forked from forks/qmk_firmware
42 lines
2 KiB
Markdown
42 lines
2 KiB
Markdown
|
# Junco <!-- omit from toc -->
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
Junco is a 60% Raspberry Pi Pico powered split keyboard boasting a 4x6 layout with an aggressive columnar stagger. It has 5 "thumb" keys on either side, support for 2-4 rotary encoders, and per-key RGB lighting.
|
||
|
|
|
||
|
|
- Keyboard Maintainer: [Dane Skalski](https://github.com/Daneski13)
|
||
|
|
- Hardware Supported: Junco PCB, Raspberry Pi Pico
|
||
|
|
- Hardware Availability: [PCB, Case, Parts List](https://github.com/Daneski13/Junco)
|
||
|
|
|
||
|
|
Remember you have to flash both halves of the keyboard for it to work!
|
||
|
|
|
||
|
|
Make example for this keyboard (after setting up your build environment):
|
||
|
|
|
||
|
|
make junco:default
|
||
|
|
|
||
|
|
Flashing example for this keyboard:
|
||
|
|
|
||
|
|
```bash
|
||
|
|
# For flashing the left half...
|
||
|
|
make junco:default:uf2-split-left
|
||
|
|
# or the qmk cli equivalent:
|
||
|
|
qmk flash -kb junco --keymap default -bl uf2-split-left
|
||
|
|
|
||
|
|
# For flashing the right half...
|
||
|
|
make junco:default:uf2-split-right
|
||
|
|
# or the qmk cli equivalent:
|
||
|
|
qmk flash -kb junco --keymap default -bl uf2-split-right
|
||
|
|
```
|
||
|
|
|
||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
|
|
||
|
|
## Bootloader <!-- omit from toc -->
|
||
|
|
|
||
|
|
Enter the bootloader in 3 ways:
|
||
|
|
|
||
|
|
- **Bootmagic reset** (works after you have flashed once): Hold down the top far corner key while plugging in the keyboard (`~` left half, `-` right half). This will also clear the EEPROM.
|
||
|
|
- **Physical reset button**: Hold the `BOOT` button on the Pico and press the `RST` button on the Pico, release the the `RST` button before the `BOOT` button.
|
||
|
|
- **Keycode in layout**: In the default layout, the `Bootloader` keycode is above home row pinky on the right side's adjust layer.
|
||
|
|
|
||
|
|
Once you enter the bootloader, the keyboard will show up as a USB device on your computer, you could drag and drop a firmware file to flash it, but I recommend using the flash commands for the respective side.
|