varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/darkproject/kd87a_bfg_edition
History
Ryan 65a04ead32
LED drivers: update keyboard LED configs (#23073) 
* IS31FL3733: update keyboard LED config

* IS31FL3736: update keyboard LED config

* IS31FL3737: update keyboard LED config

* IS31FL3741: update keyboard LED config

* IS31FL3743A: update keyboard LED config

* AW20216S: update keyboard LED config

* SNLED27351: update keyboard LED config
2024-02-25 21:29:37 +00:00
..
keymaps
config.h AW20216S: combine EN pin defines (#23067) 2024-02-15 07:05:08 +00:00
halconf.h
info.json Migrate RGB Matrix config to info.json - D (#22811) 2024-01-07 13:36:14 +00:00
kd87a_bfg_edition.c LED drivers: update keyboard LED configs (#23073) 2024-02-25 21:29:37 +00:00
kd87a_bfg_edition.h
mcuconf.h
readme.md
rules.mk Migrate some EEPROM config to info.json (#22434) 2023-11-14 09:30:19 +11:00

readme.md

KD87A_BFG_Edition

KD87A_BFG_Edition

An 87 keys keyboard, Equipped with the WestBerry Q95 microcontroller.

  • Keyboard Maintainer: GSKY
  • Hardware Supported: KD87A_BFG_Edition
  • Hardware Availability: GSKY GitHub

Make example for this keyboard (after setting up your build environment):

make darkproject/kd87a_bfg_edition:default

Flashing example for this keyboard:

make darkproject/kd87a_bfg_edition:default:flash

To reset the board into bootloader mode, do one of the following:

  • Hold the Reset switch mounted on the surface of the PCB back side after the USB cable is connected
  • Hold the Escape key while connecting the USB cable (also erases persistent settings)
  • Fn+ESC will reset the board to bootloader mode

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.