1
0
Fork 0
forked from forks/qmk_firmware
qmk_firmware/users/arkag/arkag.c

549 lines
13 KiB
C
Raw Normal View History

Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
#include "arkag.h"
#include "eeprom.h"
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
Keymap: Velocikey implemented at userspace, readme is more helpful (#3974) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge...
2018-09-26 00:38:04 +02:00
/*
Current Layout and Keeb:
https://github.com/arkag/qmk_firmware/blob/master/keyboards/mechmini/v2/keymaps/arkag/keymap.c
*/
#include <stdbool.h>
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
Keymap: Velocikey implemented at userspace, readme is more helpful (#3974) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge...
2018-09-26 00:38:04 +02:00
// Start: Written by Chris Lewis
#ifndef MIN
#define MIN(a,b) (((a)<(b))?(a):(b))
#endif
#ifndef MAX
#define MAX(a,b) (((a)>(b))?(a):(b))
#endif
#define TYPING_SPEED_MAX_VALUE 200
uint8_t typing_speed = 0;
void velocikey_accelerate() {
if (typing_speed < TYPING_SPEED_MAX_VALUE) typing_speed += (TYPING_SPEED_MAX_VALUE / 50);
}
void velocikey_decelerate() {
static uint16_t decay_timer = 0;
if (timer_elapsed(decay_timer) > 500 || decay_timer == 0) {
if (typing_speed > 0) typing_speed -= 1;
//Decay a little faster at half of max speed
if (typing_speed > TYPING_SPEED_MAX_VALUE / 2) typing_speed -= 1;
//Decay even faster at 3/4 of max speed
if (typing_speed > TYPING_SPEED_MAX_VALUE / 4 * 3) typing_speed -= 3;
decay_timer = timer_read();
}
}
uint8_t velocikey_match_speed(uint8_t minValue, uint8_t maxValue) {
return MAX(minValue, maxValue - (maxValue - minValue) * ((float)typing_speed / TYPING_SPEED_MAX_VALUE));
}
// End: Written by Chris Lewis
static int shift_int = 0;
Keymap: Velocikey implemented at userspace, readme is more helpful (#3974) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge...
2018-09-26 00:38:04 +02:00
uint8_t current_os,
mod_primary_mask,
fade_interval,
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
num_extra_flashes_off = 0;
Color underglow,
flash_color,
saved_color,
Keymap: Velocikey implemented at userspace, readme is more helpful (#3974) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge...
2018-09-26 00:38:04 +02:00
hsv_none = {0,0,0};
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
flashState flash_state = no_flash;
fadeState fade_state = add_fade;
activityState state = boot;
bool aesthetic = false,
shifty = false;
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
float song_ussr[][2] = SONG(USSR_ANTHEM);
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
void set_color (Color new, bool update) {
rgblight_sethsv_eeprom_helper(new.h, new.s, new.v, update);
}
void save_color(Color to_save) {
saved_color = to_save;
}
void reset_color(void) {
underglow = saved_color;
}
Color mod_color(Color current_color, bool should_add, uint8_t change_amount) {
save_color(underglow);
int addlim = HUE_MAX - change_amount;
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
int sublim = change_amount;
int leftovers;
if (should_add) {
if (current_color.h <= addlim) {
current_color.h += change_amount;
} else {
leftovers = (HUE_MAX + change_amount) % HUE_MAX;
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
current_color.h = 0 + leftovers;
}
} else {
if (current_color.h >= sublim) {
current_color.h -= change_amount;
} else {
leftovers = change_amount - current_color.h;
current_color.h = HUE_MAX - leftovers;
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
}
}
return current_color;
}
void check_state (void) {
Keymap: Velocikey implemented at userspace, readme is more helpful (#3974) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge...
2018-09-26 00:38:04 +02:00
static uint16_t active_timer;
if (!active_timer) {active_timer = timer_read();}
static bool activated, deactivated, slept;
switch (state) {
case active:
if (!activated) {
if (slept) {rgblight_mode_noeeprom(1);}
activated = true;
deactivated = false;
}
fade_interval = velocikey_match_speed(1, 25);
if (timer_elapsed(active_timer) < INACTIVE_DELAY) {return;}
active_timer = timer_read();
state = inactive;
return;
case inactive:
if (!deactivated) {
deactivated = true;
activated = false;
}
velocikey_decelerate();
fade_interval = velocikey_match_speed(1, 25);
return;
case boot:
return;
}
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
}
void fade_rgb (void) {
Keymap: Velocikey implemented at userspace, readme is more helpful (#3974) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge...
2018-09-26 00:38:04 +02:00
static uint16_t fade_timer;
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
if (state == boot) {return;}
Keymap: Velocikey implemented at userspace, readme is more helpful (#3974) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge...
2018-09-26 00:38:04 +02:00
if (!fade_timer) {fade_timer = timer_read();}
if (timer_elapsed(fade_timer) < fade_interval) {return;}
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
switch (fade_state) {
case add_fade:
if (underglow.h == HUE_MAX) {
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
fade_state = sub_fade;
return;
}
underglow.h = underglow.h + 1;
Keymap: Velocikey implemented at userspace, readme is more helpful (#3974) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge...
2018-09-26 00:38:04 +02:00
break;
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
case sub_fade:
if (underglow.h == 0) {
fade_state = add_fade;
return;
}
underglow.h = underglow.h - 1;
Keymap: Velocikey implemented at userspace, readme is more helpful (#3974) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge...
2018-09-26 00:38:04 +02:00
break;
}
fade_timer = timer_read();
if (flash_state == no_flash) {
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
set_color(underglow, false);
}
}
void flash_rgb (void) {
Keymap: Velocikey implemented at userspace, readme is more helpful (#3974) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge...
2018-09-26 00:38:04 +02:00
static uint16_t flash_timer;
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
switch(flash_state) {
case no_flash:
return;
case flash_off:
Keymap: Velocikey implemented at userspace, readme is more helpful (#3974) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge...
2018-09-26 00:38:04 +02:00
if (!flash_timer) {flash_timer = timer_read();}
if (timer_elapsed(flash_timer) >= LED_FLASH_DELAY) {
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
set_color(hsv_none, false);
Keymap: Velocikey implemented at userspace, readme is more helpful (#3974) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge...
2018-09-26 00:38:04 +02:00
flash_timer = timer_read();
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
flash_state = flash_on;
}
return;
case flash_on:
Keymap: Velocikey implemented at userspace, readme is more helpful (#3974) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge...
2018-09-26 00:38:04 +02:00
if (timer_elapsed(flash_timer) >= LED_FLASH_DELAY) {
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
set_color(flash_color, false);
Keymap: Velocikey implemented at userspace, readme is more helpful (#3974) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge...
2018-09-26 00:38:04 +02:00
flash_timer = timer_read();
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
if (num_extra_flashes_off > 0) {
flash_state = flash_off;
num_extra_flashes_off--;
} else {
set_color(underglow, false);
flash_state = no_flash;
}
}
return;
}
}
void set_os (uint8_t os, bool update) {
current_os = os;
if (update) {
eeprom_update_byte(EECONFIG_USERSPACE, current_os);
}
switch (os) {
case OS_MAC:
set_unicode_input_mode(UC_OSX);
underglow = (Color){ 213, 255, 255 };
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
break;
case OS_WIN:
set_unicode_input_mode(UC_WINC);
underglow = (Color){ 128, 255, 255 };
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
break;
case OS_NIX:
set_unicode_input_mode(UC_LNX);
underglow = (Color){ 43, 255, 255 };
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
break;
default:
underglow = (Color){ 0, 0, 255 };
}
set_color(underglow, update);
Keymap: Velocikey implemented at userspace, readme is more helpful (#3974) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge...
2018-09-26 00:38:04 +02:00
flash_color = underglow;
flash_state = flash_off;
state = boot;
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
num_extra_flashes_off = 1;
}
// register GUI if Mac or Ctrl if other
void pri_mod(bool press) {
if (press) {
if (current_os == OS_MAC) {
register_code(KC_LGUI);
} else {
register_code(KC_LCTL);
}
} else {
if (current_os == OS_MAC) {
unregister_code(KC_LGUI);
} else {
unregister_code(KC_LCTL);
}
}
}
// register Ctrl if Mac or GUI if other
void sec_mod(bool press) {
if (press) {
if (current_os == OS_MAC) {
register_code(KC_LCTL);
} else {
register_code(KC_LGUI);
}
} else {
if (current_os == OS_MAC) {
unregister_code(KC_LCTL);
} else {
unregister_code(KC_LGUI);
}
}
}
// register Meh if Win or Hyper if other
// KC_MEH/HYPR registers both sides, causes issues with some apps
// I'll do it myself, then
void meh_hyper(bool press) {
if (current_os == OS_WIN) {
(press) ? register_mods(L_BIT_MEH) : unregister_mods(L_BIT_MEH);
} else {
(press) ? register_mods(L_BIT_HYPR) : unregister_mods(L_BIT_HYPR);
}
}
void multi_tap(uint8_t num_of_chars, uint16_t keycode, bool use_shift) {
if (use_shift) {
register_code(KC_LSFT);
}
for (int i = 0; i < num_of_chars; i++) {
tap_code(keycode);
}
if (use_shift) {
unregister_code(KC_LSFT);
}
}
void pair_surround_type(uint8_t num_of_chars, uint16_t keycode, bool use_shift) {
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
for (int i = 0; i < num_of_chars; i++) {
(use_shift) ? register_mods(MOD_BIT( KC_LSFT)) : NULL;
tap_code(keycode);
tap_code((keycode == KC_LCBR) ? KC_RCBR : (keycode == KC_LBRC) ? KC_RBRC : (keycode == KC_LPRN) ? KC_RPRN : KC_NO);
(use_shift) ? unregister_mods(MOD_BIT( KC_LSFT)) : NULL;
tap_code(KC_LEFT);
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
}
}
void surround_type(uint8_t num_of_chars, uint16_t keycode, bool use_shift) {
for (int i = 0; i < num_of_chars; i++) {
(use_shift) ? register_mods(MOD_BIT( KC_LSFT)) : NULL;
tap_code(keycode);
(use_shift) ? unregister_mods(MOD_BIT( KC_LSFT)) : NULL;
}
multi_tap(num_of_chars / 2, KC_LEFT, false);
}
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
void long_keystroke(size_t num_of_keys, uint16_t keys[]) {
for (int i = 0; i < num_of_keys-1; i++) {
register_code(keys[i]);
}
tap_code(keys[num_of_keys-1]);
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
for (int i = 0; i < num_of_keys-1; i++) {
unregister_code(keys[i]);
}
}
void pri_mod_keystroke(uint16_t key) {
pri_mod(true);
tap_code(key);
pri_mod(false);
}
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
void matrix_init_user(void) {
current_os = eeprom_read_byte(EECONFIG_USERSPACE);
set_os(current_os, false);
}
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
LEADER_EXTERNS();
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
void matrix_scan_user(void) {
check_state();
flash_rgb();
fade_rgb();
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
LEADER_DICTIONARY() {
leading = false;
leader_end();
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
// begin OS functions
SEQ_TWO_KEYS(KC_P, KC_B) {
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
if (current_os == OS_WIN) {
long_keystroke(2, (uint16_t[]){KC_LGUI, KC_PAUSE});
} else {
return;
}
}
SEQ_TWO_KEYS(KC_S, KC_S) {
if (current_os == OS_MAC) {
long_keystroke(3, (uint16_t[]){KC_LGUI, KC_LSFT, KC_4});
} else if (current_os == OS_WIN) {
long_keystroke(3, (uint16_t[]){KC_LGUI, KC_LSFT, KC_S});
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
} else {
return;
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
}
}
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
SEQ_THREE_KEYS(KC_C, KC_A, KC_D) {
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
if (current_os == OS_WIN) {
long_keystroke(3, (uint16_t[]){KC_LCTL, KC_LALT, KC_DEL});
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
} else {
}
}
SEQ_THREE_KEYS(KC_C, KC_A, KC_E) {
if (current_os == OS_WIN) {
long_keystroke(3, (uint16_t[]){KC_LCTL, KC_LALT, KC_END});
} else {
}
}
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
// end OS functions
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
// begin format functions
SEQ_ONE_KEY(KC_B) {
surround_type(2, KC_8, true);
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
}
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
SEQ_ONE_KEY(KC_I) {
surround_type(2, KC_MINS, true);
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
}
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
SEQ_ONE_KEY(KC_U) {
surround_type(4, KC_MINS, true);
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
}
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
SEQ_ONE_KEY(KC_S) {
surround_type(4, KC_GRAVE, true);
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
}
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
SEQ_ONE_KEY(KC_C) {
2021 May 29 Breaking Changes Update (#13034) * Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-29 23:38:50 +02:00
register_unicode(0x00E7); // ç
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
}
SEQ_TWO_KEYS(KC_A, KC_V) {
surround_type(2, KC_QUOT, true);
pair_surround_type(2, KC_LCBR, true);
surround_type(2, KC_SPC, false);
}
SEQ_TWO_KEYS(KC_M, KC_L) {
pair_surround_type(1, KC_LBRC, false);
SEND_STRING("LINK_NAME");
tap_code(KC_RGHT);
pair_surround_type(1, KC_LPRN, true);
pri_mod_keystroke(KC_V);
}
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
SEQ_TWO_KEYS(KC_C, KC_C) {
surround_type(2, KC_GRAVE, false);
}
SEQ_THREE_KEYS(KC_C, KC_C, KC_C) {
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
surround_type(6, KC_GRAVE, false);
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
}
SEQ_ONE_KEY(KC_E) {
2021 May 29 Breaking Changes Update (#13034) * Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-29 23:38:50 +02:00
register_unicode(0x00E8); // è
}
SEQ_TWO_KEYS(KC_E, KC_E) {
2021 May 29 Breaking Changes Update (#13034) * Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-29 23:38:50 +02:00
register_unicode(0x00E9); // é
}
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
// end format functions
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
// start fancy functions
SEQ_TWO_KEYS(KC_V, KC_P) {
SEND_STRING("ggvG}x:set paste\ni");
pri_mod_keystroke(KC_V);
}
SEQ_THREE_KEYS(KC_C, KC_C, KC_ENT) {
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
surround_type(6, KC_GRAVE, false);
pri_mod_keystroke(KC_V);
multi_tap(3, KC_RGHT, false);
tap_code(KC_ENTER);
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
}
SEQ_THREE_KEYS(KC_T, KC_C, KC_ENT) {
multi_tap(3, KC_GRAVE, false);
pri_mod_keystroke(KC_V);
multi_tap(2, KC_ENTER, false);
}
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
// end fancy functions
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
// start typing functions
SEQ_TWO_KEYS(KC_T, KC_M) {
2021 May 29 Breaking Changes Update (#13034) * Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-29 23:38:50 +02:00
register_unicode(0x2122); // ™
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
}
SEQ_TWO_KEYS(KC_D, KC_D) {
SEND_STRING(".\\Administrator");
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
}
SEQ_THREE_KEYS(KC_D, KC_D, KC_D) {
SEND_STRING(".\\Administrator");
tap_code(KC_TAB);
pri_mod_keystroke(KC_V);
tap_code(KC_ENTER);
}
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
SEQ_THREE_KEYS(KC_L, KC_O, KC_D) {
2021 May 29 Breaking Changes Update (#13034) * Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-29 23:38:50 +02:00
send_unicode_string("ಠ__ಠ");
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
}
SEQ_THREE_KEYS(KC_M, KC_A, KC_P) {
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
SEND_STRING("https://github.com/qmk/qmk_firmware/tree/master/users/arkag");
}
SEQ_TWO_KEYS(KC_F, KC_F) {
2021 May 29 Breaking Changes Update (#13034) * Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-29 23:38:50 +02:00
send_unicode_string("(╯‵Д′)╯彡┻━┻");
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
}
SEQ_THREE_KEYS(KC_F, KC_F, KC_F) {
2021 May 29 Breaking Changes Update (#13034) * Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-29 23:38:50 +02:00
send_unicode_string("┬─┬ノ( º _ º )");
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
}
SEQ_THREE_KEYS(KC_L, KC_O, KC_L) {
2021 May 29 Breaking Changes Update (#13034) * Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-29 23:38:50 +02:00
send_unicode_string("( ͡° ͜ʖ ͡°)");
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
}
SEQ_THREE_KEYS(KC_S, KC_S, KC_S) {
2021 May 29 Breaking Changes Update (#13034) * Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-29 23:38:50 +02:00
send_unicode_string("¯\\_(ツ)_/¯");
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
}
// end typing functions
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
}
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (aesthetic) {
switch (keycode) {
case KC_A ... KC_0:
case KC_SPACE ... KC_SLASH:
if (record->event.pressed) {
state = active;
velocikey_accelerate();
tap_code(keycode);
tap_code(KC_SPACE);
}
return false;
case KC_BSPACE:
if (record->event.pressed) {
state = active;
velocikey_accelerate();
tap_code(keycode);
tap_code(keycode);
}
return false;
default: // Do nothing
break;
}
}
if (shifty) {
switch (keycode) {
case KC_A ... KC_Z:
if (record->event.pressed) {
shift_int += (rand() % 5);
int shift = ((shift_int % 2) == 1) ? true : false;
state = active;
velocikey_accelerate();
(shift) ? register_code(KC_LSFT) : NULL;
tap_code(keycode);
(shift) ? unregister_code(KC_LSFT) : NULL;
}
return false;
case KC_SPC:
if (record->event.pressed) {
state = active;
velocikey_accelerate();
tap_code(keycode);
}
return false;
default: // Do nothing
break;
}
}
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
switch (keycode) {
#ifdef AUDIO_ENABLE
case M_USSR:
PLAY_SONG(song_ussr);
return false;
#endif
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
case M_OS:
if (record->event.pressed){
Keymap: Added Leader Key Functionality (#4025) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge... * implemented some leader key stuff * removed merge garbage... * changes requested by @drashna, leader key switch from macros
2018-09-30 02:51:06 +02:00
set_os((current_os+1) % _OS_COUNT, true);
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
}
return false;
case M_DASH:
if (record->event.pressed){
2021 May 29 Breaking Changes Update (#13034) * Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only
2021-05-29 23:38:50 +02:00
register_unicode(0x2014); // —
}
return false;
case M_LMHYP:
case M_EHYPR:
(keycode = M_LMHYP) ? (record->event.pressed) ? layer_on(_ARROW) : layer_off(_ARROW) : NULL;
meh_hyper(record->event.pressed);
return false;
case M_SFTY:
if(record->event.pressed){
num_extra_flashes_off = (shifty) ? 1 : 0;
shifty = !shifty;
flash_color = underglow;
flash_state = flash_off;
return false;
}
case M_AEST:
if(record->event.pressed){
num_extra_flashes_off = (aesthetic) ? 1 : 0;
aesthetic = !aesthetic;
flash_color = underglow;
flash_state = flash_off;
return false;
}
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
default:
if (record->event.pressed) {
state = active;
Keymap: Velocikey implemented at userspace, readme is more helpful (#3974) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna * removed homerow mods, more flashy lighting! * changed delays for lighting. * velocikey code retro fit into userspace to match typing speed currently "working" but isn't as reactive as I want. * Readme and other documentation hidden throughout code * Added a pretty picture * pretty picture actually added * More readme updates * Velocikey now working inside my userspace! * Changed repo macro and fixed readme * Removed media layer, moved media control to LAZY layer * fixed more merge issues when I had to merge...
2018-09-26 00:38:04 +02:00
velocikey_accelerate();
Keymap: Arkag Userspace and MechMini2 Layout (#3958) * deleting arkag branch, forcibly moving changes over to master * fade_color function added, not tested * added half functions some stuff * surround_type function implemented and working. * added flashing function and removed fading, flashing supports infinite flashing along with controlled number flashes * added a fade state machine and functionality * build optimizations, changed fade to bounce between bounds rather than roll over, added a HALMAK layout * changes to sleep breath function, changed how I will switch to HALMAK * support for halmak added * support for activity detection added, condensed fading and flashing state machines, removed support for HALMAK and COLEMAK because arkag is stupid * changed sleep and inactive behaviors, now the color shifting reverses on state change, yay! save_color and reset_color are made to enable layer color changing to look cooler. * reformatted some if statements in state detection * changes to force fade to pause on boot, or plug in. * Attempting to move over to userspace, pushing to repository for help * userspace stuff.... * userspace stuff.... * layout changes, working userspace, Removed left side shift and replaced it with a MT() for LSFT and SPC. Userspace seems to be working properly now! HURRAY * Layout change Removed space/shift and reset modifiers to what they were originally. Added homerow modifiers. * Removed excessive tabs in files * Moved mods on homerow around... * changes recommended by @drashna
2018-09-22 17:43:28 +02:00
}
return true;
}
}