1
0
Fork 0
forked from forks/qmk_firmware
qmk_firmware/keyboards/jacky_studio/s7_elephant/rev2/config.h

79 lines
2.6 KiB
C
Raw Normal View History

/* Copyright 2020 MudkipMao
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xA13B // Hexidecimal A13B will be Jacky's vendor ID
#define PRODUCT_ID 0x0008 // 8 for S7++
#define DEVICE_VER 0x0002
#define MANUFACTURER Jacky
#define PRODUCT Jacky S7 Elephant Rev 2
/* Don't remove this without also removing LTO_ENABLE=yes in rules.mk */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 16
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*
* 0 1 2 3 4 5 6 7 8 9 A B C D E F */
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 }
#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0, E6 }
/* Setting the matrix value of top left key for bootmagic lite */
#define BOOTMAGIC_LITE_ROW 0
#define BOOTMAGIC_LITE_COLUMN 15
#define DIODE_DIRECTION ROW2COL
#define BACKLIGHT_PIN B6
// #define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 15
#define RGB_DI_PIN E2
#ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 2
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
#endif // RGB_DI_PIN
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE