qmk_firmware/keyboards/lfkeyboards/mini1800/revc/readme.md

# Mini1800 RevC

The first public release of the Mini1800.

* Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards)
* Hardware Supported: Mini1800 RevC (Black PCB with AT90USB646)
* Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/)

Make example for this keyboard (after setting up your build environment):

    make lfkeyboards/mini1800/revc:default

Flashing example for this keyboard:

    make lfkeyboards/mini1800/revc:default:flash

## Bootloader

To reset the board into bootloader mode, do one of the following:

* **Physical reset button**: Briefly press the button on the bottom of the PCB (between Q and W keys)
* **Keycode in keymap**: Press the key mapped to `QK_BOOT` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default)

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
LFKeyboards Mini1800: refactor into revisions (#16260) * fork Mini1800 into reva and revc versions * update info.json - apply friendly formatting - update maintainer value * update keymap rules.mk formatting - align inline comments - convert tabs to spaces * align keymap rules.mk files to QMK template * move common keymap rules.mk settings to revision level * info.json: correct key sequence * align revision rules.mk files to QMK template * clean up revision rules.mk files * add readme files for each revision * correct USB Product string * remove post_rules.mk files The internal settings were commented out, so the files actually don't do anything. * edit Bootloader instructions on main readme * move non-assignment rules to post_rules.mk * add inline comments for NKRO_ENABLE per fauxpark 2022-02-08 05:12:59 +01:00			`# Mini1800 RevC`

			`The first public release of the Mini1800.`

			`* Keyboard Maintainer: [LFKeyboards](https://github.com/lfkeyboards)`
			`* Hardware Supported: Mini1800 RevC (Black PCB with AT90USB646)`
			`* Hardware Availability: [LFKeyboards.com](https://www.lfkeyboards.com/)`

			`Make example for this keyboard (after setting up your build environment):`

			`make lfkeyboards/mini1800/revc:default`

			`Flashing example for this keyboard:`

			`make lfkeyboards/mini1800/revc:default:flash`

			`## Bootloader`

			`To reset the board into bootloader mode, do one of the following:`

			`* Physical reset button: Briefly press the button on the bottom of the PCB (between Q and W keys)`
RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 12:34:17 +02:00			* Keycode in keymap: Press the key mapped to `QK_BOOT` if it is available (`Fn`+`Right Shift`, then tap `Enter` by default)
LFKeyboards Mini1800: refactor into revisions (#16260) * fork Mini1800 into reva and revc versions * update info.json - apply friendly formatting - update maintainer value * update keymap rules.mk formatting - align inline comments - convert tabs to spaces * align keymap rules.mk files to QMK template * move common keymap rules.mk settings to revision level * info.json: correct key sequence * align revision rules.mk files to QMK template * clean up revision rules.mk files * add readme files for each revision * correct USB Product string * remove post_rules.mk files The internal settings were commented out, so the files actually don't do anything. * edit Bootloader instructions on main readme * move non-assignment rules to post_rules.mk * add inline comments for NKRO_ENABLE per fauxpark 2022-02-08 05:12:59 +01:00
			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`