forked from forks/qmk_firmware
Merge remote-tracking branch 'origin/master' into develop
This commit is contained in:
QMK Bot
commit
24000ef2e1
|
|
@ -24,7 +24,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define MATRIX_COL_PINS \
|
||||
{ A15, B3, B4, B5, B6, B7 }
|
||||
#define MATRIX_ROW_PINS \
|
||||
{ B12, B13, B14, B15, A8, A9 }
|
||||
{ B12, B13, B14, B15, A8, A10 }
|
||||
|
||||
#define UNUSED_PINS \
|
||||
{ C15 }
|
||||
// B2 used for BOOT1, has internal pull down?
|
||||
// A9 has internal pull-down
|
||||
// A11 and A12 are used for USB sense. DO NOT USE.
|
||||
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
|
|
@ -45,12 +51,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define RGBLED_SPLIT \
|
||||
{ 10, 10 }
|
||||
|
||||
#define DEBUG_LED_PIN C13
|
||||
#define DEBUG_LED_PIN C13
|
||||
|
||||
#define AUDIO_PIN A0
|
||||
#define AUDIO_PWM_DRIVER PWMD5
|
||||
#define AUDIO_PWM_CHANNEL 1
|
||||
#define AUDIO_STATE_TIMER GPTD4
|
||||
/* Audio config */
|
||||
#define AUDIO_PIN B1
|
||||
#define AUDIO_PWM_DRIVER PWMD3
|
||||
#define AUDIO_PWM_CHANNEL 4
|
||||
#define AUDIO_PWM_PAL_MODE 2
|
||||
#define AUDIO_STATE_TIMER GPTD4
|
||||
|
||||
/* serial.c configuration for split keyboard */
|
||||
#define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode.
|
||||
|
|
@ -60,10 +68,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
|
||||
#define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
|
||||
#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100
|
||||
#undef SOFT_SERIAL_PIN
|
||||
|
||||
// #define EE_HANDS
|
||||
|
||||
/* i2c config for oleds */
|
||||
#define I2C_DRIVER I2CD1
|
||||
#define I2C1_SCL_BANK GPIOB
|
||||
#define I2C1_SDA_BANK GPIOB
|
||||
|
|
@ -73,11 +79,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define I2C1_SDA_PAL_MODE 4
|
||||
#define I2C1_CLOCK_SPEED 400000
|
||||
|
||||
/* encoder config */
|
||||
#define ENCODERS_PAD_A \
|
||||
{ B1 }
|
||||
{ A13 }
|
||||
#define ENCODERS_PAD_B \
|
||||
{ B2 }
|
||||
{ A14 }
|
||||
|
||||
/* spi config for eeprom and pmw3360 sensor */
|
||||
#define SPI_DRIVER SPID1
|
||||
#define SPI_SCK_PIN A5
|
||||
#define SPI_SCK_PAL_MODE 5
|
||||
|
|
@ -86,6 +94,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define SPI_MISO_PIN A6
|
||||
#define SPI_MISO_PAL_MODE 5
|
||||
|
||||
/* eeprom config */
|
||||
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
|
||||
#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8
|
||||
// #define EXTERNAL_EEPROM_BYTE_COUNT 8196
|
||||
|
|
@ -93,6 +102,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
// #define EXTERNAL_EEPROM_ADDRESS_SIZE 2
|
||||
// #define DEBUG_EEPROM_OUTPUT
|
||||
|
||||
/* pmw3360 config */
|
||||
#define PMW3360_CS_PIN B0
|
||||
#define PMW3360_SPI_MODE 3
|
||||
#define PMW3360_SPI_DIVISOR 4
|
||||
|
|
|
|||
|
|
@ -15,7 +15,6 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
// #define HAL_USE_DAC TRUE
|
||||
#define HAL_USE_PWM TRUE
|
||||
#define HAL_USE_SERIAL TRUE
|
||||
#define HAL_USE_I2C TRUE
|
||||
|
|
|
|||
|
|
@ -24,11 +24,14 @@
|
|||
#undef STM32_PWM_USE_TIM5
|
||||
#define STM32_PWM_USE_TIM5 TRUE
|
||||
|
||||
#undef STM32_GPT_USE_TIM4
|
||||
#define STM32_GPT_USE_TIM4 TRUE
|
||||
#undef STM32_PWM_USE_TIM3
|
||||
#define STM32_PWM_USE_TIM3 TRUE
|
||||
|
||||
#undef STM32_SPI_USE_SPI1
|
||||
#define STM32_SPI_USE_SPI1 TRUE
|
||||
|
||||
#undef STM32_SERIAL_USE_USART2
|
||||
#define STM32_SERIAL_USE_USART2 TRUE
|
||||
|
||||
#undef STM32_GPT_USE_TIM4
|
||||
#define STM32_GPT_USE_TIM4 TRUE
|
||||
|
|
|
|||
|
|
@ -0,0 +1,24 @@
|
|||
# Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball
|
||||
|
||||
* VBUS mod, using PB10
|
||||
* Split Hand Pin, using PC14
|
||||
* Full Duplex Serial/USART using PA3 and PA4 on USART2
|
||||
* PWM Audio using PB1 and TIM3 and GPT on TIM4
|
||||
* PWM RGB using PA1 TIM5
|
||||
* pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin
|
||||
* 8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin
|
||||
* Encoder using PA10 and PA12
|
||||
* SSD1306 OLED display (128x64) using PB8-PB9 on I2C1
|
||||
|
||||
* Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna)
|
||||
* Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make handwired/tractyl_manuform/5x6_right/f411:default
|
||||
|
||||
Flashing example for this keyboard:
|
||||
|
||||
make handwired/tractyl_manuform/5x6_right/f411:default:flash
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
|
@ -142,8 +142,14 @@ const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
|
|||
[_LOWER] = { { RGB_MOD, RGB_RMOD}, { RGB_HUD, RGB_HUI } },
|
||||
[_ADJUST] = { { CK_DOWN, CK_UP }, { _______, _______ } },
|
||||
};
|
||||
// clang-format on
|
||||
#else
|
||||
bool encoder_update_user(uint8_t index, bool clockwise) {
|
||||
# ifdef SWAP_HANDS_ENABLE
|
||||
if (swap_hands) {
|
||||
index ^= 1;
|
||||
}
|
||||
# endif
|
||||
if (index == 0) {
|
||||
tap_code_delay(clockwise ? KC_VOLD : KC_VOLU, 5);
|
||||
} else if (index == 1) {
|
||||
|
|
@ -152,7 +158,6 @@ bool encoder_update_user(uint8_t index, bool clockwise) {
|
|||
return false;
|
||||
}
|
||||
#endif
|
||||
// clang-format on
|
||||
|
||||
#ifdef POINTING_DEVICE_ENABLE
|
||||
static uint16_t mouse_timer = 0;
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@ HAPTIC_ENABLE = no
|
|||
COMMAND_ENABLE = no
|
||||
TAP_DANCE_ENABLE = yes
|
||||
UNICODE_ENABLE = yes
|
||||
OLED_ENABLE = yes
|
||||
OLED_ENABLE = yes
|
||||
WPM_ENABLE = yes
|
||||
ENCODER_ENABLE = yes
|
||||
ENCODER_MAP_ENABLE = yes
|
||||
|
|
|
|||
|
|
@ -1,8 +1,8 @@
|
|||
# Drashna's Dactyl Manuform (5x6) with a right side trackball
|
||||
# Drashna's Tractyl Manuform (5x6) with a right side trackball
|
||||
|
||||
|
||||
|
||||
It's a Dactyl Manuform with an integrated thumb based trackball, using the pmw3360 optical sensor.
|
||||
It's a Tractyl Manuform with an integrated thumb based trackball, using the pmw3360 optical sensor.
|
||||
|
||||
It's powered by 2x Teensy++ 2.0's, using Drashna's [Teensy VBUS Hack](https://docs.qmk.fm/#/feature_split_keyboard?id=hardware-considerations-and-mods) for better detection.
|
||||
|
||||
|
|
@ -12,10 +12,10 @@ It's powered by 2x Teensy++ 2.0's, using Drashna's [Teensy VBUS Hack](https://do
|
|||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make handwired/dactyl_manuform/5x6_right_trackball:default
|
||||
make handwired/tractyl_manuform/5x6_right:default
|
||||
|
||||
Flashing example for this keyboard:
|
||||
|
||||
make handwired/dactyl_manuform/5x6_right_trackball:default:flash
|
||||
make handwired/tractyl_manuform/5x6_right:default:flash
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
|
|
|||
|
|
@ -19,6 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#pragma once
|
||||
|
||||
// mouse config
|
||||
#ifdef MOUSEKEY_ENABLE
|
||||
# ifndef MOUSEKEY_MOVE_DELTA
|
||||
# ifndef MK_KINETIC_SPEED
|
||||
# define MOUSEKEY_MOVE_DELTA 5
|
||||
|
|
@ -59,7 +60,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
# define MOUSEKEY_ACCELERATED_SPEED 3000
|
||||
# endif
|
||||
|
||||
|
||||
// mouse scroll config
|
||||
# ifndef MOUSEKEY_WHEEL_DELAY
|
||||
# define MOUSEKEY_WHEEL_DELAY 15
|
||||
|
|
@ -89,7 +89,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
# ifndef MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS
|
||||
# define MOUSEKEY_WHEEL_DECELERATED_MOVEMENTS 8
|
||||
# endif
|
||||
|
||||
#endif
|
||||
|
||||
#ifndef DEBOUNCE
|
||||
# define DEBOUNCE 5
|
||||
|
|
|
|||
|
|
@ -20,43 +20,40 @@
|
|||
#include "drivers/sensors/pmw3360.h"
|
||||
|
||||
kb_config_data_t kb_config;
|
||||
kb_pointer_data_t kb_pointer;
|
||||
kb_mouse_report_t sync_mouse_report;
|
||||
|
||||
void kb_pointer_sync_handler(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer) {
|
||||
if (target2initiator_buffer_size == sizeof(sync_mouse_report)) {
|
||||
memcpy(target2initiator_buffer, &sync_mouse_report, sizeof(sync_mouse_report));
|
||||
}
|
||||
sync_mouse_report.x = 0;
|
||||
sync_mouse_report.y = 0;
|
||||
}
|
||||
|
||||
void kb_config_sync_handler(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer) {
|
||||
if (initiator2target_buffer_size == sizeof(kb_config)) {
|
||||
memcpy(&kb_config, initiator2target_buffer, sizeof(kb_config));
|
||||
}
|
||||
}
|
||||
void kb_pointer_sync_handler(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer) {
|
||||
if (target2initiator_buffer_size == sizeof(kb_pointer)) {
|
||||
memcpy(target2initiator_buffer, &kb_pointer, sizeof(kb_pointer));
|
||||
|
||||
static uint16_t cpi = 0;
|
||||
// Check if the state values are different
|
||||
if (cpi != kb_config.device_cpi) {
|
||||
cpi = kb_config.device_cpi;
|
||||
}
|
||||
}
|
||||
|
||||
void keyboard_pre_init_sync(void) {
|
||||
memset(&kb_config, 0, sizeof(kb_config));
|
||||
memset(&kb_pointer, 0, sizeof(kb_pointer));
|
||||
memset(&sync_mouse_report, 0, sizeof(sync_mouse_report));
|
||||
}
|
||||
|
||||
void keyboard_post_init_kb(void) {
|
||||
void keyboard_post_init_sync(void) {
|
||||
// Register keyboard state sync split transaction
|
||||
transaction_register_rpc(RPC_ID_KB_CONFIG_SYNC, kb_config_sync_handler);
|
||||
transaction_register_rpc(RPC_ID_POINTER_STATE_SYNC, kb_pointer_sync_handler);
|
||||
|
||||
keyboard_post_init_user();
|
||||
}
|
||||
|
||||
void kb_config_update(void) {
|
||||
if (is_keyboard_master()) {
|
||||
static uint16_t cpi = 0;
|
||||
if (cpi != kb_config.device_cpi) {
|
||||
cpi = kb_config.device_cpi;
|
||||
pmw_set_cpi(cpi);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void kb_config_sync(void) {
|
||||
void housekeeping_task_sync(void) {
|
||||
if (is_keyboard_master()) {
|
||||
// Keep track of the last state, so that we can tell if we need to propagate to slave
|
||||
static kb_config_data_t last_kb_config;
|
||||
|
|
@ -82,35 +79,6 @@ void kb_config_sync(void) {
|
|||
}
|
||||
}
|
||||
|
||||
void kb_pointer_sync(void) {
|
||||
if (is_keyboard_master() && is_keyboard_left()) {
|
||||
// Keep track of the last state, so that we can tell if we need to propagate to slave
|
||||
static uint32_t last_sync = 0;
|
||||
|
||||
// Perform the sync if requested
|
||||
if (timer_elapsed32(last_sync) >= 5) {
|
||||
if (transaction_rpc_recv(RPC_ID_POINTER_STATE_SYNC, sizeof(kb_pointer), &kb_pointer)) {
|
||||
last_sync = timer_read32();
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void housekeeping_task_kb(void) {
|
||||
// Update kb_config so we can send to slave
|
||||
kb_config_update();
|
||||
// Data sync from master to slave
|
||||
kb_config_sync();
|
||||
kb_pointer_sync();
|
||||
}
|
||||
|
||||
void kb_pointer_sync_send(int8_t x, int8_t y) {
|
||||
kb_pointer.mouse_x = x;
|
||||
kb_pointer.mouse_y = y;
|
||||
}
|
||||
|
||||
kb_pointer_data_t kb_pointer_sync_get(void) { return (kb_pointer_data_t){.mouse_x = kb_pointer.mouse_x, .mouse_y = kb_pointer.mouse_y}; }
|
||||
|
||||
void trackball_set_cpi(uint16_t cpi) {
|
||||
kb_config.device_cpi = cpi;
|
||||
if (!is_keyboard_left()) {
|
||||
|
|
|
|||
|
|
@ -34,23 +34,21 @@ keyboard_config_t keyboard_config;
|
|||
uint16_t dpi_array[] = TRACKBALL_DPI_OPTIONS;
|
||||
#define DPI_OPTION_SIZE (sizeof(dpi_array) / sizeof(uint16_t))
|
||||
|
||||
bool BurstState = false; // init burst state for Trackball module
|
||||
uint16_t MotionStart = 0; // Timer for accel, 0 is resting state
|
||||
bool BurstState = false; // init burst state for Trackball module
|
||||
uint16_t MotionStart = 0; // Timer for accel, 0 is resting state
|
||||
|
||||
__attribute__((weak)) void process_mouse_user(report_mouse_t* mouse_report, int8_t x, int8_t y) {
|
||||
mouse_report->x = x;
|
||||
mouse_report->y = y;
|
||||
}
|
||||
|
||||
__attribute__((weak)) kb_pointer_data_t process_mouse(void) {
|
||||
kb_pointer_data_t temp_data = {.mouse_x = 0, .mouse_y = 0};
|
||||
|
||||
__attribute__((weak)) void process_mouse(void) {
|
||||
report_pmw_t data = pmw_read_burst();
|
||||
// Reset timer if stopped moving
|
||||
if (!data.isMotion) {
|
||||
if (MotionStart != 0) MotionStart = 0;
|
||||
return temp_data;
|
||||
}
|
||||
// Reset timer if stopped moving
|
||||
if (!data.isMotion) {
|
||||
if (MotionStart != 0) MotionStart = 0;
|
||||
return;
|
||||
}
|
||||
|
||||
if (data.isOnSurface) {
|
||||
// Set timer if new motion
|
||||
|
|
@ -59,8 +57,12 @@ __attribute__((weak)) kb_pointer_data_t process_mouse(void) {
|
|||
MotionStart = timer_read();
|
||||
}
|
||||
|
||||
if (debug_mouse) { dprintf("Delt] d: %d t: %u\n", abs(data.dx) + abs(data.dy), MotionStart); }
|
||||
if (debug_mouse) { dprintf("Pre ] X: %d, Y: %d\n", data.dx, data.dy); }
|
||||
if (debug_mouse) {
|
||||
dprintf("Delt] d: %d t: %u\n", abs(data.dx) + abs(data.dy), MotionStart);
|
||||
}
|
||||
if (debug_mouse) {
|
||||
dprintf("Pre ] X: %d, Y: %d\n", data.dx, data.dy);
|
||||
}
|
||||
#if defined(PROFILE_LINEAR)
|
||||
float scale = float(timer_elaspsed(MotionStart)) / 1000.0;
|
||||
data.dx *= scale;
|
||||
|
|
@ -77,14 +79,15 @@ __attribute__((weak)) kb_pointer_data_t process_mouse(void) {
|
|||
if (debug_mouse) dprintf("Cons] X: %d, Y: %d\n", data.dx, data.dy);
|
||||
// dprintf("Elapsed:%u, X: %f Y: %\n", i, pgm_read_byte(firmware_data+i));
|
||||
|
||||
temp_data.mouse_x = -data.dx;
|
||||
temp_data.mouse_y = data.dy;
|
||||
sync_mouse_report.x = -data.dx;
|
||||
sync_mouse_report.y = data.dy;
|
||||
}
|
||||
return temp_data;
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
|
||||
if (!process_record_user(keycode, record)) { return false; }
|
||||
if (!process_record_user(keycode, record)) {
|
||||
return false;
|
||||
}
|
||||
|
||||
#ifdef POINTING_DEVICE_ENABLE
|
||||
if (keycode == DPI_CONFIG && record->event.pressed) {
|
||||
|
|
@ -119,29 +122,28 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
|
|||
return true;
|
||||
}
|
||||
__attribute__((weak)) void keyboard_pre_init_sync(void) {}
|
||||
|
||||
// Hardware Setup
|
||||
void keyboard_pre_init_kb(void) {
|
||||
void keyboard_pre_init_kb(void) {
|
||||
// debug_enable = true;
|
||||
// debug_matrix = true;
|
||||
// debug_mouse = true;
|
||||
// debug_encoder = true;
|
||||
|
||||
/* Ground all output pins connected to ground. This provides additional
|
||||
* pathways to ground. If you're messing with this, know this: driving ANY
|
||||
* of these pins high will cause a short. On the MCU. Ka-blooey.
|
||||
*/
|
||||
|
||||
// This is the debug LED.
|
||||
#if defined(DEBUG_LED_PIN)
|
||||
setPinOutput(DEBUG_LED_PIN);
|
||||
writePin(DEBUG_LED_PIN, debug_enable);
|
||||
writePin(DEBUG_LED_PIN, !debug_enable);
|
||||
#endif
|
||||
|
||||
keyboard_pre_init_sync();
|
||||
keyboard_pre_init_user();
|
||||
}
|
||||
|
||||
__attribute__((weak)) void keyboard_post_init_sync(void) {}
|
||||
void keyboard_post_init_kb(void) {
|
||||
keyboard_post_init_sync();
|
||||
keyboard_post_init_user();
|
||||
}
|
||||
|
||||
#ifdef POINTING_DEVICE_ENABLE
|
||||
void pointing_device_init(void) {
|
||||
if (!is_keyboard_left()) {
|
||||
|
|
@ -153,18 +155,18 @@ void pointing_device_init(void) {
|
|||
|
||||
void pointing_device_task(void) {
|
||||
report_mouse_t mouse_report = pointing_device_get_report();
|
||||
kb_pointer_data_t data = {.mouse_x = mouse_report.x, .mouse_y = mouse_report.y};
|
||||
|
||||
if (is_keyboard_left()) {
|
||||
if (is_keyboard_master()) {
|
||||
data = kb_pointer_sync_get();
|
||||
process_mouse_user(&mouse_report, data.mouse_x, data.mouse_y);
|
||||
transaction_rpc_recv(RPC_ID_POINTER_STATE_SYNC, sizeof(sync_mouse_report), &sync_mouse_report);
|
||||
process_mouse_user(&mouse_report, sync_mouse_report.x, sync_mouse_report.y);
|
||||
}
|
||||
} else {
|
||||
data = process_mouse();
|
||||
if (!is_keyboard_master()) {
|
||||
kb_pointer_sync_send(data.mouse_x, data.mouse_y);
|
||||
} else {
|
||||
process_mouse_user(&mouse_report, data.mouse_x, data.mouse_y);
|
||||
process_mouse();
|
||||
if (is_keyboard_master()) {
|
||||
process_mouse_user(&mouse_report, sync_mouse_report.x, sync_mouse_report.y);
|
||||
sync_mouse_report.x = 0;
|
||||
sync_mouse_report.y = 0;
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -183,11 +185,13 @@ void eeconfig_init_kb(void) {
|
|||
}
|
||||
|
||||
__attribute__((weak)) void matrix_init_sub_kb(void) {}
|
||||
void matrix_init_kb(void) {
|
||||
void matrix_init_kb(void) {
|
||||
// is safe to just read DPI setting since matrix init
|
||||
// comes before pointing device init.
|
||||
keyboard_config.raw = eeconfig_read_kb();
|
||||
if (keyboard_config.dpi_config > DPI_OPTION_SIZE) { eeconfig_init_kb(); }
|
||||
if (keyboard_config.dpi_config > DPI_OPTION_SIZE) {
|
||||
eeconfig_init_kb();
|
||||
}
|
||||
matrix_init_sub_kb();
|
||||
matrix_init_user();
|
||||
}
|
||||
|
|
@ -198,6 +202,12 @@ void matrix_scan_kb(void) {
|
|||
matrix_scan_user();
|
||||
}
|
||||
|
||||
__attribute__((weak)) void housekeeping_task_sync(void) {}
|
||||
void housekeeping_task_kb(void) {
|
||||
housekeeping_task_sync();
|
||||
// no need for user function, is called already
|
||||
}
|
||||
|
||||
#ifdef POINTING_DEVICE_ENABLE
|
||||
void matrix_power_up(void) { pointing_device_task(); }
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -40,18 +40,22 @@ enum ploopy_keycodes {
|
|||
};
|
||||
|
||||
typedef struct {
|
||||
uint16_t device_cpi;
|
||||
uint16_t device_cpi;
|
||||
} kb_config_data_t;
|
||||
|
||||
__attribute__((aligned(16))) typedef struct {
|
||||
int8_t mouse_x;
|
||||
int8_t mouse_y;
|
||||
} kb_pointer_data_t;
|
||||
int8_t x;
|
||||
int8_t y;
|
||||
} kb_mouse_report_t;
|
||||
|
||||
kb_pointer_data_t process_mouse(void);
|
||||
void process_mouse_user(report_mouse_t* mouse_report, int8_t x, int8_t y);
|
||||
void kb_pointer_sync_send(int8_t x, int8_t y);
|
||||
kb_pointer_data_t kb_pointer_sync_get(void);
|
||||
void trackball_set_cpi(uint16_t cpi);
|
||||
void matrix_init_sub_kb(void);
|
||||
void matrix_scan_sub_kb(void);
|
||||
extern kb_mouse_report_t sync_mouse_report;
|
||||
|
||||
void process_mouse(void);
|
||||
void process_mouse_user(report_mouse_t* mouse_report, int8_t x, int8_t y);
|
||||
void trackball_set_cpi(uint16_t cpi);
|
||||
void matrix_init_sub_kb(void);
|
||||
void matrix_scan_sub_kb(void);
|
||||
|
||||
void keyboard_pre_init_sync(void);
|
||||
void keyboard_post_init_sync(void);
|
||||
void housekeeping_task_sync(void);
|
||||
|
|
|
|||
Loading…
Reference in a new issue