varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/doro67/multi/rules.mk

25 lines
935 B
Makefile
Raw Normal View History

Remove bootloader listings from rules.mk (#14330)
2021-09-10 05:35:46 +02:00
# MCU name
[Keyboard] Doro67 Multi PCB port (#5539) * Initial portover of the doro68.json with corrected column pins. * Initial setup of LAYOUT_ansi and it's use in the default keymap. * Added F keys to default kemap on layer 1. * Added split space (and everything else) layout and a base keymap to be updated. * Renamed split_space to multi. * Changed product_id for doro. * Created a basic doro LAYOUT_iso and default keymap. * Copied over basic layout and keymap. * Added readme.md for doro67 multi. * Removed basic keyboad layout and keymap because it's a separate PCB. * Added backlight controls to the various keymaps. * Added explicit backlight pin define. * Increased number of backlight levels for flexibility. * Removed unnecessary line slashes and unified keymcaps. * Corrected ISO layout and switched position with multi. * Added keymap readme.md files. * Corrected ISO keymap. * Added Layouts to info.json for toolbox. * Re-added slashes as they were necessary here... * Corrected info.json/keymap discreptancies. * Updated copyright messages (and fixed small readme error). * Added missing line break spaces in readme.md Co-Authored-By: ShadeDream <nick@shadedream.com> * Keymap alignments on default_multi readme.md Co-Authored-By: ShadeDream <nick@shadedream.com> * Keymap alignments on default_multi readme.md Co-Authored-By: ShadeDream <nick@shadedream.com> * Keymap alignments on default_multi readme.md Co-Authored-By: ShadeDream <nick@shadedream.com> * Small alignment adjustment on the default keymap readme.md Co-Authored-By: ShadeDream <nick@shadedream.com>
2019-04-04 07:54:30 +02:00
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
Remove Full Bootmagic (#13846) * disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + ``` * update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta
2021-08-07 08:59:56 +02:00
BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite
Trim firmware sizes from default rules.mk, part 1 (#8027) * Removed reference to firmware size in 0-9,a-f board-level and default keymap 'rules.mk' files * Correct some 'rules.mk' in boards buried under vendor folders * PR8027 patch Co-authored-by: GeorgeKoenig <35542036+GeorgeKoenig@users.noreply.github.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-01-29 18:51:25 +01:00
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
[Keyboard] Doro67 Multi PCB port (#5539) * Initial portover of the doro68.json with corrected column pins. * Initial setup of LAYOUT_ansi and it's use in the default keymap. * Added F keys to default kemap on layer 1. * Added split space (and everything else) layout and a base keymap to be updated. * Renamed split_space to multi. * Changed product_id for doro. * Created a basic doro LAYOUT_iso and default keymap. * Copied over basic layout and keymap. * Added readme.md for doro67 multi. * Removed basic keyboad layout and keymap because it's a separate PCB. * Added backlight controls to the various keymaps. * Added explicit backlight pin define. * Increased number of backlight levels for flexibility. * Removed unnecessary line slashes and unified keymcaps. * Corrected ISO layout and switched position with multi. * Added keymap readme.md files. * Corrected ISO keymap. * Added Layouts to info.json for toolbox. * Re-added slashes as they were necessary here... * Corrected info.json/keymap discreptancies. * Updated copyright messages (and fixed small readme error). * Added missing line break spaces in readme.md Co-Authored-By: ShadeDream <nick@shadedream.com> * Keymap alignments on default_multi readme.md Co-Authored-By: ShadeDream <nick@shadedream.com> * Keymap alignments on default_multi readme.md Co-Authored-By: ShadeDream <nick@shadedream.com> * Keymap alignments on default_multi readme.md Co-Authored-By: ShadeDream <nick@shadedream.com> * Small alignment adjustment on the default keymap readme.md Co-Authored-By: ShadeDream <nick@shadedream.com>
2019-04-04 07:54:30 +02:00
COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
Remove backlight pin references in rules.mk (#14513)
2021-09-20 08:51:00 +02:00
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
[Keyboard] Doro67 Multi PCB port (#5539) * Initial portover of the doro68.json with corrected column pins. * Initial setup of LAYOUT_ansi and it's use in the default keymap. * Added F keys to default kemap on layer 1. * Added split space (and everything else) layout and a base keymap to be updated. * Renamed split_space to multi. * Changed product_id for doro. * Created a basic doro LAYOUT_iso and default keymap. * Copied over basic layout and keymap. * Added readme.md for doro67 multi. * Removed basic keyboad layout and keymap because it's a separate PCB. * Added backlight controls to the various keymaps. * Added explicit backlight pin define. * Increased number of backlight levels for flexibility. * Removed unnecessary line slashes and unified keymcaps. * Corrected ISO layout and switched position with multi. * Added keymap readme.md files. * Corrected ISO keymap. * Added Layouts to info.json for toolbox. * Re-added slashes as they were necessary here... * Corrected info.json/keymap discreptancies. * Updated copyright messages (and fixed small readme error). * Added missing line break spaces in readme.md Co-Authored-By: ShadeDream <nick@shadedream.com> * Keymap alignments on default_multi readme.md Co-Authored-By: ShadeDream <nick@shadedream.com> * Keymap alignments on default_multi readme.md Co-Authored-By: ShadeDream <nick@shadedream.com> * Keymap alignments on default_multi readme.md Co-Authored-By: ShadeDream <nick@shadedream.com> * Small alignment adjustment on the default keymap readme.md Co-Authored-By: ShadeDream <nick@shadedream.com>
2019-04-04 07:54:30 +02:00
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode
Remove audio pin references in rules.mk (#14532)
2021-09-21 12:04:03 +02:00
AUDIO_ENABLE = no # Audio output
[Keyboard] 65_ansi_blocker support for Doro67 (#6791) * rename LAYOUT to LAYOUT_65_blocker_ansi * rename LAYOUT macro * enable LAYOUT_65_blocker_ansi community layout support and remove uneeded lines of code * rename LAYOUT to LAYOUT_65_blocker_ansi * rename LAYOUT macro * enable LAYOUT_65_blocker_ansi community layout support * enable LAYOUT_65_blocker_ansi support * fix rename mess up * add QMK Configurator support with the new rename * rename blocker_ansi to ansi_blocker as it rolls off the tongue easier
2019-09-24 00:56:24 +02:00
Cleanup rules.mk for 32U4 keyboards, A-F (#6804) * Cleanup rules.mk for 32U4 keyboards, A-F * Put back stuff in VIA keymaps
2019-10-05 20:09:35 +02:00
LAYOUTS = 65_ansi_blocker
Copy permalink