varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity

should have fixed conflixed

Browse source
This commit is contained in:
climbalima 2016-11-16 19:49:38 -05:00
parent 668c739702
commit 21b6b4e6c4
13 changed files with 10 additions and 268 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

79
keyboards/lets_split/Makefile
View file

@ -1,82 +1,3 @@
<<<<<<< HEAD
ifndef MAKEFILE_INCLUDED ifndef MAKEFILE_INCLUDED
=======
SRC += matrix.c \
i2c.c \
split_util.c \
serial.c
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= no # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
MIDI_ENABLE ?= no # MIDI controls
AUDIO_ENABLE ?= yes # Audio output on port C6
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
USE_I2C ?= yes
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
CUSTOM_MATRIX = yes
SUBPROJECT_DEFAULT = rev2
ifndef QUANTUM_DIR
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
include ../../Makefile include ../../Makefile
endif endif

11
keyboards/lets_split/config.h
View file

@ -61,10 +61,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_ONESHOT //#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO //#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION //#define NO_ACTION_FUNCTION
<<<<<<< HEAD
=======
<<<<<<< HEAD
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
#ifdef SUBPROJECT_rev1 #ifdef SUBPROJECT_rev1
#include "rev1/config.h" #include "rev1/config.h"
#endif #endif
@ -72,9 +69,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "rev2/config.h" #include "rev2/config.h"
#endif #endif
#endif #endif
<<<<<<< HEAD
=======
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df

19
keyboards/lets_split/keymaps/default/keymap.c
View file

@ -29,7 +29,6 @@ enum custom_keycodes {
#define XXXXXXX KC_NO #define XXXXXXX KC_NO
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
<<<<<<< HEAD
/* Qwerty /* Qwerty
* ,-----------------------------------------------------------------------------------. * ,-----------------------------------------------------------------------------------.
@ -83,29 +82,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \
ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
=======
[0] = KEYMAP( \
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, \
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
KC_LCTL, _LOWER, KC_LGUI, KC_LALT, MO(_LOWER), KC_SPC, KC_SPC, MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
), ),
[3] = KEYMAP( \ [3] = KEYMAP( \
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
<<<<<<< HEAD
_______, _______, _______, _______, _______, KC_BSPC, MT(MOD_LSFT, KC_BSPC), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ _______, _______, _______, _______, _______, KC_BSPC, MT(MOD_LSFT, KC_BSPC), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
=======
_______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
), ),
[4] = KEYMAP( \ [4] = KEYMAP( \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \
<<<<<<< HEAD
_______, _______, _______, _______, _______, KC_ENT, MT(MOD_LSFT, KC_ENT), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ _______, _______, _______, _______, _______, KC_ENT, MT(MOD_LSFT, KC_ENT), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
), ),
@ -126,12 +113,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
_______, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______, _______, _______, \ _______, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
) )
=======
_______, _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
}; };
#ifdef AUDIO_ENABLE #ifdef AUDIO_ENABLE

5
keyboards/lets_split/lets_split.c
View file

@ -1,6 +1 @@
#include "lets_split.h" #include "lets_split.h"
<<<<<<< HEAD
=======
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df

26
keyboards/lets_split/rev1/config.h
View file

@ -25,11 +25,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define PRODUCT_ID 0x3060 #define PRODUCT_ID 0x3060
#define DEVICE_VER 0x0001 #define DEVICE_VER 0x0001
#define MANUFACTURER Wootpatoot #define MANUFACTURER Wootpatoot
<<<<<<< HEAD
#define PRODUCT Lets Split #define PRODUCT Lets Split
=======
#define PRODUCT Lets Split v1 #define PRODUCT Lets Split v1
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
#define DESCRIPTION A split keyboard for the cheap makers #define DESCRIPTION A split keyboard for the cheap makers
/* key matrix size */ /* key matrix size */
@ -44,15 +41,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define CATERINA_BOOTLOADER #define CATERINA_BOOTLOADER
// #define USE_I2C // #define USE_I2C
<<<<<<< HEAD
// Use serial if not using I2C // Use serial if not using I2C
#ifndef USE_I2C #ifndef USE_I2C
# define USE_SERIAL # define USE_SERIAL
#endif #endif
=======
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
// #define EE_HANDS // #define EE_HANDS
#define I2C_MASTER_LEFT #define I2C_MASTER_LEFT
@ -80,21 +73,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
) )
/* ws2812 RGB LED */
<<<<<<< HEAD
#define RGB_DI_PIN D4
#define RGBLIGHT_TIMER
#define RGBLED_NUM 8 // Number of LEDs
=======
#define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD
#define ws2812_pin PD1
#define RGBLED_NUM 28 // Number of LEDs
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
/* /*
* Feature disable options * Feature disable options
* These options are also useful to firmware size reduction. * These options are also useful to firmware size reduction.
@ -113,8 +91,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_MACRO //#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION //#define NO_ACTION_FUNCTION
<<<<<<< HEAD
#endif #endif
=======
#endif
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df

6
keyboards/lets_split/rev1/rev1.c
View file

@ -24,15 +24,9 @@ void matrix_init_kb(void) {
}; };
void shutdown_user(void) { void shutdown_user(void) {
<<<<<<< HEAD
#ifdef AUDIO_ENABLE #ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_goodbye, false, 0); PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
_delay_ms(150); _delay_ms(150);
stop_all_notes(); stop_all_notes();
#endif #endif
=======
PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
_delay_ms(150);
stop_all_notes();
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
} }

5
keyboards/lets_split/rev1/rev1.h
View file

@ -1,15 +1,12 @@
#ifndef REV1_H #ifndef REV1_H
#define REV1_H #define REV1_H
<<<<<<< HEAD
#include "../lets_split.h" #include "../lets_split.h"
//void promicro_bootloader_jmp(bool program); //void promicro_bootloader_jmp(bool program);
=======
#include "quantum.h" #include "quantum.h"
void promicro_bootloader_jmp(bool program); //void promicro_bootloader_jmp(bool program);
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
#define KEYMAP( \ #define KEYMAP( \
k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \

16
keyboards/lets_split/rev2/config.h
View file

@ -41,14 +41,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define USE_I2C // #define USE_I2C
<<<<<<< HEAD
// Use serial if not using I2C // Use serial if not using I2C
#ifndef USE_I2C #ifndef USE_I2C
# define USE_SERIAL # define USE_SERIAL
#endif #endif
=======
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
// #define EE_HANDS // #define EE_HANDS
#define I2C_MASTER_LEFT #define I2C_MASTER_LEFT
@ -77,19 +74,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
) )
/* ws2812 RGB LED */ /* ws2812 RGB LED */
<<<<<<< HEAD
#define RGB_DI_PIN D3 #define RGB_DI_PIN D3
#define RGBLIGHT_TIMER #define RGBLIGHT_TIMER
#define RGBLED_NUM 12 // Number of LEDs #define RGBLED_NUM 12 // Number of LEDs
=======
#define ws2812_PORTREG PORTD #define ws2812_PORTREG PORTD
#define ws2812_DDRREG DDRD #define ws2812_DDRREG DDRD
#define ws2812_pin PD1
#define RGBLED_NUM 28 // Number of LEDs
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
/* /*
* Feature disable options * Feature disable options
@ -109,8 +98,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_MACRO //#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION //#define NO_ACTION_FUNCTION
<<<<<<< HEAD
#endif #endif
=======
#endif
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df

6
keyboards/lets_split/rev2/rev2.c
View file

@ -24,15 +24,9 @@ void matrix_init_kb(void) {
}; };
void shutdown_user(void) { void shutdown_user(void) {
<<<<<<< HEAD
#ifdef AUDIO_ENABLE #ifdef AUDIO_ENABLE
PLAY_NOTE_ARRAY(tone_goodbye, false, 0); PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
_delay_ms(150); _delay_ms(150);
stop_all_notes(); stop_all_notes();
#endif #endif
=======
PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
_delay_ms(150);
stop_all_notes();
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
} }

5
keyboards/lets_split/rev2/rev2.h
View file

@ -1,15 +1,12 @@
#ifndef REV2_H #ifndef REV2_H
#define REV2_H #define REV2_H
<<<<<<< HEAD
#include "../lets_split.h" #include "../lets_split.h"
//void promicro_bootloader_jmp(bool program); //void promicro_bootloader_jmp(bool program);
=======
#include "quantum.h" #include "quantum.h"
void promicro_bootloader_jmp(bool program); //void promicro_bootloader_jmp(bool program);
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
#define KEYMAP( \ #define KEYMAP( \
k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \ k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \

78
keyboards/maxipad/Makefile
View file

@ -1,81 +1,3 @@
<<<<<<< HEAD
ifndef MAKEFILE_INCLUDED ifndef MAKEFILE_INCLUDED
include ../../Makefile include ../../Makefile
endif endif
=======
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=512
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE ?= no # USB Nkey Rollover
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE ?= no # MIDI controls
UNICODE_ENABLE ?= no # Unicode
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE ?= no # Audio output on port C6
ifndef QUANTUM_DIR
include ../../Makefile
endif
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df

9
keyboards/maxipad/config.h
View file

@ -24,15 +24,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0xFEED #define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060 #define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001 #define DEVICE_VER 0x0001
<<<<<<< HEAD
#define MANUFACTURER You
#define PRODUCT maxipad
#define DESCRIPTION A custom keyboard
=======
#define MANUFACTURER Wootpatoot #define MANUFACTURER Wootpatoot
#define PRODUCT maxipad #define PRODUCT maxipad
#define DESCRIPTION g8ming keeb #define DESCRIPTION A custom keyboard
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
/* key matrix size */ /* key matrix size */
#define MATRIX_ROWS 5 #define MATRIX_ROWS 5

5
keyboards/maxipad/keymaps/default/keymap.c
View file

@ -10,13 +10,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
), ),
[1] = KEYMAP( [1] = KEYMAP(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, \ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, \
<<<<<<< HEAD
KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, \
=======
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \ KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \
), ),