Fixup handwired/kbod (#18754)

keyboards/handwired/kbod/config.h

@@ -23,60 +23,21 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 8
 #define MATRIX_COLS 8
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
 #define MATRIX_ROW_PINS { C6, D7, E6, B4, B5, B6, B7, D6 }
 #define MATRIX_COL_PINS { D0, D1, F0, F1, F4, F5, F6, F7 }
 
-/* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-// #define BACKLIGHT_PIN B7
+#define LED_CAPS_LOCK_PIN B0
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
 
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
 /*
  * Feature disable options
  *  These options are also useful to firmware size reduction.
@@ -93,5 +54,4 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define NO_ACTION_TAPPING
 //#define NO_ACTION_ONESHOT
 
-#undef TAPPING_TOGGLE
 #define TAPPING_TOGGLE 2

keyboards/handwired/kbod/keymaps/default/keymap.c

@@ -61,7 +61,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
     case SFT_ESC:
-      SET_WHETHER(MODS_PRESSED(SHIFT), KC_ESC, KC_GRAVE);
+      SET_WHETHER(MODS_PRESSED(SFT), KC_ESC, KC_GRAVE);
 
       return false;
 
@@ -75,24 +75,16 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   }
 }
 
-void led_set_user(uint8_t usb_led) {
-  if (usb_led & _BV(USB_LED_CAPS_LOCK)) {
-    PORTB |= _BV(PB0);
-  } else {
-    PORTB &= ~_BV(PB0);
-  }
-}
-
 void matrix_init_user(void) {
-  DDRB |= _BV(PB0);
+  setPinOutput(C7);
-  DDRC |= _BV(PC7);
+  writePinLow(C7);
 }
 
-void matrix_scan_user(void) {
+layer_state_t layer_state_set_user(layer_state_t state) {
-  uint8_t layer = get_highest_layer(layer_state);
+  if (get_highest_layer(state)) {
-  if (layer) {
+    writePinHigh(C7);
-    PORTC |= _BV(PC7);
   } else {
-    PORTC &= ~_BV(PC7);
+    writePinLow(C7);
   }
+  return state;
 }

keyboards/handwired/kbod/keymaps/default/readme.md

@@ -1,5 +0,0 @@
-# The default keymap for kbod
-
-This is the default keymap for kbod,
-
-it consists of a base layer with QWERTY layout, a momentary cursor-layer, and mouse-keys and multimedia layers.

keyboards/handwired/kbod/keymaps/default/rules.mk

@@ -1,9 +0,0 @@
-BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
-CONSOLE_ENABLE = no         # Console for debug(+400)
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = yes
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-AUDIO_ENABLE = no           # Audio output
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.