1
0
Fork 0
forked from forks/qmk_firmware
qmk_firmware/keyboards/input_club/ergodox_infinity/config.h

91 lines
2.7 KiB
C
Raw Normal View History

/*
Copyright 2015 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define MOUSEKEY_INTERVAL 20
#define MOUSEKEY_DELAY 0
#define MOUSEKEY_TIME_TO_MAX 60
#define MOUSEKEY_MAX_SPEED 7
#define MOUSEKEY_WHEEL_DELAY 0
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
)
/* Serial config (for communication between halves) */
#define SERIAL_USART_DRIVER SD1 // Only true for the master half
#define SERIAL_USART_CONFIG { (SERIAL_USART_SPEED), } // Only field is speed
#define SERIAL_USART_FULL_DUPLEX
#define LED_BRIGHTNESS_LO 100
#define LED_BRIGHTNESS_HI 255
/* LED matrix driver */
#define IS31FL3731_I2C_ADDRESS_1 IS31FL3731_I2C_ADDRESS_GND
#define IS31FL3731_SDB_PIN B16
/* i2c (for LED matrix) */
#define I2C1_CLOCK_SPEED 400000
#define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2
#define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATIVE_2
#define I2C1_SCL_PIN B0
#define I2C1_SDA_PIN B1
#ifdef ST7565_ENABLE
/* LCD driver */
# define ST7565_A0_PIN C7
# define ST7565_RST_PIN C8
# define ST7565_SS_PIN C4
# define ST7565_SPI_CLK_DIVISOR 2
# define ST7565_CONTRAST 22
# define ST7565_DISPLAY_WIDTH 128
# define ST7565_DISPLAY_HEIGHT 32
/* SPI (for LCD) */
# define SPI_DRIVER SPID1
# define SPI_SCK_PIN C5
# define SPI_SCK_PAL_MODE PAL_MODE_ALTERNATIVE_2
# define SPI_MOSI_PIN C6
# define SPI_MOSI_PAL_MODE PAL_MODE_ALTERNATIVE_2
# define SPI_MISO_PIN A4 // Just an unused pin, the "normal" MISO pin (C7) is used for other things
# define SPI_MISO_PAL_MODE PAL_MODE_ALTERNATIVE_7 // Default for A4
#endif
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT