1
0
Fork 0
forked from forks/qmk_firmware
qmk_firmware/keyboards/kprepublic/bm60hsrgb_iso/rev2/config.h

103 lines
3.8 KiB
C
Raw Normal View History

/* Copyright 2021 bdtc123
* Copyright 2021 sigprof
* Copyright 2021 peepeetee
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_MOOD
# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
# define RGB_MATRIX_KEYPRESSES
# define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
# define DISABLE_RGB_MATRIX_RAINDROPS
# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 1
# define DRIVER_1_LED_TOTAL 64
#define ENABLE_RGB_MATRIX_ALPHAS_MODS
#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
#define ENABLE_RGB_MATRIX_BREATHING
#define ENABLE_RGB_MATRIX_BAND_SAT
#define ENABLE_RGB_MATRIX_BAND_VAL
#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
#define ENABLE_RGB_MATRIX_CYCLE_ALL
#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
#define ENABLE_RGB_MATRIX_DUAL_BEACON
#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
#define ENABLE_RGB_MATRIX_RAINDROPS
#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
#define ENABLE_RGB_MATRIX_HUE_BREATHING
#define ENABLE_RGB_MATRIX_HUE_PENDULUM
#define ENABLE_RGB_MATRIX_HUE_WAVE
2022-01-11 18:57:25 +01:00
#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
#define ENABLE_RGB_MATRIX_PIXEL_RAIN
#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
#define ENABLE_RGB_MATRIX_DIGITAL_RAIN
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
#define ENABLE_RGB_MATRIX_SPLASH
#define ENABLE_RGB_MATRIX_MULTISPLASH
#define ENABLE_RGB_MATRIX_SOLID_SPLASH
#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
// Note: The RGB LED driver configuration is not inside #ifdef blocks, so that
// the driver code would still compile even without RGBLIGHT_ENABLE and
// RGB_MATRIX_ENABLE (usually this is not required, but with the custom
// IS31FL3733+WS2812 driver setup used by this board the LED controller drivers
// are compiled unconditionally).
#define ISSI_LED_TOTAL DRIVER_1_LED_TOTAL
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180
// Underglow LEDs are WS2812, but someone might want to use RGBLIGHT for them;
// don't use those LEDs in RGB Matrix in that case.
#ifdef RGBLIGHT_ENABLE
# define WS2812_LED_TOTAL 0
#else
# define WS2812_LED_TOTAL 6
#endif
#define RGB_MATRIX_LED_COUNT (ISSI_LED_TOTAL + WS2812_LED_TOTAL)
#ifdef RGB_MATRIX_ENABLE
# define RGB_MATRIX_KEYPRESSES
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#endif