forked from forks/qmk_firmware
[Keyboard] Convert ErgoDox EZ to Matrix Lite (#10189)
* Convert ErgoDox EZ to lite matrix * Add initial config from Dactyl config Based on ErinCall's work to generalize the mcp i/o expander matrix code * formatting * Fix number of pins * Remove unused defines
This commit is contained in:
Drashna Jaelre
GitHub
parent
482c9fbbf2
commit
11c308d436
|
|
@ -32,6 +32,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2)
|
||||
#define MATRIX_COLS 6
|
||||
|
||||
#define COL_EXPANDED { true, true, true, true, true, true, true, false, false, false, false, false, false, false }
|
||||
#define MATRIX_ONBOARD_ROW_PINS { 0, 0, 0, 0, 0, 0, 0, B0, B1, B2, B3, D2, D3, C6 }
|
||||
#define MATRIX_ONBOARD_COL_PINS { F0, F1, F4, F5, F6, F7 }
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
#define EXPANDER_COL_REGISTER GPIOB
|
||||
#define EXPANDER_ROW_REGISTER GPIOA
|
||||
#define MATRIX_EXPANDER_COL_PINS { 5, 4, 3, 2, 1, 0 }
|
||||
#define MATRIX_EXPANDER_ROW_PINS { 0, 1, 2, 3, 4, 5, 6 }
|
||||
|
||||
|
||||
#define MOUSEKEY_INTERVAL 20
|
||||
#define MOUSEKEY_DELAY 0
|
||||
#define MOUSEKEY_TIME_TO_MAX 60
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
#include QMK_KEYBOARD_H
|
||||
#include "ergodox_ez.h"
|
||||
|
||||
extern inline void ergodox_board_led_on(void);
|
||||
extern inline void ergodox_right_led_1_on(void);
|
||||
|
|
|
|||
|
|
@ -4,10 +4,6 @@
|
|||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include "i2c_master.h"
|
||||
#include <util/delay.h>
|
||||
|
||||
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
|
||||
#define CPU_16MHz 0x00
|
||||
|
||||
// I2C aliases and register addresses (see "mcp23018.md")
|
||||
#define I2C_ADDR 0b0100000
|
||||
|
|
|
|||
|
|
@ -30,7 +30,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#include "util.h"
|
||||
#include "matrix.h"
|
||||
#include "debounce.h"
|
||||
#include QMK_KEYBOARD_H
|
||||
#include "ergodox_ez.h"
|
||||
|
||||
|
||||
/*
|
||||
* This constant define not debouncing time in msecs, assuming eager_pr.
|
||||
|
|
@ -45,8 +46,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
*/
|
||||
|
||||
/* matrix state(1:on, 0:off) */
|
||||
static matrix_row_t raw_matrix[MATRIX_ROWS]; // raw values
|
||||
static matrix_row_t matrix[MATRIX_ROWS]; // debounced values
|
||||
extern matrix_row_t matrix[MATRIX_ROWS]; // debounced values
|
||||
extern matrix_row_t raw_matrix[MATRIX_ROWS]; // raw values
|
||||
|
||||
static matrix_row_t read_cols(uint8_t row);
|
||||
static void init_cols(void);
|
||||
|
|
@ -54,132 +55,62 @@ static void unselect_rows(void);
|
|||
static void select_row(uint8_t row);
|
||||
|
||||
static uint8_t mcp23018_reset_loop;
|
||||
// static uint16_t mcp23018_reset_loop;
|
||||
|
||||
__attribute__((weak)) void matrix_init_user(void) {}
|
||||
void matrix_init_custom(void) {
|
||||
// initialize row and col
|
||||
|
||||
__attribute__((weak)) void matrix_scan_user(void) {}
|
||||
mcp23018_status = init_mcp23018();
|
||||
|
||||
__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
|
||||
|
||||
__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
|
||||
|
||||
inline uint8_t matrix_rows(void) { return MATRIX_ROWS; }
|
||||
|
||||
inline uint8_t matrix_cols(void) { return MATRIX_COLS; }
|
||||
|
||||
void matrix_init(void) {
|
||||
// initialize row and col
|
||||
|
||||
mcp23018_status = init_mcp23018();
|
||||
|
||||
unselect_rows();
|
||||
init_cols();
|
||||
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
matrix[i] = 0;
|
||||
raw_matrix[i] = 0;
|
||||
}
|
||||
|
||||
debounce_init(MATRIX_ROWS);
|
||||
matrix_init_quantum();
|
||||
}
|
||||
|
||||
void matrix_power_up(void) {
|
||||
mcp23018_status = init_mcp23018();
|
||||
|
||||
unselect_rows();
|
||||
init_cols();
|
||||
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
matrix[i] = 0;
|
||||
}
|
||||
unselect_rows();
|
||||
init_cols();
|
||||
}
|
||||
|
||||
// Reads and stores a row, returning
|
||||
// whether a change occurred.
|
||||
static inline bool store_raw_matrix_row(uint8_t index) {
|
||||
matrix_row_t temp = read_cols(index);
|
||||
if (raw_matrix[index] != temp) {
|
||||
raw_matrix[index] = temp;
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
matrix_row_t temp = read_cols(index);
|
||||
if (raw_matrix[index] != temp) {
|
||||
raw_matrix[index] = temp;
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void) {
|
||||
if (mcp23018_status) { // if there was an error
|
||||
if (++mcp23018_reset_loop == 0) {
|
||||
// if (++mcp23018_reset_loop >= 1300) {
|
||||
// since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
|
||||
// this will be approx bit more frequent than once per second
|
||||
print("trying to reset mcp23018\n");
|
||||
mcp23018_status = init_mcp23018();
|
||||
if (mcp23018_status) {
|
||||
print("left side not responding\n");
|
||||
} else {
|
||||
print("left side attached\n");
|
||||
ergodox_blink_all_leds();
|
||||
bool matrix_scan_custom(matrix_row_t current_matrix[]) {
|
||||
if (mcp23018_status) { // if there was an error
|
||||
if (++mcp23018_reset_loop == 0) {
|
||||
print("trying to reset mcp23018\n");
|
||||
mcp23018_status = init_mcp23018();
|
||||
if (mcp23018_status) {
|
||||
print("left side not responding\n");
|
||||
} else {
|
||||
print("left side attached\n");
|
||||
ergodox_blink_all_leds();
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
rgb_matrix_init(); // re-init driver on reconnect
|
||||
rgb_matrix_init(); // re-init driver on reconnect
|
||||
#endif
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef LEFT_LEDS
|
||||
mcp23018_status = ergodox_left_leds_update();
|
||||
mcp23018_status = ergodox_left_leds_update();
|
||||
#endif // LEFT_LEDS
|
||||
bool changed = false;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
|
||||
// select rows from left and right hands
|
||||
uint8_t left_index = i;
|
||||
uint8_t right_index = i + MATRIX_ROWS_PER_SIDE;
|
||||
select_row(left_index);
|
||||
select_row(right_index);
|
||||
bool changed = false;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
|
||||
// select rows from left and right hands
|
||||
uint8_t left_index = i;
|
||||
uint8_t right_index = i + MATRIX_ROWS_PER_SIDE;
|
||||
select_row(left_index);
|
||||
select_row(right_index);
|
||||
|
||||
// we don't need a 30us delay anymore, because selecting a
|
||||
// left-hand row requires more than 30us for i2c.
|
||||
changed |= store_raw_matrix_row(left_index);
|
||||
changed |= store_raw_matrix_row(right_index);
|
||||
|
||||
changed |= store_raw_matrix_row(left_index);
|
||||
changed |= store_raw_matrix_row(right_index);
|
||||
unselect_rows();
|
||||
}
|
||||
|
||||
unselect_rows();
|
||||
}
|
||||
|
||||
debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
|
||||
matrix_scan_quantum();
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
bool matrix_is_modified(void) // deprecated and evidently not called.
|
||||
{
|
||||
return true;
|
||||
}
|
||||
|
||||
inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); }
|
||||
|
||||
inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; }
|
||||
|
||||
void matrix_print(void) {
|
||||
print("\nr/c 0123456789ABCDEF\n");
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
phex(row);
|
||||
print(": ");
|
||||
pbin_reverse16(matrix_get_row(row));
|
||||
print("\n");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t matrix_key_count(void) {
|
||||
uint8_t count = 0;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
count += bitpop16(matrix[i]);
|
||||
}
|
||||
return count;
|
||||
return changed;
|
||||
}
|
||||
|
||||
/* Column pin configuration
|
||||
|
|
@ -193,42 +124,43 @@ uint8_t matrix_key_count(void) {
|
|||
* pin: B5 B4 B3 B2 B1 B0
|
||||
*/
|
||||
static void init_cols(void) {
|
||||
// init on mcp23018
|
||||
// not needed, already done as part of init_mcp23018()
|
||||
// init on mcp23018
|
||||
// not needed, already done as part of init_mcp23018()
|
||||
|
||||
// init on teensy
|
||||
// Input with pull-up(DDR:0, PORT:1)
|
||||
DDRF &= ~(1 << 7 | 1 << 6 | 1 << 5 | 1 << 4 | 1 << 1 | 1 << 0);
|
||||
PORTF |= (1 << 7 | 1 << 6 | 1 << 5 | 1 << 4 | 1 << 1 | 1 << 0);
|
||||
// init on teensy
|
||||
setPinInputHigh(F0);
|
||||
setPinInputHigh(F1);
|
||||
setPinInputHigh(F4);
|
||||
setPinInputHigh(F5);
|
||||
setPinInputHigh(F6);
|
||||
setPinInputHigh(F7);
|
||||
}
|
||||
|
||||
static matrix_row_t read_cols(uint8_t row) {
|
||||
if (row < 7) {
|
||||
if (mcp23018_status) { // if there was an error
|
||||
return 0;
|
||||
if (row < 7) {
|
||||
if (mcp23018_status) { // if there was an error
|
||||
return 0;
|
||||
} else {
|
||||
uint8_t data = 0;
|
||||
// reading GPIOB (column port) since in mcp23018's sequential mode
|
||||
// it is addressed directly after writing to GPIOA in select_row()
|
||||
mcp23018_status = i2c_start(I2C_ADDR_READ, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_read_nack(ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status < 0) goto out;
|
||||
data = ~((uint8_t)mcp23018_status);
|
||||
mcp23018_status = I2C_STATUS_SUCCESS;
|
||||
out:
|
||||
i2c_stop();
|
||||
return data;
|
||||
}
|
||||
} else {
|
||||
uint8_t data = 0;
|
||||
// reading GPIOB (column port) since in mcp23018's sequential mode
|
||||
// it is addressed directly after writing to GPIOA in select_row()
|
||||
mcp23018_status = i2c_start(I2C_ADDR_READ, ERGODOX_EZ_I2C_TIMEOUT);
|
||||
if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_read_nack(ERGODOX_EZ_I2C_TIMEOUT);
|
||||
if (mcp23018_status < 0) goto out;
|
||||
data = ~((uint8_t)mcp23018_status);
|
||||
mcp23018_status = I2C_STATUS_SUCCESS;
|
||||
out:
|
||||
i2c_stop();
|
||||
return data;
|
||||
}
|
||||
} else {
|
||||
/* read from teensy
|
||||
* bitmask is 0b11110011, but we want those all
|
||||
* in the lower six bits.
|
||||
* we'll return 1s for the top two, but that's harmless.
|
||||
*/
|
||||
/* read from teensy
|
||||
* bitmask is 0b11110011, but we want those all
|
||||
* in the lower six bits.
|
||||
* we'll return 1s for the top two, but that's harmless.
|
||||
*/
|
||||
|
||||
return ~((PINF & 0x03) | ((PINF & 0xF0) >> 2));
|
||||
}
|
||||
return ~((PINF & 0x03) | ((PINF & 0xF0) >> 2));
|
||||
}
|
||||
}
|
||||
|
||||
/* Row pin configuration
|
||||
|
|
@ -242,69 +174,64 @@ static matrix_row_t read_cols(uint8_t row) {
|
|||
* pin: A0 A1 A2 A3 A4 A5 A6
|
||||
*/
|
||||
static void unselect_rows(void) {
|
||||
// no need to unselect on mcp23018, because the select step sets all
|
||||
// the other row bits high, and it's not changing to a different
|
||||
// direction
|
||||
// no need to unselect on mcp23018, because the select step sets all
|
||||
// the other row bits high, and it's not changing to a different
|
||||
// direction
|
||||
|
||||
// unselect on teensy
|
||||
// Hi-Z(DDR:0, PORT:0) to unselect
|
||||
DDRB &= ~(1 << 0 | 1 << 1 | 1 << 2 | 1 << 3);
|
||||
PORTB &= ~(1 << 0 | 1 << 1 | 1 << 2 | 1 << 3);
|
||||
DDRD &= ~(1 << 2 | 1 << 3);
|
||||
PORTD &= ~(1 << 2 | 1 << 3);
|
||||
DDRC &= ~(1 << 6);
|
||||
PORTC &= ~(1 << 6);
|
||||
// unselect on teensy
|
||||
setPinInput(B0);
|
||||
setPinInput(B1);
|
||||
setPinInput(B2);
|
||||
setPinInput(B3);
|
||||
setPinInput(D2);
|
||||
setPinInput(D3);
|
||||
setPinInput(C6);
|
||||
}
|
||||
|
||||
static void select_row(uint8_t row) {
|
||||
if (row < 7) {
|
||||
// select on mcp23018
|
||||
if (mcp23018_status) { // if there was an error
|
||||
// do nothing
|
||||
if (row < 7) {
|
||||
// select on mcp23018
|
||||
if (!mcp23018_status) {
|
||||
// set active row low : 0
|
||||
// set other rows hi-Z : 1
|
||||
mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(0xFF & ~(1 << row), ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
|
||||
out:
|
||||
i2c_stop();
|
||||
}
|
||||
} else {
|
||||
// set active row low : 0
|
||||
// set other rows hi-Z : 1
|
||||
mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);
|
||||
if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT);
|
||||
if (mcp23018_status) goto out;
|
||||
mcp23018_status = i2c_write(0xFF & ~(1 << row), ERGODOX_EZ_I2C_TIMEOUT);
|
||||
if (mcp23018_status) goto out;
|
||||
out:
|
||||
i2c_stop();
|
||||
// select on teensy
|
||||
// Output low(DDR:1, PORT:0) to select
|
||||
switch (row) {
|
||||
case 7:
|
||||
setPinOutput(B0);
|
||||
writePinLow(B0);
|
||||
break;
|
||||
case 8:
|
||||
setPinOutput(B1);
|
||||
writePinLow(B1);
|
||||
break;
|
||||
case 9:
|
||||
setPinOutput(B2);
|
||||
writePinLow(B2);
|
||||
break;
|
||||
case 10:
|
||||
setPinOutput(B3);
|
||||
writePinLow(B3);
|
||||
break;
|
||||
case 11:
|
||||
setPinOutput(D2);
|
||||
writePinLow(D2);
|
||||
break;
|
||||
case 12:
|
||||
setPinOutput(D3);
|
||||
writePinLow(D3);
|
||||
break;
|
||||
case 13:
|
||||
setPinOutput(C6);
|
||||
writePinLow(C6);
|
||||
break;
|
||||
}
|
||||
}
|
||||
} else {
|
||||
// select on teensy
|
||||
// Output low(DDR:1, PORT:0) to select
|
||||
switch (row) {
|
||||
case 7:
|
||||
DDRB |= (1 << 0);
|
||||
PORTB &= ~(1 << 0);
|
||||
break;
|
||||
case 8:
|
||||
DDRB |= (1 << 1);
|
||||
PORTB &= ~(1 << 1);
|
||||
break;
|
||||
case 9:
|
||||
DDRB |= (1 << 2);
|
||||
PORTB &= ~(1 << 2);
|
||||
break;
|
||||
case 10:
|
||||
DDRB |= (1 << 3);
|
||||
PORTB &= ~(1 << 3);
|
||||
break;
|
||||
case 11:
|
||||
DDRD |= (1 << 2);
|
||||
PORTD &= ~(1 << 2);
|
||||
break;
|
||||
case 12:
|
||||
DDRD |= (1 << 3);
|
||||
PORTD &= ~(1 << 3);
|
||||
break;
|
||||
case 13:
|
||||
DDRC |= (1 << 6);
|
||||
PORTC &= ~(1 << 6);
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -19,20 +19,20 @@ BOOTLOADER = halfkay
|
|||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX = yes # Custom matrix file for the ErgoDox EZ
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
UNICODE_ENABLE = yes # Unicode
|
||||
SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX = lite # Custom matrix file for the ErgoDox EZ
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
UNICODE_ENABLE = yes # Unicode
|
||||
SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
|
||||
SLEEP_LED_ENABLE = no
|
||||
API_SYSEX_ENABLE = no
|
||||
RGBLIGHT_ENABLE = yes
|
||||
|
||||
RGB_MATRIX_ENABLE = no # enable later
|
||||
RGB_MATRIX_ENABLE = no # enable later
|
||||
DEBOUNCE_TYPE = eager_pr
|
||||
|
||||
# project specific files
|
||||
|
|
|
|||
Loading…
Reference in a new issue