forked from forks/qmk_firmware
25 lines
1.3 KiB
Markdown
25 lines
1.3 KiB
Markdown
|
# Krush60
|
||
|
|
|
||
|
|
A 60% keyboard sold in several variants.
|
||
|
|
|
||
|
|
1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush60" with krush keyboard case. Compatible with some 60% case, Singa, Bakeneko.
|
||
|
|
|
||
|
|
**Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board.
|
||
|
|
|
||
|
|
* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan)
|
||
|
|
* Hardware Supported: Krush60, SINGA, Bakeneko, 60% traymount case
|
||
|
|
* Hardware Availability: [Mechkey.store](https://mechkey.store/)
|
||
|
|
|
||
|
|
Make examples for this keyboard (after setting up your build environment):
|
||
|
|
|
||
|
|
make sawnsprojects/krush/krush60/solder:default
|
||
|
|
|
||
|
|
## Bootloader
|
||
|
|
|
||
|
|
Enter the bootloader in 3 ways:
|
||
|
|
|
||
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
||
|
|
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|
||
|
|
|
||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|