History

Ryan 2da0827d4f Remove matrix size defines (#19581 )		2023-02-17 16:08:25 +11:00
..
keymaps	Remove legacy keycodes, part 5 (#18710 )	2022-10-15 22:29:43 +01:00
chconf.h	Rework as per 9824 (#13898 )	2021-08-06 08:14:43 +10:00
config.h	Remove matrix size defines (#19581 )	2023-02-17 16:08:25 +11:00
halconf.h	Rework as per 9824 (#13898 )	2021-08-06 08:14:43 +10:00
info.json	Move LED indicator config to data driven (#19800 )	2023-02-17 13:14:29 +11:00
ixora.c	Rework as per 9824 (#13898 )	2021-08-06 08:14:43 +10:00
ixora.h	Rework as per 9824 (#13898 )	2021-08-06 08:14:43 +10:00
readme.md	RESET -> QK_BOOT keyboard readme (#18110 )	2022-08-20 11:34:17 +01:00
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00

readme.md

Ixora

Ixora is an ARM-powered 6-key macropad with a USB connector, hotswap sockets, and indicator LEDs.

Keyboard Maintainer: Coarse
Hardware Supported: Ixora PCB
Hardware Availability: Coarse

Make example for this keyboard (after setting up your build environment):

make coarse/ixora:default

See build environment setup then the make instructions for more information.

Developer's Note

STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a QK_BOOT keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a QK_BOOT keycode).