varl/qmk_firmware
1
0
Fork 0
forked from forks/qmk_firmware
Code Pull requests Activity

LED drivers: register naming cleanups (#22436)

Browse source
This commit is contained in:
Ryan 2023-11-21 02:48:23 +11:00 committed by GitHub
parent e279c78ba3
commit dda6e7fb36
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
51 changed files with 684 additions and 671 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

47
drivers/led/aw20216s.c
View file

@ -19,39 +19,16 @@
#include "wait.h"
#include "spi_master.h"
/* The AW20216S appears to be somewhat similar to the IS31FL743, although quite
* a few things are different, such as the command byte format and page ordering.
* The LED addresses start from 0x00 instead of 0x01.
*/
#define AW20216S_ID 0b1010 << 4
#define AW20216S_PAGE_FUNCTION 0x00 << 1 // PG0, Function registers
#define AW20216S_PAGE_PWM 0x01 << 1 // PG1, LED PWM control
#define AW20216S_PAGE_SCALING 0x02 << 1 // PG2, LED current scaling control
#define AW20216S_PAGE_PATCHOICE 0x03 << 1 // PG3, Pattern choice?
#define AW20216S_PAGE_PWMSCALING 0x04 << 1 // PG4, LED PWM + Scaling control?
#define AW20216S_WRITE 0
#define AW20216S_READ 1
#define AW20216S_REG_CONFIGURATION 0x00 // PG0
#define AW20216S_REG_GLOBALCURRENT 0x01 // PG0
#define AW20216S_REG_RESET 0x2F // PG0
#define AW20216S_REG_MIXFUNCTION 0x46 // PG0
// Default value of AW20216S_REG_CONFIGURATION
// D7:D4 = 1011, SWSEL (SW1~SW12 active)
// D3 = 0?, reserved (apparently this should be 1 but it doesn't seem to matter)
// D2:D1 = 00, OSDE (open/short detection enable)
// D0 = 0, CHIPEN (write 1 to enable LEDs when hardware enable pulled high)
#define AW20216S_CONFIG_DEFAULT 0b10110000
#define AW20216S_MIXCR_DEFAULT 0b00000000
#define AW20216S_RESET_CMD 0xAE
#define AW20216S_CHIPEN 1
#define AW20216S_LPEN (0x01 << 1)
#define AW20216S_PWM_REGISTER_COUNT 216
#ifndef AW20216S_CONFIGURATION
# define AW20216S_CONFIGURATION (AW20216S_CONFIGURATION_SWSEL_1_12 | AW20216S_CONFIGURATION_CHIPEN)
#endif
#ifndef AW20216S_MIX_FUNCTION
# define AW20216S_MIX_FUNCTION (AW20216S_MIX_FUNCTION_LPEN)
#endif
#ifndef AW20216S_SCALING_MAX
# define AW20216S_SCALING_MAX 150
#endif
@ -102,7 +79,7 @@ static inline bool aw20216s_write_register(pin_t cs_pin, uint8_t page, uint8_t r
}
void aw20216s_soft_reset(pin_t cs_pin) {
aw20216s_write_register(cs_pin, AW20216S_PAGE_FUNCTION, AW20216S_REG_RESET, AW20216S_RESET_CMD);
aw20216s_write_register(cs_pin, AW20216S_PAGE_FUNCTION, AW20216S_FUNCTION_REG_RESET, AW20216S_RESET_MAGIC);
}
static void aw20216s_init_scaling(pin_t cs_pin) {
@ -114,16 +91,16 @@ static void aw20216s_init_scaling(pin_t cs_pin) {
static inline void aw20216s_init_current_limit(pin_t cs_pin) {
// Push config
aw20216s_write_register(cs_pin, AW20216S_PAGE_FUNCTION, AW20216S_REG_GLOBALCURRENT, AW20216S_GLOBAL_CURRENT_MAX);
aw20216s_write_register(cs_pin, AW20216S_PAGE_FUNCTION, AW20216S_FUNCTION_REG_GLOBAL_CURRENT, AW20216S_GLOBAL_CURRENT_MAX);
}
static inline void aw20216s_soft_enable(pin_t cs_pin) {
// Push config
aw20216s_write_register(cs_pin, AW20216S_PAGE_FUNCTION, AW20216S_REG_CONFIGURATION, AW20216S_CONFIG_DEFAULT | AW20216S_CHIPEN);
aw20216s_write_register(cs_pin, AW20216S_PAGE_FUNCTION, AW20216S_FUNCTION_REG_CONFIGURATION, AW20216S_CONFIGURATION);
}
static inline void aw20216s_auto_lowpower(pin_t cs_pin) {
aw20216s_write_register(cs_pin, AW20216S_PAGE_FUNCTION, AW20216S_REG_MIXFUNCTION, AW20216S_MIXCR_DEFAULT | AW20216S_LPEN);
aw20216s_write_register(cs_pin, AW20216S_PAGE_FUNCTION, AW20216S_FUNCTION_REG_MIX_FUNCTION, AW20216S_MIX_FUNCTION);
}
void aw20216s_init_drivers(void) {

22
drivers/led/aw20216s.h
View file

@ -52,6 +52,28 @@
#define g_aw_leds g_aw20216s_leds
// ========
#define AW20216S_ID (0b1010 << 4)
#define AW20216S_WRITE 0
#define AW20216S_READ 1
#define AW20216S_PAGE_FUNCTION (0x00 << 1)
#define AW20216S_PAGE_PWM (0x01 << 1)
#define AW20216S_PAGE_SCALING (0x02 << 1)
#define AW20216S_PAGE_PATTERN_CHOICE (0x03 << 1)
#define AW20216S_PAGE_PWM_SCALING (0x04 << 1)
#define AW20216S_FUNCTION_REG_CONFIGURATION 0x00
#define AW20216S_CONFIGURATION_SWSEL_1_12 (0b1011 << 4)
#define AW20216S_CONFIGURATION_CHIPEN (0b1 << 0)
#define AW20216S_FUNCTION_REG_GLOBAL_CURRENT 0x01
#define AW20216S_FUNCTION_REG_RESET 0x2F
#define AW20216S_RESET_MAGIC 0xAE
#define AW20216S_FUNCTION_REG_MIX_FUNCTION 0x46
#define AW20216S_MIX_FUNCTION_LPEN (0b1 << 1)
#if defined(RGB_MATRIX_AW20216S)
# define AW20216S_LED_COUNT RGB_MATRIX_LED_COUNT
#endif

11
drivers/led/issi/is31fl3218-simple.c
View file

@ -17,13 +17,6 @@
#include <string.h>
#include "i2c_master.h"
// These are the register addresses
#define IS31FL3218_REG_SHUTDOWN 0x00
#define IS31FL3218_REG_PWM 0x01
#define IS31FL3218_REG_CONTROL 0x13
#define IS31FL3218_REG_UPDATE 0x16
#define IS31FL3218_REG_RESET 0x17
#define IS31FL3218_PWM_REGISTER_COUNT 18
#define IS31FL3218_LED_CONTROL_REGISTER_COUNT 3
@ -86,7 +79,7 @@ void is31fl3218_init(void) {
// turn off all LEDs in the LED control register
for (uint8_t i = 0; i < IS31FL3218_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3218_write_register(IS31FL3218_REG_CONTROL + i, 0x00);
is31fl3218_write_register(IS31FL3218_REG_LED_CONTROL_1 + i, 0x00);
}
// Load PWM registers and LED Control register data
@ -146,7 +139,7 @@ void is31fl3218_update_pwm_buffers(void) {
void is31fl3218_update_led_control_registers(void) {
if (g_led_control_registers_update_required) {
for (int i = 0; i < IS31FL3218_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3218_write_register(IS31FL3218_REG_CONTROL + i, g_led_control_registers[i]);
is31fl3218_write_register(IS31FL3218_REG_LED_CONTROL_1 + i, g_led_control_registers[i]);
}
g_led_control_registers_update_required = false;

8
drivers/led/issi/is31fl3218-simple.h
View file

@ -21,6 +21,14 @@
#include "progmem.h"
#include "util.h"
#define IS31FL3218_REG_SHUTDOWN 0x00
#define IS31FL3218_REG_PWM 0x01
#define IS31FL3218_REG_LED_CONTROL_1 0x13
#define IS31FL3218_REG_LED_CONTROL_2 0x14
#define IS31FL3218_REG_LED_CONTROL_3 0x15
#define IS31FL3218_REG_UPDATE 0x16
#define IS31FL3218_REG_RESET 0x17
#define IS31FL3218_I2C_ADDRESS 0x54
#if defined(LED_MATRIX_IS31FL3218)

11
drivers/led/issi/is31fl3218.c
View file

@ -17,13 +17,6 @@
#include <string.h>
#include "i2c_master.h"
// These are the register addresses
#define IS31FL3218_REG_SHUTDOWN 0x00
#define IS31FL3218_REG_PWM 0x01
#define IS31FL3218_REG_CONTROL 0x13
#define IS31FL3218_REG_UPDATE 0x16
#define IS31FL3218_REG_RESET 0x17
#define IS31FL3218_PWM_REGISTER_COUNT 18
#define IS31FL3218_LED_CONTROL_REGISTER_COUNT 3
@ -86,7 +79,7 @@ void is31fl3218_init(void) {
// turn off all LEDs in the LED control register
for (uint8_t i = 0; i < IS31FL3218_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3218_write_register(IS31FL3218_REG_CONTROL + i, 0x00);
is31fl3218_write_register(IS31FL3218_REG_LED_CONTROL_1 + i, 0x00);
}
// Load PWM registers and LED Control register data
@ -162,7 +155,7 @@ void is31fl3218_update_pwm_buffers(void) {
void is31fl3218_update_led_control_registers(void) {
if (g_led_control_registers_update_required) {
for (int i = 0; i < IS31FL3218_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3218_write_register(IS31FL3218_REG_CONTROL + i, g_led_control_registers[i]);
is31fl3218_write_register(IS31FL3218_REG_LED_CONTROL_1 + i, g_led_control_registers[i]);
}
g_led_control_registers_update_required = false;

8
drivers/led/issi/is31fl3218.h
View file

@ -21,6 +21,14 @@
#include "progmem.h"
#include "util.h"
#define IS31FL3218_REG_SHUTDOWN 0x00
#define IS31FL3218_REG_PWM 0x01
#define IS31FL3218_REG_LED_CONTROL_1 0x13
#define IS31FL3218_REG_LED_CONTROL_2 0x14
#define IS31FL3218_REG_LED_CONTROL_3 0x15
#define IS31FL3218_REG_UPDATE 0x16
#define IS31FL3218_REG_RESET 0x17
#define IS31FL3218_I2C_ADDRESS 0x54
#if defined(RGB_MATRIX_IS31FL3218)

40
drivers/led/issi/is31fl3731-simple.c
View file

@ -22,26 +22,6 @@
#include "i2c_master.h"
#include "wait.h"
#define IS31FL3731_REG_CONFIG 0x00
#define IS31FL3731_REG_CONFIG_PICTUREMODE 0x00
#define IS31FL3731_REG_CONFIG_AUTOPLAYMODE 0x08
#define IS31FL3731_REG_CONFIG_AUDIOPLAYMODE 0x18
#define IS31FL3731_CONF_PICTUREMODE 0x00
#define IS31FL3731_CONF_AUTOFRAMEMODE 0x04
#define IS31FL3731_CONF_AUDIOMODE 0x08
#define IS31FL3731_REG_PICTUREFRAME 0x01
// Not defined in the datasheet -- See AN for IC
#define IS31FL3731_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting
#define IS31FL3731_REG_SHUTDOWN 0x0A
#define IS31FL3731_REG_AUDIOSYNC 0x06
#define IS31FL3731_COMMANDREGISTER 0xFD
#define IS31FL3731_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
#define IS31FL3731_PWM_REGISTER_COUNT 144
#define IS31FL3731_LED_CONTROL_REGISTER_COUNT 18
@ -144,26 +124,26 @@ void is31fl3731_init(uint8_t addr) {
// then disable software shutdown.
// select "function register" bank
is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, IS31FL3731_BANK_FUNCTIONREG);
is31fl3731_write_register(addr, IS31FL3731_REG_COMMAND, IS31FL3731_COMMAND_FUNCTION);
// enable software shutdown
is31fl3731_write_register(addr, IS31FL3731_REG_SHUTDOWN, 0x00);
is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_SHUTDOWN, 0x00);
#ifdef IS31FL3731_DEGHOST // set to enable de-ghosting of the array
is31fl3731_write_register(addr, IS31FL3731_REG_GHOST_IMAGE_PREVENTION, 0x10);
is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_GHOST_IMAGE_PREVENTION, IS31FL3731_GHOST_IMAGE_PREVENTION_GEN);
#endif
// this delay was copied from other drivers, might not be needed
wait_ms(10);
// picture mode
is31fl3731_write_register(addr, IS31FL3731_REG_CONFIG, IS31FL3731_REG_CONFIG_PICTUREMODE);
is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_CONFIG, IS31FL3731_CONFIG_MODE_PICTURE);
// display frame 0
is31fl3731_write_register(addr, IS31FL3731_REG_PICTUREFRAME, 0x00);
is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_PICTURE_DISPLAY, 0x00);
// audio sync off
is31fl3731_write_register(addr, IS31FL3731_REG_AUDIOSYNC, 0x00);
is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_AUDIO_SYNC, 0x00);
// select bank 0
is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, 0);
is31fl3731_write_register(addr, IS31FL3731_REG_COMMAND, IS31FL3731_COMMAND_FRAME_1);
// turn off all LEDs in the LED control register
for (int i = 0; i < IS31FL3731_LED_CONTROL_REGISTER_COUNT; i++) {
@ -181,15 +161,15 @@ void is31fl3731_init(uint8_t addr) {
}
// select "function register" bank
is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, IS31FL3731_BANK_FUNCTIONREG);
is31fl3731_write_register(addr, IS31FL3731_REG_COMMAND, IS31FL3731_COMMAND_FUNCTION);
// disable software shutdown
is31fl3731_write_register(addr, IS31FL3731_REG_SHUTDOWN, 0x01);
is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_SHUTDOWN, 0x01);
// select bank 0 and leave it selected.
// most usage after initialization is just writing PWM buffers in bank 0
// as there's not much point in double-buffering
is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, 0);
is31fl3731_write_register(addr, IS31FL3731_REG_COMMAND, IS31FL3731_COMMAND_FRAME_1);
}
void is31fl3731_set_value(int index, uint8_t value) {

24
drivers/led/issi/is31fl3731-simple.h
View file

@ -50,6 +50,30 @@
#define g_is31_leds g_is31fl3731_leds
// ========
#define IS31FL3731_REG_COMMAND 0xFD
#define IS31FL3731_COMMAND_FRAME_1 0x00
#define IS31FL3731_COMMAND_FRAME_2 0x01
#define IS31FL3731_COMMAND_FRAME_3 0x02
#define IS31FL3731_COMMAND_FRAME_4 0x03
#define IS31FL3731_COMMAND_FRAME_5 0x04
#define IS31FL3731_COMMAND_FRAME_6 0x05
#define IS31FL3731_COMMAND_FRAME_7 0x06
#define IS31FL3731_COMMAND_FRAME_8 0x07
#define IS31FL3731_COMMAND_FUNCTION 0x0B
#define IS31FL3731_FUNCTION_REG_CONFIG 0x00
#define IS31FL3731_CONFIG_MODE_PICTURE 0x00
#define IS31FL3731_CONFIG_MODE_AUTO_PLAY 0x08
#define IS31FL3731_CONFIG_MODE_AUDIO_PLAY 0x18
#define IS31FL3731_FUNCTION_REG_PICTURE_DISPLAY 0x01
#define IS31FL3731_FUNCTION_REG_AUDIO_SYNC 0x06
#define IS31FL3731_FUNCTION_REG_SHUTDOWN 0x0A
// Not defined in the datasheet -- See AN for IC
#define IS31FL3731_FUNCTION_REG_GHOST_IMAGE_PREVENTION 0xC2
#define IS31FL3731_GHOST_IMAGE_PREVENTION_GEN 0x10
#define IS31FL3731_I2C_ADDRESS_GND 0x74
#define IS31FL3731_I2C_ADDRESS_SCL 0x75
#define IS31FL3731_I2C_ADDRESS_SDA 0x76

40
drivers/led/issi/is31fl3731.c
View file

@ -21,26 +21,6 @@
#include "i2c_master.h"
#include "wait.h"
#define IS31FL3731_REG_CONFIG 0x00
#define IS31FL3731_REG_CONFIG_PICTUREMODE 0x00
#define IS31FL3731_REG_CONFIG_AUTOPLAYMODE 0x08
#define IS31FL3731_REG_CONFIG_AUDIOPLAYMODE 0x18
#define IS31FL3731_CONF_PICTUREMODE 0x00
#define IS31FL3731_CONF_AUTOFRAMEMODE 0x04
#define IS31FL3731_CONF_AUDIOMODE 0x08
#define IS31FL3731_REG_PICTUREFRAME 0x01
// Not defined in the datasheet -- See AN for IC
#define IS31FL3731_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting
#define IS31FL3731_REG_SHUTDOWN 0x0A
#define IS31FL3731_REG_AUDIOSYNC 0x06
#define IS31FL3731_COMMANDREGISTER 0xFD
#define IS31FL3731_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
#define IS31FL3731_PWM_REGISTER_COUNT 144
#define IS31FL3731_LED_CONTROL_REGISTER_COUNT 18
@ -141,26 +121,26 @@ void is31fl3731_init(uint8_t addr) {
// then disable software shutdown.
// select "function register" bank
is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, IS31FL3731_BANK_FUNCTIONREG);
is31fl3731_write_register(addr, IS31FL3731_REG_COMMAND, IS31FL3731_COMMAND_FUNCTION);
// enable software shutdown
is31fl3731_write_register(addr, IS31FL3731_REG_SHUTDOWN, 0x00);
is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_SHUTDOWN, 0x00);
#ifdef IS31FL3731_DEGHOST // set to enable de-ghosting of the array
is31fl3731_write_register(addr, IS31FL3731_REG_GHOST_IMAGE_PREVENTION, 0x10);
is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_GHOST_IMAGE_PREVENTION, IS31FL3731_GHOST_IMAGE_PREVENTION_GEN);
#endif
// this delay was copied from other drivers, might not be needed
wait_ms(10);
// picture mode
is31fl3731_write_register(addr, IS31FL3731_REG_CONFIG, IS31FL3731_REG_CONFIG_PICTUREMODE);
is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_CONFIG, IS31FL3731_CONFIG_MODE_PICTURE);
// display frame 0
is31fl3731_write_register(addr, IS31FL3731_REG_PICTUREFRAME, 0x00);
is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_PICTURE_DISPLAY, 0x00);
// audio sync off
is31fl3731_write_register(addr, IS31FL3731_REG_AUDIOSYNC, 0x00);
is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_AUDIO_SYNC, 0x00);
// select bank 0
is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, 0);
is31fl3731_write_register(addr, IS31FL3731_REG_COMMAND, IS31FL3731_COMMAND_FRAME_1);
// turn off all LEDs in the LED control register
for (int i = 0; i < IS31FL3731_LED_CONTROL_REGISTER_COUNT; i++) {
@ -178,15 +158,15 @@ void is31fl3731_init(uint8_t addr) {
}
// select "function register" bank
is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, IS31FL3731_BANK_FUNCTIONREG);
is31fl3731_write_register(addr, IS31FL3731_REG_COMMAND, IS31FL3731_COMMAND_FUNCTION);
// disable software shutdown
is31fl3731_write_register(addr, IS31FL3731_REG_SHUTDOWN, 0x01);
is31fl3731_write_register(addr, IS31FL3731_FUNCTION_REG_SHUTDOWN, 0x01);
// select bank 0 and leave it selected.
// most usage after initialization is just writing PWM buffers in bank 0
// as there's not much point in double-buffering
is31fl3731_write_register(addr, IS31FL3731_COMMANDREGISTER, 0);
is31fl3731_write_register(addr, IS31FL3731_REG_COMMAND, IS31FL3731_COMMAND_FRAME_1);
}
void is31fl3731_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {

24
drivers/led/issi/is31fl3731.h
View file

@ -49,6 +49,30 @@
#define g_is31_leds g_is31fl3731_leds
// ========
#define IS31FL3731_REG_COMMAND 0xFD
#define IS31FL3731_COMMAND_FRAME_1 0x00
#define IS31FL3731_COMMAND_FRAME_2 0x01
#define IS31FL3731_COMMAND_FRAME_3 0x02
#define IS31FL3731_COMMAND_FRAME_4 0x03
#define IS31FL3731_COMMAND_FRAME_5 0x04
#define IS31FL3731_COMMAND_FRAME_6 0x05
#define IS31FL3731_COMMAND_FRAME_7 0x06
#define IS31FL3731_COMMAND_FRAME_8 0x07
#define IS31FL3731_COMMAND_FUNCTION 0x0B
#define IS31FL3731_FUNCTION_REG_CONFIG 0x00
#define IS31FL3731_CONFIG_MODE_PICTURE 0x00
#define IS31FL3731_CONFIG_MODE_AUTO_PLAY 0x08
#define IS31FL3731_CONFIG_MODE_AUDIO_PLAY 0x18
#define IS31FL3731_FUNCTION_REG_PICTURE_DISPLAY 0x01
#define IS31FL3731_FUNCTION_REG_AUDIO_SYNC 0x06
#define IS31FL3731_FUNCTION_REG_SHUTDOWN 0x0A
// Not defined in the datasheet -- See AN for IC
#define IS31FL3731_FUNCTION_REG_GHOST_IMAGE_PREVENTION 0xC2
#define IS31FL3731_GHOST_IMAGE_PREVENTION_GEN 0x10
#define IS31FL3731_I2C_ADDRESS_GND 0x74
#define IS31FL3731_I2C_ADDRESS_SCL 0x75
#define IS31FL3731_I2C_ADDRESS_SDA 0x76

48
drivers/led/issi/is31fl3733-simple.c
View file

@ -23,22 +23,6 @@
#include "i2c_master.h"
#include "wait.h"
#define IS31FL3733_COMMANDREGISTER 0xFD
#define IS31FL3733_COMMANDREGISTER_WRITELOCK 0xFE
#define IS31FL3733_INTERRUPTMASKREGISTER 0xF0
#define IS31FL3733_INTERRUPTSTATUSREGISTER 0xF1
#define IS31FL3733_PAGE_LEDCONTROL 0x00 // PG0
#define IS31FL3733_PAGE_PWM 0x01 // PG1
#define IS31FL3733_PAGE_AUTOBREATH 0x02 // PG2
#define IS31FL3733_PAGE_FUNCTION 0x03 // PG3
#define IS31FL3733_REG_CONFIGURATION 0x00 // PG3
#define IS31FL3733_REG_GLOBALCURRENT 0x01 // PG3
#define IS31FL3733_REG_RESET 0x11 // PG3
#define IS31FL3733_REG_SW_PULLUP 0x0F // PG3
#define IS31FL3733_REG_CS_PULLDOWN 0x10 // PG3
#define IS31FL3733_PWM_REGISTER_COUNT 192
#define IS31FL3733_LED_CONTROL_REGISTER_COUNT 24
@ -62,8 +46,8 @@
# define IS31FL3733_CSPULLDOWN IS31FL3733_PDR_0_OHM
#endif
#ifndef IS31FL3733_GLOBALCURRENT
# define IS31FL3733_GLOBALCURRENT 0xFF
#ifndef IS31FL3733_GLOBAL_CURRENT
# define IS31FL3733_GLOBAL_CURRENT 0xFF
#endif
#ifndef IS31FL3733_SYNC_1
@ -180,20 +164,20 @@ void is31fl3733_init(uint8_t addr, uint8_t sync) {
// Sync is passed so set it according to the datasheet.
// Unlock the command register.
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND_WRITE_LOCK, IS31FL3733_COMMAND_WRITE_LOCK_MAGIC);
// Select PG0
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND, IS31FL3733_COMMAND_LED_CONTROL);
// Turn off all LEDs.
for (int i = 0; i < IS31FL3733_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3733_write_register(addr, i, 0x00);
}
// Unlock the command register.
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND_WRITE_LOCK, IS31FL3733_COMMAND_WRITE_LOCK_MAGIC);
// Select PG1
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND, IS31FL3733_COMMAND_PWM);
// Set PWM on all LEDs to 0
// No need to setup Breath registers to PWM as that is the default.
for (int i = 0; i < IS31FL3733_PWM_REGISTER_COUNT; i++) {
@ -201,18 +185,18 @@ void is31fl3733_init(uint8_t addr, uint8_t sync) {
}
// Unlock the command register.
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND_WRITE_LOCK, IS31FL3733_COMMAND_WRITE_LOCK_MAGIC);
// Select PG3
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_FUNCTION);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND, IS31FL3733_COMMAND_FUNCTION);
// Set de-ghost pull-up resistors (SWx)
is31fl3733_write_register(addr, IS31FL3733_REG_SW_PULLUP, IS31FL3733_SW_PULLUP);
is31fl3733_write_register(addr, IS31FL3733_FUNCTION_REG_SW_PULLUP, IS31FL3733_SW_PULLUP);
// Set de-ghost pull-down resistors (CSx)
is31fl3733_write_register(addr, IS31FL3733_REG_CS_PULLDOWN, IS31FL3733_CS_PULLDOWN);
is31fl3733_write_register(addr, IS31FL3733_FUNCTION_REG_CS_PULLDOWN, IS31FL3733_CS_PULLDOWN);
// Set global current to maximum.
is31fl3733_write_register(addr, IS31FL3733_REG_GLOBALCURRENT, IS31FL3733_GLOBALCURRENT);
is31fl3733_write_register(addr, IS31FL3733_FUNCTION_REG_GLOBAL_CURRENT, IS31FL3733_GLOBAL_CURRENT);
// Disable software shutdown.
is31fl3733_write_register(addr, IS31FL3733_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((IS31FL3733_PWM_FREQUENCY & 0b111) << 3) | 0x01);
is31fl3733_write_register(addr, IS31FL3733_FUNCTION_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((IS31FL3733_PWM_FREQUENCY & 0b111) << 3) | 0x01);
// Wait 10ms to ensure the device has woken up.
wait_ms(10);
@ -256,8 +240,8 @@ void is31fl3733_set_led_control_register(uint8_t index, bool value) {
void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// Firstly we need to unlock the command register and select PG1.
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND_WRITE_LOCK, IS31FL3733_COMMAND_WRITE_LOCK_MAGIC);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND, IS31FL3733_COMMAND_PWM);
// If any of the transactions fail we risk writing dirty PG0,
// refresh page 0 just in case.
@ -271,8 +255,8 @@ void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
// Firstly we need to unlock the command register and select PG0
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND_WRITE_LOCK, IS31FL3733_COMMAND_WRITE_LOCK_MAGIC);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND, IS31FL3733_COMMAND_LED_CONTROL);
for (int i = 0; i < IS31FL3733_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3733_write_register(addr, i, g_led_control_registers[index][i]);
}

21
drivers/led/issi/is31fl3733-simple.h
View file

@ -42,7 +42,7 @@
# define IS31FL3733_CS_PULLDOWN ISSI_CSPULLUP
#endif
#ifdef ISSI_GLOBALCURRENT
# define IS31FL3733_GLOBALCURRENT ISSI_GLOBALCURRENT
# define IS31FL3733_GLOBAL_CURRENT ISSI_GLOBALCURRENT
#endif
#define is31_led is31fl3733_led_t
@ -57,6 +57,25 @@
#define PUR_32KR IS31FL3733_PUR_32K_OHM
// ========
#define IS31FL3733_REG_INTERRUPT_MASK 0xF0
#define IS31FL3733_REG_INTERRUPT_STATUS 0xF1
#define IS31FL3733_REG_COMMAND 0xFD
#define IS31FL3733_COMMAND_LED_CONTROL 0x00
#define IS31FL3733_COMMAND_PWM 0x01
#define IS31FL3733_COMMAND_AUTO_BREATH 0x02
#define IS31FL3733_COMMAND_FUNCTION 0x03
#define IS31FL3733_FUNCTION_REG_CONFIGURATION 0x00
#define IS31FL3733_FUNCTION_REG_GLOBAL_CURRENT 0x01
#define IS31FL3733_FUNCTION_REG_SW_PULLUP 0x0F
#define IS31FL3733_FUNCTION_REG_CS_PULLDOWN 0x10
#define IS31FL3733_FUNCTION_REG_RESET 0x11
#define IS31FL3733_REG_COMMAND_WRITE_LOCK 0xFE
#define IS31FL3733_COMMAND_WRITE_LOCK_MAGIC 0xC5
#define IS31FL3733_I2C_ADDRESS_GND_GND 0x50
#define IS31FL3733_I2C_ADDRESS_GND_SCL 0x51
#define IS31FL3733_I2C_ADDRESS_GND_SDA 0x52

48
drivers/led/issi/is31fl3733.c
View file

@ -22,22 +22,6 @@
#include "i2c_master.h"
#include "wait.h"
#define IS31FL3733_COMMANDREGISTER 0xFD
#define IS31FL3733_COMMANDREGISTER_WRITELOCK 0xFE
#define IS31FL3733_INTERRUPTMASKREGISTER 0xF0
#define IS31FL3733_INTERRUPTSTATUSREGISTER 0xF1
#define IS31FL3733_PAGE_LEDCONTROL 0x00 // PG0
#define IS31FL3733_PAGE_PWM 0x01 // PG1
#define IS31FL3733_PAGE_AUTOBREATH 0x02 // PG2
#define IS31FL3733_PAGE_FUNCTION 0x03 // PG3
#define IS31FL3733_REG_CONFIGURATION 0x00 // PG3
#define IS31FL3733_REG_GLOBALCURRENT 0x01 // PG3
#define IS31FL3733_REG_RESET 0x11 // PG3
#define IS31FL3733_REG_SW_PULLUP 0x0F // PG3
#define IS31FL3733_REG_CS_PULLDOWN 0x10 // PG3
#define IS31FL3733_PWM_REGISTER_COUNT 192
#define IS31FL3733_LED_CONTROL_REGISTER_COUNT 24
@ -61,8 +45,8 @@
# define IS31FL3733_CS_PULLDOWN IS31FL3733_PDR_0_OHM
#endif
#ifndef IS31FL3733_GLOBALCURRENT
# define IS31FL3733_GLOBALCURRENT 0xFF
#ifndef IS31FL3733_GLOBAL_CURRENT
# define IS31FL3733_GLOBAL_CURRENT 0xFF
#endif
#ifndef IS31FL3733_SYNC_1
@ -179,20 +163,20 @@ void is31fl3733_init(uint8_t addr, uint8_t sync) {
// Sync is passed so set it according to the datasheet.
// Unlock the command register.
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND_WRITE_LOCK, IS31FL3733_COMMAND_WRITE_LOCK_MAGIC);
// Select PG0
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND, IS31FL3733_COMMAND_LED_CONTROL);
// Turn off all LEDs.
for (int i = 0; i < IS31FL3733_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3733_write_register(addr, i, 0x00);
}
// Unlock the command register.
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND_WRITE_LOCK, IS31FL3733_COMMAND_WRITE_LOCK_MAGIC);
// Select PG1
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND, IS31FL3733_COMMAND_PWM);
// Set PWM on all LEDs to 0
// No need to setup Breath registers to PWM as that is the default.
for (int i = 0; i < IS31FL3733_PWM_REGISTER_COUNT; i++) {
@ -200,18 +184,18 @@ void is31fl3733_init(uint8_t addr, uint8_t sync) {
}
// Unlock the command register.
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND_WRITE_LOCK, IS31FL3733_COMMAND_WRITE_LOCK_MAGIC);
// Select PG3
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_FUNCTION);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND, IS31FL3733_COMMAND_FUNCTION);
// Set de-ghost pull-up resistors (SWx)
is31fl3733_write_register(addr, IS31FL3733_REG_SW_PULLUP, IS31FL3733_SW_PULLUP);
is31fl3733_write_register(addr, IS31FL3733_FUNCTION_REG_SW_PULLUP, IS31FL3733_SW_PULLUP);
// Set de-ghost pull-down resistors (CSx)
is31fl3733_write_register(addr, IS31FL3733_REG_CS_PULLDOWN, IS31FL3733_CS_PULLDOWN);
is31fl3733_write_register(addr, IS31FL3733_FUNCTION_REG_CS_PULLDOWN, IS31FL3733_CS_PULLDOWN);
// Set global current to maximum.
is31fl3733_write_register(addr, IS31FL3733_REG_GLOBALCURRENT, IS31FL3733_GLOBALCURRENT);
is31fl3733_write_register(addr, IS31FL3733_FUNCTION_REG_GLOBAL_CURRENT, IS31FL3733_GLOBAL_CURRENT);
// Disable software shutdown.
is31fl3733_write_register(addr, IS31FL3733_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((IS31FL3733_PWM_FREQUENCY & 0b111) << 3) | 0x01);
is31fl3733_write_register(addr, IS31FL3733_FUNCTION_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((IS31FL3733_PWM_FREQUENCY & 0b111) << 3) | 0x01);
// Wait 10ms to ensure the device has woken up.
wait_ms(10);
@ -271,8 +255,8 @@ void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bo
void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// Firstly we need to unlock the command register and select PG1.
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND_WRITE_LOCK, IS31FL3733_COMMAND_WRITE_LOCK_MAGIC);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND, IS31FL3733_COMMAND_PWM);
// If any of the transactions fail we risk writing dirty PG0,
// refresh page 0 just in case.
@ -286,8 +270,8 @@ void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
// Firstly we need to unlock the command register and select PG0
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND_WRITE_LOCK, IS31FL3733_COMMAND_WRITE_LOCK_MAGIC);
is31fl3733_write_register(addr, IS31FL3733_REG_COMMAND, IS31FL3733_COMMAND_LED_CONTROL);
for (int i = 0; i < IS31FL3733_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3733_write_register(addr, i, g_led_control_registers[index][i]);
}

21
drivers/led/issi/is31fl3733.h
View file

@ -65,7 +65,7 @@
# define IS31FL3733_CS_PULLDOWN ISSI_CSPULLUP
#endif
#ifdef ISSI_GLOBALCURRENT
# define IS31FL3733_GLOBALCURRENT ISSI_GLOBALCURRENT
# define IS31FL3733_GLOBAL_CURRENT ISSI_GLOBALCURRENT
#endif
#define is31_led is31fl3733_led_t
@ -80,6 +80,25 @@
#define PUR_32KR IS31FL3733_PUR_32K_OHM
// ========
#define IS31FL3733_REG_INTERRUPT_MASK 0xF0
#define IS31FL3733_REG_INTERRUPT_STATUS 0xF1
#define IS31FL3733_REG_COMMAND 0xFD
#define IS31FL3733_COMMAND_LED_CONTROL 0x00
#define IS31FL3733_COMMAND_PWM 0x01
#define IS31FL3733_COMMAND_AUTO_BREATH 0x02
#define IS31FL3733_COMMAND_FUNCTION 0x03
#define IS31FL3733_FUNCTION_REG_CONFIGURATION 0x00
#define IS31FL3733_FUNCTION_REG_GLOBAL_CURRENT 0x01
#define IS31FL3733_FUNCTION_REG_SW_PULLUP 0x0F
#define IS31FL3733_FUNCTION_REG_CS_PULLDOWN 0x10
#define IS31FL3733_FUNCTION_REG_RESET 0x11
#define IS31FL3733_REG_COMMAND_WRITE_LOCK 0xFE
#define IS31FL3733_COMMAND_WRITE_LOCK_MAGIC 0xC5
#define IS31FL3733_I2C_ADDRESS_GND_GND 0x50
#define IS31FL3733_I2C_ADDRESS_GND_SCL 0x51
#define IS31FL3733_I2C_ADDRESS_GND_SDA 0x52

48
drivers/led/issi/is31fl3736-simple.c
View file

@ -20,22 +20,6 @@
#include "i2c_master.h"
#include "wait.h"
#define IS31FL3736_COMMANDREGISTER 0xFD
#define IS31FL3736_COMMANDREGISTER_WRITELOCK 0xFE
#define IS31FL3736_INTERRUPTMASKREGISTER 0xF0
#define IS31FL3736_INTERRUPTSTATUSREGISTER 0xF1
#define IS31FL3736_PAGE_LEDCONTROL 0x00 // PG0
#define IS31FL3736_PAGE_PWM 0x01 // PG1
#define IS31FL3736_PAGE_AUTOBREATH 0x02 // PG2
#define IS31FL3736_PAGE_FUNCTION 0x03 // PG3
#define IS31FL3736_REG_CONFIGURATION 0x00 // PG3
#define IS31FL3736_REG_GLOBALCURRENT 0x01 // PG3
#define IS31FL3736_REG_RESET 0x11 // PG3
#define IS31FL3736_REG_SW_PULLUP 0x0F // PG3
#define IS31FL3736_REG_CS_PULLDOWN 0x10 // PG3
#define IS31FL3736_PWM_REGISTER_COUNT 192 // actually 96
#define IS31FL3736_LED_CONTROL_REGISTER_COUNT 24
@ -59,8 +43,8 @@
# define IS31FL3736_CS_PULLDOWN IS31FL3736_PDR_0_OHM
#endif
#ifndef IS31FL3736_GLOBALCURRENT
# define IS31FL3736_GLOBALCURRENT 0xFF
#ifndef IS31FL3736_GLOBAL_CURRENT
# define IS31FL3736_GLOBAL_CURRENT 0xFF
#endif
// Transfer buffer for TWITransmitData()
@ -152,20 +136,20 @@ void is31fl3736_init(uint8_t addr) {
// then disable software shutdown.
// Unlock the command register.
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND_WRITE_LOCK, IS31FL3736_COMMAND_WRITE_LOCK_MAGIC);
// Select PG0
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_LEDCONTROL);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND, IS31FL3736_COMMAND_LED_CONTROL);
// Turn off all LEDs.
for (int i = 0; i < IS31FL3736_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3736_write_register(addr, i, 0x00);
}
// Unlock the command register.
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND_WRITE_LOCK, IS31FL3736_COMMAND_WRITE_LOCK_MAGIC);
// Select PG1
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_PWM);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND, IS31FL3736_COMMAND_PWM);
// Set PWM on all LEDs to 0
// No need to setup Breath registers to PWM as that is the default.
for (int i = 0; i < IS31FL3736_PWM_REGISTER_COUNT; i++) {
@ -173,18 +157,18 @@ void is31fl3736_init(uint8_t addr) {
}
// Unlock the command register.
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND_WRITE_LOCK, IS31FL3736_COMMAND_WRITE_LOCK_MAGIC);
// Select PG3
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_FUNCTION);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND, IS31FL3736_COMMAND_FUNCTION);
// Set de-ghost pull-up resistors (SWx)
is31fl3736_write_register(addr, IS31FL3736_REG_SW_PULLUP, IS31FL3736_SW_PULLUP);
is31fl3736_write_register(addr, IS31FL3736_FUNCTION_REG_SW_PULLUP, IS31FL3736_SW_PULLUP);
// Set de-ghost pull-down resistors (CSx)
is31fl3736_write_register(addr, IS31FL3736_REG_CS_PULLDOWN, IS31FL3736_CS_PULLDOWN);
is31fl3736_write_register(addr, IS31FL3736_FUNCTION_REG_CS_PULLDOWN, IS31FL3736_CS_PULLDOWN);
// Set global current to maximum.
is31fl3736_write_register(addr, IS31FL3736_REG_GLOBALCURRENT, IS31FL3736_GLOBALCURRENT);
is31fl3736_write_register(addr, IS31FL3736_FUNCTION_REG_GLOBAL_CURRENT, IS31FL3736_GLOBAL_CURRENT);
// Disable software shutdown.
is31fl3736_write_register(addr, IS31FL3736_REG_CONFIGURATION, ((IS31FL3736_PWM_FREQUENCY & 0b111) << 3) | 0x01);
is31fl3736_write_register(addr, IS31FL3736_FUNCTION_REG_CONFIGURATION, ((IS31FL3736_PWM_FREQUENCY & 0b111) << 3) | 0x01);
// Wait 10ms to ensure the device has woken up.
wait_ms(10);
@ -234,8 +218,8 @@ void is31fl3736_set_led_control_register(uint8_t index, bool value) {
void is31fl3736_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// Firstly we need to unlock the command register and select PG1
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_PWM);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND_WRITE_LOCK, IS31FL3736_COMMAND_WRITE_LOCK_MAGIC);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND, IS31FL3736_COMMAND_PWM);
is31fl3736_write_pwm_buffer(addr, g_pwm_buffer[index]);
g_pwm_buffer_update_required[index] = false;
@ -245,8 +229,8 @@ void is31fl3736_update_pwm_buffers(uint8_t addr, uint8_t index) {
void is31fl3736_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
// Firstly we need to unlock the command register and select PG0
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_LEDCONTROL);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND_WRITE_LOCK, IS31FL3736_COMMAND_WRITE_LOCK_MAGIC);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND, IS31FL3736_COMMAND_LED_CONTROL);
for (int i = 0; i < IS31FL3736_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3736_write_register(addr, i, g_led_control_registers[index][i]);
}

21
drivers/led/issi/is31fl3736-simple.h
View file

@ -36,7 +36,7 @@
# define IS31FL3736_CS_PULLDOWN ISSI_CSPULLUP
#endif
#ifdef ISSI_GLOBALCURRENT
# define IS31FL3736_GLOBALCURRENT ISSI_GLOBALCURRENT
# define IS31FL3736_GLOBAL_CURRENT ISSI_GLOBALCURRENT
#endif
#define is31_led is31fl3736_led_t
@ -52,6 +52,25 @@
#define PUR_32KR IS31FL3736_PUR_32K_OHM
// ========
#define IS31FL3736_REG_INTERRUPT_MASK 0xF0
#define IS31FL3736_REG_INTERRUPT_STATUS 0xF1
#define IS31FL3736_REG_COMMAND 0xFD
#define IS31FL3736_COMMAND_LED_CONTROL 0x00
#define IS31FL3736_COMMAND_PWM 0x01
#define IS31FL3736_COMMAND_AUTO_BREATH 0x02
#define IS31FL3736_COMMAND_FUNCTION 0x03
#define IS31FL3736_FUNCTION_REG_CONFIGURATION 0x00
#define IS31FL3736_FUNCTION_REG_GLOBAL_CURRENT 0x01
#define IS31FL3736_FUNCTION_REG_SW_PULLUP 0x0F
#define IS31FL3736_FUNCTION_REG_CS_PULLDOWN 0x10
#define IS31FL3736_FUNCTION_REG_RESET 0x11
#define IS31FL3736_REG_COMMAND_WRITE_LOCK 0xFE
#define IS31FL3736_COMMAND_WRITE_LOCK_MAGIC 0xC5
#define IS31FL3736_I2C_ADDRESS_GND_GND 0x50
#define IS31FL3736_I2C_ADDRESS_GND_SCL 0x51
#define IS31FL3736_I2C_ADDRESS_GND_SDA 0x52

48
drivers/led/issi/is31fl3736.c
View file

@ -20,22 +20,6 @@
#include "i2c_master.h"
#include "wait.h"
#define IS31FL3736_COMMANDREGISTER 0xFD
#define IS31FL3736_COMMANDREGISTER_WRITELOCK 0xFE
#define IS31FL3736_INTERRUPTMASKREGISTER 0xF0
#define IS31FL3736_INTERRUPTSTATUSREGISTER 0xF1
#define IS31FL3736_PAGE_LEDCONTROL 0x00 // PG0
#define IS31FL3736_PAGE_PWM 0x01 // PG1
#define IS31FL3736_PAGE_AUTOBREATH 0x02 // PG2
#define IS31FL3736_PAGE_FUNCTION 0x03 // PG3
#define IS31FL3736_REG_CONFIGURATION 0x00 // PG3
#define IS31FL3736_REG_GLOBALCURRENT 0x01 // PG3
#define IS31FL3736_REG_RESET 0x11 // PG3
#define IS31FL3736_REG_SW_PULLUP 0x0F // PG3
#define IS31FL3736_REG_CS_PULLDOWN 0x10 // PG3
#define IS31FL3736_PWM_REGISTER_COUNT 192 // actually 96
#define IS31FL3736_LED_CONTROL_REGISTER_COUNT 24
@ -59,8 +43,8 @@
# define IS31FL3736_CS_PULLDOWN IS31FL3736_PDR_0_OHM
#endif
#ifndef IS31FL3736_GLOBALCURRENT
# define IS31FL3736_GLOBALCURRENT 0xFF
#ifndef IS31FL3736_GLOBAL_CURRENT
# define IS31FL3736_GLOBAL_CURRENT 0xFF
#endif
// Transfer buffer for TWITransmitData()
@ -152,20 +136,20 @@ void is31fl3736_init(uint8_t addr) {
// then disable software shutdown.
// Unlock the command register.
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND_WRITE_LOCK, IS31FL3736_COMMAND_WRITE_LOCK_MAGIC);
// Select PG0
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_LEDCONTROL);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND, IS31FL3736_REG_LED_CONTROL);
// Turn off all LEDs.
for (int i = 0; i < IS31FL3736_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3736_write_register(addr, i, 0x00);
}
// Unlock the command register.
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND_WRITELOCK, IS31FL3736_COMMAND_WRITE_LOCK_MAGIC);
// Select PG1
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_PWM);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND, IS31FL3736_COMMAND_PWM);
// Set PWM on all LEDs to 0
// No need to setup Breath registers to PWM as that is the default.
for (int i = 0; i < IS31FL3736_PWM_REGISTER_COUNT; i++) {
@ -173,18 +157,18 @@ void is31fl3736_init(uint8_t addr) {
}
// Unlock the command register.
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND_WRITE_LOCK, IS31FL3736_COMMAND_WRITE_LOCK_MAGIC);
// Select PG3
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_FUNCTION);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND, IS31FL3736_COMMAND_FUNCTION);
// Set de-ghost pull-up resistors (SWx)
is31fl3736_write_register(addr, IS31FL3736_REG_SW_PULLUP, IS31FL3736_SW_PULLUP);
is31fl3736_write_register(addr, IS31FL3736_FUNCTION_REG_SW_PULLUP, IS31FL3736_SW_PULLUP);
// Set de-ghost pull-down resistors (CSx)
is31fl3736_write_register(addr, IS31FL3736_REG_CS_PULLDOWN, IS31FL3736_CS_PULLDOWN);
is31fl3736_write_register(addr, IS31FL3736_FUNCTION_REG_CS_PULLDOWN, IS31FL3736_CS_PULLDOWN);
// Set global current to maximum.
is31fl3736_write_register(addr, IS31FL3736_REG_GLOBALCURRENT, IS31FL3736_GLOBALCURRENT);
is31fl3736_write_register(addr, IS31FL3736_FUNCTION_REG_GLOBAL_CURRENT, IS31FL3736_GLOBAL_CURRENT);
// Disable software shutdown.
is31fl3736_write_register(addr, IS31FL3736_REG_CONFIGURATION, ((IS31FL3736_PWM_FREQUENCY & 0b111) << 3) | 0x01);
is31fl3736_write_register(addr, IS31FL3736_FUNCTION_REG_CONFIGURATION, ((IS31FL3736_PWM_FREQUENCY & 0b111) << 3) | 0x01);
// Wait 10ms to ensure the device has woken up.
wait_ms(10);
@ -251,8 +235,8 @@ void is31fl3736_set_led_control_register(uint8_t index, bool red, bool green, bo
void is31fl3736_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// Firstly we need to unlock the command register and select PG1
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_PWM);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND_WRITE_LOCK, IS31FL3736_COMMAND_WRITE_LOCK_MAGIC);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND, IS31FL3736_COMMAND_PWM);
is31fl3736_write_pwm_buffer(addr, g_pwm_buffer[index]);
g_pwm_buffer_update_required[index] = false;
@ -262,8 +246,8 @@ void is31fl3736_update_pwm_buffers(uint8_t addr, uint8_t index) {
void is31fl3736_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
// Firstly we need to unlock the command register and select PG0
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3736_write_register(addr, IS31FL3736_COMMANDREGISTER, IS31FL3736_PAGE_LEDCONTROL);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND_WRITE_LOCK, IS31FL3736_COMMAND_WRITE_LOCK_MAGIC);
is31fl3736_write_register(addr, IS31FL3736_REG_COMMAND, IS31FL3736_COMMAND_LED_CONTROL);
for (int i = 0; i < IS31FL3736_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3736_write_register(addr, i, g_led_control_registers[index][i]);
}

21
drivers/led/issi/is31fl3736.h
View file

@ -48,7 +48,7 @@
# define IS31FL3736_CS_PULLDOWN ISSI_CSPULLUP
#endif
#ifdef ISSI_GLOBALCURRENT
# define IS31FL3736_GLOBALCURRENT ISSI_GLOBALCURRENT
# define IS31FL3736_GLOBAL_CURRENT ISSI_GLOBALCURRENT
#endif
#define is31_led is31fl3736_led_t
@ -64,6 +64,25 @@
#define PUR_32KR IS31FL3736_PUR_32K_OHM
// ========
#define IS31FL3736_REG_INTERRUPT_MASK 0xF0
#define IS31FL3736_REG_INTERRUPT_STATUS 0xF1
#define IS31FL3736_REG_COMMAND 0xFD
#define IS31FL3736_COMMAND_LED_CONTROL 0x00
#define IS31FL3736_COMMAND_PWM 0x01
#define IS31FL3736_COMMAND_AUTO_BREATH 0x02
#define IS31FL3736_COMMAND_FUNCTION 0x03
#define IS31FL3736_FUNCTION_REG_CONFIGURATION 0x00
#define IS31FL3736_FUNCTION_REG_GLOBAL_CURRENT 0x01
#define IS31FL3736_FUNCTION_REG_SW_PULLUP 0x0F
#define IS31FL3736_FUNCTION_REG_CS_PULLDOWN 0x10
#define IS31FL3736_FUNCTION_REG_RESET 0x11
#define IS31FL3736_REG_COMMAND_WRITE_LOCK 0xFE
#define IS31FL3736_COMMAND_WRITE_LOCK_MAGIC 0xC5
#define IS31FL3736_I2C_ADDRESS_GND_GND 0x50
#define IS31FL3736_I2C_ADDRESS_GND_SCL 0x51
#define IS31FL3736_I2C_ADDRESS_GND_SDA 0x52

48
drivers/led/issi/is31fl3737-simple.c
View file

@ -22,22 +22,6 @@
#include "i2c_master.h"
#include "wait.h"
#define IS31FL3737_COMMANDREGISTER 0xFD
#define IS31FL3737_COMMANDREGISTER_WRITELOCK 0xFE
#define IS31FL3737_INTERRUPTMASKREGISTER 0xF0
#define IS31FL3737_INTERRUPTSTATUSREGISTER 0xF1
#define IS31FL3737_PAGE_LEDCONTROL 0x00 // PG0
#define IS31FL3737_PAGE_PWM 0x01 // PG1
#define IS31FL3737_PAGE_AUTOBREATH 0x02 // PG2
#define IS31FL3737_PAGE_FUNCTION 0x03 // PG3
#define IS31FL3737_REG_CONFIGURATION 0x00 // PG3
#define IS31FL3737_REG_GLOBALCURRENT 0x01 // PG3
#define IS31FL3737_REG_RESET 0x11 // PG3
#define IS31FL3737_REG_SW_PULLUP 0x0F // PG3
#define IS31FL3737_REG_CS_PULLDOWN 0x10 // PG3
#define IS31FL3737_PWM_REGISTER_COUNT 192 // actually 144
#define IS31FL3737_LED_CONTROL_REGISTER_COUNT 24
@ -61,8 +45,8 @@
# define IS31FL3737_CS_PULLDOWN IS31FL3737_PDR_0_OHM
#endif
#ifndef IS31FL3737_GLOBALCURRENT
# define IS31FL3737_GLOBALCURRENT 0xFF
#ifndef IS31FL3737_GLOBAL_CURRENT
# define IS31FL3737_GLOBAL_CURRENT 0xFF
#endif
// Transfer buffer for TWITransmitData()
@ -155,20 +139,20 @@ void is31fl3737_init(uint8_t addr) {
// then disable software shutdown.
// Unlock the command register.
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND_WRITE_LOCK, IS31FL3737_COMMAND_WRITE_LOCK_MAGIC);
// Select PG0
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_LEDCONTROL);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND, IS31FL3737_COMMAND_LED_CONTROL);
// Turn off all LEDs.
for (int i = 0; i < IS31FL3737_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3737_write_register(addr, i, 0x00);
}
// Unlock the command register.
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND_WRITE_LOCK, IS31FL3737_COMMAND_WRITE_LOCK_MAGIC);
// Select PG1
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_PWM);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND, IS31FL3737_COMMAND_PWM);
// Set PWM on all LEDs to 0
// No need to setup Breath registers to PWM as that is the default.
for (int i = 0; i < IS31FL3737_PWM_REGISTER_COUNT; i++) {
@ -176,18 +160,18 @@ void is31fl3737_init(uint8_t addr) {
}
// Unlock the command register.
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND_WRITE_LOCK, IS31FL3737_COMMAND_WRITE_LOCK_MAGIC);
// Select PG3
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_FUNCTION);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND, IS31FL3737_COMMAND_FUNCTION);
// Set de-ghost pull-up resistors (SWx)
is31fl3737_write_register(addr, IS31FL3737_REG_SW_PULLUP, IS31FL3737_SW_PULLUP);
is31fl3737_write_register(addr, IS31FL3737_FUNCTION_REG_SW_PULLUP, IS31FL3737_SW_PULLUP);
// Set de-ghost pull-down resistors (CSx)
is31fl3737_write_register(addr, IS31FL3737_REG_CS_PULLDOWN, IS31FL3737_CS_PULLDOWN);
is31fl3737_write_register(addr, IS31FL3737_FUNCTION_REG_CS_PULLDOWN, IS31FL3737_CS_PULLDOWN);
// Set global current to maximum.
is31fl3737_write_register(addr, IS31FL3737_REG_GLOBALCURRENT, IS31FL3737_GLOBALCURRENT);
is31fl3737_write_register(addr, IS31FL3737_FUNCTION_REG_GLOBAL_CURRENT, IS31FL3737_GLOBAL_CURRENT);
// Disable software shutdown.
is31fl3737_write_register(addr, IS31FL3737_REG_CONFIGURATION, ((IS31FL3737_PWM_FREQUENCY & 0b111) << 3) | 0x01);
is31fl3737_write_register(addr, IS31FL3737_FUNCTION_REG_CONFIGURATION, ((IS31FL3737_PWM_FREQUENCY & 0b111) << 3) | 0x01);
// Wait 10ms to ensure the device has woken up.
wait_ms(10);
@ -231,8 +215,8 @@ void is31fl3737_set_led_control_register(uint8_t index, bool value) {
void is31fl3737_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// Firstly we need to unlock the command register and select PG1
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_PWM);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND_WRITE_LOCK, IS31FL3737_COMMAND_WRITE_LOCK_MAGIC);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND, IS31FL3737_COMMAND_PWM);
is31fl3737_write_pwm_buffer(addr, g_pwm_buffer[index]);
g_pwm_buffer_update_required[index] = false;
@ -242,8 +226,8 @@ void is31fl3737_update_pwm_buffers(uint8_t addr, uint8_t index) {
void is31fl3737_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
// Firstly we need to unlock the command register and select PG0
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_LEDCONTROL);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND_WRITE_LOCK, IS31FL3737_COMMAND_WRITE_LOCK_MAGIC);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND, IS31FL3737_COMMAND_LED_CONTROL);
for (int i = 0; i < IS31FL3737_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3737_write_register(addr, i, g_led_control_registers[index][i]);
}

21
drivers/led/issi/is31fl3737-simple.h
View file

@ -41,7 +41,7 @@
# define IS31FL3737_CS_PULLDOWN ISSI_CSPULLUP
#endif
#ifdef ISSI_GLOBALCURRENT
# define IS31FL3737_GLOBALCURRENT ISSI_GLOBALCURRENT
# define IS31FL3737_GLOBAL_CURRENT ISSI_GLOBALCURRENT
#endif
#define PUR_0R IS31FL3737_PUR_0_OHM
@ -54,6 +54,25 @@
#define PUR_32KR IS31FL3737_PUR_32K_OHM
// ========
#define IS31FL3737_REG_INTERRUPT_MASK 0xF0
#define IS31FL3737_REG_INTERRUPT_STATUS 0xF1
#define IS31FL3737_REG_COMMAND 0xFD
#define IS31FL3737_COMMAND_LED_CONTROL 0x00
#define IS31FL3737_COMMAND_PWM 0x01
#define IS31FL3737_COMMAND_AUTO_BREATH 0x02
#define IS31FL3737_COMMAND_FUNCTION 0x03
#define IS31FL3737_FUNCTION_REG_CONFIGURATION 0x00
#define IS31FL3737_FUNCTION_REG_GLOBAL_CURRENT 0x01
#define IS31FL3737_FUNCTION_REG_SW_PULLUP 0x0F
#define IS31FL3737_FUNCTION_REG_CS_PULLDOWN 0x10
#define IS31FL3737_FUNCTION_REG_RESET 0x11
#define IS31FL3737_REG_COMMAND_WRITE_LOCK 0xFE
#define IS31FL3737_COMMAND_WRITE_LOCK_MAGIC 0xC5
#define IS31FL3737_I2C_ADDRESS_GND 0x50
#define IS31FL3737_I2C_ADDRESS_SCL 0x55
#define IS31FL3737_I2C_ADDRESS_SDA 0x5A

48
drivers/led/issi/is31fl3737.c
View file

@ -22,22 +22,6 @@
#include "i2c_master.h"
#include "wait.h"
#define IS31FL3737_COMMANDREGISTER 0xFD
#define IS31FL3737_COMMANDREGISTER_WRITELOCK 0xFE
#define IS31FL3737_INTERRUPTMASKREGISTER 0xF0
#define IS31FL3737_INTERRUPTSTATUSREGISTER 0xF1
#define IS31FL3737_PAGE_LEDCONTROL 0x00 // PG0
#define IS31FL3737_PAGE_PWM 0x01 // PG1
#define IS31FL3737_PAGE_AUTOBREATH 0x02 // PG2
#define IS31FL3737_PAGE_FUNCTION 0x03 // PG3
#define IS31FL3737_REG_CONFIGURATION 0x00 // PG3
#define IS31FL3737_REG_GLOBALCURRENT 0x01 // PG3
#define IS31FL3737_REG_RESET 0x11 // PG3
#define IS31FL3737_REG_SW_PULLUP 0x0F // PG3
#define IS31FL3737_REG_CS_PULLDOWN 0x10 // PG3
#define IS31FL3737_PWM_REGISTER_COUNT 192 // actually 144
#define IS31FL3737_LED_CONTROL_REGISTER_COUNT 24
@ -61,8 +45,8 @@
# define IS31FL3737_CS_PULLDOWN IS31FL3737_PDR_0_OHM
#endif
#ifndef IS31FL3737_GLOBALCURRENT
# define IS31FL3737_GLOBALCURRENT 0xFF
#ifndef IS31FL3737_GLOBAL_CURRENT
# define IS31FL3737_GLOBAL_CURRENT 0xFF
#endif
// Transfer buffer for TWITransmitData()
@ -155,20 +139,20 @@ void is31fl3737_init(uint8_t addr) {
// then disable software shutdown.
// Unlock the command register.
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND_WRITE_LOCK, IS31FL3737_COMMAND_WRITE_LOCK_MAGIC);
// Select PG0
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_LEDCONTROL);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND, IS31FL3737_COMMAND_LED_CONTROL);
// Turn off all LEDs.
for (int i = 0; i < IS31FL3737_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3737_write_register(addr, i, 0x00);
}
// Unlock the command register.
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND_WRITE_LOCK, IS31FL3737_COMMAND_WRITE_LOCK_MAGIC);
// Select PG1
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_PWM);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND, IS31FL3737_COMMAND_PWM);
// Set PWM on all LEDs to 0
// No need to setup Breath registers to PWM as that is the default.
for (int i = 0; i < IS31FL3737_PWM_REGISTER_COUNT; i++) {
@ -176,18 +160,18 @@ void is31fl3737_init(uint8_t addr) {
}
// Unlock the command register.
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND_WRITE_LOCK, IS31FL3737_COMMAND_WRITE_LOCK_MAGIC);
// Select PG3
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_FUNCTION);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND, IS31FL3737_COMMAND_FUNCTION);
// Set de-ghost pull-up resistors (SWx)
is31fl3737_write_register(addr, IS31FL3737_REG_SW_PULLUP, IS31FL3737_SW_PULLUP);
is31fl3737_write_register(addr, IS31FL3737_FUNCTION_REG_SW_PULLUP, IS31FL3737_SW_PULLUP);
// Set de-ghost pull-down resistors (CSx)
is31fl3737_write_register(addr, IS31FL3737_REG_CS_PULLDOWN, IS31FL3737_CS_PULLDOWN);
is31fl3737_write_register(addr, IS31FL3737_FUNCTION_REG_CS_PULLDOWN, IS31FL3737_CS_PULLDOWN);
// Set global current to maximum.
is31fl3737_write_register(addr, IS31FL3737_REG_GLOBALCURRENT, IS31FL3737_GLOBALCURRENT);
is31fl3737_write_register(addr, IS31FL3737_FUNCTION_REG_GLOBAL_CURRENT, IS31FL3737_GLOBAL_CURRENT);
// Disable software shutdown.
is31fl3737_write_register(addr, IS31FL3737_REG_CONFIGURATION, ((IS31FL3737_PWM_FREQUENCY & 0b111) << 3) | 0x01);
is31fl3737_write_register(addr, IS31FL3737_FUNCTION_REG_CONFIGURATION, ((IS31FL3737_PWM_FREQUENCY & 0b111) << 3) | 0x01);
// Wait 10ms to ensure the device has woken up.
wait_ms(10);
@ -247,8 +231,8 @@ void is31fl3737_set_led_control_register(uint8_t index, bool red, bool green, bo
void is31fl3737_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// Firstly we need to unlock the command register and select PG1
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_PWM);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND_WRITE_LOCK, IS31FL3737_COMMAND_WRITE_LOCK_MAGIC);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND, IS31FL3737_COMMAND_PWM);
is31fl3737_write_pwm_buffer(addr, g_pwm_buffer[index]);
g_pwm_buffer_update_required[index] = false;
@ -258,8 +242,8 @@ void is31fl3737_update_pwm_buffers(uint8_t addr, uint8_t index) {
void is31fl3737_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
// Firstly we need to unlock the command register and select PG0
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3737_write_register(addr, IS31FL3737_COMMANDREGISTER, IS31FL3737_PAGE_LEDCONTROL);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND_WRITE_LOCK, IS31FL3737_COMMAND_WRITE_LOCK_MAGIC);
is31fl3737_write_register(addr, IS31FL3737_REG_COMMAND, IS31FL3737_COMMAND_LED_CONTROL);
for (int i = 0; i < IS31FL3737_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3737_write_register(addr, i, g_led_control_registers[index][i]);
}

21
drivers/led/issi/is31fl3737.h
View file

@ -53,7 +53,7 @@
# define IS31FL3737_CS_PULLDOWN ISSI_CSPULLUP
#endif
#ifdef ISSI_GLOBALCURRENT
# define IS31FL3737_GLOBALCURRENT ISSI_GLOBALCURRENT
# define IS31FL3737_GLOBAL_CURRENT ISSI_GLOBALCURRENT
#endif
#define is31_led is31fl3737_led_t
@ -69,6 +69,25 @@
#define PUR_32KR IS31FL3737_PUR_32K_OHM
// ========
#define IS31FL3737_REG_INTERRUPT_MASK 0xF0
#define IS31FL3737_REG_INTERRUPT_STATUS 0xF1
#define IS31FL3737_REG_COMMAND 0xFD
#define IS31FL3737_COMMAND_LED_CONTROL 0x00
#define IS31FL3737_COMMAND_PWM 0x01
#define IS31FL3737_COMMAND_AUTO_BREATH 0x02
#define IS31FL3737_COMMAND_FUNCTION 0x03
#define IS31FL3737_FUNCTION_REG_CONFIGURATION 0x00
#define IS31FL3737_FUNCTION_REG_GLOBAL_CURRENT 0x01
#define IS31FL3737_FUNCTION_REG_SW_PULLUP 0x0F
#define IS31FL3737_FUNCTION_REG_CS_PULLDOWN 0x10
#define IS31FL3737_FUNCTION_REG_RESET 0x11
#define IS31FL3737_REG_COMMAND_WRITE_LOCK 0xFE
#define IS31FL3737_COMMAND_WRITE_LOCK_MAGIC 0xC5
#define IS31FL3737_I2C_ADDRESS_GND 0x50
#define IS31FL3737_I2C_ADDRESS_SCL 0x55
#define IS31FL3737_I2C_ADDRESS_SDA 0x5A

50
drivers/led/issi/is31fl3741-simple.c
View file

@ -22,24 +22,6 @@
#include "i2c_master.h"
#include "wait.h"
#define IS31FL3741_COMMANDREGISTER 0xFD
#define IS31FL3741_COMMANDREGISTER_WRITELOCK 0xFE
#define IS31FL3741_INTERRUPTMASKREGISTER 0xF0
#define IS31FL3741_INTERRUPTSTATUSREGISTER 0xF1
#define IS31FL3741_IDREGISTER 0xFC
#define IS31FL3741_PAGE_PWM0 0x00 // PG0
#define IS31FL3741_PAGE_PWM1 0x01 // PG1
#define IS31FL3741_PAGE_SCALING_0 0x02 // PG2
#define IS31FL3741_PAGE_SCALING_1 0x03 // PG3
#define IS31FL3741_PAGE_FUNCTION 0x04 // PG4
#define IS31FL3741_REG_CONFIGURATION 0x00 // PG4
#define IS31FL3741_REG_GLOBALCURRENT 0x01 // PG4
#define IS31FL3741_REG_PULLDOWNUP 0x02 // PG4
#define IS31FL3741_REG_PWM_FREQUENCY 0x36 // PG4
#define IS31FL3741_REG_RESET 0x3F // PG4
#define IS31FL3741_PWM_REGISTER_COUNT 351
#ifndef IS31FL3741_I2C_TIMEOUT
@ -66,8 +48,8 @@
# define IS31FL3741_CS_PULLDOWN IS31FL3741_PDR_32K_OHM
#endif
#ifndef IS31FL3741_GLOBALCURRENT
# define IS31FL3741_GLOBALCURRENT 0xFF
#ifndef IS31FL3741_GLOBAL_CURRENT
# define IS31FL3741_GLOBAL_CURRENT 0xFF
#endif
// Transfer buffer for TWITransmitData()
@ -104,8 +86,8 @@ bool is31fl3741_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
for (int i = 0; i < 342; i += 18) {
if (i == 180) {
// unlock the command register and select PG1
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_PWM1);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND_WRITE_LOCK, IS31FL3741_COMMAND_WRITE_LOCK_MAGIC);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND, IS31FL3741_COMMAND_PWM_1);
}
g_twi_transfer_buffer[0] = i % 180;
@ -181,20 +163,20 @@ void is31fl3741_init(uint8_t addr) {
// Unlock the command register.
// Unlock the command register.
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND_WRITE_LOCK, IS31FL3741_COMMAND_WRITE_LOCK_MAGIC);
// Select PG4
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_FUNCTION);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND, IS31FL3741_COMMAND_FUNCTION);
// Set to Normal operation
is31fl3741_write_register(addr, IS31FL3741_REG_CONFIGURATION, IS31FL3741_CONFIGURATION);
is31fl3741_write_register(addr, IS31FL3741_FUNCTION_REG_CONFIGURATION, IS31FL3741_CONFIGURATION);
// Set Golbal Current Control Register
is31fl3741_write_register(addr, IS31FL3741_REG_GLOBALCURRENT, IS31FL3741_GLOBALCURRENT);
is31fl3741_write_register(addr, IS31FL3741_FUNCTION_REG_GLOBAL_CURRENT, IS31FL3741_GLOBAL_CURRENT);
// Set Pull up & Down for SWx CSy
is31fl3741_write_register(addr, IS31FL3741_REG_PULLDOWNUP, ((IS31FL3741_CS_PULLDOWN << 4) | IS31FL3741_SW_PULLUP));
is31fl3741_write_register(addr, IS31FL3741_FUNCTION_REG_PULLDOWNUP, ((IS31FL3741_CS_PULLDOWN << 4) | IS31FL3741_SW_PULLUP));
// Set PWM frequency
is31fl3741_write_register(addr, IS31FL3741_REG_PWM_FREQUENCY, (IS31FL3741_PWM_FREQUENCY & 0b1111));
is31fl3741_write_register(addr, IS31FL3741_FUNCTION_REG_PWM_FREQUENCY, (IS31FL3741_PWM_FREQUENCY & 0b1111));
// is31fl3741_update_led_scaling_registers(addr, 0xFF, 0xFF, 0xFF);
@ -237,8 +219,8 @@ void is31fl3741_set_led_control_register(uint8_t index, bool value) {
void is31fl3741_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// unlock the command register and select PG2
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_PWM0);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND_WRITE_LOCK, IS31FL3741_COMMAND_WRITE_LOCK_MAGIC);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND, IS31FL3741_COMMAND_PWM_0);
is31fl3741_write_pwm_buffer(addr, g_pwm_buffer[index]);
}
@ -255,8 +237,8 @@ void is31fl3741_set_pwm_buffer(const is31fl3741_led_t *pled, uint8_t value) {
void is31fl3741_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_scaling_registers_update_required[index]) {
// unlock the command register and select PG2
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_SCALING_0);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND_WRITE_LOCK, IS31FL3741_COMMAND_WRITE_LOCK_MAGIC);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND, IS31FL3741_COMMAND_SCALING_0);
// CS1_SW1 to CS30_SW6 are on PG2
for (int i = CS1_SW1; i <= CS30_SW6; ++i) {
@ -264,8 +246,8 @@ void is31fl3741_update_led_control_registers(uint8_t addr, uint8_t index) {
}
// unlock the command register and select PG3
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_SCALING_1);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND_WRITE_LOCK, IS31FL3741_COMMAND_WRITE_LOCK_MAGIC);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND, IS31FL3741_COMMAND_SCALING_1);
// CS1_SW7 to CS39_SW9 are on PG3
for (int i = CS1_SW7; i <= CS39_SW9; ++i) {

23
drivers/led/issi/is31fl3741-simple.h
View file

@ -41,7 +41,7 @@
# define IS31FL3741_CS_PULLDOWN ISSI_CSPULLUP
#endif
#ifdef ISSI_GLOBALCURRENT
# define IS31FL3741_GLOBALCURRENT ISSI_GLOBALCURRENT
# define IS31FL3741_GLOBAL_CURRENT ISSI_GLOBALCURRENT
#endif
#define PUR_0R IS31FL3741_PUR_0_OHM
@ -54,6 +54,27 @@
#define PUR_32KR IS31FL3741_PUR_32K_OHM
// ========
#define IS31FL3741_REG_INTERRUPT_MASK 0xF0
#define IS31FL3741_REG_INTERRUPT_STATUS 0xF1
#define IS31FL3741_REG_ID 0xFC
#define IS31FL3741_REG_COMMAND 0xFD
#define IS31FL3741_COMMAND_PWM_0 0x00
#define IS31FL3741_COMMAND_PWM_1 0x01
#define IS31FL3741_COMMAND_SCALING_0 0x02
#define IS31FL3741_COMMAND_SCALING_1 0x03
#define IS31FL3741_COMMAND_FUNCTION 0x04
#define IS31FL3741_FUNCTION_REG_CONFIGURATION 0x00
#define IS31FL3741_FUNCTION_REG_GLOBAL_CURRENT 0x01
#define IS31FL3741_FUNCTION_REG_PULLDOWNUP 0x02
#define IS31FL3741_FUNCTION_REG_PWM_FREQUENCY 0x36
#define IS31FL3741_FUNCTION_REG_RESET 0x3F
#define IS31FL3741_REG_COMMAND_WRITE_LOCK 0xFE
#define IS31FL3741_COMMAND_WRITE_LOCK_MAGIC 0xC5
#define IS31FL3741_I2C_ADDRESS_GND 0x30
#define IS31FL3741_I2C_ADDRESS_SCL 0x31
#define IS31FL3741_I2C_ADDRESS_SDA 0x32

50
drivers/led/issi/is31fl3741.c
View file

@ -22,24 +22,6 @@
#include "i2c_master.h"
#include "wait.h"
#define IS31FL3741_COMMANDREGISTER 0xFD
#define IS31FL3741_COMMANDREGISTER_WRITELOCK 0xFE
#define IS31FL3741_INTERRUPTMASKREGISTER 0xF0
#define IS31FL3741_INTERRUPTSTATUSREGISTER 0xF1
#define IS31FL3741_IDREGISTER 0xFC
#define IS31FL3741_PAGE_PWM0 0x00 // PG0
#define IS31FL3741_PAGE_PWM1 0x01 // PG1
#define IS31FL3741_PAGE_SCALING_0 0x02 // PG2
#define IS31FL3741_PAGE_SCALING_1 0x03 // PG3
#define IS31FL3741_PAGE_FUNCTION 0x04 // PG4
#define IS31FL3741_REG_CONFIGURATION 0x00 // PG4
#define IS31FL3741_REG_GLOBALCURRENT 0x01 // PG4
#define IS31FL3741_REG_PULLDOWNUP 0x02 // PG4
#define IS31FL3741_REG_PWM_FREQUENCY 0x36 // PG4
#define IS31FL3741_REG_RESET 0x3F // PG4
#define IS31FL3741_PWM_REGISTER_COUNT 351
#ifndef IS31FL3741_I2C_TIMEOUT
@ -66,8 +48,8 @@
# define IS31FL3741_CS_PULLDOWN IS31FL3741_PDR_32K_OHM
#endif
#ifndef IS31FL3741_GLOBALCURRENT
# define IS31FL3741_GLOBALCURRENT 0xFF
#ifndef IS31FL3741_GLOBAL_CURRENT
# define IS31FL3741_GLOBAL_CURRENT 0xFF
#endif
// Transfer buffer for TWITransmitData()
@ -104,8 +86,8 @@ bool is31fl3741_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
for (int i = 0; i < 342; i += 18) {
if (i == 180) {
// unlock the command register and select PG1
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_PWM1);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND_WRITE_LOCK, IS31FL3741_COMMAND_WRITE_LOCK_MAGIC);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND, IS31FL3741_COMMAND_PWM_1);
}
g_twi_transfer_buffer[0] = i % 180;
@ -181,20 +163,20 @@ void is31fl3741_init(uint8_t addr) {
// Unlock the command register.
// Unlock the command register.
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND_WRITE_LOCK, IS31FL3741_COMMAND_WRITE_LOCK_MAGIC);
// Select PG4
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_FUNCTION);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND, IS31FL3741_COMMAND_FUNCTION);
// Set to Normal operation
is31fl3741_write_register(addr, IS31FL3741_REG_CONFIGURATION, IS31FL3741_CONFIGURATION);
is31fl3741_write_register(addr, IS31FL3741_FUNCTION_REG_CONFIGURATION, IS31FL3741_CONFIGURATION);
// Set Golbal Current Control Register
is31fl3741_write_register(addr, IS31FL3741_REG_GLOBALCURRENT, IS31FL3741_GLOBALCURRENT);
is31fl3741_write_register(addr, IS31FL3741_FUNCTION_REG_GLOBAL_CURRENT, IS31FL3741_GLOBAL_CURRENT);
// Set Pull up & Down for SWx CSy
is31fl3741_write_register(addr, IS31FL3741_REG_PULLDOWNUP, ((IS31FL3741_CS_PULLDOWN << 4) | IS31FL3741_SW_PULLUP));
is31fl3741_write_register(addr, IS31FL3741_FUNCTION_REG_PULLDOWNUP, ((IS31FL3741_CS_PULLDOWN << 4) | IS31FL3741_SW_PULLUP));
// Set PWM frequency
is31fl3741_write_register(addr, IS31FL3741_REG_PWM_FREQUENCY, (IS31FL3741_PWM_FREQUENCY & 0b1111));
is31fl3741_write_register(addr, IS31FL3741_FUNCTION_REG_PWM_FREQUENCY, (IS31FL3741_PWM_FREQUENCY & 0b1111));
// is31fl3741_update_led_scaling_registers(addr, 0xFF, 0xFF, 0xFF);
@ -251,8 +233,8 @@ void is31fl3741_set_led_control_register(uint8_t index, bool red, bool green, bo
void is31fl3741_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// unlock the command register and select PG2
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_PWM0);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND_WRITE_LOCK, IS31FL3741_COMMAND_WRITE_LOCK_MAGIC);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND, IS31FL3741_COMMAND_PWM_0);
is31fl3741_write_pwm_buffer(addr, g_pwm_buffer[index]);
}
@ -271,8 +253,8 @@ void is31fl3741_set_pwm_buffer(const is31fl3741_led_t *pled, uint8_t red, uint8_
void is31fl3741_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_scaling_registers_update_required[index]) {
// unlock the command register and select PG2
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_SCALING_0);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND_WRITE_LOCK, IS31FL3741_COMMAND_WRITE_LOCK_MAGIC);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND, IS31FL3741_COMMAND_SCALING_0);
// CS1_SW1 to CS30_SW6 are on PG2
for (int i = CS1_SW1; i <= CS30_SW6; ++i) {
@ -280,8 +262,8 @@ void is31fl3741_update_led_control_registers(uint8_t addr, uint8_t index) {
}
// unlock the command register and select PG3
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3741_write_register(addr, IS31FL3741_COMMANDREGISTER, IS31FL3741_PAGE_SCALING_1);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND_WRITE_LOCK, IS31FL3741_COMMAND_WRITE_LOCK_MAGIC);
is31fl3741_write_register(addr, IS31FL3741_REG_COMMAND, IS31FL3741_COMMAND_SCALING_1);
// CS1_SW7 to CS39_SW9 are on PG3
for (int i = CS1_SW7; i <= CS39_SW9; ++i) {

23
drivers/led/issi/is31fl3741.h
View file

@ -53,7 +53,7 @@
# define IS31FL3741_CS_PULLDOWN ISSI_CSPULLUP
#endif
#ifdef ISSI_GLOBALCURRENT
# define IS31FL3741_GLOBALCURRENT ISSI_GLOBALCURRENT
# define IS31FL3741_GLOBAL_CURRENT ISSI_GLOBALCURRENT
#endif
#define is31_led is31fl3741_led_t
@ -69,6 +69,27 @@
#define PUR_32KR IS31FL3741_PUR_32K_OHM
// ========
#define IS31FL3741_REG_INTERRUPT_MASK 0xF0
#define IS31FL3741_REG_INTERRUPT_STATUS 0xF1
#define IS31FL3741_REG_ID 0xFC
#define IS31FL3741_REG_COMMAND 0xFD
#define IS31FL3741_COMMAND_PWM_0 0x00
#define IS31FL3741_COMMAND_PWM_1 0x01
#define IS31FL3741_COMMAND_SCALING_0 0x02
#define IS31FL3741_COMMAND_SCALING_1 0x03
#define IS31FL3741_COMMAND_FUNCTION 0x04
#define IS31FL3741_FUNCTION_REG_CONFIGURATION 0x00
#define IS31FL3741_FUNCTION_REG_GLOBAL_CURRENT 0x01
#define IS31FL3741_FUNCTION_REG_PULLDOWNUP 0x02
#define IS31FL3741_FUNCTION_REG_PWM_FREQUENCY 0x36
#define IS31FL3741_FUNCTION_REG_RESET 0x3F
#define IS31FL3741_REG_COMMAND_WRITE_LOCK 0xFE
#define IS31FL3741_COMMAND_WRITE_LOCK_MAGIC 0xC5
#define IS31FL3741_I2C_ADDRESS_GND 0x30
#define IS31FL3741_I2C_ADDRESS_SCL 0x31
#define IS31FL3741_I2C_ADDRESS_SDA 0x32

42
drivers/led/snled27351-simple.c
View file

@ -29,7 +29,7 @@
#endif
#ifndef SNLED27351_PHASE_CHANNEL
# define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_12CHANNEL
# define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_12_CHANNEL
#endif
#ifndef SNLED27351_CURRENT_TUNE
@ -134,48 +134,48 @@ void snled27351_init_drivers(void) {
void snled27351_init(uint8_t addr) {
// Select to function page
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_FUNCTION_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_FUNCTION);
// Setting LED driver to shutdown mode
snled27351_write_register(addr, SNLED27351_REG_CONFIGURATION, SNLED27351_MSKSW_SHUT_DOWN_MODE);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SOFTWARE_SHUTDOWN, SNLED27351_SOFTWARE_SHUTDOWN_SSD_SHUTDOWN);
// Setting internal channel pulldown/pullup
snled27351_write_register(addr, SNLED27351_REG_PDU, SNLED27351_MSKSET_CA_CB_CHANNEL);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_PULLDOWNUP, SNLED27351_PULLDOWNUP_ALL_ENABLED);
// Select number of scan phase
snled27351_write_register(addr, SNLED27351_REG_SCAN_PHASE, SNLED27351_PHASE_CHANNEL);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SCAN_PHASE, SNLED27351_PHASE_CHANNEL);
// Setting PWM Delay Phase
snled27351_write_register(addr, SNLED27351_REG_SLEW_RATE_CONTROL_MODE1, SNLED27351_MSKPWM_DELAY_PHASE_ENABLE);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SLEW_RATE_CONTROL_MODE_1, SNLED27351_SLEW_RATE_CONTROL_MODE_1_PDP_ENABLE);
// Setting Driving/Sinking Channel Slew Rate
snled27351_write_register(addr, SNLED27351_REG_SLEW_RATE_CONTROL_MODE2, SNLED27351_MSKDRIVING_SINKING_CHANNEL_SLEWRATE_ENABLE);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SLEW_RATE_CONTROL_MODE_2, SNLED27351_SLEW_RATE_CONTROL_MODE_2_DSL_ENABLE | SNLED27351_SLEW_RATE_CONTROL_MODE_2_SSL_ENABLE);
// Setting Iref
snled27351_write_register(addr, SNLED27351_REG_SOFTWARE_SLEEP, SNLED27351_MSKSLEEP_DISABLE);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SOFTWARE_SLEEP, 0);
// Set LED CONTROL PAGE (Page 0)
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_LED_CONTROL_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_LED_CONTROL);
for (int i = 0; i < SNLED27351_LED_CONTROL_ON_OFF_LENGTH; i++) {
snled27351_write_register(addr, i, 0x00);
}
// Set PWM PAGE (Page 1)
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_LED_PWM_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_PWM);
for (int i = 0; i < SNLED27351_LED_CURRENT_TUNE_LENGTH; i++) {
snled27351_write_register(addr, i, 0x00);
}
// Set CURRENT PAGE (Page 4)
uint8_t current_tune_reg_list[SNLED27351_LED_CURRENT_TUNE_LENGTH] = SNLED27351_CURRENT_TUNE;
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_CURRENT_TUNE_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_CURRENT_TUNE);
for (int i = 0; i < SNLED27351_LED_CURRENT_TUNE_LENGTH; i++) {
snled27351_write_register(addr, i, current_tune_reg_list[i]);
}
// Enable LEDs ON/OFF
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_LED_CONTROL_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_LED_CONTROL);
for (int i = 0; i < SNLED27351_LED_CONTROL_ON_OFF_LENGTH; i++) {
snled27351_write_register(addr, i, 0xFF);
}
// Select to function page
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_FUNCTION_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_FUNCTION);
// Setting LED driver to normal mode
snled27351_write_register(addr, SNLED27351_REG_CONFIGURATION, SNLED27351_MSKSW_NORMAL_MODE);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SOFTWARE_SHUTDOWN, SNLED27351_SOFTWARE_SHUTDOWN_SSD_NORMAL);
}
void snled27351_set_value(int index, uint8_t value) {
@ -215,7 +215,7 @@ void snled27351_set_led_control_register(uint8_t index, bool value) {
void snled27351_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_LED_PWM_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_PWM);
// If any of the transactions fail we risk writing dirty PG0,
// refresh page 0 just in case.
@ -228,7 +228,7 @@ void snled27351_update_pwm_buffers(uint8_t addr, uint8_t index) {
void snled27351_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_LED_CONTROL_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_LED_CONTROL);
for (int i = 0; i < SNLED27351_LED_CONTROL_REGISTER_COUNT; i++) {
snled27351_write_register(addr, i, g_led_control_registers[index][i]);
}
@ -251,16 +251,16 @@ void snled27351_flush(void) {
void snled27351_sw_return_normal(uint8_t addr) {
// Select to function page
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_FUNCTION_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_FUNCTION);
// Setting LED driver to normal mode
snled27351_write_register(addr, SNLED27351_REG_CONFIGURATION, SNLED27351_MSKSW_NORMAL_MODE);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SOFTWARE_SHUTDOWN, SNLED27351_SOFTWARE_SHUTDOWN_SSD_NORMAL);
}
void snled27351_sw_shutdown(uint8_t addr) {
// Select to function page
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_FUNCTION_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_FUNCTION);
// Setting LED driver to shutdown mode
snled27351_write_register(addr, SNLED27351_REG_CONFIGURATION, SNLED27351_MSKSW_SHUT_DOWN_MODE);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SOFTWARE_SHUTDOWN, SNLED27351_SOFTWARE_SHUTDOWN_SSD_SHUTDOWN);
// Write SW Sleep Register
snled27351_write_register(addr, SNLED27351_REG_SOFTWARE_SLEEP, SNLED27351_MSKSLEEP_ENABLE);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SOFTWARE_SLEEP, SNLED27351_SOFTWARE_SLEEP_ENABLE);
}

185
drivers/led/snled27351-simple.h
View file

@ -35,23 +35,98 @@
# define SNLED27351_CURRENT_TUNE CKLED2001_CURRENT_TUNE
#endif
#define MSKPHASE_12CHANNEL SNLED27351_MSKPHASE_12CHANNEL
#define MSKPHASE_11CHANNEL SNLED27351_MSKPHASE_11CHANNEL
#define MSKPHASE_10CHANNEL SNLED27351_MSKPHASE_10CHANNEL
#define MSKPHASE_9CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define MSKPHASE_8CHANNEL SNLED27351_MSKPHASE_8CHANNEL
#define MSKPHASE_7CHANNEL SNLED27351_MSKPHASE_7CHANNEL
#define MSKPHASE_6CHANNEL SNLED27351_MSKPHASE_6CHANNEL
#define MSKPHASE_5CHANNEL SNLED27351_MSKPHASE_5CHANNEL
#define MSKPHASE_4CHANNEL SNLED27351_MSKPHASE_4CHANNEL
#define MSKPHASE_3CHANNEL SNLED27351_MSKPHASE_3CHANNEL
#define MSKPHASE_2CHANNEL SNLED27351_MSKPHASE_2CHANNEL
#define MSKPHASE_1CHANNEL SNLED27351_MSKPHASE_1CHANNEL
#define MSKPHASE_12CHANNEL SNLED27351_SCAN_PHASE_12_CHANNEL
#define MSKPHASE_11CHANNEL SNLED27351_SCAN_PHASE_11_CHANNEL
#define MSKPHASE_10CHANNEL SNLED27351_SCAN_PHASE_10_CHANNEL
#define MSKPHASE_9CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
#define MSKPHASE_8CHANNEL SNLED27351_SCAN_PHASE_8_CHANNEL
#define MSKPHASE_7CHANNEL SNLED27351_SCAN_PHASE_7_CHANNEL
#define MSKPHASE_6CHANNEL SNLED27351_SCAN_PHASE_6_CHANNEL
#define MSKPHASE_5CHANNEL SNLED27351_SCAN_PHASE_5_CHANNEL
#define MSKPHASE_4CHANNEL SNLED27351_SCAN_PHASE_4_CHANNEL
#define MSKPHASE_3CHANNEL SNLED27351_SCAN_PHASE_3_CHANNEL
#define MSKPHASE_2CHANNEL SNLED27351_SCAN_PHASE_2_CHANNEL
#define MSKPHASE_1CHANNEL SNLED27351_SCAN_PHASE_1_CHANNEL
#define ckled2001_led snled27351_led_t
#define g_ckled2001_leds g_snled27351_leds
// ========
#define SNLED27351_REG_COMMAND 0xFD
#define SNLED27351_COMMAND_LED_CONTROL 0x00
#define SNLED27351_COMMAND_PWM 0x01
#define SNLED27351_COMMAND_FUNCTION 0x03
#define SNLED27351_COMMAND_CURRENT_TUNE 0x04
#define SNLED27351_FUNCTION_REG_SOFTWARE_SHUTDOWN 0x00
#define SNLED27351_SOFTWARE_SHUTDOWN_SSD_SHUTDOWN (0x0 << 0)
#define SNLED27351_SOFTWARE_SHUTDOWN_SSD_NORMAL (0x1 << 0)
#define SNLED27351_FUNCTION_REG_ID 0x11
#define SNLED27351_DRIVER_ID 0x8A
#define SNLED27351_FUNCTION_REG_PULLDOWNUP 0x13
#define SNLED27351_PULLDOWNUP_ALL_ENABLED 0xAA
#define SNLED27351_FUNCTION_REG_SCAN_PHASE 0x14
#define SNLED27351_SCAN_PHASE_12_CHANNEL 0x00
#define SNLED27351_SCAN_PHASE_11_CHANNEL 0x01
#define SNLED27351_SCAN_PHASE_10_CHANNEL 0x02
#define SNLED27351_SCAN_PHASE_9_CHANNEL 0x03
#define SNLED27351_SCAN_PHASE_8_CHANNEL 0x04
#define SNLED27351_SCAN_PHASE_7_CHANNEL 0x05
#define SNLED27351_SCAN_PHASE_6_CHANNEL 0x06
#define SNLED27351_SCAN_PHASE_5_CHANNEL 0x07
#define SNLED27351_SCAN_PHASE_4_CHANNEL 0x08
#define SNLED27351_SCAN_PHASE_3_CHANNEL 0x09
#define SNLED27351_SCAN_PHASE_2_CHANNEL 0x0A
#define SNLED27351_SCAN_PHASE_1_CHANNEL 0x0B
#define SNLED27351_FUNCTION_REG_SLEW_RATE_CONTROL_MODE_1 0x15
#define SNLED27351_SLEW_RATE_CONTROL_MODE_1_PDP_ENABLE (0b1 << 2)
#define SNLED27351_FUNCTION_REG_SLEW_RATE_CONTROL_MODE_2 0x16
#define SNLED27351_SLEW_RATE_CONTROL_MODE_2_SSL_ENABLE (0b1 << 6)
#define SNLED27351_SLEW_RATE_CONTROL_MODE_2_DSL_ENABLE (0b1 << 7)
#define SNLED27351_FUNCTION_REG_OPEN_SHORT_ENABLE 0x17
#define SNLED27351_OPEN_SHORT_ENABLE_SDS_ENABLE (0b1 << 6)
#define SNLED27351_OPEN_SHORT_ENABLE_ODS_ENABLE (0b1 << 7)
#define SNLED27351_FUNCTION_REG_OPEN_SHORT_DUTY 0x18
#define SNLED27351_FUNCTION_REG_OPEN_SHORT_FLAG 0x19
#define SNLED27351_OPEN_SHORT_FLAG_OSINT_ENABLE (0b1 << 6)
#define SNLED27351_OPEN_SHORT_FLAG_ODINT_ENABLE (0b1 << 7)
#define SNLED27351_FUNCTION_REG_SOFTWARE_SLEEP 0x1A
#define SNLED27351_SOFTWARE_SLEEP_ENABLE (0b1 << 1)
// LED Control Registers
#define SNLED27351_LED_CONTROL_ON_OFF_FIRST_ADDR 0x0
#define SNLED27351_LED_CONTROL_ON_OFF_LAST_ADDR 0x17
#define SNLED27351_LED_CONTROL_ON_OFF_LENGTH ((SNLED27351_LED_CONTROL_ON_OFF_LAST_ADDR - SNLED27351_LED_CONTROL_ON_OFF_FIRST_ADDR) + 1)
#define SNLED27351_LED_CONTROL_OPEN_FIRST_ADDR 0x18
#define SNLED27351_LED_CONTROL_OPEN_LAST_ADDR 0x2F
#define SNLED27351_LED_CONTROL_OPEN_LENGTH ((SNLED27351_LED_CONTROL_OPEN_LAST_ADDR - SNLED27351_LED_CONTROL_OPEN_FIRST_ADDR) + 1)
#define SNLED27351_LED_CONTROL_SHORT_FIRST_ADDR 0x30
#define SNLED27351_LED_CONTROL_SHORT_LAST_ADDR 0x47
#define SNLED27351_LED_CONTROL_SHORT_LENGTH ((SNLED27351_LED_CONTROL_SHORT_LAST_ADDR - SNLED27351_LED_CONTROL_SHORT_FIRST_ADDR) + 1)
#define SNLED27351_LED_CONTROL_PAGE_LENGTH 0x48
// LED Control Registers
#define SNLED27351_LED_PWM_FIRST_ADDR 0x00
#define SNLED27351_LED_PWM_LAST_ADDR 0xBF
#define SNLED27351_LED_PWM_LENGTH 0xC0
// Current Tune Registers
#define SNLED27351_LED_CURRENT_TUNE_FIRST_ADDR 0x00
#define SNLED27351_LED_CURRENT_TUNE_LAST_ADDR 0x0B
#define SNLED27351_LED_CURRENT_TUNE_LENGTH 0x0C
#define SNLED27351_I2C_ADDRESS_GND 0x74
#define SNLED27351_I2C_ADDRESS_SCL 0x75
#define SNLED27351_I2C_ADDRESS_SDA 0x76
@ -100,92 +175,6 @@ void snled27351_flush(void);
void snled27351_sw_return_normal(uint8_t addr);
void snled27351_sw_shutdown(uint8_t addr);
// Registers Page Define
#define SNLED27351_REG_CONFIGURE_CMD_PAGE 0xFD
#define SNLED27351_LED_CONTROL_PAGE 0x00
#define SNLED27351_LED_PWM_PAGE 0x01
#define SNLED27351_FUNCTION_PAGE 0x03
#define SNLED27351_CURRENT_TUNE_PAGE 0x04
// Function Register: address 0x00
#define SNLED27351_REG_CONFIGURATION 0x00
#define SNLED27351_MSKSW_SHUT_DOWN_MODE (0x0 << 0)
#define SNLED27351_MSKSW_NORMAL_MODE (0x1 << 0)
#define SNLED27351_REG_DRIVER_ID 0x11
#define SNLED27351_DRIVER_ID 0x8A
#define SNLED27351_REG_PDU 0x13
#define SNLED27351_MSKSET_CA_CB_CHANNEL 0xAA
#define SNLED27351_MSKCLR_CA_CB_CHANNEL 0x00
#define SNLED27351_REG_SCAN_PHASE 0x14
#define SNLED27351_MSKPHASE_12CHANNEL 0x00
#define SNLED27351_MSKPHASE_11CHANNEL 0x01
#define SNLED27351_MSKPHASE_10CHANNEL 0x02
#define SNLED27351_MSKPHASE_9CHANNEL 0x03
#define SNLED27351_MSKPHASE_8CHANNEL 0x04
#define SNLED27351_MSKPHASE_7CHANNEL 0x05
#define SNLED27351_MSKPHASE_6CHANNEL 0x06
#define SNLED27351_MSKPHASE_5CHANNEL 0x07
#define SNLED27351_MSKPHASE_4CHANNEL 0x08
#define SNLED27351_MSKPHASE_3CHANNEL 0x09
#define SNLED27351_MSKPHASE_2CHANNEL 0x0A
#define SNLED27351_MSKPHASE_1CHANNEL 0x0B
#define SNLED27351_REG_SLEW_RATE_CONTROL_MODE1 0x15
#define SNLED27351_MSKPWM_DELAY_PHASE_ENABLE 0x04
#define SNLED27351_MSKPWM_DELAY_PHASE_DISABLE 0x00
#define SNLED27351_REG_SLEW_RATE_CONTROL_MODE2 0x16
#define SNLED27351_MSKDRIVING_SINKING_CHANNEL_SLEWRATE_ENABLE 0xC0
#define SNLED27351_MSKDRIVING_SINKING_CHANNEL_SLEWRATE_DISABLE 0x00
#define SNLED27351_REG_OPEN_SHORT_ENABLE 0x17
#define SNLED27351_MSKOPEN_DETECTION_ENABLE (0x01 << 7)
#define SNLED27351_MSKOPEN_DETECTION_DISABLE (0x00)
#define SNLED27351_MSKSHORT_DETECTION_ENABLE (0x01 << 6)
#define SNLED27351_MSKSHORT_DETECTION_DISABLE (0x00)
#define SNLED27351_REG_OPEN_SHORT_DUTY 0x18
#define SNLED27351_REG_OPEN_SHORT_FLAG 0x19
#define SNLED27351_MSKOPEN_DETECTION_INTERRUPT_ENABLE (0x01 << 7)
#define SNLED27351_MSKOPEN_DETECTION_INTERRUPT_DISABLE (0x00)
#define SNLED27351_MSKSHORT_DETECTION_INTERRUPT_ENABLE (0x01 << 6)
#define SNLED27351_MSKSHORT_DETECTION_INTERRUPT_DISABLE (0x00)
#define SNLED27351_REG_SOFTWARE_SLEEP 0x1A
#define SNLED27351_MSKSLEEP_ENABLE 0x02
#define SNLED27351_MSKSLEEP_DISABLE 0x00
// LED Control Registers
#define SNLED27351_LED_CONTROL_ON_OFF_FIRST_ADDR 0x0
#define SNLED27351_LED_CONTROL_ON_OFF_LAST_ADDR 0x17
#define SNLED27351_LED_CONTROL_ON_OFF_LENGTH ((SNLED27351_LED_CONTROL_ON_OFF_LAST_ADDR - SNLED27351_LED_CONTROL_ON_OFF_FIRST_ADDR) + 1)
#define SNLED27351_LED_CONTROL_OPEN_FIRST_ADDR 0x18
#define SNLED27351_LED_CONTROL_OPEN_LAST_ADDR 0x2F
#define SNLED27351_LED_CONTROL_OPEN_LENGTH ((SNLED27351_LED_CONTROL_OPEN_LAST_ADDR - SNLED27351_LED_CONTROL_OPEN_FIRST_ADDR) + 1)
#define SNLED27351_LED_CONTROL_SHORT_FIRST_ADDR 0x30
#define SNLED27351_LED_CONTROL_SHORT_LAST_ADDR 0x47
#define SNLED27351_LED_CONTROL_SHORT_LENGTH ((SNLED27351_LED_CONTROL_SHORT_LAST_ADDR - SNLED27351_LED_CONTROL_SHORT_FIRST_ADDR) + 1)
#define SNLED27351_LED_CONTROL_PAGE_LENGTH 0x48
// LED Control Registers
#define SNLED27351_LED_PWM_FIRST_ADDR 0x00
#define SNLED27351_LED_PWM_LAST_ADDR 0xBF
#define SNLED27351_LED_PWM_LENGTH 0xC0
// Current Tune Registers
#define SNLED27351_LED_CURRENT_TUNE_FIRST_ADDR 0x00
#define SNLED27351_LED_CURRENT_TUNE_LAST_ADDR 0x0B
#define SNLED27351_LED_CURRENT_TUNE_LENGTH 0x0C
#define A_1 0x00
#define A_2 0x01
#define A_3 0x02

42
drivers/led/snled27351.c
View file

@ -29,7 +29,7 @@
#endif
#ifndef SNLED27351_PHASE_CHANNEL
# define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_12CHANNEL
# define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_12_CHANNEL
#endif
#ifndef SNLED27351_CURRENT_TUNE
@ -133,48 +133,48 @@ void snled27351_init_drivers(void) {
void snled27351_init(uint8_t addr) {
// Select to function page
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_FUNCTION_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_FUNCTION);
// Setting LED driver to shutdown mode
snled27351_write_register(addr, SNLED27351_REG_CONFIGURATION, SNLED27351_MSKSW_SHUT_DOWN_MODE);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SOFTWARE_SHUTDOWN, SNLED27351_SOFTWARE_SHUTDOWN_SSD_SHUTDOWN);
// Setting internal channel pulldown/pullup
snled27351_write_register(addr, SNLED27351_REG_PDU, SNLED27351_MSKSET_CA_CB_CHANNEL);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_PULLDOWNUP, SNLED27351_PULLDOWNUP_ALL_ENABLED);
// Select number of scan phase
snled27351_write_register(addr, SNLED27351_REG_SCAN_PHASE, SNLED27351_PHASE_CHANNEL);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SCAN_PHASE, SNLED27351_PHASE_CHANNEL);
// Setting PWM Delay Phase
snled27351_write_register(addr, SNLED27351_REG_SLEW_RATE_CONTROL_MODE1, SNLED27351_MSKPWM_DELAY_PHASE_ENABLE);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SLEW_RATE_CONTROL_MODE_1, SNLED27351_SLEW_RATE_CONTROL_MODE_1_PDP_ENABLE);
// Setting Driving/Sinking Channel Slew Rate
snled27351_write_register(addr, SNLED27351_REG_SLEW_RATE_CONTROL_MODE2, SNLED27351_MSKDRIVING_SINKING_CHANNEL_SLEWRATE_ENABLE);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SLEW_RATE_CONTROL_MODE_2, SNLED27351_SLEW_RATE_CONTROL_MODE_2_DSL_ENABLE | SNLED27351_SLEW_RATE_CONTROL_MODE_2_SSL_ENABLE);
// Setting Iref
snled27351_write_register(addr, SNLED27351_REG_SOFTWARE_SLEEP, SNLED27351_MSKSLEEP_DISABLE);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SOFTWARE_SLEEP, 0);
// Set LED CONTROL PAGE (Page 0)
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_LED_CONTROL_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_LED_CONTROL);
for (int i = 0; i < SNLED27351_LED_CONTROL_ON_OFF_LENGTH; i++) {
snled27351_write_register(addr, i, 0x00);
}
// Set PWM PAGE (Page 1)
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_LED_PWM_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_PWM);
for (int i = 0; i < SNLED27351_LED_CURRENT_TUNE_LENGTH; i++) {
snled27351_write_register(addr, i, 0x00);
}
// Set CURRENT PAGE (Page 4)
uint8_t current_tune_reg_list[SNLED27351_LED_CURRENT_TUNE_LENGTH] = SNLED27351_CURRENT_TUNE;
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_CURRENT_TUNE_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_CURRENT_TUNE);
for (int i = 0; i < SNLED27351_LED_CURRENT_TUNE_LENGTH; i++) {
snled27351_write_register(addr, i, current_tune_reg_list[i]);
}
// Enable LEDs ON/OFF
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_LED_CONTROL_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_LED_CONTROL);
for (int i = 0; i < SNLED27351_LED_CONTROL_ON_OFF_LENGTH; i++) {
snled27351_write_register(addr, i, 0xFF);
}
// Select to function page
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_FUNCTION_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_FUNCTION);
// Setting LED driver to normal mode
snled27351_write_register(addr, SNLED27351_REG_CONFIGURATION, SNLED27351_MSKSW_NORMAL_MODE);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SOFTWARE_SHUTDOWN, SNLED27351_SOFTWARE_SHUTDOWN_SSD_NORMAL);
}
void snled27351_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
@ -230,7 +230,7 @@ void snled27351_set_led_control_register(uint8_t index, bool red, bool green, bo
void snled27351_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_LED_PWM_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_PWM);
// If any of the transactions fail we risk writing dirty PG0,
// refresh page 0 just in case.
@ -243,7 +243,7 @@ void snled27351_update_pwm_buffers(uint8_t addr, uint8_t index) {
void snled27351_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_LED_CONTROL_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_LED_CONTROL);
for (int i = 0; i < SNLED27351_LED_CONTROL_REGISTER_COUNT; i++) {
snled27351_write_register(addr, i, g_led_control_registers[index][i]);
}
@ -266,16 +266,16 @@ void snled27351_flush(void) {
void snled27351_sw_return_normal(uint8_t addr) {
// Select to function page
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_FUNCTION_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_FUNCTION);
// Setting LED driver to normal mode
snled27351_write_register(addr, SNLED27351_REG_CONFIGURATION, SNLED27351_MSKSW_NORMAL_MODE);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SOFTWARE_SHUTDOWN, SNLED27351_SOFTWARE_SHUTDOWN_SSD_NORMAL);
}
void snled27351_sw_shutdown(uint8_t addr) {
// Select to function page
snled27351_write_register(addr, SNLED27351_REG_CONFIGURE_CMD_PAGE, SNLED27351_FUNCTION_PAGE);
snled27351_write_register(addr, SNLED27351_REG_COMMAND, SNLED27351_COMMAND_FUNCTION);
// Setting LED driver to shutdown mode
snled27351_write_register(addr, SNLED27351_REG_CONFIGURATION, SNLED27351_MSKSW_SHUT_DOWN_MODE);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SOFTWARE_SHUTDOWN, SNLED27351_SOFTWARE_SHUTDOWN_SSD_SHUTDOWN);
// Write SW Sleep Register
snled27351_write_register(addr, SNLED27351_REG_SOFTWARE_SLEEP, SNLED27351_MSKSLEEP_ENABLE);
snled27351_write_register(addr, SNLED27351_FUNCTION_REG_SOFTWARE_SLEEP, SNLED27351_SOFTWARE_SLEEP_ENABLE);
}

185
drivers/led/snled27351.h
View file

@ -47,23 +47,98 @@
# define SNLED27351_CURRENT_TUNE CKLED2001_CURRENT_TUNE
#endif
#define MSKPHASE_12CHANNEL SNLED27351_MSKPHASE_12CHANNEL
#define MSKPHASE_11CHANNEL SNLED27351_MSKPHASE_11CHANNEL
#define MSKPHASE_10CHANNEL SNLED27351_MSKPHASE_10CHANNEL
#define MSKPHASE_9CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define MSKPHASE_8CHANNEL SNLED27351_MSKPHASE_8CHANNEL
#define MSKPHASE_7CHANNEL SNLED27351_MSKPHASE_7CHANNEL
#define MSKPHASE_6CHANNEL SNLED27351_MSKPHASE_6CHANNEL
#define MSKPHASE_5CHANNEL SNLED27351_MSKPHASE_5CHANNEL
#define MSKPHASE_4CHANNEL SNLED27351_MSKPHASE_4CHANNEL
#define MSKPHASE_3CHANNEL SNLED27351_MSKPHASE_3CHANNEL
#define MSKPHASE_2CHANNEL SNLED27351_MSKPHASE_2CHANNEL
#define MSKPHASE_1CHANNEL SNLED27351_MSKPHASE_1CHANNEL
#define MSKPHASE_12CHANNEL SNLED27351_SCAN_PHASE_12_CHANNEL
#define MSKPHASE_11CHANNEL SNLED27351_SCAN_PHASE_11_CHANNEL
#define MSKPHASE_10CHANNEL SNLED27351_SCAN_PHASE_10_CHANNEL
#define MSKPHASE_9CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
#define MSKPHASE_8CHANNEL SNLED27351_SCAN_PHASE_8_CHANNEL
#define MSKPHASE_7CHANNEL SNLED27351_SCAN_PHASE_7_CHANNEL
#define MSKPHASE_6CHANNEL SNLED27351_SCAN_PHASE_6_CHANNEL
#define MSKPHASE_5CHANNEL SNLED27351_SCAN_PHASE_5_CHANNEL
#define MSKPHASE_4CHANNEL SNLED27351_SCAN_PHASE_4_CHANNEL
#define MSKPHASE_3CHANNEL SNLED27351_SCAN_PHASE_3_CHANNEL
#define MSKPHASE_2CHANNEL SNLED27351_SCAN_PHASE_2_CHANNEL
#define MSKPHASE_1CHANNEL SNLED27351_SCAN_PHASE_1_CHANNEL
#define ckled2001_led snled27351_led_t
#define g_ckled2001_leds g_snled27351_leds
// ========
#define SNLED27351_REG_COMMAND 0xFD
#define SNLED27351_COMMAND_LED_CONTROL 0x00
#define SNLED27351_COMMAND_PWM 0x01
#define SNLED27351_COMMAND_FUNCTION 0x03
#define SNLED27351_COMMAND_CURRENT_TUNE 0x04
#define SNLED27351_FUNCTION_REG_SOFTWARE_SHUTDOWN 0x00
#define SNLED27351_SOFTWARE_SHUTDOWN_SSD_SHUTDOWN (0x0 << 0)
#define SNLED27351_SOFTWARE_SHUTDOWN_SSD_NORMAL (0x1 << 0)
#define SNLED27351_FUNCTION_REG_ID 0x11
#define SNLED27351_DRIVER_ID 0x8A
#define SNLED27351_FUNCTION_REG_PULLDOWNUP 0x13
#define SNLED27351_PULLDOWNUP_ALL_ENABLED 0xAA
#define SNLED27351_FUNCTION_REG_SCAN_PHASE 0x14
#define SNLED27351_SCAN_PHASE_12_CHANNEL 0x00
#define SNLED27351_SCAN_PHASE_11_CHANNEL 0x01
#define SNLED27351_SCAN_PHASE_10_CHANNEL 0x02
#define SNLED27351_SCAN_PHASE_9_CHANNEL 0x03
#define SNLED27351_SCAN_PHASE_8_CHANNEL 0x04
#define SNLED27351_SCAN_PHASE_7_CHANNEL 0x05
#define SNLED27351_SCAN_PHASE_6_CHANNEL 0x06
#define SNLED27351_SCAN_PHASE_5_CHANNEL 0x07
#define SNLED27351_SCAN_PHASE_4_CHANNEL 0x08
#define SNLED27351_SCAN_PHASE_3_CHANNEL 0x09
#define SNLED27351_SCAN_PHASE_2_CHANNEL 0x0A
#define SNLED27351_SCAN_PHASE_1_CHANNEL 0x0B
#define SNLED27351_FUNCTION_REG_SLEW_RATE_CONTROL_MODE_1 0x15
#define SNLED27351_SLEW_RATE_CONTROL_MODE_1_PDP_ENABLE (0b1 << 2)
#define SNLED27351_FUNCTION_REG_SLEW_RATE_CONTROL_MODE_2 0x16
#define SNLED27351_SLEW_RATE_CONTROL_MODE_2_SSL_ENABLE (0b1 << 6)
#define SNLED27351_SLEW_RATE_CONTROL_MODE_2_DSL_ENABLE (0b1 << 7)
#define SNLED27351_FUNCTION_REG_OPEN_SHORT_ENABLE 0x17
#define SNLED27351_OPEN_SHORT_ENABLE_SDS_ENABLE (0b1 << 6)
#define SNLED27351_OPEN_SHORT_ENABLE_ODS_ENABLE (0b1 << 7)
#define SNLED27351_FUNCTION_REG_OPEN_SHORT_DUTY 0x18
#define SNLED27351_FUNCTION_REG_OPEN_SHORT_FLAG 0x19
#define SNLED27351_OPEN_SHORT_FLAG_OSINT_ENABLE (0b1 << 6)
#define SNLED27351_OPEN_SHORT_FLAG_ODINT_ENABLE (0b1 << 7)
#define SNLED27351_FUNCTION_REG_SOFTWARE_SLEEP 0x1A
#define SNLED27351_SOFTWARE_SLEEP_ENABLE (0b1 << 1)
// LED Control Registers
#define SNLED27351_LED_CONTROL_ON_OFF_FIRST_ADDR 0x0
#define SNLED27351_LED_CONTROL_ON_OFF_LAST_ADDR 0x17
#define SNLED27351_LED_CONTROL_ON_OFF_LENGTH ((SNLED27351_LED_CONTROL_ON_OFF_LAST_ADDR - SNLED27351_LED_CONTROL_ON_OFF_FIRST_ADDR) + 1)
#define SNLED27351_LED_CONTROL_OPEN_FIRST_ADDR 0x18
#define SNLED27351_LED_CONTROL_OPEN_LAST_ADDR 0x2F
#define SNLED27351_LED_CONTROL_OPEN_LENGTH ((SNLED27351_LED_CONTROL_OPEN_LAST_ADDR - SNLED27351_LED_CONTROL_OPEN_FIRST_ADDR) + 1)
#define SNLED27351_LED_CONTROL_SHORT_FIRST_ADDR 0x30
#define SNLED27351_LED_CONTROL_SHORT_LAST_ADDR 0x47
#define SNLED27351_LED_CONTROL_SHORT_LENGTH ((SNLED27351_LED_CONTROL_SHORT_LAST_ADDR - SNLED27351_LED_CONTROL_SHORT_FIRST_ADDR) + 1)
#define SNLED27351_LED_CONTROL_PAGE_LENGTH 0x48
// LED Control Registers
#define SNLED27351_LED_PWM_FIRST_ADDR 0x00
#define SNLED27351_LED_PWM_LAST_ADDR 0xBF
#define SNLED27351_LED_PWM_LENGTH 0xC0
// Current Tune Registers
#define SNLED27351_LED_CURRENT_TUNE_FIRST_ADDR 0x00
#define SNLED27351_LED_CURRENT_TUNE_LAST_ADDR 0x0B
#define SNLED27351_LED_CURRENT_TUNE_LENGTH 0x0C
#define SNLED27351_I2C_ADDRESS_GND 0x74
#define SNLED27351_I2C_ADDRESS_SCL 0x75
#define SNLED27351_I2C_ADDRESS_SDA 0x76
@ -114,92 +189,6 @@ void snled27351_flush(void);
void snled27351_sw_return_normal(uint8_t addr);
void snled27351_sw_shutdown(uint8_t addr);
// Registers Page Define
#define SNLED27351_REG_CONFIGURE_CMD_PAGE 0xFD
#define SNLED27351_LED_CONTROL_PAGE 0x00
#define SNLED27351_LED_PWM_PAGE 0x01
#define SNLED27351_FUNCTION_PAGE 0x03
#define SNLED27351_CURRENT_TUNE_PAGE 0x04
// Function Register: address 0x00
#define SNLED27351_REG_CONFIGURATION 0x00
#define SNLED27351_MSKSW_SHUT_DOWN_MODE (0x0 << 0)
#define SNLED27351_MSKSW_NORMAL_MODE (0x1 << 0)
#define SNLED27351_REG_DRIVER_ID 0x11
#define SNLED27351_DRIVER_ID 0x8A
#define SNLED27351_REG_PDU 0x13
#define SNLED27351_MSKSET_CA_CB_CHANNEL 0xAA
#define SNLED27351_MSKCLR_CA_CB_CHANNEL 0x00
#define SNLED27351_REG_SCAN_PHASE 0x14
#define SNLED27351_MSKPHASE_12CHANNEL 0x00
#define SNLED27351_MSKPHASE_11CHANNEL 0x01
#define SNLED27351_MSKPHASE_10CHANNEL 0x02
#define SNLED27351_MSKPHASE_9CHANNEL 0x03
#define SNLED27351_MSKPHASE_8CHANNEL 0x04
#define SNLED27351_MSKPHASE_7CHANNEL 0x05
#define SNLED27351_MSKPHASE_6CHANNEL 0x06
#define SNLED27351_MSKPHASE_5CHANNEL 0x07
#define SNLED27351_MSKPHASE_4CHANNEL 0x08
#define SNLED27351_MSKPHASE_3CHANNEL 0x09
#define SNLED27351_MSKPHASE_2CHANNEL 0x0A
#define SNLED27351_MSKPHASE_1CHANNEL 0x0B
#define SNLED27351_REG_SLEW_RATE_CONTROL_MODE1 0x15
#define SNLED27351_MSKPWM_DELAY_PHASE_ENABLE 0x04
#define SNLED27351_MSKPWM_DELAY_PHASE_DISABLE 0x00
#define SNLED27351_REG_SLEW_RATE_CONTROL_MODE2 0x16
#define SNLED27351_MSKDRIVING_SINKING_CHANNEL_SLEWRATE_ENABLE 0xC0
#define SNLED27351_MSKDRIVING_SINKING_CHANNEL_SLEWRATE_DISABLE 0x00
#define SNLED27351_REG_OPEN_SHORT_ENABLE 0x17
#define SNLED27351_MSKOPEN_DETECTION_ENABLE (0x01 << 7)
#define SNLED27351_MSKOPEN_DETECTION_DISABLE (0x00)
#define SNLED27351_MSKSHORT_DETECTION_ENABLE (0x01 << 6)
#define SNLED27351_MSKSHORT_DETECTION_DISABLE (0x00)
#define SNLED27351_REG_OPEN_SHORT_DUTY 0x18
#define SNLED27351_REG_OPEN_SHORT_FLAG 0x19
#define SNLED27351_MSKOPEN_DETECTION_INTERRUPT_ENABLE (0x01 << 7)
#define SNLED27351_MSKOPEN_DETECTION_INTERRUPT_DISABLE (0x00)
#define SNLED27351_MSKSHORT_DETECTION_INTERRUPT_ENABLE (0x01 << 6)
#define SNLED27351_MSKSHORT_DETECTION_INTERRUPT_DISABLE (0x00)
#define SNLED27351_REG_SOFTWARE_SLEEP 0x1A
#define SNLED27351_MSKSLEEP_ENABLE 0x02
#define SNLED27351_MSKSLEEP_DISABLE 0x00
// LED Control Registers
#define SNLED27351_LED_CONTROL_ON_OFF_FIRST_ADDR 0x0
#define SNLED27351_LED_CONTROL_ON_OFF_LAST_ADDR 0x17
#define SNLED27351_LED_CONTROL_ON_OFF_LENGTH ((SNLED27351_LED_CONTROL_ON_OFF_LAST_ADDR - SNLED27351_LED_CONTROL_ON_OFF_FIRST_ADDR) + 1)
#define SNLED27351_LED_CONTROL_OPEN_FIRST_ADDR 0x18
#define SNLED27351_LED_CONTROL_OPEN_LAST_ADDR 0x2F
#define SNLED27351_LED_CONTROL_OPEN_LENGTH ((SNLED27351_LED_CONTROL_OPEN_LAST_ADDR - SNLED27351_LED_CONTROL_OPEN_FIRST_ADDR) + 1)
#define SNLED27351_LED_CONTROL_SHORT_FIRST_ADDR 0x30
#define SNLED27351_LED_CONTROL_SHORT_LAST_ADDR 0x47
#define SNLED27351_LED_CONTROL_SHORT_LENGTH ((SNLED27351_LED_CONTROL_SHORT_LAST_ADDR - SNLED27351_LED_CONTROL_SHORT_FIRST_ADDR) + 1)
#define SNLED27351_LED_CONTROL_PAGE_LENGTH 0x48
// LED Control Registers
#define SNLED27351_LED_PWM_FIRST_ADDR 0x00
#define SNLED27351_LED_PWM_LAST_ADDR 0xBF
#define SNLED27351_LED_PWM_LENGTH 0xC0
// Current Tune Registers
#define SNLED27351_LED_CURRENT_TUNE_FIRST_ADDR 0x00
#define SNLED27351_LED_CURRENT_TUNE_LAST_ADDR 0x0B
#define SNLED27351_LED_CURRENT_TUNE_LENGTH 0x0C
#define A_1 0x00
#define A_2 0x01
#define A_3 0x02

48
keyboards/input_club/k_type/is31fl3733-dual.c
View file

@ -20,22 +20,6 @@
#include "i2c_master.h"
#include "wait.h"
#define IS31FL3733_COMMANDREGISTER 0xFD
#define IS31FL3733_COMMANDREGISTER_WRITELOCK 0xFE
#define IS31FL3733_INTERRUPTMASKREGISTER 0xF0
#define IS31FL3733_INTERRUPTSTATUSREGISTER 0xF1
#define IS31FL3733_PAGE_LEDCONTROL 0x00 // PG0
#define IS31FL3733_PAGE_PWM 0x01 // PG1
#define IS31FL3733_PAGE_AUTOBREATH 0x02 // PG2
#define IS31FL3733_PAGE_FUNCTION 0x03 // PG3
#define IS31FL3733_REG_CONFIGURATION 0x00 // PG3
#define IS31FL3733_REG_GLOBALCURRENT 0x01 // PG3
#define IS31FL3733_REG_RESET 0x11 // PG3
#define IS31FL3733_REG_SW_PULLUP 0x0F // PG3
#define IS31FL3733_REG_CS_PULLDOWN 0x10 // PG3
#define IS31FL3733_PWM_REGISTER_COUNT 192
#define IS31FL3733_LED_CONTROL_REGISTER_COUNT 24
@ -59,8 +43,8 @@
# define IS31FL3733_CS_PULLDOWN IS31FL3733_PDR_0_OHM
#endif
#ifndef IS31FL3733_GLOBALCURRENT
# define IS31FL3733_GLOBALCURRENT 0xFF
#ifndef IS31FL3733_GLOBAL_CURRENT
# define IS31FL3733_GLOBAL_CURRENT 0xFF
#endif
#ifndef IS31FL3733_SYNC_1
@ -167,20 +151,20 @@ void is31fl3733_init(uint8_t bus, uint8_t addr, uint8_t sync) {
// Sync is passed so set it according to the datasheet.
// Unlock the command register.
is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(bus, addr, IS31FL3733_REG_COMMAND_WRITE_LOCK, IS31FL3733_COMMAND_WRITE_LOCK_MAGIC);
// Select PG0
is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
is31fl3733_write_register(bus, addr, IS31FL3733_REG_COMMAND, IS31FL3733_COMMAND_LED_CONTROL);
// Turn off all LEDs.
for (int i = 0; i < IS31FL3733_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3733_write_register(bus, addr, i, 0x00);
}
// Unlock the command register.
is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(bus, addr, IS31FL3733_REG_COMMAND_WRITE_LOCK, IS31FL3733_COMMAND_WRITE_LOCK_MAGIC);
// Select PG1
is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
is31fl3733_write_register(bus, addr, IS31FL3733_REG_COMMAND, IS31FL3733_COMMAND_PWM);
// Set PWM on all LEDs to 0
// No need to setup Breath registers to PWM as that is the default.
for (int i = 0; i < IS31FL3733_PWM_REGISTER_COUNT; i++) {
@ -188,18 +172,18 @@ void is31fl3733_init(uint8_t bus, uint8_t addr, uint8_t sync) {
}
// Unlock the command register.
is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(bus, addr, IS31FL3733_REG_COMMAND_WRITE_LOCK, IS31FL3733_COMMAND_WRITE_LOCK_MAGIC);
// Select PG3
is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_FUNCTION);
is31fl3733_write_register(bus, addr, IS31FL3733_REG_COMMAND, IS31FL3733_COMMAND_FUNCTION);
// Set de-ghost pull-up resistors (SWx)
is31fl3733_write_register(bus, addr, IS31FL3733_REG_SW_PULLUP, IS31FL3733_SW_PULLUP);
is31fl3733_write_register(bus, addr, IS31FL3733_FUNCTION_REG_SW_PULLUP, IS31FL3733_SW_PULLUP);
// Set de-ghost pull-down resistors (CSx)
is31fl3733_write_register(bus, addr, IS31FL3733_REG_CS_PULLDOWN, IS31FL3733_CS_PULLDOWN);
is31fl3733_write_register(bus, addr, IS31FL3733_FUNCTION_REG_CS_PULLDOWN, IS31FL3733_CS_PULLDOWN);
// Set global current to maximum.
is31fl3733_write_register(bus, addr, IS31FL3733_REG_GLOBALCURRENT, IS31FL3733_GLOBALCURRENT);
is31fl3733_write_register(bus, addr, IS31FL3733_FUNCTION_REG_GLOBAL_CURRENT, IS31FL3733_GLOBAL_CURRENT);
// Disable software shutdown.
is31fl3733_write_register(bus, addr, IS31FL3733_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((IS31FL3733_PWM_FREQUENCY & 0b111) << 3) | 0x01);
is31fl3733_write_register(bus, addr, IS31FL3733_FUNCTION_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((IS31FL3733_PWM_FREQUENCY & 0b111) << 3) | 0x01);
// Wait 10ms to ensure the device has woken up.
wait_ms(10);
@ -259,8 +243,8 @@ void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bo
void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// Firstly we need to unlock the command register and select PG1.
is31fl3733_write_register(index, addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(index, addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
is31fl3733_write_register(index, addr, IS31FL3733_REG_COMMAND_WRITE_LOCK, IS31FL3733_COMMAND_WRITE_LOCK_MAGIC);
is31fl3733_write_register(index, addr, IS31FL3733_REG_COMMAND, IS31FL3733_COMMAND_PWM);
// If any of the transactions fail we risk writing dirty PG0,
// refresh page 0 just in case.
@ -274,8 +258,8 @@ void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
// Firstly we need to unlock the command register and select PG0
is31fl3733_write_register(index, addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(index, addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
is31fl3733_write_register(index, addr, IS31FL3733_REG_COMMAND_WRITE_LOCK, IS31FL3733_COMMAND_WRITE_LOCK_MAGIC);
is31fl3733_write_register(index, addr, IS31FL3733_REG_COMMAND, IS31FL3733_COMMAND_LED_CONTROL);
for (int i = 0; i < IS31FL3733_LED_CONTROL_REGISTER_COUNT; i++) {
is31fl3733_write_register(index, addr, i, g_led_control_registers[index][i]);
}

19
keyboards/input_club/k_type/is31fl3733-dual.h
View file

@ -22,6 +22,25 @@
#include <stdbool.h>
#include "progmem.h"
#define IS31FL3733_REG_INTERRUPT_MASK 0xF0
#define IS31FL3733_REG_INTERRUPT_STATUS 0xF1
#define IS31FL3733_REG_COMMAND 0xFD
#define IS31FL3733_COMMAND_LED_CONTROL 0x00
#define IS31FL3733_COMMAND_PWM 0x01
#define IS31FL3733_COMMAND_AUTO_BREATH 0x02
#define IS31FL3733_COMMAND_FUNCTION 0x03
#define IS31FL3733_FUNCTION_REG_CONFIGURATION 0x00
#define IS31FL3733_FUNCTION_REG_GLOBAL_CURRENT 0x01
#define IS31FL3733_FUNCTION_REG_SW_PULLUP 0x0F
#define IS31FL3733_FUNCTION_REG_CS_PULLDOWN 0x10
#define IS31FL3733_FUNCTION_REG_RESET 0x11
#define IS31FL3733_REG_COMMAND_WRITE_LOCK 0xFE
#define IS31FL3733_COMMAND_WRITE_LOCK_MAGIC 0xC5
#define IS31FL3733_I2C_ADDRESS_GND_GND 0x50
#define IS31FL3733_I2C_ADDRESS_GND_SCL 0x51
#define IS31FL3733_I2C_ADDRESS_GND_SDA 0x52

2
keyboards/keychron/c1_pro/ansi/rgb/config.h
View file

@ -29,7 +29,7 @@
#define DRIVER_2_LED_TOTAL 39
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
/* Set led driver current */
#define SNLED27351_CURRENT_TUNE \
{ 0x9D, 0x9D, 0x44, 0x9D, 0x9D, 0x44, 0x9D, 0x9D, 0x44, 0x9D, 0x9D, 0x44 }

2
keyboards/keychron/c1_pro/ansi/white/config.h
View file

@ -26,7 +26,7 @@
/* LED Matrix Configuration */
#define LED_MATRIX_LED_COUNT 90
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
/* Set led driver current */
#define SNLED27351_CURRENT_TUNE \
{ 0x9D, 0x9D, 0x44, 0x9D, 0x9D, 0x44, 0x9D, 0x9D, 0x44, 0x9D, 0x9D, 0x44 }

2
keyboards/keychron/q0/plus/config.h
View file

@ -23,7 +23,7 @@
/* RGB Matrix Configuration */
#define RGB_MATRIX_LED_COUNT 26
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
/* Encoder Configuration*/
#define ENCODER_DEFAULT_POS 0x3

2
keyboards/keychron/q10/config.h
View file

@ -41,7 +41,7 @@
#define I2C1_TIMINGR_SCLH 15U
#define I2C1_TIMINGR_SCLL 51U
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
#define SNLED27351_CURRENT_TUNE \
{ 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A }

2
keyboards/keychron/q1v2/config.h
View file

@ -44,7 +44,7 @@
#define WEAR_LEVELING_LOGICAL_SIZE 2048
#define WEAR_LEVELING_BACKING_SIZE (WEAR_LEVELING_LOGICAL_SIZE * 2)
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
/* Set LED driver current */
#define SNLED27351_CURRENT_TUNE \
{ 0xA6, 0xA6, 0x50, 0xA6, 0xA6, 0x50, 0xA6, 0xA6, 0x50, 0xA6, 0xA6, 0x50 }

2
keyboards/keychron/q2/config.h
View file

@ -26,7 +26,7 @@
#define SNLED27351_I2C_ADDRESS_1 SNLED27351_I2C_ADDRESS_VDDIO
#define SNLED27351_I2C_ADDRESS_2 SNLED27351_I2C_ADDRESS_GND
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
/* Disable DIP switch in matrix data */
#define MATRIX_MASKED

2
keyboards/keychron/q3/config.h
View file

@ -28,7 +28,7 @@
#define I2C1_TIMINGR_SCLH 15U
#define I2C1_TIMINGR_SCLL 51U
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
/* DIP switch */
#define DIP_SWITCH_MATRIX_GRID { {5, 4} }

3
keyboards/keychron/q4/ansi/v1/config.h
View file

@ -24,5 +24,4 @@
/* RGB Matrix Configuration */
#define RGB_MATRIX_LED_COUNT 61
/* Scan phase of led driver set as SNLED27351_MSKPHASE_9CHANNEL(defined as 0x03 in SNLED27351.h) */
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL

2
keyboards/keychron/q65/config.h
View file

@ -37,7 +37,7 @@
#define I2C1_TIMINGR_SCLH 15U
#define I2C1_TIMINGR_SCLL 30U
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
#define SNLED27351_CURRENT_TUNE \
{ 0xB8, 0xB8, 0x58, 0xB8, 0xB8, 0x58, 0xB8, 0xB8, 0x58, 0xB8, 0xB8, 0x58 }

2
keyboards/keychron/q7/config.h
View file

@ -28,7 +28,7 @@
#define I2C1_TIMINGR_SCLH 15U
#define I2C1_TIMINGR_SCLL 51U
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
#define SNLED27351_CURRENT_TUNE \
{ 0xF8, 0xF8, 0x80, 0xF8, 0xF8, 0x80, 0xF8, 0xF8, 0x80, 0xF8, 0xF8, 0x80 }

2
keyboards/keychron/q8/config.h
View file

@ -31,7 +31,7 @@
#define I2C1_TIMINGR_SCLH 15U
#define I2C1_TIMINGR_SCLL 51U
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
#define SNLED27351_CURRENT_TUNE \
{ 0xC4, 0xC4, 0x60, 0xC4, 0xC4, 0x60, 0xC4, 0xC4, 0x60, 0xC4, 0xC4, 0x60 }

2
keyboards/keychron/s1/ansi/rgb/config.h
View file

@ -24,7 +24,7 @@
#define DRIVER_2_LED_TOTAL 38
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
#define SNLED27351_CURRENT_TUNE \
{ 0xA0, 0xA0, 0x48, 0xA0, 0xA0, 0x48, 0xA0, 0xA0, 0x48, 0xA0, 0xA0, 0x48 }

2
keyboards/keychron/s1/ansi/white/config.h
View file

@ -22,7 +22,7 @@
#define DRIVER_1_LED_TOTAL 84
#define LED_MATRIX_LED_COUNT DRIVER_1_LED_TOTAL
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_6CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_6_CHANNEL
#define SNLED27351_CURRENT_TUNE \
{ 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80 } // 250mA
// { 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40 } // 127mA

2
keyboards/keychron/v1/config.h
View file

@ -43,7 +43,7 @@
#define I2C1_TIMINGR_SCLH 15U
#define I2C1_TIMINGR_SCLL 51U
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
/* turn off effects when suspended */
#define RGB_DISABLE_WHEN_USB_SUSPENDED

2
keyboards/keychron/v10/config.h
View file

@ -42,7 +42,7 @@
#define I2C1_TIMINGR_SCLH 15U
#define I2C1_TIMINGR_SCLL 51U
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
#define SNLED27351_CURRENT_TUNE { 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A, 0x98, 0x98, 0x4A }
/* DIP switch */

2
keyboards/keychron/v2/config.h
View file

@ -31,7 +31,7 @@
#define I2C1_TIMINGR_SCLH 15U
#define I2C1_TIMINGR_SCLL 51U
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
/* Disable DIP switch in matrix data */
#define MATRIX_MASKED

2
keyboards/keychron/v3/config.h
View file

@ -31,7 +31,7 @@
#define I2C1_TIMINGR_SCLH 15U
#define I2C1_TIMINGR_SCLL 51U
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
/* DIP switch */
#define DIP_SWITCH_MATRIX_GRID { {5, 4} }

2
keyboards/keychron/v7/config.h
View file

@ -28,7 +28,7 @@
#define I2C1_TIMINGR_SCLH 15U
#define I2C1_TIMINGR_SCLL 51U
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
#define SNLED27351_CURRENT_TUNE { 0xFC, 0xFC, 0x70, 0xFC, 0xFC, 0x70, 0xFC, 0xFC, 0x70, 0xFC, 0xFC, 0x70 }
/* DIP switch */

2
keyboards/keychron/v8/config.h
View file

@ -31,7 +31,7 @@
#define I2C1_TIMINGR_SCLH 15U
#define I2C1_TIMINGR_SCLL 51U
#define SNLED27351_PHASE_CHANNEL SNLED27351_MSKPHASE_9CHANNEL
#define SNLED27351_PHASE_CHANNEL SNLED27351_SCAN_PHASE_9_CHANNEL
#define SNLED27351_CURRENT_TUNE { 0xC4, 0xC4, 0x60, 0xC4, 0xC4, 0x60, 0xC4, 0xC4, 0x60, 0xC4, 0xC4, 0x60 }
/* DIP switch */