varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity
qmk_firmware/keyboards/sawnsprojects/krush/krush60/solder/info.json

1174 lines
58 KiB
JSON
Raw Normal View History

[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
{
Move keyboard USB IDs and strings to data driven: S (#17889)
2022-08-04 00:12:37 +02:00
"keyboard_name": "Krush60 - Solder",
"manufacturer": "SawnsProjects",
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
"url": "",
"maintainer": "MaiTheSan",
Move keyboard USB IDs and strings to data driven: S (#17889)
2022-08-04 00:12:37 +02:00
"usb": {
"vid": "0x5350",
"pid": "0x6B32",
"device_version": "0.0.1"
},
Move matrix config to info.json, part 5 (#20003) Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-03-10 19:41:58 +01:00
"matrix_pins": {
"cols": ["C7", "C6", "B6", "B5", "B4", "D7", "D5", "D3"],
"rows": ["B1", "B2", "D1", "D2", "D4", "D6", "F6", "F7", "F5", "F4"]
},
"diode_direction": "COL2ROW",
Move LED indicator config to data driven (#19800)
2023-02-17 03:14:29 +01:00
"indicators": {
"caps_lock": "F0",
"on_state": 0
},
Migrate `rgblight.pin` and `RGB_DI_PIN` to `ws2812.pin` (#20303)
2023-04-06 10:00:54 +02:00
"ws2812": {
"pin": "F1"
},
Move `RGBLIGHT_LIMIT_VAL` to data driven (#20974) Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-05-27 04:27:44 +02:00
"rgblight": {
Move `RGBLIGHT_HUE/SAT/VAL_STEP` to data driven (#21292) Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-06-24 09:37:54 +02:00
"saturation_steps": 8,
"brightness_steps": 8,
Move `RGBLED_NUM` to data driven (#21278)
2023-06-18 06:39:07 +02:00
"led_count": 20,
Move `RGBLIGHT_SLEEP` to data driven (#21072)
2023-06-16 06:04:45 +02:00
"max_brightness": 200,
"sleep": true
Move `RGBLIGHT_LIMIT_VAL` to data driven (#20974) Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-05-27 04:27:44 +02:00
},
Migrate `MCU` and `BOOTLOADER` to data-driven (#19529)
2023-02-08 08:41:46 +01:00
"processor": "atmega32u4",
"bootloader": "atmel-dfu",
Krush60 Solder Refactor (#16029) * solder.h: add matrix diagram * solder.h: remove unnecessary comments * rework LAYOUT_60_iso to LAYOUT_60_isoenter_split_bs True ISO layouts are not supported on this keyboard because the PCB lacks support for split Left Shift. Renames the `iso` to `isoenter` to specify this. - denotes use of Split Backspace - move Backslash keycode to home row * info.json: remove trailing whitespace * info.json: clean up Sort the layout trees into the same order as `solder.h`, and remove the `LAYOUT_60_all` tree (doesn't exist in source). * solder.h: align positional arguments Helps me proof-read the layouts at a glance. No logic change. * fix syntax errors in keymaps * remove ISO layouts As previously noted, ISO layouts are not supported due to the PCB's lack of support for split Left Shift. * rename LAYOUT_60_ansi_tsangan_split_bs to LAYOUT_60_tsangan_hhkb Also renames `60_tsangan_splt_bs` keymap to `60_tsangan_hhkb`. * rename LAYOUT_60_ansi_tsangan to LAYOUT_60_ansi_tsangan_split_rshift Also renames `60_tsangan` keymap to `60_ansi_tsangan_split_rshift`. * rename LAYOUT_60_ansi_arrow_split_bs_7u_spc to LAYOUT_60_ansi_arrow_tsangan_split_bs Also rename `60_ansi_arrow_splt_bs_7u` to `60_ansi_arrow_tsangan_split_bs`. * rename LAYOUT_60_ansi_arrow_7u_spc to LAYOUT_60_ansi_arrow_tsangan Also renames `60_ansi_arrow_7u` keymap to `60_ansi_arrow_tsangan`. * rename keymaps based on layout macro used Making this easier to track in my head while I work on it. * info.json: fix syntax errors * rename LAYOUT_60_ansi_split_bs_7u_spc to LAYOUT_60_ansi_tsangan_split_bs - renames `60_ansi_split_bs_7u_spc` keymap to `60_ansi_tsangan_split_bs` - removes `layout_aliases` entry from `info.json` (creates incompatible data conflict) * rename LAYOUT_60_ansi_7u_spc to LAYOUT_60_ansi_tsangan - renames `60_ansi_7u_spc` keymap to `60_ansi_tsangan` * info.json: remove LAYOUT_60_ansi_tsangan layout_aliases entry Causes an incompatible data conflict. * add second layer to 60_ansi keymap * update via keymap Now matches the behaviour of the default keymap. * fix syntax errors in keymaps, take 2 * add RGB and Navigation keycodes Adds RGB and Navigation keycodes to the `60_isoenter_split_bs`, `default` and `via` keymaps.
2022-01-26 20:23:18 +01:00
"layout_aliases": {
"LAYOUT_60_ansi_arrow_split_bs_7u_spc": "LAYOUT_60_ansi_arrow_tsangan_split_bs",
"LAYOUT_60_ansi_arrow_7u_spc": "LAYOUT_60_ansi_arrow_tsangan"
},
Migrate `LAYOUTS` to data driven (#19541) * Migrate `LAYOUTS` to data driven, 0-9 * Migrate `LAYOUTS` to data driven, A * Migrate `LAYOUTS` to data driven, B * Migrate `LAYOUTS` to data driven, C * Migrate `LAYOUTS` to data driven, D * Migrate `LAYOUTS` to data driven, E * Migrate `LAYOUTS` to data driven, F * Migrate `LAYOUTS` to data driven, G * Migrate `LAYOUTS` to data driven, H * Migrate `LAYOUTS` to data driven, handwired * Migrate `LAYOUTS` to data driven, I * Migrate `LAYOUTS` to data driven, J * Migrate `LAYOUTS` to data driven, K * Migrate `LAYOUTS` to data driven, L * Migrate `LAYOUTS` to data driven, M * Migrate `LAYOUTS` to data driven, N * Migrate `LAYOUTS` to data driven, O * Migrate `LAYOUTS` to data driven, P * Migrate `LAYOUTS` to data driven, Q * Migrate `LAYOUTS` to data driven, R * Migrate `LAYOUTS` to data driven, S * Migrate `LAYOUTS` to data driven, T * Migrate `LAYOUTS` to data driven, U * Migrate `LAYOUTS` to data driven, V * Migrate `LAYOUTS` to data driven, W * Migrate `LAYOUTS` to data driven, X * Migrate `LAYOUTS` to data driven, Y * Migrate `LAYOUTS` to data driven, Z
2023-01-10 03:48:20 +01:00
"community_layouts": ["60_ansi", "60_ansi_arrow", "60_ansi_arrow_split_bs_7u_spc"],
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
"layouts": {
[Keyboard] Fix layout + led state for Krush (#15231)
2021-11-29 09:22:31 +01:00
"LAYOUT_all": {
"layout": [
Move remaining `LAYOUT_all`s to data driven (#20463)
2023-04-26 23:45:43 +02:00
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [1, 0], "x": 1, "y": 0},
{"matrix": [0, 1], "x": 2, "y": 0},
{"matrix": [1, 1], "x": 3, "y": 0},
{"matrix": [0, 2], "x": 4, "y": 0},
{"matrix": [1, 2], "x": 5, "y": 0},
{"matrix": [0, 3], "x": 6, "y": 0},
{"matrix": [1, 3], "x": 7, "y": 0},
{"matrix": [0, 4], "x": 8, "y": 0},
{"matrix": [1, 4], "x": 9, "y": 0},
{"matrix": [0, 5], "x": 10, "y": 0},
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 6], "x": 12, "y": 0},
{"matrix": [2, 6], "x": 13, "y": 0},
{"matrix": [1, 7], "x": 14, "y": 0},
{"matrix": [2, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [3, 0], "x": 1.5, "y": 1},
{"matrix": [2, 1], "x": 2.5, "y": 1},
{"matrix": [3, 1], "x": 3.5, "y": 1},
{"matrix": [2, 2], "x": 4.5, "y": 1},
{"matrix": [3, 2], "x": 5.5, "y": 1},
{"matrix": [2, 3], "x": 6.5, "y": 1},
{"matrix": [3, 3], "x": 7.5, "y": 1},
{"matrix": [2, 4], "x": 8.5, "y": 1},
{"matrix": [3, 4], "x": 9.5, "y": 1},
{"matrix": [2, 5], "x": 10.5, "y": 1},
{"matrix": [3, 5], "x": 11.5, "y": 1},
{"matrix": [3, 6], "x": 12.5, "y": 1},
{"matrix": [4, 6], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [4, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [5, 0], "x": 1.75, "y": 2},
{"matrix": [4, 1], "x": 2.75, "y": 2},
{"matrix": [5, 1], "x": 3.75, "y": 2},
{"matrix": [4, 2], "x": 4.75, "y": 2},
{"matrix": [5, 2], "x": 5.75, "y": 2},
{"matrix": [4, 3], "x": 6.75, "y": 2},
{"matrix": [5, 3], "x": 7.75, "y": 2},
{"matrix": [4, 4], "x": 8.75, "y": 2},
{"matrix": [5, 4], "x": 9.75, "y": 2},
{"matrix": [4, 5], "x": 10.75, "y": 2},
{"matrix": [5, 5], "x": 11.75, "y": 2},
{"matrix": [4, 7], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [6, 0], "x": 0, "y": 3, "w": 2},
{"matrix": [7, 0], "x": 2, "y": 3},
{"matrix": [6, 1], "x": 3, "y": 3},
{"matrix": [7, 1], "x": 4, "y": 3},
{"matrix": [6, 2], "x": 5, "y": 3},
{"matrix": [7, 2], "x": 6, "y": 3},
{"matrix": [6, 3], "x": 7, "y": 3},
{"matrix": [7, 3], "x": 8, "y": 3},
{"matrix": [6, 4], "x": 9, "y": 3},
{"matrix": [7, 4], "x": 10, "y": 3},
{"matrix": [6, 5], "x": 11, "y": 3},
{"matrix": [7, 5], "x": 12, "y": 3},
{"matrix": [6, 6], "x": 13, "y": 3},
{"matrix": [7, 7], "x": 14, "y": 3},
{"matrix": [8, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [9, 0], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [8, 1], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [8, 2], "x": 3.75, "y": 4, "w": 2.25},
{"matrix": [9, 2], "x": 6, "y": 4, "w": 1.25},
{"matrix": [8, 4], "x": 7.25, "y": 4, "w": 2.75},
{"matrix": [9, 4], "x": 10, "y": 4},
{"matrix": [8, 5], "x": 11, "y": 4},
{"matrix": [8, 6], "x": 12, "y": 4},
{"matrix": [9, 5], "x": 13, "y": 4},
{"matrix": [9, 7], "x": 14, "y": 4}
[Keyboard] Fix layout + led state for Krush (#15231)
2021-11-29 09:22:31 +01:00
]
},
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
"LAYOUT_60_ansi": {
"layout": [
Move remaining `LAYOUT_all`s to data driven (#20463)
2023-04-26 23:45:43 +02:00
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [1, 0], "x": 1, "y": 0},
{"matrix": [0, 1], "x": 2, "y": 0},
{"matrix": [1, 1], "x": 3, "y": 0},
{"matrix": [0, 2], "x": 4, "y": 0},
{"matrix": [1, 2], "x": 5, "y": 0},
{"matrix": [0, 3], "x": 6, "y": 0},
{"matrix": [1, 3], "x": 7, "y": 0},
{"matrix": [0, 4], "x": 8, "y": 0},
{"matrix": [1, 4], "x": 9, "y": 0},
{"matrix": [0, 5], "x": 10, "y": 0},
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 6], "x": 12, "y": 0},
{"matrix": [2, 6], "x": 13, "y": 0, "w": 2},
{"matrix": [2, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [3, 0], "x": 1.5, "y": 1},
{"matrix": [2, 1], "x": 2.5, "y": 1},
{"matrix": [3, 1], "x": 3.5, "y": 1},
{"matrix": [2, 2], "x": 4.5, "y": 1},
{"matrix": [3, 2], "x": 5.5, "y": 1},
{"matrix": [2, 3], "x": 6.5, "y": 1},
{"matrix": [3, 3], "x": 7.5, "y": 1},
{"matrix": [2, 4], "x": 8.5, "y": 1},
{"matrix": [3, 4], "x": 9.5, "y": 1},
{"matrix": [2, 5], "x": 10.5, "y": 1},
{"matrix": [3, 5], "x": 11.5, "y": 1},
{"matrix": [3, 6], "x": 12.5, "y": 1},
{"matrix": [4, 6], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [4, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [5, 0], "x": 1.75, "y": 2},
{"matrix": [4, 1], "x": 2.75, "y": 2},
{"matrix": [5, 1], "x": 3.75, "y": 2},
{"matrix": [4, 2], "x": 4.75, "y": 2},
{"matrix": [5, 2], "x": 5.75, "y": 2},
{"matrix": [4, 3], "x": 6.75, "y": 2},
{"matrix": [5, 3], "x": 7.75, "y": 2},
{"matrix": [4, 4], "x": 8.75, "y": 2},
{"matrix": [5, 4], "x": 9.75, "y": 2},
{"matrix": [4, 5], "x": 10.75, "y": 2},
{"matrix": [5, 5], "x": 11.75, "y": 2},
{"matrix": [4, 7], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [6, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [7, 0], "x": 2.25, "y": 3},
{"matrix": [6, 1], "x": 3.25, "y": 3},
{"matrix": [7, 1], "x": 4.25, "y": 3},
{"matrix": [6, 2], "x": 5.25, "y": 3},
{"matrix": [7, 2], "x": 6.25, "y": 3},
{"matrix": [6, 3], "x": 7.25, "y": 3},
{"matrix": [7, 3], "x": 8.25, "y": 3},
{"matrix": [6, 4], "x": 9.25, "y": 3},
{"matrix": [7, 4], "x": 10.25, "y": 3},
{"matrix": [6, 5], "x": 11.25, "y": 3},
{"matrix": [6, 6], "x": 12.25, "y": 3, "w": 2.75},
{"matrix": [8, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [9, 0], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [8, 1], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [9, 2], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [9, 4], "x": 10, "y": 4, "w": 1.25},
{"matrix": [8, 5], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [9, 5], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [9, 7], "x": 13.75, "y": 4, "w": 1.25}
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
]
},
Krush60 Solder Refactor (#16029) * solder.h: add matrix diagram * solder.h: remove unnecessary comments * rework LAYOUT_60_iso to LAYOUT_60_isoenter_split_bs True ISO layouts are not supported on this keyboard because the PCB lacks support for split Left Shift. Renames the `iso` to `isoenter` to specify this. - denotes use of Split Backspace - move Backslash keycode to home row * info.json: remove trailing whitespace * info.json: clean up Sort the layout trees into the same order as `solder.h`, and remove the `LAYOUT_60_all` tree (doesn't exist in source). * solder.h: align positional arguments Helps me proof-read the layouts at a glance. No logic change. * fix syntax errors in keymaps * remove ISO layouts As previously noted, ISO layouts are not supported due to the PCB's lack of support for split Left Shift. * rename LAYOUT_60_ansi_tsangan_split_bs to LAYOUT_60_tsangan_hhkb Also renames `60_tsangan_splt_bs` keymap to `60_tsangan_hhkb`. * rename LAYOUT_60_ansi_tsangan to LAYOUT_60_ansi_tsangan_split_rshift Also renames `60_tsangan` keymap to `60_ansi_tsangan_split_rshift`. * rename LAYOUT_60_ansi_arrow_split_bs_7u_spc to LAYOUT_60_ansi_arrow_tsangan_split_bs Also rename `60_ansi_arrow_splt_bs_7u` to `60_ansi_arrow_tsangan_split_bs`. * rename LAYOUT_60_ansi_arrow_7u_spc to LAYOUT_60_ansi_arrow_tsangan Also renames `60_ansi_arrow_7u` keymap to `60_ansi_arrow_tsangan`. * rename keymaps based on layout macro used Making this easier to track in my head while I work on it. * info.json: fix syntax errors * rename LAYOUT_60_ansi_split_bs_7u_spc to LAYOUT_60_ansi_tsangan_split_bs - renames `60_ansi_split_bs_7u_spc` keymap to `60_ansi_tsangan_split_bs` - removes `layout_aliases` entry from `info.json` (creates incompatible data conflict) * rename LAYOUT_60_ansi_7u_spc to LAYOUT_60_ansi_tsangan - renames `60_ansi_7u_spc` keymap to `60_ansi_tsangan` * info.json: remove LAYOUT_60_ansi_tsangan layout_aliases entry Causes an incompatible data conflict. * add second layer to 60_ansi keymap * update via keymap Now matches the behaviour of the default keymap. * fix syntax errors in keymaps, take 2 * add RGB and Navigation keycodes Adds RGB and Navigation keycodes to the `60_isoenter_split_bs`, `default` and `via` keymaps.
2022-01-26 20:23:18 +01:00
"LAYOUT_60_isoenter_split_bs": {
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
"layout": [
Move remaining `LAYOUT_all`s to data driven (#20463)
2023-04-26 23:45:43 +02:00
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [1, 0], "x": 1, "y": 0},
{"matrix": [0, 1], "x": 2, "y": 0},
{"matrix": [1, 1], "x": 3, "y": 0},
{"matrix": [0, 2], "x": 4, "y": 0},
{"matrix": [1, 2], "x": 5, "y": 0},
{"matrix": [0, 3], "x": 6, "y": 0},
{"matrix": [1, 3], "x": 7, "y": 0},
{"matrix": [0, 4], "x": 8, "y": 0},
{"matrix": [1, 4], "x": 9, "y": 0},
{"matrix": [0, 5], "x": 10, "y": 0},
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 6], "x": 12, "y": 0},
{"matrix": [2, 6], "x": 13, "y": 0},
{"matrix": [1, 7], "x": 14, "y": 0},
{"matrix": [2, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [3, 0], "x": 1.5, "y": 1},
{"matrix": [2, 1], "x": 2.5, "y": 1},
{"matrix": [3, 1], "x": 3.5, "y": 1},
{"matrix": [2, 2], "x": 4.5, "y": 1},
{"matrix": [3, 2], "x": 5.5, "y": 1},
{"matrix": [2, 3], "x": 6.5, "y": 1},
{"matrix": [3, 3], "x": 7.5, "y": 1},
{"matrix": [2, 4], "x": 8.5, "y": 1},
{"matrix": [3, 4], "x": 9.5, "y": 1},
{"matrix": [2, 5], "x": 10.5, "y": 1},
{"matrix": [3, 5], "x": 11.5, "y": 1},
{"matrix": [3, 6], "x": 12.5, "y": 1},
{"matrix": [4, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [5, 0], "x": 1.75, "y": 2},
{"matrix": [4, 1], "x": 2.75, "y": 2},
{"matrix": [5, 1], "x": 3.75, "y": 2},
{"matrix": [4, 2], "x": 4.75, "y": 2},
{"matrix": [5, 2], "x": 5.75, "y": 2},
{"matrix": [4, 3], "x": 6.75, "y": 2},
{"matrix": [5, 3], "x": 7.75, "y": 2},
{"matrix": [4, 4], "x": 8.75, "y": 2},
{"matrix": [5, 4], "x": 9.75, "y": 2},
{"matrix": [4, 5], "x": 10.75, "y": 2},
{"matrix": [5, 5], "x": 11.75, "y": 2},
{"matrix": [4, 6], "x": 12.75, "y": 2},
{"matrix": [4, 7], "x": 13.75, "y": 1, "w": 1.25, "h": 2},
{"matrix": [6, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [7, 0], "x": 2.25, "y": 3},
{"matrix": [6, 1], "x": 3.25, "y": 3},
{"matrix": [7, 1], "x": 4.25, "y": 3},
{"matrix": [6, 2], "x": 5.25, "y": 3},
{"matrix": [7, 2], "x": 6.25, "y": 3},
{"matrix": [6, 3], "x": 7.25, "y": 3},
{"matrix": [7, 3], "x": 8.25, "y": 3},
{"matrix": [6, 4], "x": 9.25, "y": 3},
{"matrix": [7, 4], "x": 10.25, "y": 3},
{"matrix": [6, 5], "x": 11.25, "y": 3},
{"matrix": [6, 6], "x": 12.25, "y": 3, "w": 2.75},
{"matrix": [8, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [9, 0], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [8, 1], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [9, 2], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [9, 4], "x": 10, "y": 4, "w": 1.25},
{"matrix": [8, 5], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [9, 5], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [9, 7], "x": 13.75, "y": 4, "w": 1.25}
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
]
},
"LAYOUT_60_ansi_split_bs": {
"layout": [
Move remaining `LAYOUT_all`s to data driven (#20463)
2023-04-26 23:45:43 +02:00
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [1, 0], "x": 1, "y": 0},
{"matrix": [0, 1], "x": 2, "y": 0},
{"matrix": [1, 1], "x": 3, "y": 0},
{"matrix": [0, 2], "x": 4, "y": 0},
{"matrix": [1, 2], "x": 5, "y": 0},
{"matrix": [0, 3], "x": 6, "y": 0},
{"matrix": [1, 3], "x": 7, "y": 0},
{"matrix": [0, 4], "x": 8, "y": 0},
{"matrix": [1, 4], "x": 9, "y": 0},
{"matrix": [0, 5], "x": 10, "y": 0},
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 6], "x": 12, "y": 0},
{"matrix": [2, 6], "x": 13, "y": 0},
{"matrix": [1, 7], "x": 14, "y": 0},
{"matrix": [2, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [3, 0], "x": 1.5, "y": 1},
{"matrix": [2, 1], "x": 2.5, "y": 1},
{"matrix": [3, 1], "x": 3.5, "y": 1},
{"matrix": [2, 2], "x": 4.5, "y": 1},
{"matrix": [3, 2], "x": 5.5, "y": 1},
{"matrix": [2, 3], "x": 6.5, "y": 1},
{"matrix": [3, 3], "x": 7.5, "y": 1},
{"matrix": [2, 4], "x": 8.5, "y": 1},
{"matrix": [3, 4], "x": 9.5, "y": 1},
{"matrix": [2, 5], "x": 10.5, "y": 1},
{"matrix": [3, 5], "x": 11.5, "y": 1},
{"matrix": [3, 6], "x": 12.5, "y": 1},
{"matrix": [4, 6], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [4, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [5, 0], "x": 1.75, "y": 2},
{"matrix": [4, 1], "x": 2.75, "y": 2},
{"matrix": [5, 1], "x": 3.75, "y": 2},
{"matrix": [4, 2], "x": 4.75, "y": 2},
{"matrix": [5, 2], "x": 5.75, "y": 2},
{"matrix": [4, 3], "x": 6.75, "y": 2},
{"matrix": [5, 3], "x": 7.75, "y": 2},
{"matrix": [4, 4], "x": 8.75, "y": 2},
{"matrix": [5, 4], "x": 9.75, "y": 2},
{"matrix": [4, 5], "x": 10.75, "y": 2},
{"matrix": [5, 5], "x": 11.75, "y": 2},
{"matrix": [4, 7], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [6, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [7, 0], "x": 2.25, "y": 3},
{"matrix": [6, 1], "x": 3.25, "y": 3},
{"matrix": [7, 1], "x": 4.25, "y": 3},
{"matrix": [6, 2], "x": 5.25, "y": 3},
{"matrix": [7, 2], "x": 6.25, "y": 3},
{"matrix": [6, 3], "x": 7.25, "y": 3},
{"matrix": [7, 3], "x": 8.25, "y": 3},
{"matrix": [6, 4], "x": 9.25, "y": 3},
{"matrix": [7, 4], "x": 10.25, "y": 3},
{"matrix": [6, 5], "x": 11.25, "y": 3},
{"matrix": [6, 6], "x": 12.25, "y": 3, "w": 2.75},
{"matrix": [8, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [9, 0], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [8, 1], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [9, 2], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [9, 4], "x": 10, "y": 4, "w": 1.25},
{"matrix": [8, 5], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [9, 5], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [9, 7], "x": 13.75, "y": 4, "w": 1.25}
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
]
},
"LAYOUT_60_ansi_split_spc": {
"layout": [
Move remaining `LAYOUT_all`s to data driven (#20463)
2023-04-26 23:45:43 +02:00
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [1, 0], "x": 1, "y": 0},
{"matrix": [0, 1], "x": 2, "y": 0},
{"matrix": [1, 1], "x": 3, "y": 0},
{"matrix": [0, 2], "x": 4, "y": 0},
{"matrix": [1, 2], "x": 5, "y": 0},
{"matrix": [0, 3], "x": 6, "y": 0},
{"matrix": [1, 3], "x": 7, "y": 0},
{"matrix": [0, 4], "x": 8, "y": 0},
{"matrix": [1, 4], "x": 9, "y": 0},
{"matrix": [0, 5], "x": 10, "y": 0},
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 6], "x": 12, "y": 0},
{"matrix": [2, 6], "x": 13, "y": 0, "w": 2},
{"matrix": [2, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [3, 0], "x": 1.5, "y": 1},
{"matrix": [2, 1], "x": 2.5, "y": 1},
{"matrix": [3, 1], "x": 3.5, "y": 1},
{"matrix": [2, 2], "x": 4.5, "y": 1},
{"matrix": [3, 2], "x": 5.5, "y": 1},
{"matrix": [2, 3], "x": 6.5, "y": 1},
{"matrix": [3, 3], "x": 7.5, "y": 1},
{"matrix": [2, 4], "x": 8.5, "y": 1},
{"matrix": [3, 4], "x": 9.5, "y": 1},
{"matrix": [2, 5], "x": 10.5, "y": 1},
{"matrix": [3, 5], "x": 11.5, "y": 1},
{"matrix": [3, 6], "x": 12.5, "y": 1},
{"matrix": [4, 6], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [4, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [5, 0], "x": 1.75, "y": 2},
{"matrix": [4, 1], "x": 2.75, "y": 2},
{"matrix": [5, 1], "x": 3.75, "y": 2},
{"matrix": [4, 2], "x": 4.75, "y": 2},
{"matrix": [5, 2], "x": 5.75, "y": 2},
{"matrix": [4, 3], "x": 6.75, "y": 2},
{"matrix": [5, 3], "x": 7.75, "y": 2},
{"matrix": [4, 4], "x": 8.75, "y": 2},
{"matrix": [5, 4], "x": 9.75, "y": 2},
{"matrix": [4, 5], "x": 10.75, "y": 2},
{"matrix": [5, 5], "x": 11.75, "y": 2},
{"matrix": [4, 7], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [6, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [7, 0], "x": 2.25, "y": 3},
{"matrix": [6, 1], "x": 3.25, "y": 3},
{"matrix": [7, 1], "x": 4.25, "y": 3},
{"matrix": [6, 2], "x": 5.25, "y": 3},
{"matrix": [7, 2], "x": 6.25, "y": 3},
{"matrix": [6, 3], "x": 7.25, "y": 3},
{"matrix": [7, 3], "x": 8.25, "y": 3},
{"matrix": [6, 4], "x": 9.25, "y": 3},
{"matrix": [7, 4], "x": 10.25, "y": 3},
{"matrix": [6, 5], "x": 11.25, "y": 3},
{"matrix": [6, 6], "x": 12.25, "y": 3, "w": 2.75},
{"matrix": [8, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [9, 0], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [8, 1], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [8, 2], "x": 3.75, "y": 4, "w": 2.25},
{"matrix": [9, 2], "x": 6, "y": 4, "w": 1.25},
{"matrix": [8, 4], "x": 7.25, "y": 4, "w": 2.75},
{"matrix": [9, 4], "x": 10, "y": 4, "w": 1.25},
{"matrix": [8, 5], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [9, 5], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [9, 7], "x": 13.75, "y": 4, "w": 1.25}
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
]
},
"LAYOUT_60_ansi_split_bs_spc": {
"layout": [
Move remaining `LAYOUT_all`s to data driven (#20463)
2023-04-26 23:45:43 +02:00
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [1, 0], "x": 1, "y": 0},
{"matrix": [0, 1], "x": 2, "y": 0},
{"matrix": [1, 1], "x": 3, "y": 0},
{"matrix": [0, 2], "x": 4, "y": 0},
{"matrix": [1, 2], "x": 5, "y": 0},
{"matrix": [0, 3], "x": 6, "y": 0},
{"matrix": [1, 3], "x": 7, "y": 0},
{"matrix": [0, 4], "x": 8, "y": 0},
{"matrix": [1, 4], "x": 9, "y": 0},
{"matrix": [0, 5], "x": 10, "y": 0},
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 6], "x": 12, "y": 0},
{"matrix": [2, 6], "x": 13, "y": 0},
{"matrix": [1, 7], "x": 14, "y": 0},
{"matrix": [2, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [3, 0], "x": 1.5, "y": 1},
{"matrix": [2, 1], "x": 2.5, "y": 1},
{"matrix": [3, 1], "x": 3.5, "y": 1},
{"matrix": [2, 2], "x": 4.5, "y": 1},
{"matrix": [3, 2], "x": 5.5, "y": 1},
{"matrix": [2, 3], "x": 6.5, "y": 1},
{"matrix": [3, 3], "x": 7.5, "y": 1},
{"matrix": [2, 4], "x": 8.5, "y": 1},
{"matrix": [3, 4], "x": 9.5, "y": 1},
{"matrix": [2, 5], "x": 10.5, "y": 1},
{"matrix": [3, 5], "x": 11.5, "y": 1},
{"matrix": [3, 6], "x": 12.5, "y": 1},
{"matrix": [4, 6], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [4, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [5, 0], "x": 1.75, "y": 2},
{"matrix": [4, 1], "x": 2.75, "y": 2},
{"matrix": [5, 1], "x": 3.75, "y": 2},
{"matrix": [4, 2], "x": 4.75, "y": 2},
{"matrix": [5, 2], "x": 5.75, "y": 2},
{"matrix": [4, 3], "x": 6.75, "y": 2},
{"matrix": [5, 3], "x": 7.75, "y": 2},
{"matrix": [4, 4], "x": 8.75, "y": 2},
{"matrix": [5, 4], "x": 9.75, "y": 2},
{"matrix": [4, 5], "x": 10.75, "y": 2},
{"matrix": [5, 5], "x": 11.75, "y": 2},
{"matrix": [4, 7], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [6, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [7, 0], "x": 2.25, "y": 3},
{"matrix": [6, 1], "x": 3.25, "y": 3},
{"matrix": [7, 1], "x": 4.25, "y": 3},
{"matrix": [6, 2], "x": 5.25, "y": 3},
{"matrix": [7, 2], "x": 6.25, "y": 3},
{"matrix": [6, 3], "x": 7.25, "y": 3},
{"matrix": [7, 3], "x": 8.25, "y": 3},
{"matrix": [6, 4], "x": 9.25, "y": 3},
{"matrix": [7, 4], "x": 10.25, "y": 3},
{"matrix": [6, 5], "x": 11.25, "y": 3},
{"matrix": [6, 6], "x": 12.25, "y": 3, "w": 2.75},
{"matrix": [8, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [9, 0], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [8, 1], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [8, 2], "x": 3.75, "y": 4, "w": 2.25},
{"matrix": [9, 2], "x": 6, "y": 4, "w": 1.25},
{"matrix": [8, 4], "x": 7.25, "y": 4, "w": 2.75},
{"matrix": [9, 4], "x": 10, "y": 4, "w": 1.25},
{"matrix": [8, 5], "x": 11.25, "y": 4, "w": 1.25},
{"matrix": [9, 5], "x": 12.5, "y": 4, "w": 1.25},
{"matrix": [9, 7], "x": 13.75, "y": 4, "w": 1.25}
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
]
},
Krush60 Solder Refactor (#16029) * solder.h: add matrix diagram * solder.h: remove unnecessary comments * rework LAYOUT_60_iso to LAYOUT_60_isoenter_split_bs True ISO layouts are not supported on this keyboard because the PCB lacks support for split Left Shift. Renames the `iso` to `isoenter` to specify this. - denotes use of Split Backspace - move Backslash keycode to home row * info.json: remove trailing whitespace * info.json: clean up Sort the layout trees into the same order as `solder.h`, and remove the `LAYOUT_60_all` tree (doesn't exist in source). * solder.h: align positional arguments Helps me proof-read the layouts at a glance. No logic change. * fix syntax errors in keymaps * remove ISO layouts As previously noted, ISO layouts are not supported due to the PCB's lack of support for split Left Shift. * rename LAYOUT_60_ansi_tsangan_split_bs to LAYOUT_60_tsangan_hhkb Also renames `60_tsangan_splt_bs` keymap to `60_tsangan_hhkb`. * rename LAYOUT_60_ansi_tsangan to LAYOUT_60_ansi_tsangan_split_rshift Also renames `60_tsangan` keymap to `60_ansi_tsangan_split_rshift`. * rename LAYOUT_60_ansi_arrow_split_bs_7u_spc to LAYOUT_60_ansi_arrow_tsangan_split_bs Also rename `60_ansi_arrow_splt_bs_7u` to `60_ansi_arrow_tsangan_split_bs`. * rename LAYOUT_60_ansi_arrow_7u_spc to LAYOUT_60_ansi_arrow_tsangan Also renames `60_ansi_arrow_7u` keymap to `60_ansi_arrow_tsangan`. * rename keymaps based on layout macro used Making this easier to track in my head while I work on it. * info.json: fix syntax errors * rename LAYOUT_60_ansi_split_bs_7u_spc to LAYOUT_60_ansi_tsangan_split_bs - renames `60_ansi_split_bs_7u_spc` keymap to `60_ansi_tsangan_split_bs` - removes `layout_aliases` entry from `info.json` (creates incompatible data conflict) * rename LAYOUT_60_ansi_7u_spc to LAYOUT_60_ansi_tsangan - renames `60_ansi_7u_spc` keymap to `60_ansi_tsangan` * info.json: remove LAYOUT_60_ansi_tsangan layout_aliases entry Causes an incompatible data conflict. * add second layer to 60_ansi keymap * update via keymap Now matches the behaviour of the default keymap. * fix syntax errors in keymaps, take 2 * add RGB and Navigation keycodes Adds RGB and Navigation keycodes to the `60_isoenter_split_bs`, `default` and `via` keymaps.
2022-01-26 20:23:18 +01:00
"LAYOUT_60_ansi_tsangan": {
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
"layout": [
Move remaining `LAYOUT_all`s to data driven (#20463)
2023-04-26 23:45:43 +02:00
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [1, 0], "x": 1, "y": 0},
{"matrix": [0, 1], "x": 2, "y": 0},
{"matrix": [1, 1], "x": 3, "y": 0},
{"matrix": [0, 2], "x": 4, "y": 0},
{"matrix": [1, 2], "x": 5, "y": 0},
{"matrix": [0, 3], "x": 6, "y": 0},
{"matrix": [1, 3], "x": 7, "y": 0},
{"matrix": [0, 4], "x": 8, "y": 0},
{"matrix": [1, 4], "x": 9, "y": 0},
{"matrix": [0, 5], "x": 10, "y": 0},
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 6], "x": 12, "y": 0},
{"matrix": [2, 6], "x": 13, "y": 0, "w": 2},
{"matrix": [2, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [3, 0], "x": 1.5, "y": 1},
{"matrix": [2, 1], "x": 2.5, "y": 1},
{"matrix": [3, 1], "x": 3.5, "y": 1},
{"matrix": [2, 2], "x": 4.5, "y": 1},
{"matrix": [3, 2], "x": 5.5, "y": 1},
{"matrix": [2, 3], "x": 6.5, "y": 1},
{"matrix": [3, 3], "x": 7.5, "y": 1},
{"matrix": [2, 4], "x": 8.5, "y": 1},
{"matrix": [3, 4], "x": 9.5, "y": 1},
{"matrix": [2, 5], "x": 10.5, "y": 1},
{"matrix": [3, 5], "x": 11.5, "y": 1},
{"matrix": [3, 6], "x": 12.5, "y": 1},
{"matrix": [4, 6], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [4, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [5, 0], "x": 1.75, "y": 2},
{"matrix": [4, 1], "x": 2.75, "y": 2},
{"matrix": [5, 1], "x": 3.75, "y": 2},
{"matrix": [4, 2], "x": 4.75, "y": 2},
{"matrix": [5, 2], "x": 5.75, "y": 2},
{"matrix": [4, 3], "x": 6.75, "y": 2},
{"matrix": [5, 3], "x": 7.75, "y": 2},
{"matrix": [4, 4], "x": 8.75, "y": 2},
{"matrix": [5, 4], "x": 9.75, "y": 2},
{"matrix": [4, 5], "x": 10.75, "y": 2},
{"matrix": [5, 5], "x": 11.75, "y": 2},
{"matrix": [4, 7], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [6, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [7, 0], "x": 2.25, "y": 3},
{"matrix": [6, 1], "x": 3.25, "y": 3},
{"matrix": [7, 1], "x": 4.25, "y": 3},
{"matrix": [6, 2], "x": 5.25, "y": 3},
{"matrix": [7, 2], "x": 6.25, "y": 3},
{"matrix": [6, 3], "x": 7.25, "y": 3},
{"matrix": [7, 3], "x": 8.25, "y": 3},
{"matrix": [6, 4], "x": 9.25, "y": 3},
{"matrix": [7, 4], "x": 10.25, "y": 3},
{"matrix": [6, 5], "x": 11.25, "y": 3},
{"matrix": [6, 6], "x": 12.25, "y": 3, "w": 2.75},
{"matrix": [8, 0], "x": 0, "y": 4, "w": 1.5},
{"matrix": [9, 0], "x": 1.5, "y": 4},
{"matrix": [8, 1], "x": 2.5, "y": 4, "w": 1.5},
{"matrix": [9, 2], "x": 4, "y": 4, "w": 7},
{"matrix": [8, 5], "x": 11, "y": 4, "w": 1.5},
{"matrix": [9, 5], "x": 12.5, "y": 4},
{"matrix": [9, 7], "x": 13.5, "y": 4, "w": 1.5}
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
]
},
Krush60 Solder Refactor (#16029) * solder.h: add matrix diagram * solder.h: remove unnecessary comments * rework LAYOUT_60_iso to LAYOUT_60_isoenter_split_bs True ISO layouts are not supported on this keyboard because the PCB lacks support for split Left Shift. Renames the `iso` to `isoenter` to specify this. - denotes use of Split Backspace - move Backslash keycode to home row * info.json: remove trailing whitespace * info.json: clean up Sort the layout trees into the same order as `solder.h`, and remove the `LAYOUT_60_all` tree (doesn't exist in source). * solder.h: align positional arguments Helps me proof-read the layouts at a glance. No logic change. * fix syntax errors in keymaps * remove ISO layouts As previously noted, ISO layouts are not supported due to the PCB's lack of support for split Left Shift. * rename LAYOUT_60_ansi_tsangan_split_bs to LAYOUT_60_tsangan_hhkb Also renames `60_tsangan_splt_bs` keymap to `60_tsangan_hhkb`. * rename LAYOUT_60_ansi_tsangan to LAYOUT_60_ansi_tsangan_split_rshift Also renames `60_tsangan` keymap to `60_ansi_tsangan_split_rshift`. * rename LAYOUT_60_ansi_arrow_split_bs_7u_spc to LAYOUT_60_ansi_arrow_tsangan_split_bs Also rename `60_ansi_arrow_splt_bs_7u` to `60_ansi_arrow_tsangan_split_bs`. * rename LAYOUT_60_ansi_arrow_7u_spc to LAYOUT_60_ansi_arrow_tsangan Also renames `60_ansi_arrow_7u` keymap to `60_ansi_arrow_tsangan`. * rename keymaps based on layout macro used Making this easier to track in my head while I work on it. * info.json: fix syntax errors * rename LAYOUT_60_ansi_split_bs_7u_spc to LAYOUT_60_ansi_tsangan_split_bs - renames `60_ansi_split_bs_7u_spc` keymap to `60_ansi_tsangan_split_bs` - removes `layout_aliases` entry from `info.json` (creates incompatible data conflict) * rename LAYOUT_60_ansi_7u_spc to LAYOUT_60_ansi_tsangan - renames `60_ansi_7u_spc` keymap to `60_ansi_tsangan` * info.json: remove LAYOUT_60_ansi_tsangan layout_aliases entry Causes an incompatible data conflict. * add second layer to 60_ansi keymap * update via keymap Now matches the behaviour of the default keymap. * fix syntax errors in keymaps, take 2 * add RGB and Navigation keycodes Adds RGB and Navigation keycodes to the `60_isoenter_split_bs`, `default` and `via` keymaps.
2022-01-26 20:23:18 +01:00
"LAYOUT_60_ansi_tsangan_split_bs": {
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
"layout": [
Move remaining `LAYOUT_all`s to data driven (#20463)
2023-04-26 23:45:43 +02:00
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [1, 0], "x": 1, "y": 0},
{"matrix": [0, 1], "x": 2, "y": 0},
{"matrix": [1, 1], "x": 3, "y": 0},
{"matrix": [0, 2], "x": 4, "y": 0},
{"matrix": [1, 2], "x": 5, "y": 0},
{"matrix": [0, 3], "x": 6, "y": 0},
{"matrix": [1, 3], "x": 7, "y": 0},
{"matrix": [0, 4], "x": 8, "y": 0},
{"matrix": [1, 4], "x": 9, "y": 0},
{"matrix": [0, 5], "x": 10, "y": 0},
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 6], "x": 12, "y": 0},
{"matrix": [2, 6], "x": 13, "y": 0},
{"matrix": [1, 7], "x": 14, "y": 0},
{"matrix": [2, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [3, 0], "x": 1.5, "y": 1},
{"matrix": [2, 1], "x": 2.5, "y": 1},
{"matrix": [3, 1], "x": 3.5, "y": 1},
{"matrix": [2, 2], "x": 4.5, "y": 1},
{"matrix": [3, 2], "x": 5.5, "y": 1},
{"matrix": [2, 3], "x": 6.5, "y": 1},
{"matrix": [3, 3], "x": 7.5, "y": 1},
{"matrix": [2, 4], "x": 8.5, "y": 1},
{"matrix": [3, 4], "x": 9.5, "y": 1},
{"matrix": [2, 5], "x": 10.5, "y": 1},
{"matrix": [3, 5], "x": 11.5, "y": 1},
{"matrix": [3, 6], "x": 12.5, "y": 1},
{"matrix": [4, 6], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [4, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [5, 0], "x": 1.75, "y": 2},
{"matrix": [4, 1], "x": 2.75, "y": 2},
{"matrix": [5, 1], "x": 3.75, "y": 2},
{"matrix": [4, 2], "x": 4.75, "y": 2},
{"matrix": [5, 2], "x": 5.75, "y": 2},
{"matrix": [4, 3], "x": 6.75, "y": 2},
{"matrix": [5, 3], "x": 7.75, "y": 2},
{"matrix": [4, 4], "x": 8.75, "y": 2},
{"matrix": [5, 4], "x": 9.75, "y": 2},
{"matrix": [4, 5], "x": 10.75, "y": 2},
{"matrix": [5, 5], "x": 11.75, "y": 2},
{"matrix": [4, 7], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [6, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [7, 0], "x": 2.25, "y": 3},
{"matrix": [6, 1], "x": 3.25, "y": 3},
{"matrix": [7, 1], "x": 4.25, "y": 3},
{"matrix": [6, 2], "x": 5.25, "y": 3},
{"matrix": [7, 2], "x": 6.25, "y": 3},
{"matrix": [6, 3], "x": 7.25, "y": 3},
{"matrix": [7, 3], "x": 8.25, "y": 3},
{"matrix": [6, 4], "x": 9.25, "y": 3},
{"matrix": [7, 4], "x": 10.25, "y": 3},
{"matrix": [6, 5], "x": 11.25, "y": 3},
{"matrix": [6, 6], "x": 12.25, "y": 3, "w": 2.75},
{"matrix": [8, 0], "x": 0, "y": 4, "w": 1.5},
{"matrix": [9, 0], "x": 1.5, "y": 4},
{"matrix": [8, 1], "x": 2.5, "y": 4, "w": 1.5},
{"matrix": [9, 2], "x": 4, "y": 4, "w": 7},
{"matrix": [8, 5], "x": 11, "y": 4, "w": 1.5},
{"matrix": [9, 5], "x": 12.5, "y": 4},
{"matrix": [9, 7], "x": 13.5, "y": 4, "w": 1.5}
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
]
},
"LAYOUT_60_ansi_arrow_split_bs": {
"layout": [
Move remaining `LAYOUT_all`s to data driven (#20463)
2023-04-26 23:45:43 +02:00
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [1, 0], "x": 1, "y": 0},
{"matrix": [0, 1], "x": 2, "y": 0},
{"matrix": [1, 1], "x": 3, "y": 0},
{"matrix": [0, 2], "x": 4, "y": 0},
{"matrix": [1, 2], "x": 5, "y": 0},
{"matrix": [0, 3], "x": 6, "y": 0},
{"matrix": [1, 3], "x": 7, "y": 0},
{"matrix": [0, 4], "x": 8, "y": 0},
{"matrix": [1, 4], "x": 9, "y": 0},
{"matrix": [0, 5], "x": 10, "y": 0},
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 6], "x": 12, "y": 0},
{"matrix": [2, 6], "x": 13, "y": 0},
{"matrix": [1, 7], "x": 14, "y": 0},
{"matrix": [2, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [3, 0], "x": 1.5, "y": 1},
{"matrix": [2, 1], "x": 2.5, "y": 1},
{"matrix": [3, 1], "x": 3.5, "y": 1},
{"matrix": [2, 2], "x": 4.5, "y": 1},
{"matrix": [3, 2], "x": 5.5, "y": 1},
{"matrix": [2, 3], "x": 6.5, "y": 1},
{"matrix": [3, 3], "x": 7.5, "y": 1},
{"matrix": [2, 4], "x": 8.5, "y": 1},
{"matrix": [3, 4], "x": 9.5, "y": 1},
{"matrix": [2, 5], "x": 10.5, "y": 1},
{"matrix": [3, 5], "x": 11.5, "y": 1},
{"matrix": [3, 6], "x": 12.5, "y": 1},
{"matrix": [4, 6], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [4, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [5, 0], "x": 1.75, "y": 2},
{"matrix": [4, 1], "x": 2.75, "y": 2},
{"matrix": [5, 1], "x": 3.75, "y": 2},
{"matrix": [4, 2], "x": 4.75, "y": 2},
{"matrix": [5, 2], "x": 5.75, "y": 2},
{"matrix": [4, 3], "x": 6.75, "y": 2},
{"matrix": [5, 3], "x": 7.75, "y": 2},
{"matrix": [4, 4], "x": 8.75, "y": 2},
{"matrix": [5, 4], "x": 9.75, "y": 2},
{"matrix": [4, 5], "x": 10.75, "y": 2},
{"matrix": [5, 5], "x": 11.75, "y": 2},
{"matrix": [4, 7], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [6, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [7, 0], "x": 2.25, "y": 3},
{"matrix": [6, 1], "x": 3.25, "y": 3},
{"matrix": [7, 1], "x": 4.25, "y": 3},
{"matrix": [6, 2], "x": 5.25, "y": 3},
{"matrix": [7, 2], "x": 6.25, "y": 3},
{"matrix": [6, 3], "x": 7.25, "y": 3},
{"matrix": [7, 3], "x": 8.25, "y": 3},
{"matrix": [6, 4], "x": 9.25, "y": 3},
{"matrix": [7, 4], "x": 10.25, "y": 3},
{"matrix": [7, 5], "x": 11.25, "y": 3, "w": 1.75},
{"matrix": [6, 6], "x": 13, "y": 3},
{"matrix": [7, 7], "x": 14, "y": 3},
{"matrix": [8, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [9, 0], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [8, 1], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [9, 2], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [9, 4], "x": 10, "y": 4},
{"matrix": [8, 5], "x": 11, "y": 4},
{"matrix": [8, 6], "x": 12, "y": 4},
{"matrix": [9, 5], "x": 13, "y": 4},
{"matrix": [9, 7], "x": 14, "y": 4}
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
]
},
"LAYOUT_60_ansi_arrow_split_spc": {
"layout": [
Move remaining `LAYOUT_all`s to data driven (#20463)
2023-04-26 23:45:43 +02:00
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [1, 0], "x": 1, "y": 0},
{"matrix": [0, 1], "x": 2, "y": 0},
{"matrix": [1, 1], "x": 3, "y": 0},
{"matrix": [0, 2], "x": 4, "y": 0},
{"matrix": [1, 2], "x": 5, "y": 0},
{"matrix": [0, 3], "x": 6, "y": 0},
{"matrix": [1, 3], "x": 7, "y": 0},
{"matrix": [0, 4], "x": 8, "y": 0},
{"matrix": [1, 4], "x": 9, "y": 0},
{"matrix": [0, 5], "x": 10, "y": 0},
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 6], "x": 12, "y": 0},
{"matrix": [2, 6], "x": 13, "y": 0, "w": 2},
{"matrix": [2, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [3, 0], "x": 1.5, "y": 1},
{"matrix": [2, 1], "x": 2.5, "y": 1},
{"matrix": [3, 1], "x": 3.5, "y": 1},
{"matrix": [2, 2], "x": 4.5, "y": 1},
{"matrix": [3, 2], "x": 5.5, "y": 1},
{"matrix": [2, 3], "x": 6.5, "y": 1},
{"matrix": [3, 3], "x": 7.5, "y": 1},
{"matrix": [2, 4], "x": 8.5, "y": 1},
{"matrix": [3, 4], "x": 9.5, "y": 1},
{"matrix": [2, 5], "x": 10.5, "y": 1},
{"matrix": [3, 5], "x": 11.5, "y": 1},
{"matrix": [3, 6], "x": 12.5, "y": 1},
{"matrix": [4, 6], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [4, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [5, 0], "x": 1.75, "y": 2},
{"matrix": [4, 1], "x": 2.75, "y": 2},
{"matrix": [5, 1], "x": 3.75, "y": 2},
{"matrix": [4, 2], "x": 4.75, "y": 2},
{"matrix": [5, 2], "x": 5.75, "y": 2},
{"matrix": [4, 3], "x": 6.75, "y": 2},
{"matrix": [5, 3], "x": 7.75, "y": 2},
{"matrix": [4, 4], "x": 8.75, "y": 2},
{"matrix": [5, 4], "x": 9.75, "y": 2},
{"matrix": [4, 5], "x": 10.75, "y": 2},
{"matrix": [5, 5], "x": 11.75, "y": 2},
{"matrix": [4, 7], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [6, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [7, 0], "x": 2.25, "y": 3},
{"matrix": [6, 1], "x": 3.25, "y": 3},
{"matrix": [7, 1], "x": 4.25, "y": 3},
{"matrix": [6, 2], "x": 5.25, "y": 3},
{"matrix": [7, 2], "x": 6.25, "y": 3},
{"matrix": [6, 3], "x": 7.25, "y": 3},
{"matrix": [7, 3], "x": 8.25, "y": 3},
{"matrix": [6, 4], "x": 9.25, "y": 3},
{"matrix": [7, 4], "x": 10.25, "y": 3},
{"matrix": [7, 5], "x": 11.25, "y": 3, "w": 1.75},
{"matrix": [6, 6], "x": 13, "y": 3},
{"matrix": [7, 7], "x": 14, "y": 3},
{"matrix": [8, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [9, 0], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [8, 1], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [8, 2], "x": 3.75, "y": 4, "w": 2.25},
{"matrix": [9, 2], "x": 6, "y": 4, "w": 1.25},
{"matrix": [8, 4], "x": 7.25, "y": 4, "w": 2.75},
{"matrix": [9, 4], "x": 10, "y": 4},
{"matrix": [8, 5], "x": 11, "y": 4},
{"matrix": [8, 6], "x": 12, "y": 4},
{"matrix": [9, 5], "x": 13, "y": 4},
{"matrix": [9, 7], "x": 14, "y": 4}
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
]
},
"LAYOUT_60_ansi_arrow_split_bs_spc": {
"layout": [
Move remaining `LAYOUT_all`s to data driven (#20463)
2023-04-26 23:45:43 +02:00
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [1, 0], "x": 1, "y": 0},
{"matrix": [0, 1], "x": 2, "y": 0},
{"matrix": [1, 1], "x": 3, "y": 0},
{"matrix": [0, 2], "x": 4, "y": 0},
{"matrix": [1, 2], "x": 5, "y": 0},
{"matrix": [0, 3], "x": 6, "y": 0},
{"matrix": [1, 3], "x": 7, "y": 0},
{"matrix": [0, 4], "x": 8, "y": 0},
{"matrix": [1, 4], "x": 9, "y": 0},
{"matrix": [0, 5], "x": 10, "y": 0},
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 6], "x": 12, "y": 0},
{"matrix": [2, 6], "x": 13, "y": 0},
{"matrix": [1, 7], "x": 14, "y": 0},
{"matrix": [2, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [3, 0], "x": 1.5, "y": 1},
{"matrix": [2, 1], "x": 2.5, "y": 1},
{"matrix": [3, 1], "x": 3.5, "y": 1},
{"matrix": [2, 2], "x": 4.5, "y": 1},
{"matrix": [3, 2], "x": 5.5, "y": 1},
{"matrix": [2, 3], "x": 6.5, "y": 1},
{"matrix": [3, 3], "x": 7.5, "y": 1},
{"matrix": [2, 4], "x": 8.5, "y": 1},
{"matrix": [3, 4], "x": 9.5, "y": 1},
{"matrix": [2, 5], "x": 10.5, "y": 1},
{"matrix": [3, 5], "x": 11.5, "y": 1},
{"matrix": [3, 6], "x": 12.5, "y": 1},
{"matrix": [4, 6], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [4, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [5, 0], "x": 1.75, "y": 2},
{"matrix": [4, 1], "x": 2.75, "y": 2},
{"matrix": [5, 1], "x": 3.75, "y": 2},
{"matrix": [4, 2], "x": 4.75, "y": 2},
{"matrix": [5, 2], "x": 5.75, "y": 2},
{"matrix": [4, 3], "x": 6.75, "y": 2},
{"matrix": [5, 3], "x": 7.75, "y": 2},
{"matrix": [4, 4], "x": 8.75, "y": 2},
{"matrix": [5, 4], "x": 9.75, "y": 2},
{"matrix": [4, 5], "x": 10.75, "y": 2},
{"matrix": [5, 5], "x": 11.75, "y": 2},
{"matrix": [4, 7], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [6, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [7, 0], "x": 2.25, "y": 3},
{"matrix": [6, 1], "x": 3.25, "y": 3},
{"matrix": [7, 1], "x": 4.25, "y": 3},
{"matrix": [6, 2], "x": 5.25, "y": 3},
{"matrix": [7, 2], "x": 6.25, "y": 3},
{"matrix": [6, 3], "x": 7.25, "y": 3},
{"matrix": [7, 3], "x": 8.25, "y": 3},
{"matrix": [6, 4], "x": 9.25, "y": 3},
{"matrix": [7, 4], "x": 10.25, "y": 3},
{"matrix": [7, 5], "x": 11.25, "y": 3, "w": 1.75},
{"matrix": [6, 6], "x": 13, "y": 3},
{"matrix": [7, 7], "x": 14, "y": 3},
{"matrix": [8, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [9, 0], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [8, 1], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [8, 2], "x": 3.75, "y": 4, "w": 2.25},
{"matrix": [9, 2], "x": 6, "y": 4, "w": 1.25},
{"matrix": [8, 4], "x": 7.25, "y": 4, "w": 2.75},
{"matrix": [9, 4], "x": 10, "y": 4},
{"matrix": [8, 5], "x": 11, "y": 4},
{"matrix": [8, 6], "x": 12, "y": 4},
{"matrix": [9, 5], "x": 13, "y": 4},
{"matrix": [9, 7], "x": 14, "y": 4}
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
]
},
Krush60 Solder Refactor (#16029) * solder.h: add matrix diagram * solder.h: remove unnecessary comments * rework LAYOUT_60_iso to LAYOUT_60_isoenter_split_bs True ISO layouts are not supported on this keyboard because the PCB lacks support for split Left Shift. Renames the `iso` to `isoenter` to specify this. - denotes use of Split Backspace - move Backslash keycode to home row * info.json: remove trailing whitespace * info.json: clean up Sort the layout trees into the same order as `solder.h`, and remove the `LAYOUT_60_all` tree (doesn't exist in source). * solder.h: align positional arguments Helps me proof-read the layouts at a glance. No logic change. * fix syntax errors in keymaps * remove ISO layouts As previously noted, ISO layouts are not supported due to the PCB's lack of support for split Left Shift. * rename LAYOUT_60_ansi_tsangan_split_bs to LAYOUT_60_tsangan_hhkb Also renames `60_tsangan_splt_bs` keymap to `60_tsangan_hhkb`. * rename LAYOUT_60_ansi_tsangan to LAYOUT_60_ansi_tsangan_split_rshift Also renames `60_tsangan` keymap to `60_ansi_tsangan_split_rshift`. * rename LAYOUT_60_ansi_arrow_split_bs_7u_spc to LAYOUT_60_ansi_arrow_tsangan_split_bs Also rename `60_ansi_arrow_splt_bs_7u` to `60_ansi_arrow_tsangan_split_bs`. * rename LAYOUT_60_ansi_arrow_7u_spc to LAYOUT_60_ansi_arrow_tsangan Also renames `60_ansi_arrow_7u` keymap to `60_ansi_arrow_tsangan`. * rename keymaps based on layout macro used Making this easier to track in my head while I work on it. * info.json: fix syntax errors * rename LAYOUT_60_ansi_split_bs_7u_spc to LAYOUT_60_ansi_tsangan_split_bs - renames `60_ansi_split_bs_7u_spc` keymap to `60_ansi_tsangan_split_bs` - removes `layout_aliases` entry from `info.json` (creates incompatible data conflict) * rename LAYOUT_60_ansi_7u_spc to LAYOUT_60_ansi_tsangan - renames `60_ansi_7u_spc` keymap to `60_ansi_tsangan` * info.json: remove LAYOUT_60_ansi_tsangan layout_aliases entry Causes an incompatible data conflict. * add second layer to 60_ansi keymap * update via keymap Now matches the behaviour of the default keymap. * fix syntax errors in keymaps, take 2 * add RGB and Navigation keycodes Adds RGB and Navigation keycodes to the `60_isoenter_split_bs`, `default` and `via` keymaps.
2022-01-26 20:23:18 +01:00
"LAYOUT_60_ansi_arrow_tsangan": {
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
"layout": [
Move remaining `LAYOUT_all`s to data driven (#20463)
2023-04-26 23:45:43 +02:00
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [1, 0], "x": 1, "y": 0},
{"matrix": [0, 1], "x": 2, "y": 0},
{"matrix": [1, 1], "x": 3, "y": 0},
{"matrix": [0, 2], "x": 4, "y": 0},
{"matrix": [1, 2], "x": 5, "y": 0},
{"matrix": [0, 3], "x": 6, "y": 0},
{"matrix": [1, 3], "x": 7, "y": 0},
{"matrix": [0, 4], "x": 8, "y": 0},
{"matrix": [1, 4], "x": 9, "y": 0},
{"matrix": [0, 5], "x": 10, "y": 0},
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 6], "x": 12, "y": 0},
{"matrix": [2, 6], "x": 13, "y": 0, "w": 2},
{"matrix": [2, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [3, 0], "x": 1.5, "y": 1},
{"matrix": [2, 1], "x": 2.5, "y": 1},
{"matrix": [3, 1], "x": 3.5, "y": 1},
{"matrix": [2, 2], "x": 4.5, "y": 1},
{"matrix": [3, 2], "x": 5.5, "y": 1},
{"matrix": [2, 3], "x": 6.5, "y": 1},
{"matrix": [3, 3], "x": 7.5, "y": 1},
{"matrix": [2, 4], "x": 8.5, "y": 1},
{"matrix": [3, 4], "x": 9.5, "y": 1},
{"matrix": [2, 5], "x": 10.5, "y": 1},
{"matrix": [3, 5], "x": 11.5, "y": 1},
{"matrix": [3, 6], "x": 12.5, "y": 1},
{"matrix": [4, 6], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [4, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [5, 0], "x": 1.75, "y": 2},
{"matrix": [4, 1], "x": 2.75, "y": 2},
{"matrix": [5, 1], "x": 3.75, "y": 2},
{"matrix": [4, 2], "x": 4.75, "y": 2},
{"matrix": [5, 2], "x": 5.75, "y": 2},
{"matrix": [4, 3], "x": 6.75, "y": 2},
{"matrix": [5, 3], "x": 7.75, "y": 2},
{"matrix": [4, 4], "x": 8.75, "y": 2},
{"matrix": [5, 4], "x": 9.75, "y": 2},
{"matrix": [4, 5], "x": 10.75, "y": 2},
{"matrix": [5, 5], "x": 11.75, "y": 2},
{"matrix": [4, 7], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [6, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [7, 0], "x": 2.25, "y": 3},
{"matrix": [6, 1], "x": 3.25, "y": 3},
{"matrix": [7, 1], "x": 4.25, "y": 3},
{"matrix": [6, 2], "x": 5.25, "y": 3},
{"matrix": [7, 2], "x": 6.25, "y": 3},
{"matrix": [6, 3], "x": 7.25, "y": 3},
{"matrix": [7, 3], "x": 8.25, "y": 3},
{"matrix": [6, 4], "x": 9.25, "y": 3},
{"matrix": [7, 4], "x": 10.25, "y": 3},
{"matrix": [7, 5], "x": 11.25, "y": 3, "w": 1.75},
{"matrix": [6, 6], "x": 13, "y": 3},
{"matrix": [7, 7], "x": 14, "y": 3},
{"matrix": [8, 0], "x": 0, "y": 4, "w": 1.5},
{"matrix": [9, 0], "x": 1.5, "y": 4},
{"matrix": [8, 1], "x": 2.5, "y": 4, "w": 1.5},
{"matrix": [9, 2], "x": 4, "y": 4, "w": 7},
{"matrix": [8, 5], "x": 11, "y": 4},
{"matrix": [8, 6], "x": 12, "y": 4},
{"matrix": [9, 5], "x": 13, "y": 4},
{"matrix": [9, 7], "x": 14, "y": 4}
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
]
},
Krush60 Solder Refactor (#16029) * solder.h: add matrix diagram * solder.h: remove unnecessary comments * rework LAYOUT_60_iso to LAYOUT_60_isoenter_split_bs True ISO layouts are not supported on this keyboard because the PCB lacks support for split Left Shift. Renames the `iso` to `isoenter` to specify this. - denotes use of Split Backspace - move Backslash keycode to home row * info.json: remove trailing whitespace * info.json: clean up Sort the layout trees into the same order as `solder.h`, and remove the `LAYOUT_60_all` tree (doesn't exist in source). * solder.h: align positional arguments Helps me proof-read the layouts at a glance. No logic change. * fix syntax errors in keymaps * remove ISO layouts As previously noted, ISO layouts are not supported due to the PCB's lack of support for split Left Shift. * rename LAYOUT_60_ansi_tsangan_split_bs to LAYOUT_60_tsangan_hhkb Also renames `60_tsangan_splt_bs` keymap to `60_tsangan_hhkb`. * rename LAYOUT_60_ansi_tsangan to LAYOUT_60_ansi_tsangan_split_rshift Also renames `60_tsangan` keymap to `60_ansi_tsangan_split_rshift`. * rename LAYOUT_60_ansi_arrow_split_bs_7u_spc to LAYOUT_60_ansi_arrow_tsangan_split_bs Also rename `60_ansi_arrow_splt_bs_7u` to `60_ansi_arrow_tsangan_split_bs`. * rename LAYOUT_60_ansi_arrow_7u_spc to LAYOUT_60_ansi_arrow_tsangan Also renames `60_ansi_arrow_7u` keymap to `60_ansi_arrow_tsangan`. * rename keymaps based on layout macro used Making this easier to track in my head while I work on it. * info.json: fix syntax errors * rename LAYOUT_60_ansi_split_bs_7u_spc to LAYOUT_60_ansi_tsangan_split_bs - renames `60_ansi_split_bs_7u_spc` keymap to `60_ansi_tsangan_split_bs` - removes `layout_aliases` entry from `info.json` (creates incompatible data conflict) * rename LAYOUT_60_ansi_7u_spc to LAYOUT_60_ansi_tsangan - renames `60_ansi_7u_spc` keymap to `60_ansi_tsangan` * info.json: remove LAYOUT_60_ansi_tsangan layout_aliases entry Causes an incompatible data conflict. * add second layer to 60_ansi keymap * update via keymap Now matches the behaviour of the default keymap. * fix syntax errors in keymaps, take 2 * add RGB and Navigation keycodes Adds RGB and Navigation keycodes to the `60_isoenter_split_bs`, `default` and `via` keymaps.
2022-01-26 20:23:18 +01:00
"LAYOUT_60_ansi_arrow": {
"layout": [
Move remaining `LAYOUT_all`s to data driven (#20463)
2023-04-26 23:45:43 +02:00
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [1, 0], "x": 1, "y": 0},
{"matrix": [0, 1], "x": 2, "y": 0},
{"matrix": [1, 1], "x": 3, "y": 0},
{"matrix": [0, 2], "x": 4, "y": 0},
{"matrix": [1, 2], "x": 5, "y": 0},
{"matrix": [0, 3], "x": 6, "y": 0},
{"matrix": [1, 3], "x": 7, "y": 0},
{"matrix": [0, 4], "x": 8, "y": 0},
{"matrix": [1, 4], "x": 9, "y": 0},
{"matrix": [0, 5], "x": 10, "y": 0},
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 6], "x": 12, "y": 0},
{"matrix": [2, 6], "x": 13, "y": 0, "w": 2},
{"matrix": [2, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [3, 0], "x": 1.5, "y": 1},
{"matrix": [2, 1], "x": 2.5, "y": 1},
{"matrix": [3, 1], "x": 3.5, "y": 1},
{"matrix": [2, 2], "x": 4.5, "y": 1},
{"matrix": [3, 2], "x": 5.5, "y": 1},
{"matrix": [2, 3], "x": 6.5, "y": 1},
{"matrix": [3, 3], "x": 7.5, "y": 1},
{"matrix": [2, 4], "x": 8.5, "y": 1},
{"matrix": [3, 4], "x": 9.5, "y": 1},
{"matrix": [2, 5], "x": 10.5, "y": 1},
{"matrix": [3, 5], "x": 11.5, "y": 1},
{"matrix": [3, 6], "x": 12.5, "y": 1},
{"matrix": [4, 6], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [4, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [5, 0], "x": 1.75, "y": 2},
{"matrix": [4, 1], "x": 2.75, "y": 2},
{"matrix": [5, 1], "x": 3.75, "y": 2},
{"matrix": [4, 2], "x": 4.75, "y": 2},
{"matrix": [5, 2], "x": 5.75, "y": 2},
{"matrix": [4, 3], "x": 6.75, "y": 2},
{"matrix": [5, 3], "x": 7.75, "y": 2},
{"matrix": [4, 4], "x": 8.75, "y": 2},
{"matrix": [5, 4], "x": 9.75, "y": 2},
{"matrix": [4, 5], "x": 10.75, "y": 2},
{"matrix": [5, 5], "x": 11.75, "y": 2},
{"matrix": [4, 7], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [6, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [7, 0], "x": 2.25, "y": 3},
{"matrix": [6, 1], "x": 3.25, "y": 3},
{"matrix": [7, 1], "x": 4.25, "y": 3},
{"matrix": [6, 2], "x": 5.25, "y": 3},
{"matrix": [7, 2], "x": 6.25, "y": 3},
{"matrix": [6, 3], "x": 7.25, "y": 3},
{"matrix": [7, 3], "x": 8.25, "y": 3},
{"matrix": [6, 4], "x": 9.25, "y": 3},
{"matrix": [7, 4], "x": 10.25, "y": 3},
{"matrix": [7, 5], "x": 11.25, "y": 3, "w": 1.75},
{"matrix": [6, 6], "x": 13, "y": 3},
{"matrix": [7, 7], "x": 14, "y": 3},
{"matrix": [8, 0], "x": 0, "y": 4, "w": 1.25},
{"matrix": [9, 0], "x": 1.25, "y": 4, "w": 1.25},
{"matrix": [8, 1], "x": 2.5, "y": 4, "w": 1.25},
{"matrix": [9, 2], "x": 3.75, "y": 4, "w": 6.25},
{"matrix": [9, 4], "x": 10, "y": 4},
{"matrix": [8, 5], "x": 11, "y": 4},
{"matrix": [8, 6], "x": 12, "y": 4},
{"matrix": [9, 5], "x": 13, "y": 4},
{"matrix": [9, 7], "x": 14, "y": 4}
Krush60 Solder Refactor (#16029) * solder.h: add matrix diagram * solder.h: remove unnecessary comments * rework LAYOUT_60_iso to LAYOUT_60_isoenter_split_bs True ISO layouts are not supported on this keyboard because the PCB lacks support for split Left Shift. Renames the `iso` to `isoenter` to specify this. - denotes use of Split Backspace - move Backslash keycode to home row * info.json: remove trailing whitespace * info.json: clean up Sort the layout trees into the same order as `solder.h`, and remove the `LAYOUT_60_all` tree (doesn't exist in source). * solder.h: align positional arguments Helps me proof-read the layouts at a glance. No logic change. * fix syntax errors in keymaps * remove ISO layouts As previously noted, ISO layouts are not supported due to the PCB's lack of support for split Left Shift. * rename LAYOUT_60_ansi_tsangan_split_bs to LAYOUT_60_tsangan_hhkb Also renames `60_tsangan_splt_bs` keymap to `60_tsangan_hhkb`. * rename LAYOUT_60_ansi_tsangan to LAYOUT_60_ansi_tsangan_split_rshift Also renames `60_tsangan` keymap to `60_ansi_tsangan_split_rshift`. * rename LAYOUT_60_ansi_arrow_split_bs_7u_spc to LAYOUT_60_ansi_arrow_tsangan_split_bs Also rename `60_ansi_arrow_splt_bs_7u` to `60_ansi_arrow_tsangan_split_bs`. * rename LAYOUT_60_ansi_arrow_7u_spc to LAYOUT_60_ansi_arrow_tsangan Also renames `60_ansi_arrow_7u` keymap to `60_ansi_arrow_tsangan`. * rename keymaps based on layout macro used Making this easier to track in my head while I work on it. * info.json: fix syntax errors * rename LAYOUT_60_ansi_split_bs_7u_spc to LAYOUT_60_ansi_tsangan_split_bs - renames `60_ansi_split_bs_7u_spc` keymap to `60_ansi_tsangan_split_bs` - removes `layout_aliases` entry from `info.json` (creates incompatible data conflict) * rename LAYOUT_60_ansi_7u_spc to LAYOUT_60_ansi_tsangan - renames `60_ansi_7u_spc` keymap to `60_ansi_tsangan` * info.json: remove LAYOUT_60_ansi_tsangan layout_aliases entry Causes an incompatible data conflict. * add second layer to 60_ansi keymap * update via keymap Now matches the behaviour of the default keymap. * fix syntax errors in keymaps, take 2 * add RGB and Navigation keycodes Adds RGB and Navigation keycodes to the `60_isoenter_split_bs`, `default` and `via` keymaps.
2022-01-26 20:23:18 +01:00
]
},
"LAYOUT_60_ansi_arrow_tsangan_split_bs": {
"layout": [
Move remaining `LAYOUT_all`s to data driven (#20463)
2023-04-26 23:45:43 +02:00
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [1, 0], "x": 1, "y": 0},
{"matrix": [0, 1], "x": 2, "y": 0},
{"matrix": [1, 1], "x": 3, "y": 0},
{"matrix": [0, 2], "x": 4, "y": 0},
{"matrix": [1, 2], "x": 5, "y": 0},
{"matrix": [0, 3], "x": 6, "y": 0},
{"matrix": [1, 3], "x": 7, "y": 0},
{"matrix": [0, 4], "x": 8, "y": 0},
{"matrix": [1, 4], "x": 9, "y": 0},
{"matrix": [0, 5], "x": 10, "y": 0},
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 6], "x": 12, "y": 0},
{"matrix": [2, 6], "x": 13, "y": 0},
{"matrix": [1, 7], "x": 14, "y": 0},
{"matrix": [2, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [3, 0], "x": 1.5, "y": 1},
{"matrix": [2, 1], "x": 2.5, "y": 1},
{"matrix": [3, 1], "x": 3.5, "y": 1},
{"matrix": [2, 2], "x": 4.5, "y": 1},
{"matrix": [3, 2], "x": 5.5, "y": 1},
{"matrix": [2, 3], "x": 6.5, "y": 1},
{"matrix": [3, 3], "x": 7.5, "y": 1},
{"matrix": [2, 4], "x": 8.5, "y": 1},
{"matrix": [3, 4], "x": 9.5, "y": 1},
{"matrix": [2, 5], "x": 10.5, "y": 1},
{"matrix": [3, 5], "x": 11.5, "y": 1},
{"matrix": [3, 6], "x": 12.5, "y": 1},
{"matrix": [4, 6], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [4, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [5, 0], "x": 1.75, "y": 2},
{"matrix": [4, 1], "x": 2.75, "y": 2},
{"matrix": [5, 1], "x": 3.75, "y": 2},
{"matrix": [4, 2], "x": 4.75, "y": 2},
{"matrix": [5, 2], "x": 5.75, "y": 2},
{"matrix": [4, 3], "x": 6.75, "y": 2},
{"matrix": [5, 3], "x": 7.75, "y": 2},
{"matrix": [4, 4], "x": 8.75, "y": 2},
{"matrix": [5, 4], "x": 9.75, "y": 2},
{"matrix": [4, 5], "x": 10.75, "y": 2},
{"matrix": [5, 5], "x": 11.75, "y": 2},
{"matrix": [4, 7], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [6, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [7, 0], "x": 2.25, "y": 3},
{"matrix": [6, 1], "x": 3.25, "y": 3},
{"matrix": [7, 1], "x": 4.25, "y": 3},
{"matrix": [6, 2], "x": 5.25, "y": 3},
{"matrix": [7, 2], "x": 6.25, "y": 3},
{"matrix": [6, 3], "x": 7.25, "y": 3},
{"matrix": [7, 3], "x": 8.25, "y": 3},
{"matrix": [6, 4], "x": 9.25, "y": 3},
{"matrix": [7, 4], "x": 10.25, "y": 3},
{"matrix": [7, 5], "x": 11.25, "y": 3, "w": 1.75},
{"matrix": [6, 6], "x": 13, "y": 3},
{"matrix": [7, 7], "x": 14, "y": 3},
{"matrix": [8, 0], "x": 0, "y": 4, "w": 1.5},
{"matrix": [9, 0], "x": 1.5, "y": 4},
{"matrix": [8, 1], "x": 2.5, "y": 4, "w": 1.5},
{"matrix": [9, 2], "x": 4, "y": 4, "w": 7},
{"matrix": [8, 5], "x": 11, "y": 4},
{"matrix": [8, 6], "x": 12, "y": 4},
{"matrix": [9, 5], "x": 13, "y": 4},
{"matrix": [9, 7], "x": 14, "y": 4}
Krush60 Solder Refactor (#16029) * solder.h: add matrix diagram * solder.h: remove unnecessary comments * rework LAYOUT_60_iso to LAYOUT_60_isoenter_split_bs True ISO layouts are not supported on this keyboard because the PCB lacks support for split Left Shift. Renames the `iso` to `isoenter` to specify this. - denotes use of Split Backspace - move Backslash keycode to home row * info.json: remove trailing whitespace * info.json: clean up Sort the layout trees into the same order as `solder.h`, and remove the `LAYOUT_60_all` tree (doesn't exist in source). * solder.h: align positional arguments Helps me proof-read the layouts at a glance. No logic change. * fix syntax errors in keymaps * remove ISO layouts As previously noted, ISO layouts are not supported due to the PCB's lack of support for split Left Shift. * rename LAYOUT_60_ansi_tsangan_split_bs to LAYOUT_60_tsangan_hhkb Also renames `60_tsangan_splt_bs` keymap to `60_tsangan_hhkb`. * rename LAYOUT_60_ansi_tsangan to LAYOUT_60_ansi_tsangan_split_rshift Also renames `60_tsangan` keymap to `60_ansi_tsangan_split_rshift`. * rename LAYOUT_60_ansi_arrow_split_bs_7u_spc to LAYOUT_60_ansi_arrow_tsangan_split_bs Also rename `60_ansi_arrow_splt_bs_7u` to `60_ansi_arrow_tsangan_split_bs`. * rename LAYOUT_60_ansi_arrow_7u_spc to LAYOUT_60_ansi_arrow_tsangan Also renames `60_ansi_arrow_7u` keymap to `60_ansi_arrow_tsangan`. * rename keymaps based on layout macro used Making this easier to track in my head while I work on it. * info.json: fix syntax errors * rename LAYOUT_60_ansi_split_bs_7u_spc to LAYOUT_60_ansi_tsangan_split_bs - renames `60_ansi_split_bs_7u_spc` keymap to `60_ansi_tsangan_split_bs` - removes `layout_aliases` entry from `info.json` (creates incompatible data conflict) * rename LAYOUT_60_ansi_7u_spc to LAYOUT_60_ansi_tsangan - renames `60_ansi_7u_spc` keymap to `60_ansi_tsangan` * info.json: remove LAYOUT_60_ansi_tsangan layout_aliases entry Causes an incompatible data conflict. * add second layer to 60_ansi keymap * update via keymap Now matches the behaviour of the default keymap. * fix syntax errors in keymaps, take 2 * add RGB and Navigation keycodes Adds RGB and Navigation keycodes to the `60_isoenter_split_bs`, `default` and `via` keymaps.
2022-01-26 20:23:18 +01:00
]
},
"LAYOUT_60_ansi_tsangan_split_rshift": {
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
"layout": [
Move remaining `LAYOUT_all`s to data driven (#20463)
2023-04-26 23:45:43 +02:00
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [1, 0], "x": 1, "y": 0},
{"matrix": [0, 1], "x": 2, "y": 0},
{"matrix": [1, 1], "x": 3, "y": 0},
{"matrix": [0, 2], "x": 4, "y": 0},
{"matrix": [1, 2], "x": 5, "y": 0},
{"matrix": [0, 3], "x": 6, "y": 0},
{"matrix": [1, 3], "x": 7, "y": 0},
{"matrix": [0, 4], "x": 8, "y": 0},
{"matrix": [1, 4], "x": 9, "y": 0},
{"matrix": [0, 5], "x": 10, "y": 0},
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 6], "x": 12, "y": 0},
{"matrix": [2, 6], "x": 13, "y": 0, "w": 2},
{"matrix": [2, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [3, 0], "x": 1.5, "y": 1},
{"matrix": [2, 1], "x": 2.5, "y": 1},
{"matrix": [3, 1], "x": 3.5, "y": 1},
{"matrix": [2, 2], "x": 4.5, "y": 1},
{"matrix": [3, 2], "x": 5.5, "y": 1},
{"matrix": [2, 3], "x": 6.5, "y": 1},
{"matrix": [3, 3], "x": 7.5, "y": 1},
{"matrix": [2, 4], "x": 8.5, "y": 1},
{"matrix": [3, 4], "x": 9.5, "y": 1},
{"matrix": [2, 5], "x": 10.5, "y": 1},
{"matrix": [3, 5], "x": 11.5, "y": 1},
{"matrix": [3, 6], "x": 12.5, "y": 1},
{"matrix": [4, 6], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [4, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [5, 0], "x": 1.75, "y": 2},
{"matrix": [4, 1], "x": 2.75, "y": 2},
{"matrix": [5, 1], "x": 3.75, "y": 2},
{"matrix": [4, 2], "x": 4.75, "y": 2},
{"matrix": [5, 2], "x": 5.75, "y": 2},
{"matrix": [4, 3], "x": 6.75, "y": 2},
{"matrix": [5, 3], "x": 7.75, "y": 2},
{"matrix": [4, 4], "x": 8.75, "y": 2},
{"matrix": [5, 4], "x": 9.75, "y": 2},
{"matrix": [4, 5], "x": 10.75, "y": 2},
{"matrix": [5, 5], "x": 11.75, "y": 2},
{"matrix": [4, 7], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [6, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [7, 0], "x": 2.25, "y": 3},
{"matrix": [6, 1], "x": 3.25, "y": 3},
{"matrix": [7, 1], "x": 4.25, "y": 3},
{"matrix": [6, 2], "x": 5.25, "y": 3},
{"matrix": [7, 2], "x": 6.25, "y": 3},
{"matrix": [6, 3], "x": 7.25, "y": 3},
{"matrix": [7, 3], "x": 8.25, "y": 3},
{"matrix": [6, 4], "x": 9.25, "y": 3},
{"matrix": [7, 4], "x": 10.25, "y": 3},
{"matrix": [6, 5], "x": 11.25, "y": 3},
{"matrix": [6, 6], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [7, 7], "x": 14, "y": 3},
{"matrix": [8, 0], "x": 0, "y": 4, "w": 1.5},
{"matrix": [9, 0], "x": 1.5, "y": 4},
{"matrix": [8, 1], "x": 2.5, "y": 4, "w": 1.5},
{"matrix": [9, 2], "x": 4, "y": 4, "w": 7},
{"matrix": [8, 5], "x": 11, "y": 4, "w": 1.5},
{"matrix": [9, 5], "x": 12.5, "y": 4},
{"matrix": [9, 7], "x": 13.5, "y": 4, "w": 1.5}
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
]
},
Krush60 Solder Refactor (#16029) * solder.h: add matrix diagram * solder.h: remove unnecessary comments * rework LAYOUT_60_iso to LAYOUT_60_isoenter_split_bs True ISO layouts are not supported on this keyboard because the PCB lacks support for split Left Shift. Renames the `iso` to `isoenter` to specify this. - denotes use of Split Backspace - move Backslash keycode to home row * info.json: remove trailing whitespace * info.json: clean up Sort the layout trees into the same order as `solder.h`, and remove the `LAYOUT_60_all` tree (doesn't exist in source). * solder.h: align positional arguments Helps me proof-read the layouts at a glance. No logic change. * fix syntax errors in keymaps * remove ISO layouts As previously noted, ISO layouts are not supported due to the PCB's lack of support for split Left Shift. * rename LAYOUT_60_ansi_tsangan_split_bs to LAYOUT_60_tsangan_hhkb Also renames `60_tsangan_splt_bs` keymap to `60_tsangan_hhkb`. * rename LAYOUT_60_ansi_tsangan to LAYOUT_60_ansi_tsangan_split_rshift Also renames `60_tsangan` keymap to `60_ansi_tsangan_split_rshift`. * rename LAYOUT_60_ansi_arrow_split_bs_7u_spc to LAYOUT_60_ansi_arrow_tsangan_split_bs Also rename `60_ansi_arrow_splt_bs_7u` to `60_ansi_arrow_tsangan_split_bs`. * rename LAYOUT_60_ansi_arrow_7u_spc to LAYOUT_60_ansi_arrow_tsangan Also renames `60_ansi_arrow_7u` keymap to `60_ansi_arrow_tsangan`. * rename keymaps based on layout macro used Making this easier to track in my head while I work on it. * info.json: fix syntax errors * rename LAYOUT_60_ansi_split_bs_7u_spc to LAYOUT_60_ansi_tsangan_split_bs - renames `60_ansi_split_bs_7u_spc` keymap to `60_ansi_tsangan_split_bs` - removes `layout_aliases` entry from `info.json` (creates incompatible data conflict) * rename LAYOUT_60_ansi_7u_spc to LAYOUT_60_ansi_tsangan - renames `60_ansi_7u_spc` keymap to `60_ansi_tsangan` * info.json: remove LAYOUT_60_ansi_tsangan layout_aliases entry Causes an incompatible data conflict. * add second layer to 60_ansi keymap * update via keymap Now matches the behaviour of the default keymap. * fix syntax errors in keymaps, take 2 * add RGB and Navigation keycodes Adds RGB and Navigation keycodes to the `60_isoenter_split_bs`, `default` and `via` keymaps.
2022-01-26 20:23:18 +01:00
"LAYOUT_60_tsangan_hhkb": {
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
"layout": [
Move remaining `LAYOUT_all`s to data driven (#20463)
2023-04-26 23:45:43 +02:00
{"matrix": [0, 0], "x": 0, "y": 0},
{"matrix": [1, 0], "x": 1, "y": 0},
{"matrix": [0, 1], "x": 2, "y": 0},
{"matrix": [1, 1], "x": 3, "y": 0},
{"matrix": [0, 2], "x": 4, "y": 0},
{"matrix": [1, 2], "x": 5, "y": 0},
{"matrix": [0, 3], "x": 6, "y": 0},
{"matrix": [1, 3], "x": 7, "y": 0},
{"matrix": [0, 4], "x": 8, "y": 0},
{"matrix": [1, 4], "x": 9, "y": 0},
{"matrix": [0, 5], "x": 10, "y": 0},
{"matrix": [1, 5], "x": 11, "y": 0},
{"matrix": [0, 6], "x": 12, "y": 0},
{"matrix": [2, 6], "x": 13, "y": 0},
{"matrix": [1, 7], "x": 14, "y": 0},
{"matrix": [2, 0], "x": 0, "y": 1, "w": 1.5},
{"matrix": [3, 0], "x": 1.5, "y": 1},
{"matrix": [2, 1], "x": 2.5, "y": 1},
{"matrix": [3, 1], "x": 3.5, "y": 1},
{"matrix": [2, 2], "x": 4.5, "y": 1},
{"matrix": [3, 2], "x": 5.5, "y": 1},
{"matrix": [2, 3], "x": 6.5, "y": 1},
{"matrix": [3, 3], "x": 7.5, "y": 1},
{"matrix": [2, 4], "x": 8.5, "y": 1},
{"matrix": [3, 4], "x": 9.5, "y": 1},
{"matrix": [2, 5], "x": 10.5, "y": 1},
{"matrix": [3, 5], "x": 11.5, "y": 1},
{"matrix": [3, 6], "x": 12.5, "y": 1},
{"matrix": [4, 6], "x": 13.5, "y": 1, "w": 1.5},
{"matrix": [4, 0], "x": 0, "y": 2, "w": 1.75},
{"matrix": [5, 0], "x": 1.75, "y": 2},
{"matrix": [4, 1], "x": 2.75, "y": 2},
{"matrix": [5, 1], "x": 3.75, "y": 2},
{"matrix": [4, 2], "x": 4.75, "y": 2},
{"matrix": [5, 2], "x": 5.75, "y": 2},
{"matrix": [4, 3], "x": 6.75, "y": 2},
{"matrix": [5, 3], "x": 7.75, "y": 2},
{"matrix": [4, 4], "x": 8.75, "y": 2},
{"matrix": [5, 4], "x": 9.75, "y": 2},
{"matrix": [4, 5], "x": 10.75, "y": 2},
{"matrix": [5, 5], "x": 11.75, "y": 2},
{"matrix": [4, 7], "x": 12.75, "y": 2, "w": 2.25},
{"matrix": [6, 0], "x": 0, "y": 3, "w": 2.25},
{"matrix": [7, 0], "x": 2.25, "y": 3},
{"matrix": [6, 1], "x": 3.25, "y": 3},
{"matrix": [7, 1], "x": 4.25, "y": 3},
{"matrix": [6, 2], "x": 5.25, "y": 3},
{"matrix": [7, 2], "x": 6.25, "y": 3},
{"matrix": [6, 3], "x": 7.25, "y": 3},
{"matrix": [7, 3], "x": 8.25, "y": 3},
{"matrix": [6, 4], "x": 9.25, "y": 3},
{"matrix": [7, 4], "x": 10.25, "y": 3},
{"matrix": [6, 5], "x": 11.25, "y": 3},
{"matrix": [6, 6], "x": 12.25, "y": 3, "w": 1.75},
{"matrix": [7, 7], "x": 14, "y": 3},
{"matrix": [8, 0], "x": 0, "y": 4, "w": 1.5},
{"matrix": [9, 0], "x": 1.5, "y": 4},
{"matrix": [8, 1], "x": 2.5, "y": 4, "w": 1.5},
{"matrix": [9, 2], "x": 4, "y": 4, "w": 7},
{"matrix": [8, 5], "x": 11, "y": 4, "w": 1.5},
{"matrix": [9, 5], "x": 12.5, "y": 4},
{"matrix": [9, 7], "x": 13.5, "y": 4, "w": 1.5}
[Keyboard] Added Krush Solder (60% & 65%) (#15074)
2021-11-11 05:30:27 +01:00
]
}
}
}
Copy permalink