#define IS_COMMAND() (get_mods() == MOD_MASK_CTRL) //debug commands accessed by holding down both CTRLs: https://github.com/qmk/qmk_firmware/blob/master/docs/feature_command.md
#endif
// Caps Word configuration
#define BOTH_SHIFTS_TURNS_ON_CAPS_WORD
#define CAPS_WORD_IDLE_TIMEOUT 10000 // Automatically turn off after x milliseconds of idle. 0 to never timeout.
#undef ENABLE_RGB_MATRIX_DUAL_BEACON // Two rainbows spinning around keyboard (distracting, busy)
#undef ENABLE_RGB_MATRIX_RAINDROPS // Sustained raindrops of blue, green, yellow (confusing to use with RGB layers)
//#undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Sustained raindrops of blue, purple, pink, green (confusing to use with RGB layers, but slightly better than above)
#undef ENABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight amount at the same time, then shifts back (very subtle)
#undef ENABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight amount in a wave to the right, then back to the left (very subtle)
#undef ENABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight amount and then back down in a wave to the right (very subtle)
//#undef ENABLE_RGB_MATRIX_PIXEL_RAIN // Non-sustained raindrops of pastel colors
#undef ENABLE_RGB_MATRIX_PIXEL_FLOW // More active version of pixel rain with quick cycling (unusable, very distracting)
#undef ENABLE_RGB_MATRIX_PIXEL_FRACTAL // Same as Pixel Flow but with current HSV only (somewhat distracting)
//Only enabled if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
//#undef ENABLE_RGB_MATRIX_TYPING_HEATMAP // Fading heatmap that follows keystrokes (has buggy side LEDs that glow red)
//#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN // The Matrix (has buggy side LEDs that glow red)
//Only enabled if RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Key hits shown in current hue - all other keys black
//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE // Keyboard lights up in chosen hue, key hits shown in complementary hue (try this as default?)
#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse around a single key hit then fades value out (Single key)
//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // same as above but more intense (Multi-key)
#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Column and Row single current color fade (Single key)
//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Column and Row single color fade. (Multi-key)
#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of key hit then fades (Single key)
//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multi-key hit then fades
//#undef ENABLE_RGB_MATRIX_SPLASH // Full rainbow pulses from key hit. All else black.
#undef ENABLE_RGB_MATRIX_MULTISPLASH // Full rainbow pulses from multi-keys. All else black. (distracting on multiple keystroke hits)
#undef ENABLE_RGB_MATRIX_SOLID_SPLASH // Single color pulses from key hit. All else black. (distracting on multiple key hits)
//#undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Single color pulses from muli-keys. All else black.
#define MOUSEKEY_MAX_SPEED 9 // Maximum cursor speed at which acceleration stops (default: 10)
#define MOUSEKEY_TIME_TO_MAX 150 // Time until maximum cursor speed is reached (default: 30)
#define MOUSEKEY_WHEEL_DELAY 0 // Delay between pressing a wheel key and wheel movement (default: 10)
#define MOUSEKEY_WHEEL_INTERVAL 80 // Time between wheel movements (default: 80)
#define MOUSEKEY_WHEEL_MAX_SPEED 8 // Maximum number of scroll steps per scroll action (default: 8)
#define MOUSEKEY_WHEEL_TIME_TO_MAX 40 // Time until maximum scroll speed is reached (default: 40)
*/
// Mouse Keys Kinetic Mode Definitions
#define MK_KINETIC_SPEED // Enable Kinetic mode: Uses a quadratic curve on cursor speed to allow precise movements at the beginning and increases speed thereafter.
#define MOUSEKEY_DELAY 3 // Delay between pressing a movement key and cursor movement (default: 10)
#define MOUSEKEY_INTERVAL 13 // Time between cursor movements in milliseconds (default: 20); Try setting to 1000/monitor refresh for smooth movement.
#define MOUSEKEY_MOVE_DELTA 5 // Step size for accelerating from initial to base speed (default: 8)
#define MOUSEKEY_MOVE_MAX 50 // use instead of BASE SPEED to limit speed in Kinetic mode
#define MOUSEKEY_INITIAL_SPEED 100 // Initial speed of the cursor in pixels per second (default: 100)
//#define MOUSEKEY_BASE_SPEED 800 // (broken in QMK 0.16.0) Maximum cursor speed at which acceleration stops (default: 1000)
