varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/quantum/config_common.h

418 lines
15 KiB
C
Raw Normal View History

Add support for Atmega32A to pin declarations and universal matrix (#4015) * add computed pins from mcu type * update for atmega32a * doc typo * add atmega16 chips, link to references * remove avr include from config * exclude assembler in config.h includes * consolodate options, add 646 * fix typo in pindef
2018-11-02 17:31:40 +01:00
/* Copyright 2015-2018 Jack Humbert
Clarify the quantum license (#1042) * Clarify the license for files we have signoff on * Update against the currently signed off files * Remove unused and not clearly licensed headers * Replace an #endif I accidentally removed while resolving merge conflicts
2017-03-29 00:20:36 +02:00
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
Add support for Atmega32A to pin declarations and universal matrix (#4015) * add computed pins from mcu type * update for atmega32a * doc typo * add atmega16 chips, link to references * remove avr include from config * exclude assembler in config.h includes * consolodate options, add 646 * fix typo in pindef
2018-11-02 17:31:40 +01:00
#pragma once
added ergodox
2015-10-26 21:32:37 +01:00
Optimize matrix scanning (#343)
2016-05-24 05:42:21 +02:00
/* diode directions */
clang-format changes
2019-08-30 20:19:03 +02:00
#define COL2ROW 0
#define ROW2COL 1
Add new DIODE_DIRECTION option The previous two options were COL2ROW, ROW2COL; this adds CUSTOM_MATRIX to disable the built-in matrix scanning code. Most notably, this obviates the need to set MATRIX_ROW_PINS or MATRIX_COL_PINS.
2017-02-06 01:42:00 +01:00
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
// useful for direct pin mapping
Miscellaneous cleanups (#8639) * Miscellaneous cleanups * Cast NO_PIN
2020-04-01 16:49:45 +02:00
#define NO_PIN (pin_t)(~0)
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
Adds support for Planck Rev 6 (#2666) * initial files for rev 6 with encoder * music map init, dip scan added * adds ws2812 driver for arm * flesh out dip and encoder support * adds default encoder res * adds default encoder res * start muse implementation * muse working with encoder as control * flip direction * try mouse wheel again * dont break other revs * dont break other revs * conditional autio * pwm ws driver (not working) * update build includes for chibios * update ws2812 driver/config * last commit for glasser code * working example * remove rgb for now * finish up rev6 * working encoder keycodes * add warnings to planck keymaps about the LAYOUT
2018-07-16 17:48:31 +02:00
#ifdef __AVR__
clang-format changes
2019-08-30 20:19:03 +02:00
# ifndef __ASSEMBLER__
# include <avr/io.h>
# endif
# define PORT_SHIFTER 4 // this may be 4 for all AVR chips
Add support for Atmega32A to pin declarations and universal matrix (#4015) * add computed pins from mcu type * update for atmega32a * doc typo * add atmega16 chips, link to references * remove avr include from config * exclude assembler in config.h includes * consolodate options, add 646 * fix typo in pindef
2018-11-02 17:31:40 +01:00
clang-format changes
2019-08-30 20:19:03 +02:00
// If you want to add more to this list, reference the PINx definitions in these header
// files: https://github.com/vancegroup-mirrors/avr-libc/tree/master/avr-libc/include/avr
Add support for Atmega32A to pin declarations and universal matrix (#4015) * add computed pins from mcu type * update for atmega32a * doc typo * add atmega16 chips, link to references * remove avr include from config * exclude assembler in config.h includes * consolodate options, add 646 * fix typo in pindef
2018-11-02 17:31:40 +01:00
clang-format changes
2019-08-30 20:19:03 +02:00
# if defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__)
# define ADDRESS_BASE 0x00
# define PINB_ADDRESS 0x3
# define PINC_ADDRESS 0x6
# define PIND_ADDRESS 0x9
# define PINE_ADDRESS 0xC
# define PINF_ADDRESS 0xF
Adds AT90USB162 support (#11570) * at90usb162 support * fix missing bracket * Apply suggestions from code review Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2021-01-30 04:53:56 +01:00
# elif defined(__AVR_AT90USB162__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)
clang-format changes
2019-08-30 20:19:03 +02:00
# define ADDRESS_BASE 0x00
# define PINB_ADDRESS 0x3
# define PINC_ADDRESS 0x6
# define PIND_ADDRESS 0x9
Add logic for AT90USBxx7 where needed (#10203)
2020-09-27 12:33:03 +02:00
# elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
clang-format changes
2019-08-30 20:19:03 +02:00
# define ADDRESS_BASE 0x00
# define PINA_ADDRESS 0x0
# define PINB_ADDRESS 0x3
# define PINC_ADDRESS 0x6
# define PIND_ADDRESS 0x9
# define PINE_ADDRESS 0xC
# define PINF_ADDRESS 0xF
# elif defined(__AVR_ATmega32A__)
# define ADDRESS_BASE 0x10
# define PIND_ADDRESS 0x0
# define PINC_ADDRESS 0x3
# define PINB_ADDRESS 0x6
# define PINA_ADDRESS 0x9
Initial support for ATtiny85 (#8632) * Initial support for ATtiny85 * Update mcu selection
2020-04-02 23:23:57 +02:00
# elif defined(__AVR_ATtiny85__)
# define ADDRESS_BASE 0x10
# define PINB_ADDRESS 0x6
clang-format changes
2019-08-30 20:19:03 +02:00
# else
# error "Pins are not defined"
# endif
Add support for Atmega32A to pin declarations and universal matrix (#4015) * add computed pins from mcu type * update for atmega32a * doc typo * add atmega16 chips, link to references * remove avr include from config * exclude assembler in config.h includes * consolodate options, add 646 * fix typo in pindef
2018-11-02 17:31:40 +01:00
clang-format changes
2019-08-30 20:19:03 +02:00
/* I/O pins */
# define PINDEF(port, pin) ((PIN##port##_ADDRESS << PORT_SHIFTER) | pin)
Add support for Atmega32A to pin declarations and universal matrix (#4015) * add computed pins from mcu type * update for atmega32a * doc typo * add atmega16 chips, link to references * remove avr include from config * exclude assembler in config.h includes * consolodate options, add 646 * fix typo in pindef
2018-11-02 17:31:40 +01:00
clang-format changes
2019-08-30 20:19:03 +02:00
# ifdef PORTA
# define A0 PINDEF(A, 0)
# define A1 PINDEF(A, 1)
# define A2 PINDEF(A, 2)
# define A3 PINDEF(A, 3)
# define A4 PINDEF(A, 4)
# define A5 PINDEF(A, 5)
# define A6 PINDEF(A, 6)
# define A7 PINDEF(A, 7)
# endif
# ifdef PORTB
# define B0 PINDEF(B, 0)
# define B1 PINDEF(B, 1)
# define B2 PINDEF(B, 2)
# define B3 PINDEF(B, 3)
# define B4 PINDEF(B, 4)
# define B5 PINDEF(B, 5)
# define B6 PINDEF(B, 6)
# define B7 PINDEF(B, 7)
# endif
# ifdef PORTC
# define C0 PINDEF(C, 0)
# define C1 PINDEF(C, 1)
# define C2 PINDEF(C, 2)
# define C3 PINDEF(C, 3)
# define C4 PINDEF(C, 4)
# define C5 PINDEF(C, 5)
# define C6 PINDEF(C, 6)
# define C7 PINDEF(C, 7)
# endif
# ifdef PORTD
# define D0 PINDEF(D, 0)
# define D1 PINDEF(D, 1)
# define D2 PINDEF(D, 2)
# define D3 PINDEF(D, 3)
# define D4 PINDEF(D, 4)
# define D5 PINDEF(D, 5)
# define D6 PINDEF(D, 6)
# define D7 PINDEF(D, 7)
# endif
# ifdef PORTE
# define E0 PINDEF(E, 0)
# define E1 PINDEF(E, 1)
# define E2 PINDEF(E, 2)
# define E3 PINDEF(E, 3)
# define E4 PINDEF(E, 4)
# define E5 PINDEF(E, 5)
# define E6 PINDEF(E, 6)
# define E7 PINDEF(E, 7)
# endif
# ifdef PORTF
# define F0 PINDEF(F, 0)
# define F1 PINDEF(F, 1)
# define F2 PINDEF(F, 2)
# define F3 PINDEF(F, 3)
# define F4 PINDEF(F, 4)
# define F5 PINDEF(F, 5)
# define F6 PINDEF(F, 6)
# define F7 PINDEF(F, 7)
# endif
Add support for Atmega32A to pin declarations and universal matrix (#4015) * add computed pins from mcu type * update for atmega32a * doc typo * add atmega16 chips, link to references * remove avr include from config * exclude assembler in config.h includes * consolodate options, add 646 * fix typo in pindef
2018-11-02 17:31:40 +01:00
clang-format changes
2019-08-30 20:19:03 +02:00
# ifndef __ASSEMBLER__
Ensure setPinInput actually sets input high-Z (#6237) * Ensure setPinInput actually sets input high-z * Fixed _PIN_ADDRESS Macro arguments as recommended by vomindoraan * Fixed instances of setInput to use new behavour * Changed kmac matrix to use input with pullups * Update keyboards/gh60/revc/revc.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fixed input state for unselect_rows * fixed merge conflict * Updated all instances of older uses of setPinInput() * Fixed naming mistake Co-authored-by: fauxpark <fauxpark@gmail.com>
2020-01-27 05:04:39 +01:00
# define _PIN_ADDRESS(p, offset) _SFR_IO8(ADDRESS_BASE + ((p) >> PORT_SHIFTER) + (offset))
clang-format changes
2019-08-30 20:19:03 +02:00
// Port X Input Pins Address
# define PINx_ADDRESS(p) _PIN_ADDRESS(p, 0)
// Port X Data Direction Register, 0:input 1:output
# define DDRx_ADDRESS(p) _PIN_ADDRESS(p, 1)
// Port X Data Register
# define PORTx_ADDRESS(p) _PIN_ADDRESS(p, 2)
# endif
AVR GPIO macro defines more readable (#5937) * A little easier to read the definition of the GPIO control macro for AVR. No change in build result. * Changed to not use GNU statement expression extension. No change in build result. * Modified split_common/serial.c to use qmk_firmware standard GPIO control macro. No change in build result. * fix PE6 -> E6 * remove some space * add some comment to config_common.h * Changed split_common/serial.c to use a newer version of qmk_firmware standard GPIO control macro.
2019-08-22 02:10:47 +02:00
Update quantum matrix to support both AVR and Chibios ARM (#3968) * Update quantum matrix to support both AVR and Chibios ARM - Addition of STM32 pin definitions - Created abstruction layer defines to control GPIO (This is a bit pointless for Chibios as we are creating a PAL ontop of a PAL but it is necessary for uniformity with AVR) - Modified matrix.c to use the above functions * minor ifdef fix * Rename of functions and docs - Added documentation. - Renamed functions according to Jack's spec. * Massdrop fix * Update matrix.c * Update quantum.h * Update quantum.h * Update quantum.h * Update internals_gpio_control.md
2018-09-28 18:33:11 +02:00
#elif defined(PROTOCOL_CHIBIOS)
clang-format changes
2019-08-30 20:19:03 +02:00
// Defines mapping for Proton C replacement
# ifdef CONVERT_TO_PROTON_C
// Left side (front)
# define D3 PAL_LINE(GPIOA, 9)
# define D2 PAL_LINE(GPIOA, 10)
// GND
// GND
# define D1 PAL_LINE(GPIOB, 7)
# define D0 PAL_LINE(GPIOB, 6)
# define D4 PAL_LINE(GPIOB, 5)
# define C6 PAL_LINE(GPIOB, 4)
# define D7 PAL_LINE(GPIOB, 3)
# define E6 PAL_LINE(GPIOB, 2)
# define B4 PAL_LINE(GPIOB, 1)
# define B5 PAL_LINE(GPIOB, 0)
Adds Proton C Conversion (#4661) * adds proton c base * fixes custom matrix include * adds readme.md * initial proton coversion, no pin mapping * start of mcu selection * add pin mapping and sweet16 test * add at90 to list * disable backlight, fix d7 * update flag names * doc updates * proton c update for mcu selection
2019-01-10 17:22:57 +01:00
clang-format changes
2019-08-30 20:19:03 +02:00
// Right side (front)
// RAW
// GND
// RESET
// VCC
# define F4 PAL_LINE(GPIOA, 2)
# define F5 PAL_LINE(GPIOA, 1)
# define F6 PAL_LINE(GPIOA, 0)
# define F7 PAL_LINE(GPIOB, 8)
# define B1 PAL_LINE(GPIOB, 13)
# define B3 PAL_LINE(GPIOB, 14)
# define B2 PAL_LINE(GPIOB, 15)
# define B6 PAL_LINE(GPIOB, 9)
Adds Proton C Conversion (#4661) * adds proton c base * fixes custom matrix include * adds readme.md * initial proton coversion, no pin mapping * start of mcu selection * add pin mapping and sweet16 test * add at90 to list * disable backlight, fix d7 * update flag names * doc updates * proton c update for mcu selection
2019-01-10 17:22:57 +01:00
clang-format changes
2019-08-30 20:19:03 +02:00
// LEDs (only D5/C13 uses an actual LED)
# ifdef CONVERT_TO_PROTON_C_RXLED
Fix CONVERT_TO_PROTON_C_RXLED pins (#7007)
2019-10-11 13:11:47 +02:00
# define D5 PAL_LINE(GPIOC, 14)
clang-format changes
2019-08-30 20:19:03 +02:00
# define B0 PAL_LINE(GPIOC, 13)
# else
# define D5 PAL_LINE(GPIOC, 13)
# define B0 PAL_LINE(GPIOC, 14)
# endif
# else
# define A0 PAL_LINE(GPIOA, 0)
# define A1 PAL_LINE(GPIOA, 1)
# define A2 PAL_LINE(GPIOA, 2)
# define A3 PAL_LINE(GPIOA, 3)
# define A4 PAL_LINE(GPIOA, 4)
# define A5 PAL_LINE(GPIOA, 5)
# define A6 PAL_LINE(GPIOA, 6)
# define A7 PAL_LINE(GPIOA, 7)
# define A8 PAL_LINE(GPIOA, 8)
# define A9 PAL_LINE(GPIOA, 9)
# define A10 PAL_LINE(GPIOA, 10)
# define A11 PAL_LINE(GPIOA, 11)
# define A12 PAL_LINE(GPIOA, 12)
# define A13 PAL_LINE(GPIOA, 13)
# define A14 PAL_LINE(GPIOA, 14)
# define A15 PAL_LINE(GPIOA, 15)
# define B0 PAL_LINE(GPIOB, 0)
# define B1 PAL_LINE(GPIOB, 1)
# define B2 PAL_LINE(GPIOB, 2)
# define B3 PAL_LINE(GPIOB, 3)
# define B4 PAL_LINE(GPIOB, 4)
# define B5 PAL_LINE(GPIOB, 5)
# define B6 PAL_LINE(GPIOB, 6)
# define B7 PAL_LINE(GPIOB, 7)
# define B8 PAL_LINE(GPIOB, 8)
# define B9 PAL_LINE(GPIOB, 9)
# define B10 PAL_LINE(GPIOB, 10)
# define B11 PAL_LINE(GPIOB, 11)
# define B12 PAL_LINE(GPIOB, 12)
# define B13 PAL_LINE(GPIOB, 13)
# define B14 PAL_LINE(GPIOB, 14)
# define B15 PAL_LINE(GPIOB, 15)
# define B16 PAL_LINE(GPIOB, 16)
# define B17 PAL_LINE(GPIOB, 17)
K-Type refactor (#9864) * K-Type refactor * Declare QMK in product name again * Hopefully fix matrix scanning * Maybe this time * Partial (literally) RGB Matrix support * Put RGB_MATRIX_ENABLE into rgb keymap for now * Add ifdefs for RGB config * Set layer 1 to actually be layer 1... * Update keyboards/k_type/readme.md * Put all RGB config in keymap for now * Set SDB high? * Before `rgb_matrix_init()` would be best * User level, not keyboard * Combating dropped keys * Nope * Readme for RGB keymap * Remove custom matrix
2020-08-26 10:41:32 +02:00
# define B18 PAL_LINE(GPIOB, 18)
# define B19 PAL_LINE(GPIOB, 19)
clang-format changes
2019-08-30 20:19:03 +02:00
# define C0 PAL_LINE(GPIOC, 0)
# define C1 PAL_LINE(GPIOC, 1)
# define C2 PAL_LINE(GPIOC, 2)
# define C3 PAL_LINE(GPIOC, 3)
# define C4 PAL_LINE(GPIOC, 4)
# define C5 PAL_LINE(GPIOC, 5)
# define C6 PAL_LINE(GPIOC, 6)
# define C7 PAL_LINE(GPIOC, 7)
# define C8 PAL_LINE(GPIOC, 8)
# define C9 PAL_LINE(GPIOC, 9)
# define C10 PAL_LINE(GPIOC, 10)
# define C11 PAL_LINE(GPIOC, 11)
# define C12 PAL_LINE(GPIOC, 12)
# define C13 PAL_LINE(GPIOC, 13)
# define C14 PAL_LINE(GPIOC, 14)
# define C15 PAL_LINE(GPIOC, 15)
# define D0 PAL_LINE(GPIOD, 0)
# define D1 PAL_LINE(GPIOD, 1)
# define D2 PAL_LINE(GPIOD, 2)
# define D3 PAL_LINE(GPIOD, 3)
# define D4 PAL_LINE(GPIOD, 4)
# define D5 PAL_LINE(GPIOD, 5)
# define D6 PAL_LINE(GPIOD, 6)
# define D7 PAL_LINE(GPIOD, 7)
# define D8 PAL_LINE(GPIOD, 8)
# define D9 PAL_LINE(GPIOD, 9)
# define D10 PAL_LINE(GPIOD, 10)
# define D11 PAL_LINE(GPIOD, 11)
# define D12 PAL_LINE(GPIOD, 12)
# define D13 PAL_LINE(GPIOD, 13)
# define D14 PAL_LINE(GPIOD, 14)
# define D15 PAL_LINE(GPIOD, 15)
# define E0 PAL_LINE(GPIOE, 0)
# define E1 PAL_LINE(GPIOE, 1)
# define E2 PAL_LINE(GPIOE, 2)
# define E3 PAL_LINE(GPIOE, 3)
# define E4 PAL_LINE(GPIOE, 4)
# define E5 PAL_LINE(GPIOE, 5)
# define E6 PAL_LINE(GPIOE, 6)
# define E7 PAL_LINE(GPIOE, 7)
# define E8 PAL_LINE(GPIOE, 8)
# define E9 PAL_LINE(GPIOE, 9)
# define E10 PAL_LINE(GPIOE, 10)
# define E11 PAL_LINE(GPIOE, 11)
# define E12 PAL_LINE(GPIOE, 12)
# define E13 PAL_LINE(GPIOE, 13)
# define E14 PAL_LINE(GPIOE, 14)
# define E15 PAL_LINE(GPIOE, 15)
# define F0 PAL_LINE(GPIOF, 0)
# define F1 PAL_LINE(GPIOF, 1)
# define F2 PAL_LINE(GPIOF, 2)
# define F3 PAL_LINE(GPIOF, 3)
# define F4 PAL_LINE(GPIOF, 4)
# define F5 PAL_LINE(GPIOF, 5)
# define F6 PAL_LINE(GPIOF, 6)
# define F7 PAL_LINE(GPIOF, 7)
# define F8 PAL_LINE(GPIOF, 8)
# define F9 PAL_LINE(GPIOF, 9)
# define F10 PAL_LINE(GPIOF, 10)
# define F11 PAL_LINE(GPIOF, 11)
# define F12 PAL_LINE(GPIOF, 12)
# define F13 PAL_LINE(GPIOF, 13)
# define F14 PAL_LINE(GPIOF, 14)
# define F15 PAL_LINE(GPIOF, 15)
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-28 21:02:18 +01:00
# define G0 PAL_LINE(GPIOG, 0)
# define G1 PAL_LINE(GPIOG, 1)
# define G2 PAL_LINE(GPIOG, 2)
# define G3 PAL_LINE(GPIOG, 3)
# define G4 PAL_LINE(GPIOG, 4)
# define G5 PAL_LINE(GPIOG, 5)
# define G6 PAL_LINE(GPIOG, 6)
# define G7 PAL_LINE(GPIOG, 7)
# define G8 PAL_LINE(GPIOG, 8)
# define G9 PAL_LINE(GPIOG, 9)
# define G10 PAL_LINE(GPIOG, 10)
# define G11 PAL_LINE(GPIOG, 11)
# define G12 PAL_LINE(GPIOG, 12)
# define G13 PAL_LINE(GPIOG, 13)
# define G14 PAL_LINE(GPIOG, 14)
# define G15 PAL_LINE(GPIOG, 15)
# define H0 PAL_LINE(GPIOH, 0)
# define H1 PAL_LINE(GPIOH, 1)
# define H2 PAL_LINE(GPIOH, 2)
# define H3 PAL_LINE(GPIOH, 3)
# define H4 PAL_LINE(GPIOH, 4)
# define H5 PAL_LINE(GPIOH, 5)
# define H6 PAL_LINE(GPIOH, 6)
# define H7 PAL_LINE(GPIOH, 7)
# define H8 PAL_LINE(GPIOH, 8)
# define H9 PAL_LINE(GPIOH, 9)
# define H10 PAL_LINE(GPIOH, 10)
# define H11 PAL_LINE(GPIOH, 11)
# define H12 PAL_LINE(GPIOH, 12)
# define H13 PAL_LINE(GPIOH, 13)
# define H14 PAL_LINE(GPIOH, 14)
# define H15 PAL_LINE(GPIOH, 15)
# define I0 PAL_LINE(GPIOI, 0)
# define I1 PAL_LINE(GPIOI, 1)
# define I2 PAL_LINE(GPIOI, 2)
# define I3 PAL_LINE(GPIOI, 3)
# define I4 PAL_LINE(GPIOI, 4)
# define I5 PAL_LINE(GPIOI, 5)
# define I6 PAL_LINE(GPIOI, 6)
# define I7 PAL_LINE(GPIOI, 7)
# define I8 PAL_LINE(GPIOI, 8)
# define I9 PAL_LINE(GPIOI, 9)
# define I10 PAL_LINE(GPIOI, 10)
# define I11 PAL_LINE(GPIOI, 11)
# define I12 PAL_LINE(GPIOI, 12)
# define I13 PAL_LINE(GPIOI, 13)
# define I14 PAL_LINE(GPIOI, 14)
# define I15 PAL_LINE(GPIOI, 15)
# define J0 PAL_LINE(GPIOJ, 0)
# define J1 PAL_LINE(GPIOJ, 1)
# define J2 PAL_LINE(GPIOJ, 2)
# define J3 PAL_LINE(GPIOJ, 3)
# define J4 PAL_LINE(GPIOJ, 4)
# define J5 PAL_LINE(GPIOJ, 5)
# define J6 PAL_LINE(GPIOJ, 6)
# define J7 PAL_LINE(GPIOJ, 7)
# define J8 PAL_LINE(GPIOJ, 8)
# define J9 PAL_LINE(GPIOJ, 9)
# define J10 PAL_LINE(GPIOJ, 10)
# define J11 PAL_LINE(GPIOJ, 11)
# define J12 PAL_LINE(GPIOJ, 12)
# define J13 PAL_LINE(GPIOJ, 13)
# define J14 PAL_LINE(GPIOJ, 14)
# define J15 PAL_LINE(GPIOJ, 15)
// Keyboards can `#define KEYBOARD_REQUIRES_GPIOK` if they need to access GPIO-K pins. These conflict with a whole
// bunch of layout definitions, so it's intentionally left out unless absolutely required -- in that case, the
// keyboard designer should use a different symbol when defining their layout macros.
# ifdef KEYBOARD_REQUIRES_GPIOK
# define K0 PAL_LINE(GPIOK, 0)
# define K1 PAL_LINE(GPIOK, 1)
# define K2 PAL_LINE(GPIOK, 2)
# define K3 PAL_LINE(GPIOK, 3)
# define K4 PAL_LINE(GPIOK, 4)
# define K5 PAL_LINE(GPIOK, 5)
# define K6 PAL_LINE(GPIOK, 6)
# define K7 PAL_LINE(GPIOK, 7)
# define K8 PAL_LINE(GPIOK, 8)
# define K9 PAL_LINE(GPIOK, 9)
# define K10 PAL_LINE(GPIOK, 10)
# define K11 PAL_LINE(GPIOK, 11)
# define K12 PAL_LINE(GPIOK, 12)
# define K13 PAL_LINE(GPIOK, 13)
# define K14 PAL_LINE(GPIOK, 14)
# define K15 PAL_LINE(GPIOK, 15)
# endif
clang-format changes
2019-08-30 20:19:03 +02:00
# endif
cleaning up midid
2016-11-22 02:14:16 +01:00
#endif
added ergodox
2015-10-26 21:32:37 +01:00
Optimize matrix scanning (#343)
2016-05-24 05:42:21 +02:00
/* USART configuration */
added ergodox
2015-10-26 21:32:37 +01:00
#ifdef BLUETOOTH_ENABLE
clang-format changes
2019-08-30 20:19:03 +02:00
# ifdef __AVR_ATmega32U4__
# define SERIAL_UART_BAUD 9600
# define SERIAL_UART_DATA UDR1
# define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1)
# define SERIAL_UART_RXD_VECT USART1_RX_vect
# define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
# define SERIAL_UART_INIT() \
do { \
/* baud rate */ \
UBRR1L = SERIAL_UART_UBRR; \
/* baud rate */ \
UBRR1H = SERIAL_UART_UBRR >> 8; \
/* enable TX */ \
UCSR1B = _BV(TXEN1); \
/* 8-bit data */ \
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
sei(); \
} while (0)
Add logic for AT90USBxx7 where needed (#10203)
2020-09-27 12:33:03 +02:00
# elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__)
Run clang-format manually to fix recently changed files
2019-11-17 15:02:26 +01:00
# define SERIAL_UART_BAUD 115200
# define SERIAL_UART_DATA UDR1
/* UBRR should result in ~16 and set UCSR1A = _BV(U2X1) as per rn42 documentation. HC05 needs baudrate configured accordingly */
# define SERIAL_UART_UBRR (F_CPU / (8UL * SERIAL_UART_BAUD) - 1)
# define SERIAL_UART_RXD_VECT USART1_RX_vect
# define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
# define SERIAL_UART_INIT() \
do { \
UCSR1A = _BV(U2X1); \
/* baud rate */ \
UBRR1L = SERIAL_UART_UBRR; \
/* baud rate */ \
UBRR1H = SERIAL_UART_UBRR >> 8; \
/* enable TX */ \
UCSR1B = _BV(TXEN1); \
/* 8-bit data */ \
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
sei(); \
} while (0)
clang-format changes
2019-08-30 20:19:03 +02:00
# else
# error "USART configuration is needed."
# endif
added ergodox
2015-10-26 21:32:37 +01:00
#endif
API Sysex fixes Fix memory leaks by using stack instead of malloc Reduce memory usage by having less temporary bufffers Remove warnings by adding includes Decrease code size by 608 bytes (mostly due to not linking malloc) More robust handling of buffer overflows
2016-12-29 11:13:30 +01:00
#define API_SYSEX_MAX_SIZE 32
clean-up planck and preonic keymaps, move audio stuff around
2017-07-21 05:57:11 +02:00
#include "song_list.h"
Copy permalink