forked from forks/qmk_firmware
29 lines
1.3 KiB
Markdown
29 lines
1.3 KiB
Markdown
|
# handwired/3dp660_oled
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
*A handwired FC660 layout with OLED display support.*
|
||
|
|
|
||
|
|
* Keyboard Maintainer: [xia0](https://github.com/xia0)
|
||
|
|
* Hardware Supported: ATmega32U4 e.g. Arduino Pro Micro or Teensy 2.0
|
||
|
|
* Note: If using a Pro Micro, pins B0 and D5 are required. [Click for details](https://golem.hu/guide/pro-micro-upgrade/).
|
||
|
|
* Hardware Availability: [Printables](https://www.printables.com/model/464322-3dp-fc660-v3-oled-hand-wired-mechanical-keyboard)
|
||
|
|
|
||
|
|
Make example for this keyboard (after setting up your build environment):
|
||
|
|
|
||
|
|
make handwired/3dp660_oled:default
|
||
|
|
|
||
|
|
Flashing example for this keyboard:
|
||
|
|
|
||
|
|
make handwired/3dp660_oled:default:flash
|
||
|
|
|
||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
|
|
||
|
|
## Bootloader
|
||
|
|
|
||
|
|
Enter the bootloader in 3 ways:
|
||
|
|
|
||
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||
|
|
* **Physical reset button**: Briefly press the button on the MCU or short RST to GND.
|
||
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|