1
0
Fork 0
forked from forks/qmk_firmware
qmk_firmware/keyboards/mechlovin/kay65
Ryan 363bfdbfda
Move RGBLIGHT_LIMIT_VAL to data driven (#20974)
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-05-27 12:27:44 +10:00
..
keymaps VIA Protocol 12 + fixes (#19916) 2023-02-23 09:19:00 +11:00
config.h Move RGBLIGHT_LIMIT_VAL to data driven (#20974) 2023-05-27 12:27:44 +10:00
info.json Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
kay65.c Move 65% layouts to data driven (#20308) 2023-04-04 15:20:10 +10:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

Kay65

Kay65

A 65% PCB with centered USB, RGB underglow and top right LED.

Make example for this keyboard (after setting up your build environment):

make mechlovin/kay65:default

Flashing example for this keyboard:

make mechlovin/kay65:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available