forked from forks/qmk_firmware
27 lines
1.2 KiB
Markdown
27 lines
1.2 KiB
Markdown
# Macro3
|
|
|
|
|
|
|
|
Macro3 is a low-profile macro pad with dual encoder support designed by [@davidphilipbarr](https://github.com/davidphilipbarr).
|
|
|
|
## Keyboard Info
|
|
|
|
* Keyboard Maintainer: [filterpaper](https://github.com/filterpaper), [davidphilipbarr](https://github.com/davidphilipbarr)
|
|
* Hardware Supported: [Macro3](https://github.com/davidphilipbarr/Macropads/tree/main/macro3)
|
|
* Hardware Availability: order PCBs with gerber file from the repository
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make macro3:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the top right key and plug in the controller.
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is configured.
|
|
* **Physical reset pins**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material.
|
|
|