forked from forks/qmk_firmware
Convert not_so_minidox to SPLIT_KEYBOARD (#15306)
This commit is contained in:
parent
3716e02ff3
commit
3d06860f3c
|
@ -40,6 +40,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
|
||||||
#define USE_SERIAL
|
#define USE_SERIAL
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||||
|
*/
|
||||||
|
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
|
||||||
|
|
||||||
//#define EE_HANDS
|
//#define EE_HANDS
|
||||||
|
|
||||||
#define MASTER_LEFT
|
#define MASTER_LEFT
|
||||||
|
|
|
@ -1,162 +0,0 @@
|
||||||
#include <util/twi.h>
|
|
||||||
#include <avr/io.h>
|
|
||||||
#include <stdlib.h>
|
|
||||||
#include <avr/interrupt.h>
|
|
||||||
#include <util/twi.h>
|
|
||||||
#include <stdbool.h>
|
|
||||||
#include "i2c.h"
|
|
||||||
|
|
||||||
#ifdef USE_I2C
|
|
||||||
|
|
||||||
// Limits the amount of we wait for any one i2c transaction.
|
|
||||||
// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
|
|
||||||
// 9 bits, a single transaction will take around 90μs to complete.
|
|
||||||
//
|
|
||||||
// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
|
|
||||||
// poll loop takes at least 8 clock cycles to execute
|
|
||||||
#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
|
|
||||||
|
|
||||||
#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
|
|
||||||
|
|
||||||
volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
|
|
||||||
|
|
||||||
static volatile uint8_t slave_buffer_pos;
|
|
||||||
static volatile bool slave_has_register_set = false;
|
|
||||||
|
|
||||||
// Wait for an i2c operation to finish
|
|
||||||
inline static
|
|
||||||
void i2c_delay(void) {
|
|
||||||
uint16_t lim = 0;
|
|
||||||
while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
|
|
||||||
lim++;
|
|
||||||
|
|
||||||
// easier way, but will wait slightly longer
|
|
||||||
// _delay_us(100);
|
|
||||||
}
|
|
||||||
|
|
||||||
// Setup twi to run at 100kHz
|
|
||||||
void i2c_master_init(void) {
|
|
||||||
// no prescaler
|
|
||||||
TWSR = 0;
|
|
||||||
// Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
|
|
||||||
// Check datasheets for more info.
|
|
||||||
TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Start a transaction with the given i2c slave address. The direction of the
|
|
||||||
// transfer is set with I2C_READ and I2C_WRITE.
|
|
||||||
// returns: 0 => success
|
|
||||||
// 1 => error
|
|
||||||
uint8_t i2c_master_start(uint8_t address) {
|
|
||||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
|
|
||||||
|
|
||||||
i2c_delay();
|
|
||||||
|
|
||||||
// check that we started successfully
|
|
||||||
if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
|
|
||||||
return 1;
|
|
||||||
|
|
||||||
TWDR = address;
|
|
||||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
|
||||||
|
|
||||||
i2c_delay();
|
|
||||||
|
|
||||||
if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
|
|
||||||
return 1; // slave did not acknowledge
|
|
||||||
else
|
|
||||||
return 0; // success
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
// Finish the i2c transaction.
|
|
||||||
void i2c_master_stop(void) {
|
|
||||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
|
|
||||||
|
|
||||||
uint16_t lim = 0;
|
|
||||||
while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
|
|
||||||
lim++;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Write one byte to the i2c slave.
|
|
||||||
// returns 0 => slave ACK
|
|
||||||
// 1 => slave NACK
|
|
||||||
uint8_t i2c_master_write(uint8_t data) {
|
|
||||||
TWDR = data;
|
|
||||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
|
||||||
|
|
||||||
i2c_delay();
|
|
||||||
|
|
||||||
// check if the slave acknowledged us
|
|
||||||
return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
|
|
||||||
// if ack=0 the acknowledge bit is not set.
|
|
||||||
// returns: byte read from i2c device
|
|
||||||
uint8_t i2c_master_read(int ack) {
|
|
||||||
TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
|
|
||||||
|
|
||||||
i2c_delay();
|
|
||||||
return TWDR;
|
|
||||||
}
|
|
||||||
|
|
||||||
void i2c_reset_state(void) {
|
|
||||||
TWCR = 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
void i2c_slave_init(uint8_t address) {
|
|
||||||
TWAR = address << 0; // slave i2c address
|
|
||||||
// TWEN - twi enable
|
|
||||||
// TWEA - enable address acknowledgement
|
|
||||||
// TWINT - twi interrupt flag
|
|
||||||
// TWIE - enable the twi interrupt
|
|
||||||
TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
|
|
||||||
}
|
|
||||||
|
|
||||||
ISR(TWI_vect);
|
|
||||||
|
|
||||||
ISR(TWI_vect) {
|
|
||||||
uint8_t ack = 1;
|
|
||||||
switch(TW_STATUS) {
|
|
||||||
case TW_SR_SLA_ACK:
|
|
||||||
// this device has been addressed as a slave receiver
|
|
||||||
slave_has_register_set = false;
|
|
||||||
break;
|
|
||||||
|
|
||||||
case TW_SR_DATA_ACK:
|
|
||||||
// this device has received data as a slave receiver
|
|
||||||
// The first byte that we receive in this transaction sets the location
|
|
||||||
// of the read/write location of the slaves memory that it exposes over
|
|
||||||
// i2c. After that, bytes will be written at slave_buffer_pos, incrementing
|
|
||||||
// slave_buffer_pos after each write.
|
|
||||||
if(!slave_has_register_set) {
|
|
||||||
slave_buffer_pos = TWDR;
|
|
||||||
// don't acknowledge the master if this memory loctaion is out of bounds
|
|
||||||
if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
|
|
||||||
ack = 0;
|
|
||||||
slave_buffer_pos = 0;
|
|
||||||
}
|
|
||||||
slave_has_register_set = true;
|
|
||||||
} else {
|
|
||||||
i2c_slave_buffer[slave_buffer_pos] = TWDR;
|
|
||||||
BUFFER_POS_INC();
|
|
||||||
}
|
|
||||||
break;
|
|
||||||
|
|
||||||
case TW_ST_SLA_ACK:
|
|
||||||
case TW_ST_DATA_ACK:
|
|
||||||
// master has addressed this device as a slave transmitter and is
|
|
||||||
// requesting data.
|
|
||||||
TWDR = i2c_slave_buffer[slave_buffer_pos];
|
|
||||||
BUFFER_POS_INC();
|
|
||||||
break;
|
|
||||||
|
|
||||||
case TW_BUS_ERROR: // something went wrong, reset twi state
|
|
||||||
TWCR = 0;
|
|
||||||
default:
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
// Reset everything, so we are ready for the next TWI interrupt
|
|
||||||
TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
|
|
||||||
}
|
|
||||||
#endif
|
|
|
@ -1,46 +0,0 @@
|
||||||
#pragma once
|
|
||||||
|
|
||||||
#include <stdint.h>
|
|
||||||
|
|
||||||
#ifndef F_CPU
|
|
||||||
#define F_CPU 16000000UL
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define I2C_READ 1
|
|
||||||
#define I2C_WRITE 0
|
|
||||||
|
|
||||||
#define I2C_ACK 1
|
|
||||||
#define I2C_NACK 0
|
|
||||||
|
|
||||||
#define SLAVE_BUFFER_SIZE 0x10
|
|
||||||
|
|
||||||
// i2c SCL clock frequency
|
|
||||||
#define SCL_CLOCK 400000L
|
|
||||||
|
|
||||||
extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
|
|
||||||
|
|
||||||
void i2c_master_init(void);
|
|
||||||
uint8_t i2c_master_start(uint8_t address);
|
|
||||||
void i2c_master_stop(void);
|
|
||||||
uint8_t i2c_master_write(uint8_t data);
|
|
||||||
uint8_t i2c_master_read(int);
|
|
||||||
void i2c_reset_state(void);
|
|
||||||
void i2c_slave_init(uint8_t address);
|
|
||||||
|
|
||||||
|
|
||||||
static inline unsigned char i2c_start_read(unsigned char addr) {
|
|
||||||
return i2c_master_start((addr << 1) | I2C_READ);
|
|
||||||
}
|
|
||||||
|
|
||||||
static inline unsigned char i2c_start_write(unsigned char addr) {
|
|
||||||
return i2c_master_start((addr << 1) | I2C_WRITE);
|
|
||||||
}
|
|
||||||
|
|
||||||
// from SSD1306 scrips
|
|
||||||
extern unsigned char i2c_rep_start(unsigned char addr);
|
|
||||||
extern void i2c_start_wait(unsigned char addr);
|
|
||||||
extern unsigned char i2c_readAck(void);
|
|
||||||
extern unsigned char i2c_readNak(void);
|
|
||||||
extern unsigned char i2c_read(unsigned char ack);
|
|
||||||
|
|
||||||
#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
|
|
|
@ -8,17 +8,10 @@
|
||||||
#define _QWERTY 0
|
#define _QWERTY 0
|
||||||
#define _LOWER 1
|
#define _LOWER 1
|
||||||
#define _RAISE 2
|
#define _RAISE 2
|
||||||
#define _ADJUST 16
|
#define _ADJUST 3
|
||||||
|
|
||||||
enum custom_keycodes {
|
#define KC_LOWR MO(_LOWER)
|
||||||
QWERTY = SAFE_RANGE,
|
#define KC_RASE MO(_RAISE)
|
||||||
LOWER,
|
|
||||||
RAISE,
|
|
||||||
ADJUST,
|
|
||||||
};
|
|
||||||
|
|
||||||
#define KC_LOWR LOWER
|
|
||||||
#define KC_RASE RAISE
|
|
||||||
#define KC_RST RESET
|
#define KC_RST RESET
|
||||||
#define KC_CAD LCTL(LALT(KC_DEL))
|
#define KC_CAD LCTL(LALT(KC_DEL))
|
||||||
|
|
||||||
|
@ -72,45 +65,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
)
|
)
|
||||||
};
|
};
|
||||||
|
|
||||||
|
layer_state_t layer_state_set_user(layer_state_t state) {
|
||||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
return update_tri_layer_state(state, _RAISE, _LOWER, _ADJUST);
|
||||||
switch (keycode) {
|
|
||||||
case QWERTY:
|
|
||||||
if (record->event.pressed) {
|
|
||||||
set_single_persistent_default_layer(_QWERTY);
|
|
||||||
}
|
|
||||||
return false;
|
|
||||||
break;
|
|
||||||
case LOWER:
|
|
||||||
if (record->event.pressed) {
|
|
||||||
layer_on(_LOWER);
|
|
||||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
|
||||||
} else {
|
|
||||||
layer_off(_LOWER);
|
|
||||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
|
||||||
}
|
|
||||||
return false;
|
|
||||||
break;
|
|
||||||
case RAISE:
|
|
||||||
if (record->event.pressed) {
|
|
||||||
layer_on(_RAISE);
|
|
||||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
|
||||||
} else {
|
|
||||||
layer_off(_RAISE);
|
|
||||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
|
||||||
}
|
|
||||||
return false;
|
|
||||||
break;
|
|
||||||
case ADJUST:
|
|
||||||
if (record->event.pressed) {
|
|
||||||
layer_on(_ADJUST);
|
|
||||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
|
||||||
} else {
|
|
||||||
layer_off(_ADJUST);
|
|
||||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
|
||||||
}
|
|
||||||
return false;
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
return true;
|
|
||||||
}
|
}
|
||||||
|
|
|
@ -1,302 +0,0 @@
|
||||||
/*
|
|
||||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
|
||||||
|
|
||||||
This program is free software: you can redistribute it and/or modify
|
|
||||||
it under the terms of the GNU General Public License as published by
|
|
||||||
the Free Software Foundation, either version 2 of the License, or
|
|
||||||
(at your option) any later version.
|
|
||||||
|
|
||||||
This program is distributed in the hope that it will be useful,
|
|
||||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
GNU General Public License for more details.
|
|
||||||
|
|
||||||
You should have received a copy of the GNU General Public License
|
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/*
|
|
||||||
* scan matrix
|
|
||||||
*/
|
|
||||||
#include <stdint.h>
|
|
||||||
#include <stdbool.h>
|
|
||||||
#include <avr/io.h>
|
|
||||||
#include <avr/wdt.h>
|
|
||||||
#include <avr/interrupt.h>
|
|
||||||
#include <util/delay.h>
|
|
||||||
#include "print.h"
|
|
||||||
#include "debug.h"
|
|
||||||
#include "util.h"
|
|
||||||
#include "matrix.h"
|
|
||||||
#include "split_util.h"
|
|
||||||
#include "config.h"
|
|
||||||
#include "quantum.h"
|
|
||||||
|
|
||||||
#ifdef USE_I2C
|
|
||||||
# include "i2c.h"
|
|
||||||
#else // USE_SERIAL
|
|
||||||
# include "serial.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#ifndef DEBOUNCE
|
|
||||||
# define DEBOUNCE 5
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define ERROR_DISCONNECT_COUNT 5
|
|
||||||
|
|
||||||
static uint8_t debouncing = DEBOUNCE;
|
|
||||||
static const int ROWS_PER_HAND = MATRIX_ROWS/2;
|
|
||||||
static uint8_t error_count = 0;
|
|
||||||
|
|
||||||
static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
|
|
||||||
static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
|
|
||||||
|
|
||||||
/* matrix state(1:on, 0:off) */
|
|
||||||
static matrix_row_t matrix[MATRIX_ROWS];
|
|
||||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
|
|
||||||
|
|
||||||
static matrix_row_t read_cols(void);
|
|
||||||
static void init_cols(void);
|
|
||||||
static void unselect_rows(void);
|
|
||||||
static void select_row(uint8_t row);
|
|
||||||
|
|
||||||
|
|
||||||
__attribute__ ((weak))
|
|
||||||
void matrix_init_kb(void) {
|
|
||||||
matrix_init_user();
|
|
||||||
}
|
|
||||||
|
|
||||||
__attribute__ ((weak))
|
|
||||||
void matrix_scan_kb(void) {
|
|
||||||
matrix_scan_user();
|
|
||||||
}
|
|
||||||
|
|
||||||
__attribute__ ((weak))
|
|
||||||
void matrix_init_user(void) {
|
|
||||||
}
|
|
||||||
|
|
||||||
__attribute__ ((weak))
|
|
||||||
void matrix_scan_user(void) {
|
|
||||||
}
|
|
||||||
|
|
||||||
inline
|
|
||||||
uint8_t matrix_rows(void)
|
|
||||||
{
|
|
||||||
return MATRIX_ROWS;
|
|
||||||
}
|
|
||||||
|
|
||||||
inline
|
|
||||||
uint8_t matrix_cols(void)
|
|
||||||
{
|
|
||||||
return MATRIX_COLS;
|
|
||||||
}
|
|
||||||
|
|
||||||
void matrix_init(void)
|
|
||||||
{
|
|
||||||
debug_enable = true;
|
|
||||||
debug_matrix = true;
|
|
||||||
debug_mouse = true;
|
|
||||||
// initialize row and col
|
|
||||||
unselect_rows();
|
|
||||||
init_cols();
|
|
||||||
|
|
||||||
setPinOutput(B0);
|
|
||||||
setPinOutput(D5);
|
|
||||||
|
|
||||||
// initialize matrix state: all keys off
|
|
||||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
|
|
||||||
matrix[i] = 0;
|
|
||||||
matrix_debouncing[i] = 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
matrix_init_quantum();
|
|
||||||
}
|
|
||||||
|
|
||||||
uint8_t _matrix_scan(void)
|
|
||||||
{
|
|
||||||
// Right hand is stored after the left in the matirx so, we need to offset it
|
|
||||||
int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
|
|
||||||
|
|
||||||
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
|
|
||||||
select_row(i);
|
|
||||||
_delay_us(30); // without this wait read unstable value.
|
|
||||||
matrix_row_t cols = read_cols();
|
|
||||||
if (matrix_debouncing[i+offset] != cols) {
|
|
||||||
matrix_debouncing[i+offset] = cols;
|
|
||||||
debouncing = DEBOUNCE;
|
|
||||||
}
|
|
||||||
unselect_rows();
|
|
||||||
}
|
|
||||||
|
|
||||||
if (debouncing) {
|
|
||||||
if (--debouncing) {
|
|
||||||
_delay_ms(1);
|
|
||||||
} else {
|
|
||||||
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
|
|
||||||
matrix[i+offset] = matrix_debouncing[i+offset];
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
#ifdef USE_I2C
|
|
||||||
|
|
||||||
// Get rows from other half over i2c
|
|
||||||
int i2c_transaction(void) {
|
|
||||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
|
|
||||||
|
|
||||||
int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
|
|
||||||
if (err) goto i2c_error;
|
|
||||||
|
|
||||||
// start of matrix stored at 0x00
|
|
||||||
err = i2c_master_write(0x00);
|
|
||||||
if (err) goto i2c_error;
|
|
||||||
|
|
||||||
// Start read
|
|
||||||
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
|
|
||||||
if (err) goto i2c_error;
|
|
||||||
|
|
||||||
if (!err) {
|
|
||||||
int i;
|
|
||||||
for (i = 0; i < ROWS_PER_HAND-1; ++i) {
|
|
||||||
matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
|
|
||||||
}
|
|
||||||
matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
|
|
||||||
i2c_master_stop();
|
|
||||||
} else {
|
|
||||||
i2c_error: // the cable is disconnceted, or something else went wrong
|
|
||||||
i2c_reset_state();
|
|
||||||
return err;
|
|
||||||
}
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
#else // USE_SERIAL
|
|
||||||
|
|
||||||
int serial_transaction(void) {
|
|
||||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
|
|
||||||
|
|
||||||
if (serial_update_buffers()) {
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
|
||||||
matrix[slaveOffset+i] = serial_slave_buffer[i];
|
|
||||||
}
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
uint8_t matrix_scan(void)
|
|
||||||
{
|
|
||||||
int ret = _matrix_scan();
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#ifdef USE_I2C
|
|
||||||
if( i2c_transaction() ) {
|
|
||||||
#else // USE_SERIAL
|
|
||||||
if( serial_transaction() ) {
|
|
||||||
#endif
|
|
||||||
// turn on the indicator led when halves are disconnected
|
|
||||||
writePinLow(D5);
|
|
||||||
|
|
||||||
error_count++;
|
|
||||||
|
|
||||||
if (error_count > ERROR_DISCONNECT_COUNT) {
|
|
||||||
// reset other half if disconnected
|
|
||||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
|
|
||||||
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
|
||||||
matrix[slaveOffset+i] = 0;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
} else {
|
|
||||||
// turn off the indicator led on no error
|
|
||||||
writePinHigh(D5);
|
|
||||||
error_count = 0;
|
|
||||||
}
|
|
||||||
matrix_scan_quantum();
|
|
||||||
return ret;
|
|
||||||
}
|
|
||||||
|
|
||||||
void matrix_slave_scan(void) {
|
|
||||||
_matrix_scan();
|
|
||||||
|
|
||||||
int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2);
|
|
||||||
|
|
||||||
#ifdef USE_I2C
|
|
||||||
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
|
||||||
/* i2c_slave_buffer[i] = matrix[offset+i]; */
|
|
||||||
i2c_slave_buffer[i] = matrix[offset+i];
|
|
||||||
}
|
|
||||||
#else // USE_SERIAL
|
|
||||||
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
|
||||||
serial_slave_buffer[i] = matrix[offset+i];
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
|
|
||||||
inline
|
|
||||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
|
||||||
{
|
|
||||||
return (matrix[row] & ((matrix_row_t)1<<col));
|
|
||||||
}
|
|
||||||
|
|
||||||
inline
|
|
||||||
matrix_row_t matrix_get_row(uint8_t row)
|
|
||||||
{
|
|
||||||
return matrix[row];
|
|
||||||
}
|
|
||||||
|
|
||||||
void matrix_print(void)
|
|
||||||
{
|
|
||||||
print("\nr/c 0123456789ABCDEF\n");
|
|
||||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
|
||||||
print_hex8(row); print(": ");
|
|
||||||
print_bin_reverse16(matrix_get_row(row));
|
|
||||||
print("\n");
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
uint8_t matrix_key_count(void)
|
|
||||||
{
|
|
||||||
uint8_t count = 0;
|
|
||||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
|
||||||
count += bitpop16(matrix[i]);
|
|
||||||
}
|
|
||||||
return count;
|
|
||||||
}
|
|
||||||
|
|
||||||
static void init_cols(void)
|
|
||||||
{
|
|
||||||
for(int x = 0; x < MATRIX_COLS; x++) {
|
|
||||||
_SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF);
|
|
||||||
_SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static matrix_row_t read_cols(void)
|
|
||||||
{
|
|
||||||
matrix_row_t result = 0;
|
|
||||||
for(int x = 0; x < MATRIX_COLS; x++) {
|
|
||||||
result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
|
|
||||||
}
|
|
||||||
return result;
|
|
||||||
}
|
|
||||||
|
|
||||||
static void unselect_rows(void)
|
|
||||||
{
|
|
||||||
for(int x = 0; x < ROWS_PER_HAND; x++) {
|
|
||||||
_SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF);
|
|
||||||
_SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static void select_row(uint8_t row)
|
|
||||||
{
|
|
||||||
_SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF);
|
|
||||||
_SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
|
|
||||||
}
|
|
|
@ -5,24 +5,19 @@ MCU = atmega32u4
|
||||||
BOOTLOADER = caterina
|
BOOTLOADER = caterina
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change yes to no to disable
|
||||||
# the appropriate keymap folder that will get included automatically
|
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
|
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = no # Audio control and System control
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
|
||||||
AUDIO_ENABLE = no # Audio output
|
|
||||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
|
|
||||||
USE_I2C = no
|
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
|
AUDIO_ENABLE = no # Audio output
|
||||||
|
|
||||||
CUSTOM_MATRIX = yes
|
SPLIT_KEYBOARD = yes
|
||||||
SRC += matrix.c \
|
|
||||||
i2c.c \
|
|
||||||
split_util.c \
|
|
||||||
serial.c
|
|
||||||
|
|
|
@ -1,228 +0,0 @@
|
||||||
/*
|
|
||||||
* WARNING: be careful changing this code, it is very timing dependent
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef F_CPU
|
|
||||||
#define F_CPU 16000000
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#include <avr/io.h>
|
|
||||||
#include <avr/interrupt.h>
|
|
||||||
#include <util/delay.h>
|
|
||||||
#include <stdbool.h>
|
|
||||||
#include "serial.h"
|
|
||||||
|
|
||||||
#ifndef USE_I2C
|
|
||||||
|
|
||||||
// Serial pulse period in microseconds. Its probably a bad idea to lower this
|
|
||||||
// value.
|
|
||||||
#define SERIAL_DELAY 24
|
|
||||||
|
|
||||||
uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
|
|
||||||
uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
|
|
||||||
|
|
||||||
#define SLAVE_DATA_CORRUPT (1<<0)
|
|
||||||
volatile uint8_t status = 0;
|
|
||||||
|
|
||||||
inline static
|
|
||||||
void serial_delay(void) {
|
|
||||||
_delay_us(SERIAL_DELAY);
|
|
||||||
}
|
|
||||||
|
|
||||||
inline static
|
|
||||||
void serial_output(void) {
|
|
||||||
SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
|
|
||||||
}
|
|
||||||
|
|
||||||
// make the serial pin an input with pull-up resistor
|
|
||||||
inline static
|
|
||||||
void serial_input(void) {
|
|
||||||
SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
|
|
||||||
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
|
|
||||||
}
|
|
||||||
|
|
||||||
inline static
|
|
||||||
uint8_t serial_read_pin(void) {
|
|
||||||
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
|
|
||||||
}
|
|
||||||
|
|
||||||
inline static
|
|
||||||
void serial_low(void) {
|
|
||||||
SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
|
|
||||||
}
|
|
||||||
|
|
||||||
inline static
|
|
||||||
void serial_high(void) {
|
|
||||||
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
|
|
||||||
}
|
|
||||||
|
|
||||||
void serial_master_init(void) {
|
|
||||||
serial_output();
|
|
||||||
serial_high();
|
|
||||||
}
|
|
||||||
|
|
||||||
void serial_slave_init(void) {
|
|
||||||
serial_input();
|
|
||||||
|
|
||||||
// Enable INT0
|
|
||||||
EIMSK |= _BV(INT0);
|
|
||||||
// Trigger on falling edge of INT0
|
|
||||||
EICRA &= ~(_BV(ISC00) | _BV(ISC01));
|
|
||||||
}
|
|
||||||
|
|
||||||
// Used by the master to synchronize timing with the slave.
|
|
||||||
static
|
|
||||||
void sync_recv(void) {
|
|
||||||
serial_input();
|
|
||||||
// This shouldn't hang if the slave disconnects because the
|
|
||||||
// serial line will float to high if the slave does disconnect.
|
|
||||||
while (!serial_read_pin());
|
|
||||||
serial_delay();
|
|
||||||
}
|
|
||||||
|
|
||||||
// Used by the slave to send a synchronization signal to the master.
|
|
||||||
static
|
|
||||||
void sync_send(void) {
|
|
||||||
serial_output();
|
|
||||||
|
|
||||||
serial_low();
|
|
||||||
serial_delay();
|
|
||||||
|
|
||||||
serial_high();
|
|
||||||
}
|
|
||||||
|
|
||||||
// Reads a byte from the serial line
|
|
||||||
static
|
|
||||||
uint8_t serial_read_byte(void) {
|
|
||||||
uint8_t byte = 0;
|
|
||||||
serial_input();
|
|
||||||
for ( uint8_t i = 0; i < 8; ++i) {
|
|
||||||
byte = (byte << 1) | serial_read_pin();
|
|
||||||
serial_delay();
|
|
||||||
_delay_us(1);
|
|
||||||
}
|
|
||||||
|
|
||||||
return byte;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Sends a byte with MSB ordering
|
|
||||||
static
|
|
||||||
void serial_write_byte(uint8_t data) {
|
|
||||||
uint8_t b = 8;
|
|
||||||
serial_output();
|
|
||||||
while( b-- ) {
|
|
||||||
if(data & (1 << b)) {
|
|
||||||
serial_high();
|
|
||||||
} else {
|
|
||||||
serial_low();
|
|
||||||
}
|
|
||||||
serial_delay();
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
// interrupt handle to be used by the slave device
|
|
||||||
ISR(SERIAL_PIN_INTERRUPT) {
|
|
||||||
sync_send();
|
|
||||||
|
|
||||||
uint8_t checksum = 0;
|
|
||||||
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
|
|
||||||
serial_write_byte(serial_slave_buffer[i]);
|
|
||||||
sync_send();
|
|
||||||
checksum += serial_slave_buffer[i];
|
|
||||||
}
|
|
||||||
serial_write_byte(checksum);
|
|
||||||
sync_send();
|
|
||||||
|
|
||||||
// wait for the sync to finish sending
|
|
||||||
serial_delay();
|
|
||||||
|
|
||||||
// read the middle of pulses
|
|
||||||
_delay_us(SERIAL_DELAY/2);
|
|
||||||
|
|
||||||
uint8_t checksum_computed = 0;
|
|
||||||
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
|
|
||||||
serial_master_buffer[i] = serial_read_byte();
|
|
||||||
sync_send();
|
|
||||||
checksum_computed += serial_master_buffer[i];
|
|
||||||
}
|
|
||||||
uint8_t checksum_received = serial_read_byte();
|
|
||||||
sync_send();
|
|
||||||
|
|
||||||
serial_input(); // end transaction
|
|
||||||
|
|
||||||
if ( checksum_computed != checksum_received ) {
|
|
||||||
status |= SLAVE_DATA_CORRUPT;
|
|
||||||
} else {
|
|
||||||
status &= ~SLAVE_DATA_CORRUPT;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
inline
|
|
||||||
bool serial_slave_DATA_CORRUPT(void) {
|
|
||||||
return status & SLAVE_DATA_CORRUPT;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Copies the serial_slave_buffer to the master and sends the
|
|
||||||
// serial_master_buffer to the slave.
|
|
||||||
//
|
|
||||||
// Returns:
|
|
||||||
// 0 => no error
|
|
||||||
// 1 => slave did not respond
|
|
||||||
int serial_update_buffers(void) {
|
|
||||||
// this code is very time dependent, so we need to disable interrupts
|
|
||||||
cli();
|
|
||||||
|
|
||||||
// signal to the slave that we want to start a transaction
|
|
||||||
serial_output();
|
|
||||||
serial_low();
|
|
||||||
_delay_us(1);
|
|
||||||
|
|
||||||
// wait for the slaves response
|
|
||||||
serial_input();
|
|
||||||
serial_high();
|
|
||||||
_delay_us(SERIAL_DELAY);
|
|
||||||
|
|
||||||
// check if the slave is present
|
|
||||||
if (serial_read_pin()) {
|
|
||||||
// slave failed to pull the line low, assume not present
|
|
||||||
sei();
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
// if the slave is present syncronize with it
|
|
||||||
sync_recv();
|
|
||||||
|
|
||||||
uint8_t checksum_computed = 0;
|
|
||||||
// receive data from the slave
|
|
||||||
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
|
|
||||||
serial_slave_buffer[i] = serial_read_byte();
|
|
||||||
sync_recv();
|
|
||||||
checksum_computed += serial_slave_buffer[i];
|
|
||||||
}
|
|
||||||
uint8_t checksum_received = serial_read_byte();
|
|
||||||
sync_recv();
|
|
||||||
|
|
||||||
if (checksum_computed != checksum_received) {
|
|
||||||
sei();
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
uint8_t checksum = 0;
|
|
||||||
// send data to the slave
|
|
||||||
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
|
|
||||||
serial_write_byte(serial_master_buffer[i]);
|
|
||||||
sync_recv();
|
|
||||||
checksum += serial_master_buffer[i];
|
|
||||||
}
|
|
||||||
serial_write_byte(checksum);
|
|
||||||
sync_recv();
|
|
||||||
|
|
||||||
// always, release the line when not in use
|
|
||||||
serial_output();
|
|
||||||
serial_high();
|
|
||||||
|
|
||||||
sei();
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
#endif
|
|
|
@ -1,23 +0,0 @@
|
||||||
#pragma once
|
|
||||||
|
|
||||||
#include "config.h"
|
|
||||||
#include <stdbool.h>
|
|
||||||
|
|
||||||
/* TODO: some defines for interrupt setup */
|
|
||||||
#define SERIAL_PIN_DDR DDRD
|
|
||||||
#define SERIAL_PIN_PORT PORTD
|
|
||||||
#define SERIAL_PIN_INPUT PIND
|
|
||||||
#define SERIAL_PIN_MASK _BV(PD0)
|
|
||||||
#define SERIAL_PIN_INTERRUPT INT0_vect
|
|
||||||
|
|
||||||
#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
|
|
||||||
#define SERIAL_MASTER_BUFFER_LENGTH 1
|
|
||||||
|
|
||||||
// Buffers for master - slave communication
|
|
||||||
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
|
|
||||||
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
|
|
||||||
|
|
||||||
void serial_master_init(void);
|
|
||||||
void serial_slave_init(void);
|
|
||||||
int serial_update_buffers(void);
|
|
||||||
bool serial_slave_data_corrupt(void);
|
|
|
@ -1,84 +0,0 @@
|
||||||
#include <avr/io.h>
|
|
||||||
#include <avr/wdt.h>
|
|
||||||
#include <avr/power.h>
|
|
||||||
#include <avr/interrupt.h>
|
|
||||||
#include <util/delay.h>
|
|
||||||
#include <avr/eeprom.h>
|
|
||||||
#include "split_util.h"
|
|
||||||
#include "matrix.h"
|
|
||||||
#include "keyboard.h"
|
|
||||||
#include "config.h"
|
|
||||||
|
|
||||||
#ifdef USE_I2C
|
|
||||||
# include "i2c.h"
|
|
||||||
#else
|
|
||||||
# include "serial.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
volatile bool isLeftHand = true;
|
|
||||||
|
|
||||||
static void setup_handedness(void) {
|
|
||||||
#ifdef EE_HANDS
|
|
||||||
isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
|
|
||||||
#else
|
|
||||||
// I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
|
|
||||||
#if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
|
|
||||||
isLeftHand = !has_usb();
|
|
||||||
#else
|
|
||||||
isLeftHand = has_usb();
|
|
||||||
#endif
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
|
|
||||||
static void keyboard_master_setup(void) {
|
|
||||||
#ifdef USE_I2C
|
|
||||||
i2c_master_init();
|
|
||||||
#ifdef SSD1306OLED
|
|
||||||
matrix_master_OLED_init ();
|
|
||||||
#endif
|
|
||||||
#else
|
|
||||||
serial_master_init();
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
|
|
||||||
static void keyboard_slave_setup(void) {
|
|
||||||
#ifdef USE_I2C
|
|
||||||
i2c_slave_init(SLAVE_I2C_ADDRESS);
|
|
||||||
#else
|
|
||||||
serial_slave_init();
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
|
|
||||||
bool has_usb(void) {
|
|
||||||
USBCON |= (1 << OTGPADE); //enables VBUS pad
|
|
||||||
_delay_us(5);
|
|
||||||
return (USBSTA & (1<<VBUS)); //checks state of VBUS
|
|
||||||
}
|
|
||||||
|
|
||||||
void split_keyboard_setup(void) {
|
|
||||||
setup_handedness();
|
|
||||||
|
|
||||||
if (has_usb()) {
|
|
||||||
keyboard_master_setup();
|
|
||||||
} else {
|
|
||||||
keyboard_slave_setup();
|
|
||||||
}
|
|
||||||
sei();
|
|
||||||
}
|
|
||||||
|
|
||||||
void keyboard_slave_loop(void) {
|
|
||||||
matrix_init();
|
|
||||||
|
|
||||||
while (1) {
|
|
||||||
matrix_slave_scan();
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
// this code runs before the usb and keyboard is initialized
|
|
||||||
void matrix_setup(void) {
|
|
||||||
split_keyboard_setup();
|
|
||||||
|
|
||||||
if (!has_usb()) {
|
|
||||||
keyboard_slave_loop();
|
|
||||||
}
|
|
||||||
}
|
|
|
@ -1,17 +0,0 @@
|
||||||
#pragma once
|
|
||||||
|
|
||||||
#include <stdbool.h>
|
|
||||||
#include "eeconfig.h"
|
|
||||||
|
|
||||||
#define SLAVE_I2C_ADDRESS 0x32
|
|
||||||
|
|
||||||
extern volatile bool isLeftHand;
|
|
||||||
|
|
||||||
// slave version of matix scan, defined in matrix.c
|
|
||||||
void matrix_slave_scan(void);
|
|
||||||
|
|
||||||
void split_keyboard_setup(void);
|
|
||||||
bool has_usb(void);
|
|
||||||
void keyboard_slave_loop(void);
|
|
||||||
|
|
||||||
void matrix_master_OLED_init (void);
|
|
Loading…
Reference in a new issue