qmk_firmware/keyboards/mechwild/mokulua/standard/config.h

// Copyright 2022 Kyle McCreery (@kylemccreery)
// SPDX-License-Identifier: GPL-2.0-or-later

#pragma once

#include "config_common.h"

/* Key matrix size */
#define MATRIX_ROWS 12
#define MATRIX_COLS 6

/* Key matrix pins */
#define MATRIX_ROW_PINS { F4, F5, F6, F7, B1, B3 }
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 }
#define UNUSED_PINS

/* Encoder pins */
#define ENCODERS_PAD_A { D2 }
#define ENCODERS_PAD_B { B2 }

/* Encoder resolution */
#define ENCODER_RESOLUTION 4
#define TAP_CODE_DELAY 10

/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW

#define OLED_FONT_H "keyboards/mechwild/mokulua/glcdfont.c"

/*
 * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
 */
#define SOFT_SERIAL_PIN D3
#define MASTER_LEFT
//#define MASTER_RIGHT
#define RGBLIGHT_SPLIT
#define RGBLED_SPLIT { 8, 8 }
#define SPLIT_LAYER_STATE_ENABLE
#define SPLIT_LED_STATE_ENABLE
#define SPLIT_MODS_ENABLE
#define SPLIT_OLED_ENABLE

/* RGB options */
#define RGB_DI_PIN B6
#ifdef RGB_DI_PIN
#    define RGBLED_NUM 16
#    define RGBLIGHT_HUE_STEP 8
#    define RGBLIGHT_SAT_STEP 8
#    define RGBLIGHT_VAL_STEP 8
#    define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
#    define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== choose RGB animations ==*/
//#    define RGBLIGHT_EFFECT_BREATHING
#    define RGBLIGHT_EFFECT_RAINBOW_MOOD
#    define RGBLIGHT_EFFECT_RAINBOW_SWIRL
//#    define RGBLIGHT_EFFECT_SNAKE
//#    define RGBLIGHT_EFFECT_KNIGHT
//#    define RGBLIGHT_EFFECT_CHRISTMAS
//#    define RGBLIGHT_EFFECT_STATIC_GRADIENT
//#    define RGBLIGHT_EFFECT_RGB_TEST
//#    define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
#endif

/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5

/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST

/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
 * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
 */
//#define GRAVE_ESC_CTRL_OVERRIDE

/*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
//#define FORCE_NKRO

/*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */

/* disable debug print */
//#define NO_DEBUG

/* disable print */
//#define NO_PRINT

/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT


/* Bootmagic Lite key configuration */
#define BOOTMAGIC_LITE_ROW 0
#define BOOTMAGIC_LITE_COLUMN 0