forked from forks/qmk_firmware
Added Daisy port (#2016)
* Add files via upload * Update readme.md * Update readme.md * Update readme.md * Add files via upload * Delete config.h * Delete rules.mk * Add files via upload * Update config.h * revised config files * revised readme * Update readme.md * Update readme.md
This commit is contained in:
Max
Jack Humbert
parent
62eed0e4a3
commit
dcc363390f
175
keyboards/daisy/config.h
Normal file
175
keyboards/daisy/config.h
Normal file
|
|
@ -0,0 +1,175 @@
|
|||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x1209
|
||||
#define PRODUCT_ID 0x2328
|
||||
#define DEVICE_VER 0x501
|
||||
#define MANUFACTURER K.T.E.C.
|
||||
#define PRODUCT Daisy
|
||||
#define DESCRIPTION qmk port for Daisy
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 11
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D2, D3, D5, B7 }
|
||||
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define BACKLIGHT_PIN D0
|
||||
#define BACKLIGHT_LEVELS 6
|
||||
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
// ws2812 options
|
||||
#define RGB_DI_PIN C7 // pin the DI on the ws2812 is hooked-up to
|
||||
#define RGBLIGHT_ANIMATIONS // run RGB animations
|
||||
#define RGBLED_NUM 8 // number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue
|
||||
#define RGBLIGHT_SAT_STEP 25 // units to step when in/decresing saturation
|
||||
#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness)
|
||||
|
||||
/*
|
||||
* MIDI options
|
||||
*/
|
||||
|
||||
/* Prevent use of disabled MIDI features in the keymap */
|
||||
//#define MIDI_ENABLE_STRICT 1
|
||||
|
||||
/* enable basic MIDI features:
|
||||
- MIDI notes can be sent when in Music mode is on
|
||||
*/
|
||||
//#define MIDI_BASIC
|
||||
|
||||
/* enable advanced MIDI features:
|
||||
- MIDI notes can be added to the keymap
|
||||
- Octave shift and transpose
|
||||
- Virtual sustain, portamento, and modulation wheel
|
||||
- etc.
|
||||
*/
|
||||
//#define MIDI_ADVANCED
|
||||
|
||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||
|
||||
#endif
|
||||
15
keyboards/daisy/daisy.c
Normal file
15
keyboards/daisy/daisy.c
Normal file
|
|
@ -0,0 +1,15 @@
|
|||
#include "daisy.h"
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// output low
|
||||
DDRC |= (1<<PC6);
|
||||
PORTC &= ~(1<<PC6);
|
||||
} else {
|
||||
// Hi-Z
|
||||
DDRC &= ~(1<<PC6);
|
||||
PORTC &= ~(1<<PC6);
|
||||
}
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
19
keyboards/daisy/daisy.h
Normal file
19
keyboards/daisy/daisy.h
Normal file
|
|
@ -0,0 +1,19 @@
|
|||
#ifndef DAISY_H
|
||||
#define DAISY_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define KEYMAP( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K3A, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, \
|
||||
K30, K31, K32, K34, K35, K37, K38, K39 \
|
||||
) \
|
||||
{ \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A }, \
|
||||
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A }, \
|
||||
{ K30, K31, K32, KC_NO, K34, K35, KC_NO, K37, K38, K39, K3A } \
|
||||
}
|
||||
|
||||
#endif
|
||||
99
keyboards/daisy/keymaps/default/keymap.c
Normal file
99
keyboards/daisy/keymaps/default/keymap.c
Normal file
|
|
@ -0,0 +1,99 @@
|
|||
#include "daisy.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
// Layer shorthand
|
||||
#define _BL 0
|
||||
#define _LW 1
|
||||
#define _RS 2
|
||||
|
||||
enum layer_keycodes {
|
||||
QWERTY = SAFE_RANGE, LOWER, RAISE
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* Base Layer
|
||||
* .-----------------------------------------------------------------------.
|
||||
* | ESC | Q | W | E | R | T | Y | U | I | O | P | \| |
|
||||
* |-----------------------------------------------------------------------|
|
||||
* | TAB | A | S | D | F | G | H | J | K | L | ENTER |
|
||||
* |-----------------------------------------------------------------------|
|
||||
* | LSHIFT | Z | X | C | V | B | N | M | ,< | .> | /? |
|
||||
* |-----------------------------------------------------------------------|
|
||||
* | LCTRL | LGUI | LALT | SPACE | BACKSPACE | LW | RS | RALT |
|
||||
* '-----------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[_BL] = KEYMAP(
|
||||
GRAVE_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
|
||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_BSPC, LOWER, RAISE, KC_RALT ),
|
||||
|
||||
|
||||
/* Function Layer
|
||||
* .-----------------------------------------------------------------------.
|
||||
* | GRV | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | -_ |
|
||||
* |-----------------------------------------------------------------------|
|
||||
* | | =+ | UP | | | | [{ | ]} | ;: | '" | |
|
||||
* |-----------------------------------------------------------------------|
|
||||
* | | LEFT| DOWN |RIGHT| | | | | | | |
|
||||
* |-----------------------------------------------------------------------|
|
||||
* | | | | | DELETE | | | |
|
||||
* '-----------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[_LW] = KEYMAP(
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
|
||||
KC_TRNS, KC_EQL, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_SCLN, KC_QUOT, KC_TRNS,
|
||||
KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS ),
|
||||
|
||||
|
||||
/* Second Function Layer
|
||||
* .-----------------------------------------------------------------------.
|
||||
* | RST | F1 | F2 | F3 | F4 | F5 | F6 | | HOME| PGUP| | |
|
||||
* |-----------------------------------------------------------------------|
|
||||
* | | F7 | F8 | F9 | F10 | F11 | F12 | | END | PGDN| |
|
||||
* |-----------------------------------------------------------------------|
|
||||
* | |RGBtog|RGBmod|RGBhud|RGBhui|RGBvad|RGBvai|RGBsad|RGBsai|BL| |
|
||||
* |-----------------------------------------------------------------------|
|
||||
* | | | | | | | | |
|
||||
* '-----------------------------------------------------------------------'
|
||||
*/
|
||||
|
||||
[_RS] = KEYMAP(
|
||||
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_END, KC_PGDN, KC_TRNS,
|
||||
KC_TRNS, RGB_TOG, RGB_SMOD, RGB_HUD, RGB_HUI, RGB_VAD, RGB_VAI, RGB_SAD, RGB_SAI, BL_STEP, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ),
|
||||
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case LOWER:
|
||||
if(record->event.pressed){
|
||||
layer_on(_LW);
|
||||
} else {
|
||||
layer_off(_LW);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case RAISE:
|
||||
if(record->event.pressed){
|
||||
layer_on(_RS);
|
||||
} else {
|
||||
layer_off(_RS);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
};
|
||||
5
keyboards/daisy/keymaps/default/readme.md
Normal file
5
keyboards/daisy/keymaps/default/readme.md
Normal file
|
|
@ -0,0 +1,5 @@
|
|||
|
||||
|
||||
# Default Daisy Layout
|
||||
|
||||
This is the default layout as offered by KPRepublic's TMK firmware for the Daisy with a few minor tweaks for usability made by me.
|
||||
29
keyboards/daisy/readme.md
Normal file
29
keyboards/daisy/readme.md
Normal file
|
|
@ -0,0 +1,29 @@
|
|||
# Daisy
|
||||
|
||||
A 40% keyboard kit sold by KPRepublic.
|
||||
|
||||
Keyboard Maintainer: westfoxtrot (https://github.com/westfoxtrot)
|
||||
Hardware Supported: Daisy PCB Rev.1, Daisy PCB Rev.2
|
||||
Hardware Availability: http://tinyurl.com/yc26lq22
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make daisy:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
|
||||
|
||||
# Other Keymaps
|
||||
|
||||
The "default" keymap included is the layout I personally use on the Daisy and the one I have found the most comfortable.
|
||||
|
||||
A printable picture showing this layout is available here: https://imgur.com/9mSF0yf
|
||||
|
||||
|
||||
```
|
||||
$ make daisy:[default|<name>]
|
||||
```
|
||||
|
||||
# Bootloader
|
||||
|
||||
I personally had issues with the bootloader on my Daisy PCB and was unable to flash a firmware to the board after the first time. I replaced the bootloader with the one available in the repository at ../../util/bootloader_atmega32u4_1_0_0.hex
|
||||
66
keyboards/daisy/rules.mk
Normal file
66
keyboards/daisy/rules.mk
Normal file
|
|
@ -0,0 +1,66 @@
|
|||
# MCU name
|
||||
#MCU = at90usb1286
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4996
|
||||
|
||||
# QMK Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
Loading…
Reference in a new issue