forked from forks/qmk_firmware
This commit is contained in:
climbalima
commit
5cac51a773
|
|
@ -1,3 +1,82 @@
|
|||
<<<<<<< HEAD
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
=======
|
||||
SRC += matrix.c \
|
||||
i2c.c \
|
||||
split_util.c \
|
||||
serial.c
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= yes # Audio output on port C6
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
USE_I2C ?= yes
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
|
||||
CUSTOM_MATRIX = yes
|
||||
SUBPROJECT_DEFAULT = rev2
|
||||
ifndef QUANTUM_DIR
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
include ../../Makefile
|
||||
endif
|
||||
|
|
@ -61,6 +61,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
<<<<<<< HEAD
|
||||
=======
|
||||
<<<<<<< HEAD
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
#ifdef SUBPROJECT_rev1
|
||||
#include "rev1/config.h"
|
||||
#endif
|
||||
|
|
@ -68,3 +72,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#include "rev2/config.h"
|
||||
#endif
|
||||
#endif
|
||||
<<<<<<< HEAD
|
||||
=======
|
||||
|
||||
|
||||
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
|
|
|
|||
|
|
@ -29,6 +29,7 @@ enum custom_keycodes {
|
|||
#define XXXXXXX KC_NO
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
<<<<<<< HEAD
|
||||
|
||||
/* Qwerty
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
|
|
@ -82,41 +83,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \
|
||||
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \
|
||||
ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
|
||||
=======
|
||||
[0] = KEYMAP( \
|
||||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, \
|
||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
|
||||
KC_LCTL, _LOWER, KC_LGUI, KC_LALT, MO(_LOWER), KC_SPC, KC_SPC, MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
),
|
||||
|
||||
/* Lower
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_LOWER] = KEYMAP( \
|
||||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
|
||||
[3] = KEYMAP( \
|
||||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, \
|
||||
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
|
||||
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
|
||||
<<<<<<< HEAD
|
||||
_______, _______, _______, _______, _______, KC_BSPC, MT(MOD_LSFT, KC_BSPC), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
|
||||
=======
|
||||
_______, _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
),
|
||||
|
||||
/* Raise
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp |
|
||||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_RAISE] = KEYMAP( \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \
|
||||
[4] = KEYMAP( \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, \
|
||||
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \
|
||||
<<<<<<< HEAD
|
||||
_______, _______, _______, _______, _______, KC_ENT, MT(MOD_LSFT, KC_ENT), _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
|
||||
),
|
||||
|
||||
|
|
@ -139,6 +128,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
)
|
||||
|
||||
|
||||
=======
|
||||
_______, _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
|
||||
),
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
};
|
||||
|
||||
#ifdef AUDIO_ENABLE
|
||||
|
|
|
|||
|
|
@ -1,2 +1,6 @@
|
|||
#include "lets_split.h"
|
||||
|
||||
<<<<<<< HEAD
|
||||
=======
|
||||
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
|
|
|
|||
|
|
@ -25,7 +25,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define PRODUCT_ID 0x3060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Wootpatoot
|
||||
<<<<<<< HEAD
|
||||
#define PRODUCT Lets Split
|
||||
=======
|
||||
#define PRODUCT Lets Split v1
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
#define DESCRIPTION A split keyboard for the cheap makers
|
||||
|
||||
/* key matrix size */
|
||||
|
|
@ -41,11 +45,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
// #define USE_I2C
|
||||
|
||||
<<<<<<< HEAD
|
||||
// Use serial if not using I2C
|
||||
#ifndef USE_I2C
|
||||
# define USE_SERIAL
|
||||
#endif
|
||||
|
||||
=======
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
// #define EE_HANDS
|
||||
|
||||
#define I2C_MASTER_LEFT
|
||||
|
|
@ -74,9 +81,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
)
|
||||
|
||||
/* ws2812 RGB LED */
|
||||
<<<<<<< HEAD
|
||||
#define RGB_DI_PIN D4
|
||||
#define RGBLIGHT_TIMER
|
||||
#define RGBLED_NUM 8 // Number of LEDs
|
||||
=======
|
||||
#define ws2812_PORTREG PORTD
|
||||
#define ws2812_DDRREG DDRD
|
||||
#define ws2812_pin PD1
|
||||
#define RGBLED_NUM 28 // Number of LEDs
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
|
@ -99,4 +113,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
<<<<<<< HEAD
|
||||
#endif
|
||||
=======
|
||||
#endif
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
|
|
|
|||
|
|
@ -24,9 +24,15 @@ void matrix_init_kb(void) {
|
|||
};
|
||||
|
||||
void shutdown_user(void) {
|
||||
<<<<<<< HEAD
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
|
||||
_delay_ms(150);
|
||||
stop_all_notes();
|
||||
#endif
|
||||
=======
|
||||
PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
|
||||
_delay_ms(150);
|
||||
stop_all_notes();
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,9 +1,15 @@
|
|||
#ifndef REV1_H
|
||||
#define REV1_H
|
||||
|
||||
<<<<<<< HEAD
|
||||
#include "../lets_split.h"
|
||||
|
||||
//void promicro_bootloader_jmp(bool program);
|
||||
=======
|
||||
#include "quantum.h"
|
||||
|
||||
void promicro_bootloader_jmp(bool program);
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \
|
||||
|
|
|
|||
|
|
@ -41,11 +41,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
// #define USE_I2C
|
||||
|
||||
<<<<<<< HEAD
|
||||
// Use serial if not using I2C
|
||||
#ifndef USE_I2C
|
||||
# define USE_SERIAL
|
||||
#endif
|
||||
|
||||
=======
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
// #define EE_HANDS
|
||||
|
||||
#define I2C_MASTER_LEFT
|
||||
|
|
@ -74,9 +77,16 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
)
|
||||
|
||||
/* ws2812 RGB LED */
|
||||
<<<<<<< HEAD
|
||||
#define RGB_DI_PIN D3
|
||||
#define RGBLIGHT_TIMER
|
||||
#define RGBLED_NUM 12 // Number of LEDs
|
||||
=======
|
||||
#define ws2812_PORTREG PORTD
|
||||
#define ws2812_DDRREG DDRD
|
||||
#define ws2812_pin PD1
|
||||
#define RGBLED_NUM 28 // Number of LEDs
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
#define RGBLIGHT_HUE_STEP 10
|
||||
#define RGBLIGHT_SAT_STEP 17
|
||||
#define RGBLIGHT_VAL_STEP 17
|
||||
|
|
@ -99,4 +109,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
<<<<<<< HEAD
|
||||
#endif
|
||||
=======
|
||||
#endif
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
|
|
|
|||
|
|
@ -24,9 +24,15 @@ void matrix_init_kb(void) {
|
|||
};
|
||||
|
||||
void shutdown_user(void) {
|
||||
<<<<<<< HEAD
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
|
||||
_delay_ms(150);
|
||||
stop_all_notes();
|
||||
#endif
|
||||
=======
|
||||
PLAY_NOTE_ARRAY(tone_goodbye, false, 0);
|
||||
_delay_ms(150);
|
||||
stop_all_notes();
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,9 +1,15 @@
|
|||
#ifndef REV2_H
|
||||
#define REV2_H
|
||||
|
||||
<<<<<<< HEAD
|
||||
#include "../lets_split.h"
|
||||
|
||||
//void promicro_bootloader_jmp(bool program);
|
||||
=======
|
||||
#include "quantum.h"
|
||||
|
||||
void promicro_bootloader_jmp(bool program);
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
|
||||
#define KEYMAP( \
|
||||
k00, k01, k02, k03, k04, k05, k45, k44, k43, k42, k41, k40, \
|
||||
|
|
|
|||
|
|
@ -1,3 +1,81 @@
|
|||
<<<<<<< HEAD
|
||||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
=======
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../Makefile
|
||||
endif
|
||||
|
||||
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
|
|
|
|||
|
|
@ -24,9 +24,15 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
<<<<<<< HEAD
|
||||
#define MANUFACTURER You
|
||||
#define PRODUCT maxipad
|
||||
#define DESCRIPTION A custom keyboard
|
||||
=======
|
||||
#define MANUFACTURER Wootpatoot
|
||||
#define PRODUCT maxipad
|
||||
#define DESCRIPTION g8ming keeb
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
|
|
|
|||
|
|
@ -10,8 +10,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
),
|
||||
[1] = KEYMAP(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, \
|
||||
<<<<<<< HEAD
|
||||
KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, \
|
||||
=======
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \
|
||||
),
|
||||
|
|
|
|||
|
|
@ -3,7 +3,11 @@ maxipad keyboard firmware
|
|||
|
||||
## Quantum MK Firmware
|
||||
|
||||
<<<<<<< HEAD
|
||||
For the full Quantum feature list, see [the parent readme](/).
|
||||
=======
|
||||
For the full Quantum feature list, see [the parent readme.md](/doc/readme.md).
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
|
||||
## Building
|
||||
|
||||
|
|
@ -13,12 +17,17 @@ Depending on which keymap you would like to use, you will have to compile slight
|
|||
|
||||
### Default
|
||||
|
||||
<<<<<<< HEAD
|
||||
To build with the default keymap, simply run `make default`.
|
||||
=======
|
||||
To build with the default keymap, simply run `make`.
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
|
||||
### Other Keymaps
|
||||
|
||||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
|
||||
|
||||
<<<<<<< HEAD
|
||||
To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
|
||||
|
||||
```
|
||||
|
|
@ -26,3 +35,12 @@ $ make [default|jack|<name>]
|
|||
```
|
||||
|
||||
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
|
||||
=======
|
||||
To build the firmware binary hex file with a keymap just do `make` with `keymap` option like:
|
||||
|
||||
```
|
||||
$ make keymap=[default|jack|<name>]
|
||||
```
|
||||
|
||||
Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
|
||||
>>>>>>> bce6e52391da7c5f620c96a91857940f0dee19df
|
||||
|
|
|
|||
Loading…
Reference in a new issue