1
0
Fork 0
forked from forks/qmk_firmware

Add eeprom defaults for tinyuf2 bootloader (#18042)

This commit is contained in:
Joel Challis 2022-08-25 12:17:41 +01:00 committed by GitHub
parent 1c47bd0ddf
commit 43fd647130
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
21 changed files with 5 additions and 574 deletions

View file

@ -199,6 +199,7 @@ endif
ifeq ($(strip $(BOOTLOADER)), tinyuf2)
OPT_DEFS += -DBOOTLOADER_TINYUF2
BOOTLOADER_TYPE = tinyuf2
FIRMWARE_FORMAT = uf2
endif
ifeq ($(strip $(BOOTLOADER)), rp2040)
OPT_DEFS += -DBOOTLOADER_RP2040

View file

@ -348,7 +348,8 @@ ifneq ($(findstring STM32F401, $(MCU)),)
# or <keyboard_dir>/ld/
ifeq ($(strip $(BOOTLOADER)), tinyuf2)
MCU_LDSCRIPT ?= STM32F401xC_tinyuf2
FIRMWARE_FORMAT ?= uf2
EEPROM_DRIVER ?= wear_leveling
WEAR_LEVELING_DRIVER ?= legacy
else
MCU_LDSCRIPT ?= STM32F401xC
endif
@ -464,7 +465,8 @@ ifneq ($(findstring STM32F411, $(MCU)),)
# or <keyboard_dir>/ld/
ifeq ($(strip $(BOOTLOADER)), tinyuf2)
MCU_LDSCRIPT ?= STM32F411xE_tinyuf2
FIRMWARE_FORMAT ?= uf2
EEPROM_DRIVER ?= wear_leveling
WEAR_LEVELING_DRIVER ?= legacy
else
MCU_LDSCRIPT ?= STM32F411xE
endif

View file

@ -9,14 +9,6 @@
#define MATRIX_ROWS 4
#define MATRIX_COLS 4
#ifdef UF2_BUILD
#define EXTERNAL_EEPROM_BYTE_COUNT 2048
#define EXTERNAL_EEPROM_PAGE_SIZE 128
#define EXTERNAL_EEPROM_ADDRESS_SIZE 1
#define EXTERNAL_EEPROM_WRITE_TIME 0
#define FEE_PAGE_BASE_ADDRESS 0x08008000
#endif
/* Define custom font */
#define OLED_FONT_H "keyboards/mechwild/puckbuddy/glcdfont.c"

View file

@ -1,88 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* STM32F401xE memory setup.
*/
MEMORY
{
flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
flash1 (rx) : org = 0x08004000, len = 16k
flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */
flash3 (rx) : org = 0x0800C000, len = 16k
flash4 (rx) : org = 0x08010000, len = 512k - 64k
flash5 (rx) : org = 0x00000000, len = 0
flash6 (rx) : org = 0x00000000, len = 0
flash7 (rx) : org = 0x00000000, len = 0
ram0 (wx) : org = 0x20000000, len = 96k
ram1 (wx) : org = 0x00000000, len = 0
ram2 (wx) : org = 0x00000000, len = 0
ram3 (wx) : org = 0x00000000, len = 0
ram4 (wx) : org = 0x00000000, len = 0
ram5 (wx) : org = 0x00000000, len = 0
ram6 (wx) : org = 0x00000000, len = 0
ram7 (wx) : org = 0x00000000, len = 0
}
/* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash4);
REGION_ALIAS("VECTORS_FLASH_LMA", flash4);
/* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash4);
REGION_ALIAS("XTORS_FLASH_LMA", flash4);
/* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash4);
REGION_ALIAS("TEXT_FLASH_LMA", flash4);
/* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash4);
REGION_ALIAS("RODATA_FLASH_LMA", flash4);
/* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash4);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash4);
/* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4);
/* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by
the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash4);
/* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0);
/* Generic rules inclusion.*/
INCLUDE rules.ld
/* TinyUF2 bootloader reset support */
_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */

View file

@ -1,7 +0,0 @@
ifeq ($(strip $(BOOTLOADER)), tinyuf2)
ifndef EEPROM_DRIVER
MCU_LDSCRIPT = STM32F401xE
EEPROM_DRIVER = vendor
UF2_BUILD = yes
endif
endif

View file

@ -51,6 +51,3 @@
#define RGBLIGHT_EFFECT_TWINKLE
#endif
// you want to comment this if using stm32-dfu as bootloader
#define FEE_PAGE_BASE_ADDRESS 0x08008000

View file

@ -1,88 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* STM32F401xE memory setup.
*/
MEMORY
{
flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
flash1 (rx) : org = 0x08004000, len = 16k
flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */
flash3 (rx) : org = 0x0800C000, len = 16k
flash4 (rx) : org = 0x08010000, len = 512k - 64k
flash5 (rx) : org = 0x00000000, len = 0
flash6 (rx) : org = 0x00000000, len = 0
flash7 (rx) : org = 0x00000000, len = 0
ram0 (wx) : org = 0x20000000, len = 96k
ram1 (wx) : org = 0x00000000, len = 0
ram2 (wx) : org = 0x00000000, len = 0
ram3 (wx) : org = 0x00000000, len = 0
ram4 (wx) : org = 0x00000000, len = 0
ram5 (wx) : org = 0x00000000, len = 0
ram6 (wx) : org = 0x00000000, len = 0
ram7 (wx) : org = 0x00000000, len = 0
}
/* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash4);
REGION_ALIAS("VECTORS_FLASH_LMA", flash4);
/* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash4);
REGION_ALIAS("XTORS_FLASH_LMA", flash4);
/* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash4);
REGION_ALIAS("TEXT_FLASH_LMA", flash4);
/* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash4);
REGION_ALIAS("RODATA_FLASH_LMA", flash4);
/* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash4);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash4);
/* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4);
/* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by
the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash4);
/* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0);
/* Generic rules inclusion.*/
INCLUDE rules.ld
/* TinyUF2 bootloader reset support */
_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */

View file

@ -4,8 +4,6 @@ BOARD = BLACKPILL_STM32_F401
# Bootloader selection
BOOTLOADER = tinyuf2
MCU_LDSCRIPT = STM32F401xE
EEPROM_DRIVER = vendor
#BOOTLOADER = stm32-dfu
# Build Options

View file

@ -51,6 +51,3 @@
#define RGBLIGHT_EFFECT_ALTERNATING
#define RGBLIGHT_EFFECT_TWINKLE
#endif
// you want to comment this if using stm32-dfu as bootloader
#define FEE_PAGE_BASE_ADDRESS 0x08008000

View file

@ -1,88 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* STM32F401xE memory setup.
*/
MEMORY
{
flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
flash1 (rx) : org = 0x08004000, len = 16k
flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */
flash3 (rx) : org = 0x0800C000, len = 16k
flash4 (rx) : org = 0x08010000, len = 512k - 64k
flash5 (rx) : org = 0x00000000, len = 0
flash6 (rx) : org = 0x00000000, len = 0
flash7 (rx) : org = 0x00000000, len = 0
ram0 (wx) : org = 0x20000000, len = 96k
ram1 (wx) : org = 0x00000000, len = 0
ram2 (wx) : org = 0x00000000, len = 0
ram3 (wx) : org = 0x00000000, len = 0
ram4 (wx) : org = 0x00000000, len = 0
ram5 (wx) : org = 0x00000000, len = 0
ram6 (wx) : org = 0x00000000, len = 0
ram7 (wx) : org = 0x00000000, len = 0
}
/* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash4);
REGION_ALIAS("VECTORS_FLASH_LMA", flash4);
/* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash4);
REGION_ALIAS("XTORS_FLASH_LMA", flash4);
/* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash4);
REGION_ALIAS("TEXT_FLASH_LMA", flash4);
/* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash4);
REGION_ALIAS("RODATA_FLASH_LMA", flash4);
/* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash4);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash4);
/* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4);
/* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by
the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash4);
/* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0);
/* Generic rules inclusion.*/
INCLUDE rules.ld
/* TinyUF2 bootloader reset support */
_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */

View file

@ -5,8 +5,6 @@ BOARD = BLACKPILL_STM32_F401
# Bootloader selection
BOOTLOADER = tinyuf2
#BOOTLOADER = stm32-dfu
MCU_LDSCRIPT = STM32F401xE
EEPROM_DRIVER = vendor
# Build Options
# change yes to no to disable

View file

@ -78,6 +78,3 @@
#define BOOTMAGIC_LITE_ROW_RIGHT 5
#define BOOTMAGIC_LITE_COLUMN_RIGHT 0
#endif
// you want to comment this if using stm32-dfu as bootloader
#define FEE_PAGE_BASE_ADDRESS 0x08008000

View file

@ -1,88 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* STM32F401xE memory setup.
*/
MEMORY
{
flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
flash1 (rx) : org = 0x08004000, len = 16k
flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */
flash3 (rx) : org = 0x0800C000, len = 16k
flash4 (rx) : org = 0x08010000, len = 512k - 64k
flash5 (rx) : org = 0x00000000, len = 0
flash6 (rx) : org = 0x00000000, len = 0
flash7 (rx) : org = 0x00000000, len = 0
ram0 (wx) : org = 0x20000000, len = 96k
ram1 (wx) : org = 0x00000000, len = 0
ram2 (wx) : org = 0x00000000, len = 0
ram3 (wx) : org = 0x00000000, len = 0
ram4 (wx) : org = 0x00000000, len = 0
ram5 (wx) : org = 0x00000000, len = 0
ram6 (wx) : org = 0x00000000, len = 0
ram7 (wx) : org = 0x00000000, len = 0
}
/* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash4);
REGION_ALIAS("VECTORS_FLASH_LMA", flash4);
/* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash4);
REGION_ALIAS("XTORS_FLASH_LMA", flash4);
/* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash4);
REGION_ALIAS("TEXT_FLASH_LMA", flash4);
/* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash4);
REGION_ALIAS("RODATA_FLASH_LMA", flash4);
/* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash4);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash4);
/* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4);
/* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by
the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash4);
/* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0);
/* Generic rules inclusion.*/
INCLUDE rules.ld
/* TinyUF2 bootloader reset support */
_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */

View file

@ -5,8 +5,6 @@ BOARD = BLACKPILL_STM32_F401
# Bootloader selection
BOOTLOADER = tinyuf2
#BOOTLOADER = stm32-dfu
MCU_LDSCRIPT = STM32F401xE
EEPROM_DRIVER = vendor
# Build Options
# change yes to no to disable

View file

@ -55,6 +55,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#endif
// you want to comment this if using stm32-dfu as bootloader
#define FEE_PAGE_BASE_ADDRESS 0x08008000

View file

@ -1,88 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* STM32F401xE memory setup.
*/
MEMORY
{
flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
flash1 (rx) : org = 0x08004000, len = 16k
flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */
flash3 (rx) : org = 0x0800C000, len = 16k
flash4 (rx) : org = 0x08010000, len = 512k - 64k
flash5 (rx) : org = 0x00000000, len = 0
flash6 (rx) : org = 0x00000000, len = 0
flash7 (rx) : org = 0x00000000, len = 0
ram0 (wx) : org = 0x20000000, len = 96k
ram1 (wx) : org = 0x00000000, len = 0
ram2 (wx) : org = 0x00000000, len = 0
ram3 (wx) : org = 0x00000000, len = 0
ram4 (wx) : org = 0x00000000, len = 0
ram5 (wx) : org = 0x00000000, len = 0
ram6 (wx) : org = 0x00000000, len = 0
ram7 (wx) : org = 0x00000000, len = 0
}
/* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash4);
REGION_ALIAS("VECTORS_FLASH_LMA", flash4);
/* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash4);
REGION_ALIAS("XTORS_FLASH_LMA", flash4);
/* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash4);
REGION_ALIAS("TEXT_FLASH_LMA", flash4);
/* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash4);
REGION_ALIAS("RODATA_FLASH_LMA", flash4);
/* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash4);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash4);
/* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4);
/* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by
the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash4);
/* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0);
/* Generic rules inclusion.*/
INCLUDE rules.ld
/* TinyUF2 bootloader reset support */
_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */

View file

@ -5,8 +5,6 @@ BOARD = BLACKPILL_STM32_F401
# Bootloader selection
BOOTLOADER = tinyuf2
#BOOTLOADER = stm32-dfu
MCU_LDSCRIPT = STM32F401xE
EEPROM_DRIVER = vendor
# Build Options
# change yes to no to disable

View file

@ -64,6 +64,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define OLED_BRIGHTNESS 128
#define OLED_FONT_H "keyboards/mlego/m65/lib/glcdfont.c"
#endif
// you want to comment this if using stm32-dfu as bootloader
#define FEE_PAGE_BASE_ADDRESS 0x08008000

View file

@ -1,88 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* STM32F401xE memory setup.
*/
MEMORY
{
flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
flash1 (rx) : org = 0x08004000, len = 16k
flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */
flash3 (rx) : org = 0x0800C000, len = 16k
flash4 (rx) : org = 0x08010000, len = 512k - 64k
flash5 (rx) : org = 0x00000000, len = 0
flash6 (rx) : org = 0x00000000, len = 0
flash7 (rx) : org = 0x00000000, len = 0
ram0 (wx) : org = 0x20000000, len = 96k
ram1 (wx) : org = 0x00000000, len = 0
ram2 (wx) : org = 0x00000000, len = 0
ram3 (wx) : org = 0x00000000, len = 0
ram4 (wx) : org = 0x00000000, len = 0
ram5 (wx) : org = 0x00000000, len = 0
ram6 (wx) : org = 0x00000000, len = 0
ram7 (wx) : org = 0x00000000, len = 0
}
/* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash4);
REGION_ALIAS("VECTORS_FLASH_LMA", flash4);
/* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash4);
REGION_ALIAS("XTORS_FLASH_LMA", flash4);
/* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash4);
REGION_ALIAS("TEXT_FLASH_LMA", flash4);
/* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash4);
REGION_ALIAS("RODATA_FLASH_LMA", flash4);
/* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash4);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash4);
/* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4);
/* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by
the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash4);
/* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0);
/* Generic rules inclusion.*/
INCLUDE rules.ld
/* TinyUF2 bootloader reset support */
_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */

View file

@ -5,8 +5,6 @@ BOARD = BLACKPILL_STM32_F401
# Bootloader selection
BOOTLOADER = tinyuf2
#BOOTLOADER = stm32-dfu
MCU_LDSCRIPT = STM32F401xE
EEPROM_DRIVER = vendor
# Build Options
# change yes to no to disable

View file

@ -8,10 +8,6 @@ BOOTLOADER := tinyuf2
SERIAL_DRIVER ?= usart
WS2812_DRIVER ?= bitbang
EEPROM_DRIVER = wear_leveling
WEAR_LEVELING_DRIVER = legacy
ifeq ($(strip $(STMC_US)), yes)
OPT_DEFS += -DSTEMCELL_UART_SWAP
endif