forked from forks/qmk_firmware
30 lines
1.2 KiB
Markdown
30 lines
1.2 KiB
Markdown
|
Techkeys SixKeyBoard
|
||
|
|
===
|
||
|
|
|
||
|
|
Keyboard Maintainer: QMK Community
|
||
|
|
Hardware Supported: Techkeys SixKeyBoard PCB
|
||
|
|
Hardware Availability: [Techkeys](http://techkeys.us/collections/accessories/products/sixkeyboard)
|
||
|
|
|
||
|
|
Make example for this keyboard (after setting up your build environment):
|
||
|
|
|
||
|
|
make sixkeyboard:semicolonsnet
|
||
|
|
|
||
|
|
See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
|
||
|
|
|
||
|
|
## Hardware Info
|
||
|
|
|
||
|
|
The schematic is like this:
|
||
|
|
|
||
|
|
```
|
||
|
|
switches leds
|
||
|
|
,--+--+--. ,--+--+--.
|
||
|
|
|C7|B7|B5| |C6|B6|B4|
|
||
|
|
+--+--+--+ +--+--+--+
|
||
|
|
|D6|D1|D4| |D5|D2|D3|
|
||
|
|
`--+--+--' `--+--+--'
|
||
|
|
```
|
||
|
|
|
||
|
|
The LED on the bottom is `C4`. All 7 of the leds are turned on when the keyboard boots-up in the `sixkeyboard.c` file - backlight_enable is not required. The MCU is an Atmega16u2, so the flash memory is limited to 0x3000 bytes - the current setup uses just about all of that! I'm sure things can be opitimised a bit.
|
||
|
|
|
||
|
|
There is a jumper on the bottom of the board (next to the USB port) that serves as a reset button - I drilled a hole in my case to allow for quick access via a screwdriver/metal object.
|