varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/preonic/rev3/rules.mk

36 lines
1.3 KiB
Makefile
Raw Normal View History

[Core] Cleanup rules.mk for F303 keyboards (#7306) * Cleanup rules.mk for F303 keyboards * Fix small typo
2019-11-15 03:25:40 +01:00
# MCU name
MCU = STM32F303
Add board specific to Proton-C, with usual defaults turned on. (#10976) - Set all other ChibiOS defaults to 'off', when not targeting Proton-C - Modified all existing F303 boards to point at the QMK_PROTON_C to ensure repeatable binary output - Modified version.h generation so that SKIP_VERSION=yes generates the same output
2020-12-03 03:04:28 +01:00
BOARD = QMK_PROTON_C
adds support for preonic rev 3
2018-07-20 05:57:13 +02:00
# Build Options
Add Dip Switch as a core feature (#6140) * Add Dip Switches as a core feature * Add documentation for Dip Switch feature * Update Preonic Rev3 to use new feature and remove custom matrix * Apply suggestions from code review Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Remove custom matrix line completely Rather than just disabling it Co-Authored-By: fauxpark <fauxpark@gmail.com> * DIP changes Co-Authored-By: fauxpark <fauxpark@gmail.com> * Use better check for DIP Switch configuration * Add to show features * Add bitmask callback for dip switch * Fix OLKB Boards dip switch config * Update docs to include bitmask example * Fix comments/documentation Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fix issues with docs and use example from @tuzonghua * Fix wording Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fix example to use proper formatting Bad, BAAAAAAD drashna!!! * Handle dip switch initialization better
2019-09-03 17:34:31 +02:00
# change to "no" to disable the options, or define them in the Makefile in
Fix Planck and Preonic builds (#5658) * Planck: Copy contents of Planck rules.mk to each revision * Planck: Delete Planck rules.mk * Planck: Concatenate duplicate rules Concatenate rules that are set and then overridden into one setting. * Preonic: Copy contents of Preonic rules.mk to each revision * Preonic: Delete Preonic rules.mk * Preonic: Concatenate duplicate rules Concatenate rules that are set and then overridden into one setting. * Planck: Delete non-specific Bootloader settings from revs. 1 and 2 Deleted BOOTLOADER setting code block, as the checks were only valid for revs. 3-5 and the Planck Light. Neither Planck rev1 or rev2 set the bootloader via rules.mk, so there's no setting of BOOTLOADER in their rules.mk files. * Preonic: Fix BOOTLOADER settings code blocks * Preonic: delete extra blank lines from rules.mk files * Preonic: delete AVR-type hardware config blocks from rev3 * Update Planck and Preonic readme files - update Hardware Supported - update/add Install Examples - update Docs paragraph * Enable Bootmagic Lite where it is disabled Enabled Bootmagic Lite for: - Planck Light - Planck revs. 1-5 - Preonic revs. 1 and 2 * Remove `planck_grid` from LAYOUTS rule for all Planck revisions Community has landed on `ortho_4x12`, which is already set; `planck_grid` is redundant.
2019-04-29 20:04:56 +02:00
# the appropriate keymap folder that will get included automatically
adds support for preonic rev 3
2018-07-20 05:57:13 +02:00
#
Change `BOOTMAGIC_ENABLE=yes` to use Bootmagic Lite (#12172)
2021-04-12 21:18:52 +02:00
BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration
Trim firmware sizes from default rules.mk, part 3 (#8045)
2020-01-30 20:13:49 +01:00
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
Fix Planck and Preonic builds (#5658) * Planck: Copy contents of Planck rules.mk to each revision * Planck: Delete Planck rules.mk * Planck: Concatenate duplicate rules Concatenate rules that are set and then overridden into one setting. * Preonic: Copy contents of Preonic rules.mk to each revision * Preonic: Delete Preonic rules.mk * Preonic: Concatenate duplicate rules Concatenate rules that are set and then overridden into one setting. * Planck: Delete non-specific Bootloader settings from revs. 1 and 2 Deleted BOOTLOADER setting code block, as the checks were only valid for revs. 3-5 and the Planck Light. Neither Planck rev1 or rev2 set the bootloader via rules.mk, so there's no setting of BOOTLOADER in their rules.mk files. * Preonic: Fix BOOTLOADER settings code blocks * Preonic: delete extra blank lines from rules.mk files * Preonic: delete AVR-type hardware config blocks from rev3 * Update Planck and Preonic readme files - update Hardware Supported - update/add Install Examples - update Docs paragraph * Enable Bootmagic Lite where it is disabled Enabled Bootmagic Lite for: - Planck Light - Planck revs. 1-5 - Preonic revs. 1 and 2 * Remove `planck_grid` from LAYOUTS rule for all Planck revisions Community has landed on `ortho_4x12`, which is already set; `planck_grid` is redundant.
2019-04-29 20:04:56 +02:00
COMMAND_ENABLE = yes # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
2020 May 30 Breaking Changes Update (#9215) * Branch point for 2020 May 30 Breaking Change * Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954) * Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957) * Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958) * Migrate `ACTION_LAYER_MODS` to `LM()` (#8959) * Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968) * Convert V-USB usbdrv to a submodule (#8321) * Unify Tap Hold functions and documentation (#8348) * Changing board names to prevent confusion (#8412) * Move the Keyboardio Model01 to a keyboardio/ subdir (#8499) * Move spaceman keyboards (#8830) * Migrate miscellaneous `fn_actions` entries (#8977) * Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979) * Organizing my keyboards (plaid, tartan, ergoinu) (#8537) * Refactor Lily58 to use split_common (#6260) * Refactor zinc to use split_common (#7114) * Add a message if bin/qmk doesn't work (#9000) * Fix conflicting types for 'tfp_printf' (#8269) * Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480) * Refactor and updates to TKC1800 code (#8472) * Switch to qmk forks for everything (#9019) * audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484) * Audio enable corrections (2/3) (#8903) * Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582) * Audio enable corrections (Part 4) (#8974) * Fix typo from PR7114 (#9171) * Augment future branch Changelogs (#8978) * Revert "Branch point for 2020 May 30 Breaking Change"
2020-05-30 22:14:59 +02:00
AUDIO_ENABLE = yes # Audio output
Fix Planck and Preonic builds (#5658) * Planck: Copy contents of Planck rules.mk to each revision * Planck: Delete Planck rules.mk * Planck: Concatenate duplicate rules Concatenate rules that are set and then overridden into one setting. * Preonic: Copy contents of Preonic rules.mk to each revision * Preonic: Delete Preonic rules.mk * Preonic: Concatenate duplicate rules Concatenate rules that are set and then overridden into one setting. * Planck: Delete non-specific Bootloader settings from revs. 1 and 2 Deleted BOOTLOADER setting code block, as the checks were only valid for revs. 3-5 and the Planck Light. Neither Planck rev1 or rev2 set the bootloader via rules.mk, so there's no setting of BOOTLOADER in their rules.mk files. * Preonic: Fix BOOTLOADER settings code blocks * Preonic: delete extra blank lines from rules.mk files * Preonic: delete AVR-type hardware config blocks from rev3 * Update Planck and Preonic readme files - update Hardware Supported - update/add Install Examples - update Docs paragraph * Enable Bootmagic Lite where it is disabled Enabled Bootmagic Lite for: - Planck Light - Planck revs. 1-5 - Preonic revs. 1 and 2 * Remove `planck_grid` from LAYOUTS rule for all Planck revisions Community has landed on `ortho_4x12`, which is already set; `planck_grid` is redundant.
2019-04-29 20:04:56 +02:00
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
[Keyboard] Enable RGB Light on ARM OLKB Keyboards (#7293) * Enable RGBLight on Planck Rev6 * Enable RGBLight on Preonic Rev3 All hail zvecr!
2019-11-08 00:49:51 +01:00
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
WS2812_DRIVER = bitbang
Fix Planck and Preonic builds (#5658) * Planck: Copy contents of Planck rules.mk to each revision * Planck: Delete Planck rules.mk * Planck: Concatenate duplicate rules Concatenate rules that are set and then overridden into one setting. * Preonic: Copy contents of Preonic rules.mk to each revision * Preonic: Delete Preonic rules.mk * Preonic: Concatenate duplicate rules Concatenate rules that are set and then overridden into one setting. * Planck: Delete non-specific Bootloader settings from revs. 1 and 2 Deleted BOOTLOADER setting code block, as the checks were only valid for revs. 3-5 and the Planck Light. Neither Planck rev1 or rev2 set the bootloader via rules.mk, so there's no setting of BOOTLOADER in their rules.mk files. * Preonic: Fix BOOTLOADER settings code blocks * Preonic: delete extra blank lines from rules.mk files * Preonic: delete AVR-type hardware config blocks from rev3 * Update Planck and Preonic readme files - update Hardware Supported - update/add Install Examples - update Docs paragraph * Enable Bootmagic Lite where it is disabled Enabled Bootmagic Lite for: - Planck Light - Planck revs. 1-5 - Preonic revs. 1 and 2 * Remove `planck_grid` from LAYOUTS rule for all Planck revisions Community has landed on `ortho_4x12`, which is already set; `planck_grid` is redundant.
2019-04-29 20:04:56 +02:00
API_SYSEX_ENABLE = no
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
#SLEEP_LED_ENABLE = yes
Add RGB Matrix support for Preonic rev3 (#12008) * Add g_led_config for RGB Matrix support * Corrected indentation * Undo indentation on existing rev3.c code Co-authored-by: filterpaper <filterpaper@localhost>
2021-02-28 07:15:38 +01:00
# Do not enable RGB_MATRIX_ENABLE together with RGBLIGHT_ENABLE
RGB_MATRIX_ENABLE = no
RGB_MATRIX_DRIVER = WS2812
use built-in arm stuff
2019-01-26 01:18:14 +01:00
ENCODER_ENABLE = yes
Add Dip Switch as a core feature (#6140) * Add Dip Switches as a core feature * Add documentation for Dip Switch feature * Update Preonic Rev3 to use new feature and remove custom matrix * Apply suggestions from code review Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Remove custom matrix line completely Rather than just disabling it Co-Authored-By: fauxpark <fauxpark@gmail.com> * DIP changes Co-Authored-By: fauxpark <fauxpark@gmail.com> * Use better check for DIP Switch configuration * Add to show features * Add bitmask callback for dip switch * Fix OLKB Boards dip switch config * Update docs to include bitmask example * Fix comments/documentation Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fix issues with docs and use example from @tuzonghua * Fix wording Co-Authored-By: fauxpark <fauxpark@gmail.com> * Fix example to use proper formatting Bad, BAAAAAAD drashna!!! * Handle dip switch initialization better
2019-09-03 17:34:31 +02:00
DIP_SWITCH_ENABLE = yes
Fix Planck and Preonic builds (#5658) * Planck: Copy contents of Planck rules.mk to each revision * Planck: Delete Planck rules.mk * Planck: Concatenate duplicate rules Concatenate rules that are set and then overridden into one setting. * Preonic: Copy contents of Preonic rules.mk to each revision * Preonic: Delete Preonic rules.mk * Preonic: Concatenate duplicate rules Concatenate rules that are set and then overridden into one setting. * Planck: Delete non-specific Bootloader settings from revs. 1 and 2 Deleted BOOTLOADER setting code block, as the checks were only valid for revs. 3-5 and the Planck Light. Neither Planck rev1 or rev2 set the bootloader via rules.mk, so there's no setting of BOOTLOADER in their rules.mk files. * Preonic: Fix BOOTLOADER settings code blocks * Preonic: delete extra blank lines from rules.mk files * Preonic: delete AVR-type hardware config blocks from rev3 * Update Planck and Preonic readme files - update Hardware Supported - update/add Install Examples - update Docs paragraph * Enable Bootmagic Lite where it is disabled Enabled Bootmagic Lite for: - Planck Light - Planck revs. 1-5 - Preonic revs. 1 and 2 * Remove `planck_grid` from LAYOUTS rule for all Planck revisions Community has landed on `ortho_4x12`, which is already set; `planck_grid` is redundant.
2019-04-29 20:04:56 +02:00
LAYOUTS = ortho_5x12
Copy permalink