2] = l2capinbuf[13]; // Channel: (1 << 0) | (1 << 1) | (0 << 2) | (channel << 3)
|
|
rfcommbuf[3] = 0x8D; // Can receive frames (YES), Ready to Communicate (YES), Ready to Receive (YES), Incomig Call (NO), Data is Value (YES)
|
|
|
|
sendRfcomm(rfcommChannel, rfcommDirection, 0, RFCOMM_UIH, rfcommPfBit, rfcommbuf, 0x04);
|
|
} else if(rfcommChannelType == RFCOMM_UIH && l2capinbuf[11] == BT_RFCOMM_MSC_RSP) { // UIH Modem Status Response
|
|
if(!creditSent) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nSend UIH Command with credit"), 0x80);
|
|
#endif
|
|
sendRfcommCredit(rfcommChannelConnection, rfcommDirection, 0, RFCOMM_UIH, 0x10, sizeof (rfcommDataBuffer)); // Send credit
|
|
creditSent = true;
|
|
timer = millis();
|
|
waitForLastCommand = true;
|
|
}
|
|
} else if(rfcommChannelType == RFCOMM_UIH && l2capinbuf[10] == 0x01) { // UIH Command with credit
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nReceived UIH Command with credit"), 0x80);
|
|
#endif
|
|
} else if(rfcommChannelType == RFCOMM_UIH && l2capinbuf[11] == BT_RFCOMM_RPN_CMD) { // UIH Remote Port Negotiation Command
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nReceived UIH Remote Port Negotiation Command"), 0x80);
|
|
#endif
|
|
rfcommbuf[0] = BT_RFCOMM_RPN_RSP; // Command
|
|
rfcommbuf[1] = l2capinbuf[12]; // Length and shiftet like so: length << 1 | 1
|
|
rfcommbuf[2] = l2capinbuf[13]; // Channel: channel << 1 | 1
|
|
rfcommbuf[3] = l2capinbuf[14]; // Pre difined for Bluetooth, see 5.5.3 of TS 07.10 Adaption for RFCOMM
|
|
rfcommbuf[4] = l2capinbuf[15]; // Priority
|
|
rfcommbuf[5] = l2capinbuf[16]; // Timer
|
|
rfcommbuf[6] = l2capinbuf[17]; // Max Fram Size LSB
|
|
rfcommbuf[7] = l2capinbuf[18]; // Max Fram Size MSB
|
|
rfcommbuf[8] = l2capinbuf[19]; // MaxRatransm.
|
|
rfcommbuf[9] = l2capinbuf[20]; // Number of Frames
|
|
sendRfcomm(rfcommChannel, rfcommDirection, 0, RFCOMM_UIH, rfcommPfBit, rfcommbuf, 0x0A); // UIH Remote Port Negotiation Response
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nRFCOMM Connection is now established\r\n"), 0x80);
|
|
#endif
|
|
onInit();
|
|
}
|
|
#ifdef EXTRADEBUG
|
|
else if(rfcommChannelType != RFCOMM_DISC) {
|
|
Notify(PSTR("\r\nUnsupported RFCOMM Data - ChannelType: "), 0x80);
|
|
D_PrintHex<uint8_t > (rfcommChannelType, 0x80);
|
|
Notify(PSTR(" Command: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[11], 0x80);
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
#ifdef EXTRADEBUG
|
|
else {
|
|
Notify(PSTR("\r\nUnsupported L2CAP Data - Channel ID: "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[7], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
D_PrintHex<uint8_t > (l2capinbuf[6], 0x80);
|
|
}
|
|
#endif
|
|
SDP_task();
|
|
RFCOMM_task();
|
|
}
|
|
}
|
|
|
|
void SPP::Run() {
|
|
if(waitForLastCommand && (millis() - timer) > 100) { // We will only wait 100ms and see if the UIH Remote Port Negotiation Command is send, as some deviced don't send it
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nRFCOMM Connection is now established - Automatic\r\n"), 0x80);
|
|
#endif
|
|
onInit();
|
|
}
|
|
send(); // Send all bytes currently in the buffer
|
|
}
|
|
|
|
void SPP::onInit() {
|
|
creditSent = false;
|
|
waitForLastCommand = false;
|
|
connected = true; // The RFCOMM channel is now established
|
|
sppIndex = 0;
|
|
if(pFuncOnInit)
|
|
pFuncOnInit(); // Call the user function
|
|
};
|
|
|
|
void SPP::SDP_task() {
|
|
switch(l2cap_sdp_state) {
|
|
case L2CAP_SDP_WAIT:
|
|
if(l2cap_check_flag(L2CAP_FLAG_CONNECTION_SDP_REQUEST)) {
|
|
l2cap_clear_flag(L2CAP_FLAG_CONNECTION_SDP_REQUEST); // Clear flag
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nSDP Incoming Connection Request"), 0x80);
|
|
#endif
|
|
pBtd->l2cap_connection_response(hci_handle, identifier, sdp_dcid, sdp_scid, PENDING);
|
|
delay(1);
|
|
pBtd->l2cap_connection_response(hci_handle, identifier, sdp_dcid, sdp_scid, SUCCESSFUL);
|
|
identifier++;
|
|
delay(1);
|
|
pBtd->l2cap_config_request(hci_handle, identifier, sdp_scid);
|
|
l2cap_sdp_state = L2CAP_SDP_SUCCESS;
|
|
} else if(l2cap_check_flag(L2CAP_FLAG_DISCONNECT_SDP_REQUEST)) {
|
|
l2cap_clear_flag(L2CAP_FLAG_DISCONNECT_SDP_REQUEST); // Clear flag
|
|
SDPConnected = false;
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nDisconnected SDP Channel"), 0x80);
|
|
#endif
|
|
pBtd->l2cap_disconnection_response(hci_handle, identifier, sdp_dcid, sdp_scid);
|
|
}
|
|
break;
|
|
case L2CAP_SDP_SUCCESS:
|
|
if(l2cap_check_flag(L2CAP_FLAG_CONFIG_SDP_SUCCESS)) {
|
|
l2cap_clear_flag(L2CAP_FLAG_CONFIG_SDP_SUCCESS); // Clear flag
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nSDP Successfully Configured"), 0x80);
|
|
#endif
|
|
firstMessage = true; // Reset bool
|
|
SDPConnected = true;
|
|
l2cap_sdp_state = L2CAP_SDP_WAIT;
|
|
}
|
|
break;
|
|
|
|
case L2CAP_DISCONNECT_RESPONSE: // This is for both disconnection response from the RFCOMM and SDP channel if they were connected
|
|
if(l2cap_check_flag(L2CAP_FLAG_DISCONNECT_RESPONSE)) {
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nDisconnected L2CAP Connection"), 0x80);
|
|
#endif
|
|
pBtd->hci_disconnect(hci_handle);
|
|
hci_handle = -1; // Reset handle
|
|
Reset();
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
void SPP::RFCOMM_task() {
|
|
switch(l2cap_rfcomm_state) {
|
|
case L2CAP_RFCOMM_WAIT:
|
|
if(l2cap_check_flag(L2CAP_FLAG_CONNECTION_RFCOMM_REQUEST)) {
|
|
l2cap_clear_flag(L2CAP_FLAG_CONNECTION_RFCOMM_REQUEST); // Clear flag
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nRFCOMM Incoming Connection Request"), 0x80);
|
|
#endif
|
|
pBtd->l2cap_connection_response(hci_handle, identifier, rfcomm_dcid, rfcomm_scid, PENDING);
|
|
delay(1);
|
|
pBtd->l2cap_connection_response(hci_handle, identifier, rfcomm_dcid, rfcomm_scid, SUCCESSFUL);
|
|
identifier++;
|
|
delay(1);
|
|
pBtd->l2cap_config_request(hci_handle, identifier, rfcomm_scid);
|
|
l2cap_rfcomm_state = L2CAP_RFCOMM_SUCCESS;
|
|
} else if(l2cap_check_flag(L2CAP_FLAG_DISCONNECT_RFCOMM_REQUEST)) {
|
|
l2cap_clear_flag(L2CAP_FLAG_DISCONNECT_RFCOMM_REQUEST); // Clear flag
|
|
RFCOMMConnected = false;
|
|
connected = false;
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nDisconnected RFCOMM Channel"), 0x80);
|
|
#endif
|
|
pBtd->l2cap_disconnection_response(hci_handle, identifier, rfcomm_dcid, rfcomm_scid);
|
|
}
|
|
break;
|
|
case L2CAP_RFCOMM_SUCCESS:
|
|
if(l2cap_check_flag(L2CAP_FLAG_CONFIG_RFCOMM_SUCCESS)) {
|
|
l2cap_clear_flag(L2CAP_FLAG_CONFIG_RFCOMM_SUCCESS); // Clear flag
|
|
#ifdef DEBUG_USB_HOST
|
|
Notify(PSTR("\r\nRFCOMM Successfully Configured"), 0x80);
|
|
#endif
|
|
rfcommAvailable = 0; // Reset number of bytes available
|
|
bytesRead = 0; // Reset number of bytes received
|
|
RFCOMMConnected = true;
|
|
l2cap_rfcomm_state = L2CAP_RFCOMM_WAIT;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
/************************************************************/
|
|
/* SDP Commands */
|
|
|
|
/************************************************************/
|
|
void SPP::SDP_Command(uint8_t* data, uint8_t nbytes) { // See page 223 in the Bluetooth specs
|
|
pBtd->L2CAP_Command(hci_handle, data, nbytes, sdp_scid[0], sdp_scid[1]);
|
|
}
|
|
|
|
void SPP::serviceNotSupported(uint8_t transactionIDHigh, uint8_t transactionIDLow) { // See page 235 in the Bluetooth specs
|
|
l2capoutbuf[0] = SDP_SERVICE_SEARCH_ATTRIBUTE_RESPONSE_PDU;
|
|
l2capoutbuf[1] = transactionIDHigh;
|
|
l2capoutbuf[2] = transactionIDLow;
|
|
l2capoutbuf[3] = 0x00; // MSB Parameter Length
|
|
l2capoutbuf[4] = 0x05; // LSB Parameter Length = 5
|
|
l2capoutbuf[5] = 0x00; // MSB AttributeListsByteCount
|
|
l2capoutbuf[6] = 0x02; // LSB AttributeListsByteCount = 2
|
|
|
|
/* Attribute ID/Value Sequence: */
|
|
l2capoutbuf[7] = 0x35; // Data element sequence - length in next byte
|
|
l2capoutbuf[8] = 0x00; // Length = 0
|
|
l2capoutbuf[9] = 0x00; // No continuation state
|
|
|
|
SDP_Command(l2capoutbuf, 10);
|
|
}
|
|
|
|
void SPP::serialPortResponse1(uint8_t transactionIDHigh, uint8_t transactionIDLow) {
|
|
l2capoutbuf[0] = SDP_SERVICE_SEARCH_ATTRIBUTE_RESPONSE_PDU;
|
|
l2capoutbuf[1] = transactionIDHigh;
|
|
l2capoutbuf[2] = transactionIDLow;
|
|
l2capoutbuf[3] = 0x00; // MSB Parameter Length
|
|
l2capoutbuf[4] = 0x2B; // LSB Parameter Length = 43
|
|
l2capoutbuf[5] = 0x00; // MSB AttributeListsByteCount
|
|
l2capoutbuf[6] = 0x26; // LSB AttributeListsByteCount = 38
|
|
|
|
/* Attribute ID/Value Sequence: */
|
|
l2capoutbuf[7] = 0x36; // Data element sequence - length in next two bytes
|
|
l2capoutbuf[8] = 0x00; // MSB Length
|
|
l2capoutbuf[9] = 0x3C; // LSB Length = 60
|
|
|
|
l2capoutbuf[10] = 0x36; // Data element sequence - length in next two bytes
|
|
l2capoutbuf[11] = 0x00; // MSB Length
|
|
l2capoutbuf[12] = 0x39; // LSB Length = 57
|
|
|
|
l2capoutbuf[13] = 0x09; // Unsigned Integer - length 2 bytes
|
|
l2capoutbuf[14] = 0x00; // MSB ServiceRecordHandle
|
|
l2capoutbuf[15] = 0x00; // LSB ServiceRecordHandle
|
|
l2capoutbuf[16] = 0x0A; // Unsigned int - length 4 bytes
|
|
l2capoutbuf[17] = 0x00; // ServiceRecordHandle value - TODO: Is this related to HCI_Handle?
|
|
l2capoutbuf[18] = 0x01;
|
|
l2capoutbuf[19] = 0x00;
|
|
l2capoutbuf[20] = 0x06;
|
|
|
|
l2capoutbuf[21] = 0x09; // Unsigned Integer - length 2 bytes
|
|
l2capoutbuf[22] = 0x00; // MSB ServiceClassIDList
|
|
l2capoutbuf[23] = 0x01; // LSB ServiceClassIDList
|
|
l2capoutbuf[24] = 0x35; // Data element sequence - length in next byte
|
|
l2capoutbuf[25] = 0x03; // Length = 3
|
|
l2capoutbuf[26] = 0x19; // UUID (universally unique identifier) - length = 2 bytes
|
|
l2capoutbuf[27] = 0x11; // MSB SerialPort
|
|
l2capoutbuf[28] = 0x01; // LSB SerialPort
|
|
|
|
l2capoutbuf[29] = 0x09; // Unsigned Integer - length 2 bytes
|
|
l2capoutbuf[30] = 0x00; // MSB ProtocolDescriptorList
|
|
l2capoutbuf[31] = 0x04; // LSB ProtocolDescriptorList
|
|
l2capoutbuf[32] = 0x35; // Data element sequence - length in next byte
|
|
l2capoutbuf[33] = 0x0C; // Length = 12
|
|
|
|
l2capoutbuf[34] = 0x35; // Data element sequence - length in next byte
|
|
l2capoutbuf[35] = 0x03; // Length = 3
|
|
l2capoutbuf[36] = 0x19; // UUID (universally unique identifier) - length = 2 bytes
|
|
l2capoutbuf[37] = 0x01; // MSB L2CAP
|
|
l2capoutbuf[38] = 0x00; // LSB L2CAP
|
|
|
|
l2capoutbuf[39] = 0x35; // Data element sequence - length in next byte
|
|
l2capoutbuf[40] = 0x05; // Length = 5
|
|
l2capoutbuf[41] = 0x19; // UUID (universally unique identifier) - length = 2 bytes
|
|
l2capoutbuf[42] = 0x00; // MSB RFCOMM
|
|
l2capoutbuf[43] = 0x03; // LSB RFCOMM
|
|
l2capoutbuf[44] = 0x08; // Unsigned Integer - length 1 byte
|
|
|
|
l2capoutbuf[45] = 0x02; // ContinuationState - Two more bytes
|
|
l2capoutbuf[46] = 0x00; // MSB length
|
|
l2capoutbuf[47] = 0x19; // LSB length = 25 more bytes to come
|
|
|
|
SDP_Command(l2capoutbuf, 48);
|
|
}
|
|
|
|
void SPP::serialPortResponse2(uint8_t transactionIDHigh, uint8_t transactionIDLow) {
|
|
l2capoutbuf[0] = SDP_SERVICE_SEARCH_ATTRIBUTE_RESPONSE_PDU;
|
|
l2capoutbuf[1] = transactionIDHigh;
|
|
l2capoutbuf[2] = transactionIDLow;
|
|
l2capoutbuf[3] = 0x00; // MSB Parameter Length
|
|
l2capoutbuf[4] = 0x1C; // LSB Parameter Length = 28
|
|
l2capoutbuf[5] = 0x00; // MSB AttributeListsByteCount
|
|
l2capoutbuf[6] = 0x19; // LSB AttributeListsByteCount = 25
|
|
|
|
/* Attribute ID/Value Sequence: */
|
|
l2capoutbuf[7] = 0x01; // Channel 1 - TODO: Try different values, so multiple servers can be used at once
|
|
|
|
l2capoutbuf[8] = 0x09; // Unsigned Integer - length 2 bytes
|
|
l2capoutbuf[9] = 0x00; // MSB LanguageBaseAttributeIDList
|
|
l2capoutbuf[10] = 0x06; // LSB LanguageBaseAttributeIDList
|
|
l2capoutbuf[11] = 0x35; // Data element sequence - length in next byte
|
|
l2capoutbuf[12] = 0x09; // Length = 9
|
|
|
|
// Identifier representing the natural language = en = English - see: "ISO 639:1988"
|
|
l2capoutbuf[13] = 0x09; // Unsigned Integer - length 2 bytes
|
|
l2capoutbuf[14] = 0x65; // 'e'
|
|
l2capoutbuf[15] = 0x6E; // 'n'
|
|
|
|
// "The second element of each triplet contains an identifier that specifies a character encoding used for the language"
|
|
// Encoding is set to 106 (UTF-8) - see: http://www.iana.org/assignments/character-sets/character-sets.xhtml
|
|
l2capoutbuf[16] = 0x09; // Unsigned Integer - length 2 bytes
|
|
l2capoutbuf[17] = 0x00; // MSB of character encoding
|
|
l2capoutbuf[18] = 0x6A; // LSB of character encoding (106)
|
|
|
|
// Attribute ID that serves as the base attribute ID for the natural language in the service record
|
|
// "To facilitate the retrieval of human-readable universal attributes in a principal language, the base attribute ID value for the primary language supported by a service record shall be 0x0100"
|
|
l2capoutbuf[19] = 0x09; // Unsigned Integer - length 2 bytes
|
|
l2capoutbuf[20] = 0x01;
|
|
l2capoutbuf[21] = 0x00;
|
|
|
|
l2capoutbuf[22] = 0x09; // Unsigned Integer - length 2 bytes
|
|
l2capoutbuf[23] = 0x01; // MSB ServiceDescription
|
|
l2capoutbuf[24] = 0x00; // LSB ServiceDescription
|
|
|
|
l2capoutbuf[25] = 0x25; // Text string - length in next byte
|
|
l2capoutbuf[26] = 0x05; // Name length
|
|
l2capoutbuf[27] = 'T';
|
|
l2capoutbuf[28] = 'K';
|
|
l2capoutbuf[29] = 'J';
|
|
l2capoutbuf[30] = 'S';
|
|
l2capoutbuf[31] = 'P';
|
|
l2capoutbuf[32] = 0x00; // No continuation state
|
|
|
|
SDP_Command(l2capoutbuf, 33);
|
|
}
|
|
|
|
void SPP::l2capResponse1(uint8_t transactionIDHigh, uint8_t transactionIDLow) {
|
|
serialPortResponse1(transactionIDHigh, transactionIDLow); // These has to send all the supported functions, since it only supports virtual serialport it just sends the message again
|
|
}
|
|
|
|
void SPP::l2capResponse2(uint8_t transactionIDHigh, uint8_t transactionIDLow) {
|
|
serialPortResponse2(transactionIDHigh, transactionIDLow); // Same data as serialPortResponse2
|
|
}
|
|
/************************************************************/
|
|
/* RFCOMM Commands */
|
|
|
|
/************************************************************/
|
|
void SPP::RFCOMM_Command(uint8_t* data, uint8_t nbytes) {
|
|
pBtd->L2CAP_Command(hci_handle, data, nbytes, rfcomm_scid[0], rfcomm_scid[1]);
|
|
}
|
|
|
|
void SPP::sendRfcomm(uint8_t channel, uint8_t direction, uint8_t CR, uint8_t channelType, uint8_t pfBit, uint8_t* data, uint8_t length) {
|
|
l2capoutbuf[0] = channel | direction | CR | extendAddress; // RFCOMM Address
|
|
l2capoutbuf[1] = channelType | pfBit; // RFCOMM Control
|
|
l2capoutbuf[2] = length << 1 | 0x01; // Length and format (always 0x01 bytes format)
|
|
uint8_t i = 0;
|
|
for(; i < length; i++)
|
|
l2capoutbuf[i + 3] = data[i];
|
|
l2capoutbuf[i + 3] = calcFcs(l2capoutbuf);
|
|
#ifdef EXTRADEBUG
|
|
Notify(PSTR(" - RFCOMM Data: "), 0x80);
|
|
for(i = 0; i < length + 4; i++) {
|
|
D_PrintHex<uint8_t > (l2capoutbuf[i], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
}
|
|
#endif
|
|
RFCOMM_Command(l2capoutbuf, length + 4);
|
|
}
|
|
|
|
void SPP::sendRfcommCredit(uint8_t channel, uint8_t direction, uint8_t CR, uint8_t channelType, uint8_t pfBit, uint8_t credit) {
|
|
l2capoutbuf[0] = channel | direction | CR | extendAddress; // RFCOMM Address
|
|
l2capoutbuf[1] = channelType | pfBit; // RFCOMM Control
|
|
l2capoutbuf[2] = 0x01; // Length = 0
|
|
l2capoutbuf[3] = credit; // Credit
|
|
l2capoutbuf[4] = calcFcs(l2capoutbuf);
|
|
#ifdef EXTRADEBUG
|
|
Notify(PSTR(" - RFCOMM Credit Data: "), 0x80);
|
|
for(uint8_t i = 0; i < 5; i++) {
|
|
D_PrintHex<uint8_t > (l2capoutbuf[i], 0x80);
|
|
Notify(PSTR(" "), 0x80);
|
|
}
|
|
#endif
|
|
RFCOMM_Command(l2capoutbuf, 5);
|
|
}
|
|
|
|
/* CRC on 2 bytes */
|
|
uint8_t SPP::crc(uint8_t *data) {
|
|
return (pgm_read_byte(&rfcomm_crc_table[pgm_read_byte(&rfcomm_crc_table[0xFF ^ data[0]]) ^ data[1]]));
|
|
}
|
|
|
|
/* Calculate FCS */
|
|
uint8_t SPP::calcFcs(uint8_t *data) {
|
|
uint8_t temp = crc(data);
|
|
if((data[1] & 0xEF) == RFCOMM_UIH)
|
|
return (0xFF - temp); // FCS on 2 bytes
|
|
else
|
|
return (0xFF - pgm_read_byte(&rfcomm_crc_table[temp ^ data[2]])); // FCS on 3 bytes
|
|
}
|
|
|
|
/* Check FCS */
|
|
bool SPP::checkFcs(uint8_t *data, uint8_t fcs) {
|
|
uint8_t temp = crc(data);
|
|
if((data[1] & 0xEF) != RFCOMM_UIH)
|
|
temp = pgm_read_byte(&rfcomm_crc_table[temp ^ data[2]]); // FCS on 3 bytes
|
|
return (pgm_read_byte(&rfcomm_crc_table[temp ^ fcs]) == 0xCF);
|
|
}
|
|
|
|
/* Serial commands */
|
|
#if defined(ARDUINO) && ARDUINO >=100
|
|
|
|
size_t SPP::write(uint8_t data) {
|
|
return write(&data, 1);
|
|
}
|
|
#else
|
|
|
|
void SPP::write(uint8_t data) {
|
|
write(&data, 1);
|
|
}
|
|
#endif
|
|
|
|
#if defined(ARDUINO) && ARDUINO >=100
|
|
|
|
size_t SPP::write(const uint8_t *data, size_t size) {
|
|
#else
|
|
|
|
void SPP::write(const uint8_t *data, size_t size) {
|
|
#endif
|
|
for(uint8_t i = 0; i < size; i++) {
|
|
if(sppIndex >= ARRAY_SIZE(sppOutputBuffer))
|
|
send(); // Send the current data in the buffer
|
|
sppOutputBuffer[sppIndex++] = data[i]; // All the bytes are put into a buffer and then send using the send() function
|
|
}
|
|
#if defined(ARDUINO) && ARDUINO >=100
|
|
return size;
|
|
#endif
|
|
}
|
|
|
|
void SPP::send() {
|
|
if(!connected || !sppIndex)
|
|
return;
|
|
uint8_t length; // This is the length of the string we are sending
|
|
uint8_t offset = 0; // This is used to keep track of where we are in the string
|
|
|
|
l2capoutbuf[0] = rfcommChannelConnection | 0 | 0 | extendAddress; // RFCOMM Address
|
|
l2capoutbuf[1] = RFCOMM_UIH; // RFCOMM Control
|
|
|
|
while(sppIndex) { // We will run this while loop until this variable is 0
|
|
if(sppIndex > (sizeof (l2capoutbuf) - 4)) // Check if the string is larger than the outgoing buffer
|
|
length = sizeof (l2capoutbuf) - 4;
|
|
else
|
|
length = sppIndex;
|
|
|
|
l2capoutbuf[2] = length << 1 | 1; // Length
|
|
uint8_t i = 0;
|
|
for(; i < length; i++)
|
|
l2capoutbuf[i + 3] = sppOutputBuffer[i + offset];
|
|
l2capoutbuf[i + 3] = calcFcs(l2capoutbuf); // Calculate checksum
|
|
|
|
RFCOMM_Command(l2capoutbuf, length + 4);
|
|
|
|
sppIndex -= length;
|
|
offset += length; // Increment the offset
|
|
}
|
|
}
|
|
|
|
int SPP::available(void) {
|
|
return rfcommAvailable;
|
|
};
|
|
|
|
void SPP::discard(void) {
|
|
rfcommAvailable = 0;
|
|
}
|
|
|
|
int SPP::peek(void) {
|
|
if(rfcommAvailable == 0) // Don't read if there is nothing in the buffer
|
|
return -1;
|
|
return rfcommDataBuffer[0];
|
|
}
|
|
|
|
int SPP::read(void) {
|
|
if(rfcommAvailable == 0) // Don't read if there is nothing in the buffer
|
|
return -1;
|
|
uint8_t output = rfcommDataBuffer[0];
|
|
for(uint8_t i = 1; i < rfcommAvailable; i++)
|
|
rfcommDataBuffer[i - 1] = rfcommDataBuffer[i]; // Shift the buffer one left
|
|
rfcommAvailable--;
|
|
bytesRead++;
|
|
if(bytesRead > (sizeof (rfcommDataBuffer) - 5)) { // We will send the command just before it runs out of credit
|
|
bytesRead = 0;
|
|
sendRfcommCredit(rfcommChannelConnection, rfcommDirection, 0, RFCOMM_UIH, 0x10, sizeof (rfcommDataBuffer)); // Send more credit
|
|
#ifdef EXTRADEBUG
|
|
Notify(PSTR("\r\nSent "), 0x80);
|
|
Notify((uint8_t)sizeof (rfcommDataBuffer), 0x80);
|
|
Notify(PSTR(" more credit"), 0x80);
|
|
#endif
|
|
}
|
|
return output;
|
|
}
|